Contract Source Code:
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Callback for IAlgebraPoolActions#swap
/// @notice Any contract that calls IAlgebraPoolActions#swap must implement this interface
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-core/tree/main/contracts/interfaces
interface IAlgebraSwapCallback {
/// @notice Called to `msg.sender` after executing a swap via IAlgebraPool#swap.
/// @dev In the implementation you must pay the pool tokens owed for the swap.
/// The caller of this method must be checked to be a AlgebraPool deployed by the canonical AlgebraFactory.
/// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
/// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
/// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
/// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
/// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
/// @param data Any data passed through by the caller via the IAlgebraPoolActions#swap call
function algebraSwapCallback(
int256 amount0Delta,
int256 amount1Delta,
bytes calldata data
) external;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
import './pool/IAlgebraPoolImmutables.sol';
import './pool/IAlgebraPoolState.sol';
import './pool/IAlgebraPoolDerivedState.sol';
import './pool/IAlgebraPoolActions.sol';
import './pool/IAlgebraPoolPermissionedActions.sol';
import './pool/IAlgebraPoolEvents.sol';
/**
* @title The interface for a Algebra Pool
* @dev The pool interface is broken up into many smaller pieces.
* Credit to Uniswap Labs under GPL-2.0-or-later license:
* https://github.com/Uniswap/v3-core/tree/main/contracts/interfaces
*/
interface IAlgebraPool is
IAlgebraPoolImmutables,
IAlgebraPoolState,
IAlgebraPoolDerivedState,
IAlgebraPoolActions,
IAlgebraPoolPermissionedActions,
IAlgebraPoolEvents
{
// used only for combining interfaces
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
pragma abicoder v2;
import '../libraries/AdaptiveFee.sol';
interface IDataStorageOperator {
event FeeConfiguration(bool zto, AdaptiveFee.Configuration feeConfig);
/**
* @notice Returns data belonging to a certain timepoint
* @param index The index of timepoint in the array
* @dev There is more convenient function to fetch a timepoint: getTimepoints(). Which requires not an index but seconds
* @return initialized Whether the timepoint has been initialized and the values are safe to use,
* blockTimestamp The timestamp of the observation,
* tickCumulative The tick multiplied by seconds elapsed for the life of the pool as of the timepoint timestamp,
* secondsPerLiquidityCumulative The seconds per in range liquidity for the life of the pool as of the timepoint timestamp,
* volatilityCumulative Cumulative standard deviation for the life of the pool as of the timepoint timestamp,
* averageTick Time-weighted average tick,
* volumePerLiquidityCumulative Cumulative swap volume per liquidity for the life of the pool as of the timepoint timestamp
*/
function timepoints(
uint256 index
)
external
view
returns (
bool initialized,
uint32 blockTimestamp,
int56 tickCumulative,
uint160 secondsPerLiquidityCumulative,
uint88 volatilityCumulative,
int24 averageTick,
uint144 volumePerLiquidityCumulative
);
/// @notice Initialize the dataStorage array by writing the first slot. Called once for the lifecycle of the timepoints array
/// @param time The time of the dataStorage initialization, via block.timestamp truncated to uint32
/// @param tick Initial tick
function initialize(uint32 time, int24 tick) external;
/// @dev Reverts if an timepoint at or before the desired timepoint timestamp does not exist.
/// 0 may be passed as `secondsAgo' to return the current cumulative values.
/// If called with a timestamp falling between two timepoints, returns the counterfactual accumulator values
/// at exactly the timestamp between the two timepoints.
/// @param time The current block timestamp
/// @param secondsAgo The amount of time to look back, in seconds, at which point to return an timepoint
/// @param tick The current tick
/// @param index The index of the timepoint that was most recently written to the timepoints array
/// @param liquidity The current in-range pool liquidity
/// @return tickCumulative The cumulative tick since the pool was first initialized, as of `secondsAgo`
/// @return secondsPerLiquidityCumulative The cumulative seconds / max(1, liquidity) since the pool was first initialized, as of `secondsAgo`
/// @return volatilityCumulative The cumulative volatility value since the pool was first initialized, as of `secondsAgo`
/// @return volumePerAvgLiquidity The cumulative volume per liquidity value since the pool was first initialized, as of `secondsAgo`
function getSingleTimepoint(
uint32 time,
uint32 secondsAgo,
int24 tick,
uint16 index,
uint128 liquidity
) external view returns (int56 tickCumulative, uint160 secondsPerLiquidityCumulative, uint112 volatilityCumulative, uint256 volumePerAvgLiquidity);
/// @notice Returns the accumulator values as of each time seconds ago from the given time in the array of `secondsAgos`
/// @dev Reverts if `secondsAgos` > oldest timepoint
/// @param time The current block.timestamp
/// @param secondsAgos Each amount of time to look back, in seconds, at which point to return an timepoint
/// @param tick The current tick
/// @param index The index of the timepoint that was most recently written to the timepoints array
/// @param liquidity The current in-range pool liquidity
/// @return tickCumulatives The cumulative tick since the pool was first initialized, as of each `secondsAgo`
/// @return secondsPerLiquidityCumulatives The cumulative seconds / max(1, liquidity) since the pool was first initialized, as of each `secondsAgo`
/// @return volatilityCumulatives The cumulative volatility values since the pool was first initialized, as of each `secondsAgo`
/// @return volumePerAvgLiquiditys The cumulative volume per liquidity values since the pool was first initialized, as of each `secondsAgo`
function getTimepoints(
uint32 time,
uint32[] memory secondsAgos,
int24 tick,
uint16 index,
uint128 liquidity
)
external
view
returns (
int56[] memory tickCumulatives,
uint160[] memory secondsPerLiquidityCumulatives,
uint112[] memory volatilityCumulatives,
uint256[] memory volumePerAvgLiquiditys
);
/// @notice Returns average volatility in the range from time-WINDOW to time
/// @param time The current block.timestamp
/// @param tick The current tick
/// @param index The index of the timepoint that was most recently written to the timepoints array
/// @param liquidity The current in-range pool liquidity
/// @return TWVolatilityAverage The average volatility in the recent range
/// @return TWVolumePerLiqAverage The average volume per liquidity in the recent range
function getAverages(
uint32 time,
int24 tick,
uint16 index,
uint128 liquidity
) external view returns (uint112 TWVolatilityAverage, uint256 TWVolumePerLiqAverage);
/// @notice Writes an dataStorage timepoint to the array
/// @dev Writable at most once per block. Index represents the most recently written element. index must be tracked externally.
/// @param index The index of the timepoint that was most recently written to the timepoints array
/// @param blockTimestamp The timestamp of the new timepoint
/// @param tick The active tick at the time of the new timepoint
/// @param liquidity The total in-range liquidity at the time of the new timepoint
/// @param volumePerLiquidity The gmean(volumes)/liquidity at the time of the new timepoint
/// @return indexUpdated The new index of the most recently written element in the dataStorage array
function write(
uint16 index,
uint32 blockTimestamp,
int24 tick,
uint128 liquidity,
uint128 volumePerLiquidity
) external returns (uint16 indexUpdated);
/// @notice Changes fee configuration for the pool
function changeFeeConfiguration(bool zto, AdaptiveFee.Configuration calldata feeConfig) external;
/// @notice Calculates gmean(volume/liquidity) for block
/// @param liquidity The current in-range pool liquidity
/// @param amount0 Total amount of swapped token0
/// @param amount1 Total amount of swapped token1
/// @return volumePerLiquidity gmean(volume/liquidity) capped by 100000 << 64
function calculateVolumePerLiquidity(uint128 liquidity, int256 amount0, int256 amount1) external pure returns (uint128 volumePerLiquidity);
/// @return windowLength Length of window used to calculate averages
function window() external view returns (uint32 windowLength);
/// @notice Calculates fee based on combination of sigmoids
/// @param time The current block.timestamp
/// @param tick The current tick
/// @param index The index of the timepoint that was most recently written to the timepoints array
/// @param liquidity The current in-range pool liquidity
/// @return feeZto The fee for ZtO swaps in hundredths of a bip, i.e. 1e-6
/// @return feeOtz The fee for OtZ swaps in hundredths of a bip, i.e. 1e-6
function getFees(uint32 time, int24 tick, uint16 index, uint128 liquidity) external view returns (uint16 feeZto, uint16 feeOtz);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Permissionless pool actions
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-core/tree/main/contracts/interfaces
interface IAlgebraPoolActions {
/**
* @notice Sets the initial price for the pool
* @dev Price is represented as a sqrt(amountToken1/amountToken0) Q64.96 value
* @param price the initial sqrt price of the pool as a Q64.96
*/
function initialize(uint160 price) external;
/**
* @notice Adds liquidity for the given recipient/bottomTick/topTick position
* @dev The caller of this method receives a callback in the form of IAlgebraMintCallback# AlgebraMintCallback
* in which they must pay any token0 or token1 owed for the liquidity. The amount of token0/token1 due depends
* on bottomTick, topTick, the amount of liquidity, and the current price.
