Contract Name:
TimelockController
Contract Source Code:
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (governance/TimelockController.sol)
pragma solidity ^0.8.20;
import {AccessControl} from "../access/AccessControl.sol";
import {ERC721Holder} from "../token/ERC721/utils/ERC721Holder.sol";
import {ERC1155Holder} from "../token/ERC1155/utils/ERC1155Holder.sol";
import {Address} from "../utils/Address.sol";
/**
* @dev Contract module which acts as a timelocked controller. When set as the
* owner of an `Ownable` smart contract, it enforces a timelock on all
* `onlyOwner` maintenance operations. This gives time for users of the
* controlled contract to exit before a potentially dangerous maintenance
* operation is applied.
*
* By default, this contract is self administered, meaning administration tasks
* have to go through the timelock process. The proposer (resp executor) role
* is in charge of proposing (resp executing) operations. A common use case is
* to position this {TimelockController} as the owner of a smart contract, with
* a multisig or a DAO as the sole proposer.
*/
contract TimelockController is AccessControl, ERC721Holder, ERC1155Holder {
bytes32 public constant PROPOSER_ROLE = keccak256("PROPOSER_ROLE");
bytes32 public constant EXECUTOR_ROLE = keccak256("EXECUTOR_ROLE");
bytes32 public constant CANCELLER_ROLE = keccak256("CANCELLER_ROLE");
uint256 internal constant _DONE_TIMESTAMP = uint256(1);
mapping(bytes32 id => uint256) private _timestamps;
uint256 private _minDelay;
enum OperationState {
Unset,
Waiting,
Ready,
Done
}
/**
* @dev Mismatch between the parameters length for an operation call.
*/
error TimelockInvalidOperationLength(uint256 targets, uint256 payloads, uint256 values);
/**
* @dev The schedule operation doesn't meet the minimum delay.
*/
error TimelockInsufficientDelay(uint256 delay, uint256 minDelay);
/**
* @dev The current state of an operation is not as required.
* The `expectedStates` is a bitmap with the bits enabled for each OperationState enum position
* counting from right to left.
*
* See {_encodeStateBitmap}.
*/
error TimelockUnexpectedOperationState(bytes32 operationId, bytes32 expectedStates);
/**
* @dev The predecessor to an operation not yet done.
*/
error TimelockUnexecutedPredecessor(bytes32 predecessorId);
/**
* @dev The caller account is not authorized.
*/
error TimelockUnauthorizedCaller(address caller);
/**
* @dev Emitted when a call is scheduled as part of operation `id`.
*/
event CallScheduled(
bytes32 indexed id,
uint256 indexed index,
address target,
uint256 value,
bytes data,
bytes32 predecessor,
uint256 delay
);
/**
* @dev Emitted when a call is performed as part of operation `id`.
*/
event CallExecuted(bytes32 indexed id, uint256 indexed index, address target, uint256 value, bytes data);
/**
* @dev Emitted when new proposal is scheduled with non-zero salt.
*/
event CallSalt(bytes32 indexed id, bytes32 salt);
/**
* @dev Emitted when operation `id` is cancelled.
*/
event Cancelled(bytes32 indexed id);
/**
* @dev Emitted when the minimum delay for future operations is modified.
*/
event MinDelayChange(uint256 oldDuration, uint256 newDuration);
/**
* @dev Initializes the contract with the following parameters:
*
* - `minDelay`: initial minimum delay in seconds for operations
* - `proposers`: accounts to be granted proposer and canceller roles
* - `executors`: accounts to be granted executor role
* - `admin`: optional account to be granted admin role; disable with zero address
*
* IMPORTANT: The optional admin can aid with initial configuration of roles after deployment
* without being subject