* @param sender The address which will receive potential surplus of paid tokens
* @param recipient The address for which the liquidity will be created
* @param bottomTick The lower tick of the position in which to add liquidity
* @param topTick The upper tick of the position in which to add liquidity
* @param amount The desired amount of liquidity to mint
* @param data Any data that should be passed through to the callback
* @return amount0 The amount of token0 that was paid to mint the given amount of liquidity. Matches the value in the callback
* @return amount1 The amount of token1 that was paid to mint the given amount of liquidity. Matches the value in the callback
* @return liquidityActual The actual minted amount of liquidity
*/
function mint(
address sender,
address recipient,
int24 bottomTick,
int24 topTick,
uint128 amount,
bytes calldata data
)
external
returns (
uint256 amount0,
uint256 amount1,
uint128 liquidityActual
);
/**
* @notice Collects tokens owed to a position
* @dev Does not recompute fees earned, which must be done either via mint or burn of any amount of liquidity.
* Collect must be called by the position owner. To withdraw only token0 or only token1, amount0Requested or
* amount1Requested may be set to zero. To withdraw all tokens owed, caller may pass any value greater than the
* actual tokens owed, e.g. type(uint128).max. Tokens owed may be from accumulated swap fees or burned liquidity.
* @param recipient The address which should receive the fees collected
* @param bottomTick The lower tick of the position for which to collect fees
* @param topTick The upper tick of the position for which to collect fees
* @param amount0Requested How much token0 should be withdrawn from the fees owed
* @param amount1Requested How much token1 should be withdrawn from the fees owed
* @return amount0 The amount of fees collected in token0
* @return amount1 The amount of fees collected in token1
*/
function collect(
address recipient,
int24 bottomTick,
int24 topTick,
uint128 amount0Requested,
uint128 amount1Requested
) external returns (uint128 amount0, uint128 amount1);
/**
* @notice Burn liquidity from the sender and account tokens owed for the liquidity to the position
* @dev Can be used to trigger a recalculation of fees owed to a position by calling with an amount of 0
* @dev Fees must be collected separately via a call to #collect
* @param bottomTick The lower tick of the position for which to burn liquidity
* @param topTick The upper tick of the position for which to burn liquidity
* @param amount How much liquidity to burn
* @return amount0 The amount of token0 sent to the recipient
* @return amount1 The amount of token1 sent to the recipient
*/
function burn(
int24 bottomTick,
int24 topTick,
uint128 amount
) external returns (uint256 amount0, uint256 amount1);
/**
* @notice Swap token0 for token1, or token1 for token0
* @dev The caller of this method receives a callback in the form of IAlgebraSwapCallback# AlgebraSwapCallback
* @param recipient The address to receive the output of the swap
* @param zeroToOne The direction of the swap, true for token0 to token1, false for token1 to token0
* @param amountSpecified The amount of the swap, which implicitly configures the swap as exact input (positive), or exact output (negative)
* @param limitSqrtPrice The Q64.96 sqrt price limit. If zero for one, the price cannot be less than this
* value after the swap. If one for zero, the price cannot be greater than this value after the swap
* @param data Any data to be passed through to the callback. If using the Router it should contain
* SwapRouter#SwapCallbackData
* @return amount0 The delta of the balance of token0 of the pool, exact when negative, minimum when positive
* @return amount1 The delta of the balance of token1 of the pool, exact when negative, minimum when positive
*/
function swap(
address recipient,
bool zeroToOne,
int256 amountSpecified,
uint160 limitSqrtPrice,
bytes calldata data
) external returns (int256 amount0, int256 amount1);
/**
* @notice Swap token0 for token1, or token1 for token0 (tokens that have fee on transfer)
* @dev The caller of this method receives a callback in the form of I AlgebraSwapCallback# AlgebraSwapCallback
* @param sender The address called this function (Comes from the Router)
* @param recipient The address to receive the output of the swap
* @param zeroToOne The direction of the swap, true for token0 to token1, false for token1 to token0
* @param amountSpecified The amount of the swap, which implicitly configures the swap as exact input (positive), or exact output (negative)
* @param limitSqrtPrice The Q64.96 sqrt price limit. If zero for one, the price cannot be less than this
* value after the swap. If one for zero, the price cannot be greater than this value after the swap
* @param data Any data to be passed through to the callback. If using the Router it should contain
* SwapRouter#SwapCallbackData
* @return amount0 The delta of the balance of token0 of the pool, exact when negative, minimum when positive
* @return amount1 The delta of the balance of token1 of the pool, exact when negative, minimum when positive
*/
function swapSupportingFeeOnInputTokens(
address sender,
address recipient,
bool zeroToOne,
int256 amountSpecified,
uint160 limitSqrtPrice,
bytes calldata data
) external returns (int256 amount0, int256 amount1);
/**
* @notice Receive token0 and/or token1 and pay it back, plus a fee, in the callback
* @dev The caller of this method receives a callback in the form of IAlgebraFlashCallback# AlgebraFlashCallback
* @dev All excess tokens paid in the callback are distributed to liquidity providers as an additional fee. So this method can be used
* to donate underlying tokens to currently in-range liquidity providers by calling with 0 amount{0,1} and sending
* the donation amount(s) from the callback
* @param recipient The address which will receive the token0 and token1 amounts
* @param amount0 The amount of token0 to send
* @param amount1 The amount of token1 to send
* @param data Any data to be passed through to the callback
*/
function flash(
address recipient,
uint256 amount0,
uint256 amount1,
bytes calldata data
) external;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/**
* @title Pool state that is not stored
* @notice Contains view functions to provide information about the pool that is computed rather than stored on the
* blockchain. The functions here may have variable gas costs.
* @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
* https://github.com/Uniswap/v3-core/tree/main/contracts/interfaces
*/
interface IAlgebraPoolDerivedState {
/**
* @notice Returns the cumulative tick and liquidity as of each timestamp `secondsAgo` from the current block timestamp
* @dev To get a time weighted average tick or liquidity-in-range, you must call this with two values, one representing
* the beginning of the period and another for the end of the period. E.g., to get the last hour time-weighted average tick,
* you must call it with secondsAgos = [3600, 0].
* @dev The time weighted average tick represents the geometric time weighted average price of the pool, in
* log base sqrt(1.0001) of token1 / token0. The TickMath library can be used to go from a tick value to a ratio.
* @param secondsAgos From how long ago each cumulative tick and liquidity value should be returned
* @return tickCumulatives Cumulative tick values as of each `secondsAgos` from the current block timestamp
* @return secondsPerLiquidityCumulatives Cumulative seconds per liquidity-in-range value as of each `secondsAgos`
* from the current block timestamp
* @return volatilityCumulatives Cumulative standard deviation as of each `secondsAgos`
* @return volumePerAvgLiquiditys Cumulative swap volume per liquidity as of each `secondsAgos`
*/
function getTimepoints(uint32[] calldata secondsAgos)
external
view
returns (
int56[] memory tickCumulatives,
uint160[] memory secondsPerLiquidityCumulatives,
uint112[] memory volatilityCumulatives,
uint256[] memory volumePerAvgLiquiditys
);
/**
* @notice Returns a snapshot of the tick cumulative, seconds per liquidity and seconds inside a tick range
* @dev Snapshots must only be compared to other snapshots, taken over a period for which a position existed.
* I.e., snapshots cannot be compared if a position is not held for the entire period between when the first
* snapshot is taken and the second snapshot is taken.
* @param bottomTick The lower tick of the range
* @param topTick The upper tick of the range
* @return innerTickCumulative The snapshot of the tick accumulator for the range
* @return innerSecondsSpentPerLiquidity The snapshot of seconds per liquidity for the range
* @return innerSecondsSpent The snapshot of the number of seconds during which the price was in this range
*/
function getInnerCumulatives(int24 bottomTick, int24 topTick)
external
view
returns (
int56 innerTickCumulative,
uint160 innerSecondsSpentPerLiquidity,
uint32 innerSecondsSpent
);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Events emitted by a pool
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-core/tree/main/contracts/interfaces
interface IAlgebraPoolEvents {
/**
* @notice Emitted exactly once by a pool when #initialize is first called on the pool
* @dev Mint/Burn/Swap cannot be emitted by the pool before Initialize
* @param price The initial sqrt price of the pool, as a Q64.96
* @param tick The initial tick of the pool, i.e. log base 1.0001 of the starting price of the pool
*/
event Initialize(uint160 price, int24 tick);
/**
* @notice Emitted when liquidity is minted for a given position
* @param sender The address that minted the liquidity
* @param owner The owner of the position and recipient of any minted liquidity
* @param bottomTick The lower tick of the position
* @param topTick The upper tick of the position
* @param liquidityAmount The amount of liquidity minted to the position range
* @param amount0 How much token0 was required for the minted liquidity
* @param amount1 How much token1 was required for the minted liquidity
*/
event Mint(
address sender,
address indexed owner,
int24 indexed bottomTick,
int24 indexed topTick,
uint128 liquidityAmount,
uint256 amount0,
uint256 amount1
);
/**
* @notice Emitted when fees are collected by the owner of a position
* @dev Collect events may be emitted with zero amount0 and amount1 when the caller chooses not to collect fees
* @param owner The owner of the position for which fees are collected
* @param recipient The address that received fees
* @param bottomTick The lower tick of the position
* @param topTick The upper tick of the position
* @param amount0 The amount of token0 fees collected
* @param amount1 The amount of token1 fees collected
*/
event Collect(address indexed owner, address recipient, int24 indexed bottomTick, int24 indexed topTick, uint128 amount0, uint128 amount1);
/**
* @notice Emitted when a position's liquidity is removed
* @dev Does not withdraw any fees earned by the liquidity position, which must be withdrawn via #collect
* @param owner The owner of the position for which liquidity is removed
* @param bottomTick The lower tick of the position
* @param topTick The upper tick of the position
* @param liquidityAmount The amount of liquidity to remove
* @param amount0 The amount of token0 withdrawn
* @param amount1 The amount of token1 withdrawn
*/
event Burn(address indexed owner, int24 indexed bottomTick, int24 indexed topTick, uint128 liquidityAmount, uint256 amount0, uint256 amount1);
/**
* @notice Emitted by the pool for any swaps between token0 and token1
* @param sender The address that initiated the swap call, and that received the callback
* @param recipient The address that received the output of the swap
* @param amount0 The delta of the token0 balance of the pool
* @param amount1 The delta of the token1 balance of the pool
* @param price The sqrt(price) of the pool after the swap, as a Q64.96
* @param liquidity The liquidity of the pool after the swap
* @param tick The log base 1.0001 of price of the pool after the swap
*/
event Swap(address indexed sender, address indexed recipient, int256 amount0, int256 amount1, uint160 price, uint128 liquidity, int24 tick);
/**
* @notice Emitted by the pool for any flashes of token0/token1
* @param sender The address that initiated the swap call, and that received the callback
* @param recipient The address that received the tokens from flash
* @param amount0 The amount of token0 that was flashed
* @param amount1 The amount of token1 that was flashed
* @param paid0 The amount of token0 paid for the flash, which can exceed the amount0 plus the fee
* @param paid1 The amount of token1 paid for the flash, which can exceed the amount1 plus the fee
*/
event Flash(address indexed sender, address indexed recipient, uint256 amount0, uint256 amount1, uint256 paid0, uint256 paid1);
/**
* @notice Emitted when the community fee is changed by the pool
* @param communityFee0New The updated value of the token0 community fee percent
* @param communityFee1New The updated value of the token1 community fee percent
*/
event CommunityFee(uint8 communityFee0New, uint8 communityFee1New);
/**
* @notice Emitted when new activeIncentive is set
* @param virtualPoolAddress The address of a virtual pool associated with the current active incentive
*/
event Incentive(address indexed virtualPoolAddress);
/**
* @notice Emitted when the fee changes
* @param feeZto The value of the token fee for zto swaps
* @param feeOtz The value of the token fee for otz swaps
*/
event Fee(uint16 feeZto, uint16 feeOtz);
/**
* @notice Emitted when the LiquidityCooldown changes
* @param liquidityCooldown The value of locktime for added liquidity
*/
event LiquidityCooldown(uint32 liquidityCooldown);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
import '../IDataStorageOperator.sol';
/// @title Pool state that never changes
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-core/tree/main/contracts/interfaces
interface IAlgebraPoolImmutables {
/**
* @notice The contract that stores all the timepoints and can perform actions with them
* @return The operator address
*/
function dataStorageOperator() external view returns (address);
/**
* @notice The contract that deployed the pool, which must adhere to the IAlgebraFactory interface
* @return The contract address
*/
function factory() external view returns (address);
/**
* @notice The first of the two tokens of the pool, sorted by address
* @return The token contract address
*/
function token0() external view returns (address);
/**
* @notice The second of the two tokens of the pool, sorted by address
* @return The token contract address
*/
function token1() external view returns (address);
/**
* @notice The pool tick spacing
* @dev Ticks can only be used at multiples of this value
* e.g.: a tickSpacing of 60 means ticks can be initialized every 60th tick, i.e., ..., -120, -60, 0, 60, 120, ...
* This value is an int24 to avoid casting even though it is always positive.
* @return The tick spacing
*/
function tickSpacing() external view returns (int24);
/**
* @notice The maximum amount of position liquidity that can use any tick in the range
* @dev This parameter is enforced per tick to prevent liquidity from overflowing a uint128 at any point, and
* also prevents out-of-range liquidity from being used to prevent adding in-range liquidity to a pool
* @return The max amount of liquidity per tick
*/
function maxLiquidityPerTick() external view returns (uint128);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/**
* @title Permissioned pool actions
* @notice Contains pool methods that may only be called by the factory owner or tokenomics
* @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
* https://github.com/Uniswap/v3-core/tree/main/contracts/interfaces
*/
interface IAlgebraPoolPermissionedActions {
/**
* @notice Set the community's % share of the fees. Cannot exceed 25% (250)
* @param communityFee0 new community fee percent for token0 of the pool in thousandths (1e-3)
* @param communityFee1 new community fee percent for token1 of the pool in thousandths (1e-3)
*/
function setCommunityFee(uint8 communityFee0, uint8 communityFee1) external;
/**
* @notice Sets an active incentive
* @param virtualPoolAddress The address of a virtual pool associated with the incentive
*/
function setIncentive(address virtualPoolAddress) external;
/**
* @notice Sets new lock time for added liquidity
* @param newLiquidityCooldown The time in seconds
*/
function setLiquidityCooldown(uint32 newLiquidityCooldown) external;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Pool state that can change
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-core/tree/main/contracts/interfaces
interface IAlgebraPoolState {
/**
* @notice The globalState structure in the pool stores many values but requires only one slot
* and is exposed as a single method to save gas when accessed externally.
* @return price The current price of the pool as a sqrt(token1/token0) Q64.96 value;
* Returns tick The current tick of the pool, i.e. according to the last tick transition that was run;
* Returns This value may not always be equal to SqrtTickMath.getTickAtSqrtRatio(price) if the price is on a tick
* boundary;
* Returns feeZto The last pool fee value for ZtO swaps in hundredths of a bip, i.e. 1e-6;
* Returns feeOtz The last pool fee value for OtZ swaps in hundredths of a bip, i.e. 1e-6;
* Returns timepointIndex The index of the last written timepoint;
* Returns communityFeeToken0 The community fee percentage of the swap fee in thousandths (1e-3) for token0;
* Returns communityFeeToken1 The community fee percentage of the swap fee in thousandths (1e-3) for token1;
* Returns unlocked Whether the pool is currently locked to reentrancy;
*/
function globalState()
external
view
returns (
uint160 price,
int24 tick,
uint16 feeZto,
uint16 feeOtz,
uint16 timepointIndex,
uint8 communityFeeToken0,
uint8 communityFeeToken1,
bool unlocked
);
/**
* @notice The fee growth as a Q128.128 fees of token0 collected per unit of liquidity for the entire life of the pool
* @dev This value can overflow the uint256
*/
function totalFeeGrowth0Token() external view returns (uint256);
/**
* @notice The fee growth as a Q128.128 fees of token1 collected per unit of liquidity for the entire life of the pool
* @dev This value can overflow the uint256
*/
function totalFeeGrowth1Token() external view returns (uint256);
/**
* @notice The currently in range liquidity available to the pool
* @dev This value has no relationship to the total liquidity across all ticks.
* Returned value cannot exceed type(uint128).max
*/
function liquidity() external view returns (uint128);
/**
* @notice Look up information about a specific tick in the pool
* @dev This is a public structure, so the `return` natspec tags are omitted.
* @param tick The tick to look up
* @return liquidityTotal the total amount of position liquidity that uses the pool either as tick lower or
* tick upper;
* Returns liquidityDelta how much liquidity changes when the pool price crosses the tick;
* Returns outerFeeGrowth0Token the fee growth on the other side of the tick from the current tick in token0;
* Returns outerFeeGrowth1Token the fee growth on the other side of the tick from the current tick in token1;
* Returns outerTickCumulative the cumulative tick value on the other side of the tick from the current tick;
* Returns outerSecondsPerLiquidity the seconds spent per liquidity on the other side of the tick from the current tick;
* Returns outerSecondsSpent the seconds spent on the other side of the tick from the current tick;
* Returns initialized Set to true if the tick is initialized, i.e. liquidityTotal is greater than 0
* otherwise equal to false. Outside values can only be used if the tick is initialized.
* In addition, these values are only relative and must be used only in comparison to previous snapshots for
* a specific position.
*/
function ticks(
int24 tick
)
external
view
returns (
uint128 liquidityTotal,
int128 liquidityDelta,
uint256 outerFeeGrowth0Token,
uint256 outerFeeGrowth1Token,
int56 outerTickCumulative,
uint160 outerSecondsPerLiquidity,
uint32 outerSecondsSpent,
bool initialized
);
/** @notice Returns 256 packed tick initialized boolean values. See TickTable for more information */
function tickTable(int16 wordPosition) external view returns (uint256);
/**
* @notice Returns the information about a position by the position's key
* @dev This is a public mapping of structures, so the `return` natspec tags are omitted.
* @param key The position's key is a hash of a preimage composed by the owner, bottomTick and topTick
* @return liquidityAmount The amount of liquidity in the position;
* Returns lastLiquidityAddTimestamp Timestamp of last adding of liquidity;
* Returns innerFeeGrowth0Token Fee growth of token0 inside the tick range as of the last mint/burn/poke;
* Returns innerFeeGrowth1Token Fee growth of token1 inside the tick range as of the last mint/burn/poke;
* Returns fees0 The computed amount of token0 owed to the position as of the last mint/burn/poke;
* Returns fees1 The computed amount of token1 owed to the position as of the last mint/burn/poke
*/
function positions(
bytes32 key
)
external
view
returns (
uint128 liquidityAmount,
uint32 lastLiquidityAddTimestamp,
uint256 innerFeeGrowth0Token,
uint256 innerFeeGrowth1Token,
uint128 fees0,
uint128 fees1
);
/**
* @notice Returns data about a specific timepoint index
* @param index The element of the timepoints array to fetch
* @dev You most likely want to use #getTimepoints() instead of this method to get an timepoint as of some amount of time
* ago, rather than at a specific index in the array.
* This is a public mapping of structures, so the `return` natspec tags are omitted.
* @return initialized whether the timepoint has been initialized and the values are safe to use;
* Returns blockTimestamp The timestamp of the timepoint;
* Returns tickCumulative the tick multiplied by seconds elapsed for the life of the pool as of the timepoint timestamp;
* Returns secondsPerLiquidityCumulative the seconds per in range liquidity for the life of the pool as of the timepoint timestamp;
* Returns volatilityCumulative Cumulative standard deviation for the life of the pool as of the timepoint timestamp;
* Returns averageTick Time-weighted average tick;
* Returns volumePerLiquidityCumulative Cumulative swap volume per liquidity for the life of the pool as of the timepoint timestamp;
*/
function timepoints(
uint256 index
)
external
view
returns (
bool initialized,
uint32 blockTimestamp,
int56 tickCumulative,
uint160 secondsPerLiquidityCumulative,
uint88 volatilityCumulative,
int24 averageTick,
uint144 volumePerLiquidityCumulative
);
/**
* @notice Returns the information about active incentive
* @dev if there is no active incentive at the moment, virtualPool,endTimestamp,startTimestamp would be equal to 0
* @return virtualPool The address of a virtual pool associated with the current active incentive
*/
function activeIncentive() external view returns (address virtualPool);
/**
* @notice Returns the lock time for added liquidity
*/
function liquidityCooldown() external view returns (uint32 cooldownInSeconds);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity =0.7.6;
import './Constants.sol';
/// @title AdaptiveFee
/// @notice Calculates fee based on combination of sigmoids
library AdaptiveFee {
// alpha1 + alpha2 + baseFee must be <= type(uint16).max
struct Configuration {
uint16 alpha1; // max value of the first sigmoid
uint16 alpha2; // max value of the second sigmoid
uint32 beta1; // shift along the x-axis for the first sigmoid
uint32 beta2; // shift along the x-axis for the second sigmoid
uint16 gamma1; // horizontal stretch factor for the first sigmoid
uint16 gamma2; // horizontal stretch factor for the second sigmoid
uint32 volumeBeta; // shift along the x-axis for the outer volume-sigmoid
uint16 volumeGamma; // horizontal stretch factor the outer volume-sigmoid
uint16 baseFee; // minimum possible fee
}
/// @notice Calculates fee based on formula:
/// baseFee + sigmoidVolume(sigmoid1(volatility, volumePerLiquidity) + sigmoid2(volatility, volumePerLiquidity))
/// maximum value capped by baseFee + alpha1 + alpha2
function getFee(
uint88 volatility,
uint256 volumePerLiquidity,
Configuration memory config
) internal pure returns (uint16 fee) {
uint256 sumOfSigmoids = sigmoid(volatility, config.gamma1, config.alpha1, config.beta1) +
sigmoid(volatility, config.gamma2, config.alpha2, config.beta2);
if (sumOfSigmoids > type(uint16).max) {
// should be impossible, just in case
sumOfSigmoids = type(uint16).max;
}
return uint16(config.baseFee + sigmoid(volumePerLiquidity, config.volumeGamma, uint16(sumOfSigmoids), config.volumeBeta)); // safe since alpha1 + alpha2 + baseFee _must_ be <= type(uint16).max
}
/// @notice calculates α / (1 + e^( (β-x) / γ))
/// that is a sigmoid with a maximum value of α, x-shifted by β, and stretched by γ
/// @dev returns uint256 for fuzzy testing. Guaranteed that the result is not greater than alpha
function sigmoid(
uint256 x,
uint16 g,
uint16 alpha,
uint256 beta
) internal pure returns (uint256 res) {
if (x > beta) {
x = x - beta;
if (x >= 6 * uint256(g)) return alpha; // so x < 19 bits
uint256 g8 = uint256(g)**8; // < 128 bits (8*16)
uint256 ex = exp(x, g, g8); // < 155 bits
res = (alpha * ex) / (g8 + ex); // in worst case: (16 + 155 bits) / 155 bits
// so res <= alpha
} else {
x = beta - x;
if (x >= 6 * uint256(g)) return 0; // so x < 19 bits
uint256 g8 = uint256(g)**8; // < 128 bits (8*16)
uint256 ex = g8 + exp(x, g, g8); // < 156 bits
res = (alpha * g8) / ex; // in worst case: (16 + 128 bits) / 156 bits
// g8 <= ex, so res <= alpha
}
}
/// @notice calculates e^(x/g) * g^8 in a series, since (around zero):
/// e^x = 1 + x + x^2/2 + ... + x^n/n! + ...
/// e^(x/g) = 1 + x/g + x^2/(2*g^2) + ... + x^(n)/(g^n * n!) + ...
function exp(
uint256 x,
uint16 g,
uint256 gHighestDegree
) internal pure returns (uint256 res) {
// calculating:
// g**8 + x * g**7 + (x**2 * g**6) / 2 + (x**3 * g**5) / 6 + (x**4 * g**4) / 24 + (x**5 * g**3) / 120 + (x**6 * g^2) / 720 + x**7 * g / 5040 + x**8 / 40320
// x**8 < 152 bits (19*8) and g**8 < 128 bits (8*16)
// so each summand < 152 bits and res < 155 bits
uint256 xLowestDegree = x;
res = gHighestDegree; // g**8
gHighestDegree /= g; // g**7
res += xLowestDegree * gHighestDegree;
gHighestDegree /= g; // g**6
xLowestDegree *= x; // x**2
res += (xLowestDegree * gHighestDegree) / 2;
gHighestDegree /= g; // g**5
xLowestDegree *= x; // x**3
res += (xLowestDegree * gHighestDegree) / 6;
gHighestDegree /= g; // g**4
xLowestDegree *= x; // x**4
res += (xLowestDegree * gHighestDegree) / 24;
gHighestDegree /= g; // g**3
xLowestDegree *= x; // x**5
res += (xLowestDegree * gHighestDegree) / 120;
gHighestDegree /= g; // g**2
xLowestDegree *= x; // x**6
res += (xLowestDegree * gHighestDegree) / 720;
xLowestDegree *= x; // x**7
res += (xLowestDegree * g) / 5040 + (xLowestDegree * x) / (40320);
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity =0.7.6;
library Constants {
uint8 internal constant RESOLUTION = 96;
uint256 internal constant Q96 = 0x1000000000000000000000000;
uint256 internal constant Q128 = 0x100000000000000000000000000000000;
// fee value in hundredths of a bip, i.e. 1e-6
uint16 internal constant BASE_FEE = 100;
int24 internal constant TICK_SPACING = 60;
// max(uint128) / ( (MAX_TICK - MIN_TICK) / TICK_SPACING )
uint128 internal constant MAX_LIQUIDITY_PER_TICK = 11505743598341114571880798222544994;
uint32 internal constant MAX_LIQUIDITY_COOLDOWN = 1 days;
uint8 internal constant MAX_COMMUNITY_FEE = 250;
uint256 internal constant COMMUNITY_FEE_DENOMINATOR = 1000;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.4.0 || ^0.5.0 || ^0.6.0 || ^0.7.0;
/// @title Contains 512-bit math functions
/// @notice Facilitates multiplication and division that can have overflow of an intermediate value without any loss of precision
/// @dev Handles "phantom overflow" i.e., allows multiplication and division where an intermediate value overflows 256 bits
library FullMath {
/// @notice Calculates floor(a×b÷denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
/// @param a The multiplicand
/// @param b The multiplier
/// @param denominator The divisor
/// @return result The 256-bit result
/// @dev Credit to Remco Bloemen under MIT license https://xn--2-umb.com/21/muldiv
function mulDiv(
uint256 a,
uint256 b,
uint256 denominator
) internal pure returns (uint256 result) {
// 512-bit multiply [prod1 prod0] = a * b
// Compute the product mod 2**256 and mod 2**256 - 1
// then use the Chinese Remainder Theorem to reconstruct
// the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2**256 + prod0
uint256 prod0 = a * b; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(a, b, not(0))
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Make sure the result is less than 2**256.
// Also prevents denominator == 0
require(denominator > prod1);
// Handle non-overflow cases, 256 by 256 division
if (prod1 == 0) {
assembly {
result := div(prod0, denominator)
}
return result;
}
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0]
// Compute remainder using mulmod
// Subtract 256 bit remainder from 512 bit number
assembly {
let remainder := mulmod(a, b, denominator)
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator
// Compute largest power of two divisor of denominator.
// Always >= 1.
uint256 twos = -denominator & denominator;
// Divide denominator by power of two
assembly {
denominator := div(denominator, twos)
}
// Divide [prod1 prod0] by the factors of two
assembly {
prod0 := div(prod0, twos)
}
// Shift in bits from prod1 into prod0. For this we need
// to flip `twos` such that it is 2**256 / twos.
// If twos is zero, then it becomes one
assembly {
twos := add(div(sub(0, twos), twos), 1)
}
prod0 |= prod1 * twos;
// Invert denominator mod 2**256
// Now that denominator is an odd number, it has an inverse
// modulo 2**256 such that denominator * inv = 1 mod 2**256.
// Compute the inverse by starting with a seed that is correct
// correct for four bits. That is, denominator * inv = 1 mod 2**4
uint256 inv = (3 * denominator) ^ 2;
// Now use Newton-Raphson iteration to improve the precision.
// Thanks to Hensel's lifting lemma, this also works in modular
// arithmetic, doubling the correct bits in each step.
inv *= 2 - denominator * inv; // inverse mod 2**8
inv *= 2 - denominator * inv; // inverse mod 2**16
inv *= 2 - denominator * inv; // inverse mod 2**32
inv *= 2 - denominator * inv; // inverse mod 2**64
inv *= 2 - denominator * inv; // inverse mod 2**128
inv *= 2 - denominator * inv; // inverse mod 2**256
// Because the division is now exact we can divide by multiplying
// with the modular inverse of denominator. This will give us the
// correct result modulo 2**256. Since the preconditions guarantee
// that the outcome is less than 2**256, this is the final result.
// We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inv;
return result;
}
/// @notice Calculates ceil(a×b÷denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
/// @param a The multiplicand
/// @param b The multiplier
/// @param denominator The divisor
/// @return result The 256-bit result
function mulDivRoundingUp(
uint256 a,
uint256 b,
uint256 denominator
) internal pure returns (uint256 result) {
if (a == 0 || ((result = a * b) / a == b)) {
require(denominator > 0);
assembly {
result := add(div(result, denominator), gt(mod(result, denominator), 0))
}
} else {
result = mulDiv(a, b, denominator);
if (mulmod(a, b, denominator) > 0) {
require(result < type(uint256).max);
result++;
}
}
}
/// @notice Returns ceil(x / y)
/// @dev division by 0 has unspecified behavior, and must be checked externally
/// @param x The dividend
/// @param y The divisor
/// @return z The quotient, ceil(x / y)
function divRoundingUp(uint256 x, uint256 y) internal pure returns (uint256 z) {
assembly {
z := add(div(x, y), gt(mod(x, y), 0))
}
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Safe casting methods
/// @notice Contains methods for safely casting between types
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-core/blob/main/contracts/libraries
library SafeCast {
/// @notice Cast a uint256 to a uint160, revert on overflow
/// @param y The uint256 to be downcasted
/// @return z The downcasted integer, now type uint160
function toUint160(uint256 y) internal pure returns (uint160 z) {
require((z = uint160(y)) == y);
}
/// @notice Cast a int256 to a int128, revert on overflow or underflow
/// @param y The int256 to be downcasted
/// @return z The downcasted integer, now type int128
function toInt128(int256 y) internal pure returns (int128 z) {
require((z = int128(y)) == y);
}
/// @notice Cast a uint256 to a int256, revert on overflow
/// @param y The uint256 to be casted
/// @return z The casted integer, now type int256
function toInt256(uint256 y) internal pure returns (int256 z) {
require(y < 2**255);
z = int256(y);
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Math library for computing sqrt prices from ticks and vice versa
/// @notice Computes sqrt price for ticks of size 1.0001, i.e. sqrt(1.0001^tick) as fixed point Q64.96 numbers. Supports
/// prices between 2**-128 and 2**128
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-core/blob/main/contracts/libraries
library TickMath {
/// @dev The minimum tick that may be passed to #getSqrtRatioAtTick computed from log base 1.0001 of 2**-128
int24 internal constant MIN_TICK = -887272;
/// @dev The maximum tick that may be passed to #getSqrtRatioAtTick computed from log base 1.0001 of 2**128
int24 internal constant MAX_TICK = -MIN_TICK;
/// @dev The minimum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MIN_TICK)
uint160 internal constant MIN_SQRT_RATIO = 4295128739;
/// @dev The maximum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MAX_TICK)
uint160 internal constant MAX_SQRT_RATIO = 1461446703485210103287273052203988822378723970342;
/// @notice Calculates sqrt(1.0001^tick) * 2^96
/// @dev Throws if |tick| > max tick
/// @param tick The input tick for the above formula
/// @return price A Fixed point Q64.96 number representing the sqrt of the ratio of the two assets (token1/token0)
/// at the given tick
function getSqrtRatioAtTick(int24 tick) internal pure returns (uint160 price) {
// get abs value
int24 mask = tick >> (24 - 1);
uint256 absTick = uint256((tick ^ mask) - mask);
require(absTick <= uint256(MAX_TICK), 'T');
uint256 ratio = absTick & 0x1 != 0 ? 0xfffcb933bd6fad37aa2d162d1a594001 : 0x100000000000000000000000000000000;
if (absTick & 0x2 != 0) ratio = (ratio * 0xfff97272373d413259a46990580e213a) >> 128;
if (absTick & 0x4 != 0) ratio = (ratio * 0xfff2e50f5f656932ef12357cf3c7fdcc) >> 128;
if (absTick & 0x8 != 0) ratio = (ratio * 0xffe5caca7e10e4e61c3624eaa0941cd0) >> 128;
if (absTick & 0x10 != 0) ratio = (ratio * 0xffcb9843d60f6159c9db58835c926644) >> 128;
if (absTick & 0x20 != 0) ratio = (ratio * 0xff973b41fa98c081472e6896dfb254c0) >> 128;
if (absTick & 0x40 != 0) ratio = (ratio * 0xff2ea16466c96a3843ec78b326b52861) >> 128;
if (absTick & 0x80 != 0) ratio = (ratio * 0xfe5dee046a99a2a811c461f1969c3053) >> 128;
if (absTick & 0x100 != 0) ratio = (ratio * 0xfcbe86c7900a88aedcffc83b479aa3a4) >> 128;
if (absTick & 0x200 != 0) ratio = (ratio * 0xf987a7253ac413176f2b074cf7815e54) >> 128;
if (absTick & 0x400 != 0) ratio = (ratio * 0xf3392b0822b70005940c7a398e4b70f3) >> 128;
if (absTick & 0x800 != 0) ratio = (ratio * 0xe7159475a2c29b7443b29c7fa6e889d9) >> 128;
if (absTick & 0x1000 != 0) ratio = (ratio * 0xd097f3bdfd2022b8845ad8f792aa5825) >> 128;
if (absTick & 0x2000 != 0) ratio = (ratio * 0xa9f746462d870fdf8a65dc1f90e061e5) >> 128;
if (absTick & 0x4000 != 0) ratio = (ratio * 0x70d869a156d2a1b890bb3df62baf32f7) >> 128;
if (absTick & 0x8000 != 0) ratio = (ratio * 0x31be135f97d08fd981231505542fcfa6) >> 128;
if (absTick & 0x10000 != 0) ratio = (ratio * 0x9aa508b5b7a84e1c677de54f3e99bc9) >> 128;
if (absTick & 0x20000 != 0) ratio = (ratio * 0x5d6af8dedb81196699c329225ee604) >> 128;
if (absTick & 0x40000 != 0) ratio = (ratio * 0x2216e584f5fa1ea926041bedfe98) >> 128;
if (absTick & 0x80000 != 0) ratio = (ratio * 0x48a170391f7dc42444e8fa2) >> 128;
if (tick > 0) ratio = type(uint256).max / ratio;
// this divides by 1<<32 rounding up to go from a Q128.128 to a Q128.96.
// we then downcast because we know the result always fits within 160 bits due to our tick input constraint
// we round up in the division so getTickAtSqrtRatio of the output price is always consistent
price = uint160((ratio >> 32) + (ratio % (1 << 32) == 0 ? 0 : 1));
}
/// @notice Calculates the greatest tick value such that getRatioAtTick(tick) <= ratio
/// @dev Throws in case price < MIN_SQRT_RATIO, as MIN_SQRT_RATIO is the lowest value getRatioAtTick may
/// ever return.
/// @param price The sqrt ratio for which to compute the tick as a Q64.96
/// @return tick The greatest tick for which the ratio is less than or equal to the input ratio
function getTickAtSqrtRatio(uint160 price) internal pure returns (int24 tick) {
// second inequality must be < because the price can never reach the price at the max tick
require(price >= MIN_SQRT_RATIO && price < MAX_SQRT_RATIO, 'R');
uint256 ratio = uint256(price) << 32;
uint256 r = ratio;
uint256 msb = 0;
assembly {
let f := shl(7, gt(r, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(6, gt(r, 0xFFFFFFFFFFFFFFFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(5, gt(r, 0xFFFFFFFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(4, gt(r, 0xFFFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(3, gt(r, 0xFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(2, gt(r, 0xF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(1, gt(r, 0x3))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := gt(r, 0x1)
msb := or(msb, f)
}
if (msb >= 128) r = ratio >> (msb - 127);
else r = ratio << (127 - msb);
int256 log_2 = (int256(msb) - 128) << 64;
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(63, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(62, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(61, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(60, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(59, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(58, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(57, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(56, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(55, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(54, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(53, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(52, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(51, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(50, f))
}
int256 log_sqrt10001 = log_2 * 255738958999603826347141; // 128.128 number
int24 tickLow = int24((log_sqrt10001 - 3402992956809132418596140100660247210) >> 128);
int24 tickHi = int24((log_sqrt10001 + 291339464771989622907027621153398088495) >> 128);
tick = tickLow == tickHi ? tickLow : getSqrtRatioAtTick(tickHi) <= price ? tickHi : tickLow;
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity =0.7.6;
import '../interfaces/IPeripheryImmutableState.sol';
/// @title Immutable state
/// @notice Immutable state used by periphery contracts
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
abstract contract PeripheryImmutableState is IPeripheryImmutableState {
/// @inheritdoc IPeripheryImmutableState
address public immutable override factory;
/// @inheritdoc IPeripheryImmutableState
address public immutable override poolDeployer;
/// @inheritdoc IPeripheryImmutableState
address public immutable override WNativeToken;
constructor(
address _factory,
address _WNativeToken,
address _poolDeployer
) {
factory = _factory;
poolDeployer = _poolDeployer;
WNativeToken = _WNativeToken;
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Immutable state
/// @notice Functions that return immutable state of the router
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
interface IPeripheryImmutableState {
/// @return Returns the address of the Algebra factory
function factory() external view returns (address);
/// @return Returns the address of the pool Deployer
function poolDeployer() external view returns (address);
/// @return Returns the address of WNativeToken
function WNativeToken() external view returns (address);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.7.5;
pragma abicoder v2;
/// @title Quoter Interface
/// @notice Supports quoting the calculated amounts from exact input or exact output swaps
/// @dev These functions are not marked view because they rely on calling non-view functions and reverting
/// to compute the result. They are also not gas efficient and should not be called on-chain.
/// Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
interface IQuoter {
/// @notice Returns the amount out received for a given exact input swap without executing the swap
/// @param path The path of the swap, i.e. each token pair
/// @param amountIn The amount of the first token to swap
/// @return amountOut The amount of the last token that would be received
function quoteExactInput(bytes memory path, uint256 amountIn)
external
returns (uint256 amountOut, uint16[] memory fees);
/// @notice Returns the amount out received for a given exact input but for a swap of a single pool
/// @param tokenIn The token being swapped in
/// @param tokenOut The token being swapped out
/// @param amountIn The desired input amount
/// @param limitSqrtPrice The price limit of the pool that cannot be exceeded by the swap
/// @return amountOut The amount of `tokenOut` that would be received
function quoteExactInputSingle(
address tokenIn,
address tokenOut,
uint256 amountIn,
uint160 limitSqrtPrice
) external returns (uint256 amountOut, uint16 fee);
/// @notice Returns the amount in required for a given exact output swap without executing the swap
/// @param path The path of the swap, i.e. each token pair. Path must be provided in reverse order
/// @param amountOut The amount of the last token to receive
/// @return amountIn The amount of first token required to be paid
function quoteExactOutput(bytes memory path, uint256 amountOut)
external
returns (uint256 amountIn, uint16[] memory fees);
/// @notice Returns the amount in required to receive the given exact output amount but for a swap of a single pool
/// @param tokenIn The token being swapped in
/// @param tokenOut The token being swapped out
/// @param amountOut The desired output amount
/// @param limitSqrtPrice The price limit of the pool that cannot be exceeded by the swap
/// @return amountIn The amount required as the input for the swap in order to receive `amountOut`
function quoteExactOutputSingle(
address tokenIn,
address tokenOut,
uint256 amountOut,
uint160 limitSqrtPrice
) external returns (uint256 amountIn, uint16 fee);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity =0.7.6;
pragma abicoder v2;
import '@cryptoalgebra/core/contracts/libraries/SafeCast.sol';
import '@cryptoalgebra/core/contracts/libraries/TickMath.sol';
import '@cryptoalgebra/core/contracts/libraries/FullMath.sol';
import '@cryptoalgebra/core/contracts/interfaces/IAlgebraPool.sol';
import '@cryptoalgebra/core/contracts/interfaces/callback/IAlgebraSwapCallback.sol';
import '../interfaces/IQuoter.sol';
import '../base/PeripheryImmutableState.sol';
import '../libraries/Path.sol';
import '../libraries/PoolAddress.sol';
import '../libraries/CallbackValidation.sol';
/// @title Provides quotes for swaps
/// @notice Allows getting the expected amount out or amount in for a given swap without executing the swap
/// @dev These functions are not gas efficient and should _not_ be called on chain. Instead, optimistically execute
/// the swap and check the amounts in the callback.
/// Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
contract Quoter is IQuoter, IAlgebraSwapCallback, PeripheryImmutableState {
using Path for bytes;
using SafeCast for uint256;
/// @dev Transient storage variable used to check a safety condition in exact output swaps.
uint256 private amountOutCached;
constructor(
address _factory,
address _WNativeToken,
address _poolDeployer
) PeripheryImmutableState(_factory, _WNativeToken, _poolDeployer) {}
function getPool(address tokenA, address tokenB) private view returns (IAlgebraPool) {
return IAlgebraPool(PoolAddress.computeAddress(poolDeployer, PoolAddress.getPoolKey(tokenA, tokenB)));
}
/// @inheritdoc IAlgebraSwapCallback
function algebraSwapCallback(int256 amount0Delta, int256 amount1Delta, bytes memory path) external view override {
require(amount0Delta > 0 || amount1Delta > 0); // swaps entirely within 0-liquidity regions are not supported
(address tokenIn, address tokenOut) = path.decodeFirstPool();
CallbackValidation.verifyCallback(poolDeployer, tokenIn, tokenOut);
(bool isExactInput, uint256 amountToPay, uint256 amountReceived) = amount0Delta > 0
? (tokenIn < tokenOut, uint256(amount0Delta), uint256(-amount1Delta))
: (tokenOut < tokenIn, uint256(amount1Delta), uint256(-amount0Delta));
IAlgebraPool pool = getPool(tokenIn, tokenOut);
uint16 fee;
(, , uint16 feeZto, uint16 feeOtz, , , , ) = pool.globalState();
fee = tokenIn < tokenOut ? feeZto : feeOtz;
if (isExactInput) {
assembly {
let ptr := mload(0x40)
mstore(ptr, amountReceived)
mstore(add(ptr, 0x20), fee)
revert(ptr, 64)
}
} else {
// if the cache has been populated, ensure that the full output amount has been received
if (amountOutCached != 0) require(amountReceived == amountOutCached);
assembly {
let ptr := mload(0x40)
mstore(ptr, amountToPay)
mstore(add(ptr, 0x20), fee)
revert(ptr, 64)
}
}
}
/// @dev Parses a revert reason that should contain the numeric quote
function parseRevertReason(bytes memory reason) private pure returns (uint256, uint16) {
if (reason.length != 64) {
if (reason.length < 68) revert('Unexpected error');
assembly {
reason := add(reason, 0x04)
}
revert(abi.decode(reason, (string)));
}
return abi.decode(reason, (uint256, uint16));
}
/// @inheritdoc IQuoter
function quoteExactInputSingle(
address tokenIn,
address tokenOut,
uint256 amountIn,
uint160 limitSqrtPrice
) public override returns (uint256 amountOut, uint16 fee) {
bool zeroToOne = tokenIn < tokenOut;
try
getPool(tokenIn, tokenOut).swap(
address(this), // address(0) might cause issues with some tokens
zeroToOne,
amountIn.toInt256(),
limitSqrtPrice == 0
? (zeroToOne ? TickMath.MIN_SQRT_RATIO + 1 : TickMath.MAX_SQRT_RATIO - 1)
: limitSqrtPrice,
abi.encodePacked(tokenIn, tokenOut)
)
{} catch (bytes memory reason) {
(amountOut, fee) = parseRevertReason(reason);
}
}
/// @inheritdoc IQuoter
function quoteExactInput(
bytes memory path,
uint256 amountIn
) external override returns (uint256 amountOut, uint16[] memory fees) {
fees = new uint16[](path.numPools());
uint256 i = 0;
while (true) {
bool hasMultiplePools = path.hasMultiplePools();
(address tokenIn, address tokenOut) = path.decodeFirstPool();
// the outputs of prior swaps become the inputs to subsequent ones
(amountIn, fees[i]) = quoteExactInputSingle(tokenIn, tokenOut, amountIn, 0);
// decide whether to continue or terminate
if (hasMultiplePools) {
path = path.skipToken();
} else {
return (amountIn, fees);
}
i++;
}
}
/// @inheritdoc IQuoter
function quoteExactOutputSingle(
address tokenIn,
address tokenOut,
uint256 amountOut,
uint160 limitSqrtPrice
) public override returns (uint256 amountIn, uint16 fee) {
bool zeroToOne = tokenIn < tokenOut;
// if no price limit has been specified, cache the output amount for comparison in the swap callback
if (limitSqrtPrice == 0) amountOutCached = amountOut;
try
getPool(tokenIn, tokenOut).swap(
address(this), // address(0) might cause issues with some tokens
zeroToOne,
-amountOut.toInt256(),
limitSqrtPrice == 0
? (zeroToOne ? TickMath.MIN_SQRT_RATIO + 1 : TickMath.MAX_SQRT_RATIO - 1)
: limitSqrtPrice,
abi.encodePacked(tokenOut, tokenIn)
)
{} catch (bytes memory reason) {
if (limitSqrtPrice == 0) delete amountOutCached; // clear cache
(amountIn, fee) = parseRevertReason(reason);
}
}
/// @inheritdoc IQuoter
function quoteExactOutput(
bytes memory path,
uint256 amountOut
) external override returns (uint256 amountIn, uint16[] memory fees) {
fees = new uint16[](path.numPools());
uint256 i = 0;
while (true) {
bool hasMultiplePools = path.hasMultiplePools();
(address tokenOut, address tokenIn) = path.decodeFirstPool();
// the inputs of prior swaps become the outputs of subsequent ones
(amountOut, fees[i]) = quoteExactOutputSingle(tokenIn, tokenOut, amountOut, 0);
// decide whether to continue or terminate
if (hasMultiplePools) {
path = path.skipToken();
} else {
return (amountOut, fees);
}
i++;
}
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
/**
* @title Solidity Bytes Arrays Utils
* @author Gonçalo Sá <[email protected]>
*
* @dev Bytes tightly packed arrays utility library for ethereum contracts written in Solidity.
* The library lets you concatenate, slice and type cast bytes arrays both in memory and storage.
*/
pragma solidity >=0.5.0 <0.8.0;
library BytesLib {
function slice(
bytes memory _bytes,
uint256 _start,
uint256 _length
) internal pure returns (bytes memory) {
require(_length + 31 >= _length, 'slice_overflow');
require(_start + _length >= _start, 'slice_overflow');
require(_bytes.length >= _start + _length, 'slice_outOfBounds');
bytes memory tempBytes;
assembly {
switch iszero(_length)
case 0 {
// Get a location of some free memory and store it in tempBytes as
// Solidity does for memory variables.
tempBytes := mload(0x40)
// The first word of the slice result is potentially a partial
// word read from the original array. To read it, we calculate
// the length of that partial word and start copying that many
// bytes into the array. The first word we copy will start with
// data we don't care about, but the last `lengthmod` bytes will
// land at the beginning of the contents of the new array. When
// we're done copying, we overwrite the full first word with
// the actual length of the slice.
let lengthmod := and(_length, 31)
// The multiplication in the next line is necessary
// because when slicing multiples of 32 bytes (lengthmod == 0)
// the following copy loop was copying the origin's length
// and then ending prematurely not copying everything it should.
let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
let end := add(mc, _length)
for {
// The multiplication in the next line has the same exact purpose
// as the one above.
let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
} lt(mc, end) {
mc := add(mc, 0x20)
cc := add(cc, 0x20)
} {
mstore(mc, mload(cc))
}
mstore(tempBytes, _length)
//update free-memory pointer
//allocating the array padded to 32 bytes like the compiler does now
mstore(0x40, and(add(mc, 31), not(31)))
}
//if we want a zero-length slice let's just return a zero-length array
default {
tempBytes := mload(0x40)
//zero out the 32 bytes slice we are about to return
//we need to do it because Solidity does not garbage collect
mstore(tempBytes, 0)
mstore(0x40, add(tempBytes, 0x20))
}
}
return tempBytes;
}
function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
require(_start + 20 >= _start, 'toAddress_overflow');
require(_bytes.length >= _start + 20, 'toAddress_outOfBounds');
address tempAddress;
assembly {
tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
}
return tempAddress;
}
function toUint24(bytes memory _bytes, uint256 _start) internal pure returns (uint24) {
require(_start + 3 >= _start, 'toUint24_overflow');
require(_bytes.length >= _start + 3, 'toUint24_outOfBounds');
uint24 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x3), _start))
}
return tempUint;
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity =0.7.6;
import '@cryptoalgebra/core/contracts/interfaces/IAlgebraPool.sol';
import './PoolAddress.sol';
/// @notice Provides validation for callbacks from Algebra Pools
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
library CallbackValidation {
/// @notice Returns the address of a valid Algebra Pool
/// @param poolDeployer The contract address of the Algebra pool deployer
/// @param tokenA The contract address of either token0 or token1
/// @param tokenB The contract address of the other token
/// @return pool The V3 pool contract address
function verifyCallback(
address poolDeployer,
address tokenA,
address tokenB
) internal view returns (IAlgebraPool pool) {
return verifyCallback(poolDeployer, PoolAddress.getPoolKey(tokenA, tokenB));
}
/// @notice Returns the address of a valid Algebra Pool
/// @param poolDeployer The contract address of the Algebra pool deployer
/// @param poolKey The identifying key of the V3 pool
/// @return pool The V3 pool contract address
function verifyCallback(address poolDeployer, PoolAddress.PoolKey memory poolKey)
internal
view
returns (IAlgebraPool pool)
{
pool = IAlgebraPool(PoolAddress.computeAddress(poolDeployer, poolKey));
require(msg.sender == address(pool));
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.6.0;
import './BytesLib.sol';
/// @title Functions for manipulating path data for multihop swaps
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
library Path {
using BytesLib for bytes;
/// @dev The length of the bytes encoded address
uint256 private constant ADDR_SIZE = 20;
/// @dev The length of the bytes encoded fee
uint256 private constant FEE_SIZE = 3;
/// @dev The offset of a single token address and pool fee
uint256 private constant NEXT_OFFSET = ADDR_SIZE;
/// @dev The offset of an encoded pool key
uint256 private constant POP_OFFSET = NEXT_OFFSET + ADDR_SIZE;
/// @dev The minimum length of an encoding that contains 2 or more pools
uint256 private constant MULTIPLE_POOLS_MIN_LENGTH = POP_OFFSET + NEXT_OFFSET;
/// @notice Returns true iff the path contains two or more pools
/// @param path The encoded swap path
/// @return True if path contains two or more pools, otherwise false
function hasMultiplePools(bytes memory path) internal pure returns (bool) {
return path.length >= MULTIPLE_POOLS_MIN_LENGTH;
}
/// @notice Returns the number of pools in the path
/// @param path The encoded swap path
/// @return The number of pools in the path
function numPools(bytes memory path) internal pure returns (uint256) {
// Ignore the first token address. From then on every fee and token offset indicates a pool.
return ((path.length - ADDR_SIZE) / NEXT_OFFSET);
}
/// @notice Decodes the first pool in path
/// @param path The bytes encoded swap path
/// @return tokenA The first token of the given pool
/// @return tokenB The second token of the given pool
function decodeFirstPool(bytes memory path) internal pure returns (address tokenA, address tokenB) {
tokenA = path.toAddress(0);
tokenB = path.toAddress(NEXT_OFFSET);
}
/// @notice Gets the segment corresponding to the first pool in the path
/// @param path The bytes encoded swap path
/// @return The segment containing all data necessary to target the first pool in the path
function getFirstPool(bytes memory path) internal pure returns (bytes memory) {
return path.slice(0, POP_OFFSET);
}
/// @notice Skips a token + fee element from the buffer and returns the remainder
/// @param path The swap path
/// @return The remaining token + fee elements in the path
function skipToken(bytes memory path) internal pure returns (bytes memory) {
return path.slice(NEXT_OFFSET, path.length - NEXT_OFFSET);
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Provides functions for deriving a pool address from the factory, tokens, and the fee
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
library PoolAddress {
bytes32 internal constant POOL_INIT_CODE_HASH = 0xb785aaed76f65b185ee1fe081ef2233b7473b6c47bc008865f64dac83f4982f4;
/// @notice The identifying key of the pool
struct PoolKey {
address token0;
address token1;
}
/// @notice Returns PoolKey: the ordered tokens with the matched fee levels
/// @param tokenA The first token of a pool, unsorted
/// @param tokenB The second token of a pool, unsorted
/// @return Poolkey The pool details with ordered token0 and token1 assignments
function getPoolKey(address tokenA, address tokenB) internal pure returns (PoolKey memory) {
if (tokenA > tokenB) (tokenA, tokenB) = (tokenB, tokenA);
return PoolKey({token0: tokenA, token1: tokenB});
}
/// @notice Deterministically computes the pool address given the factory and PoolKey
/// @param factory The Algebra factory contract address
/// @param key The PoolKey
/// @return pool The contract address of the V3 pool
function computeAddress(address factory, PoolKey memory key) internal pure returns (address pool) {
require(key.token0 < key.token1);
pool = address(
uint256(
keccak256(
abi.encodePacked(
hex'ff',
factory,
keccak256(abi.encode(key.token0, key.token1)),
POOL_INIT_CODE_HASH
)
)
)
);
}
}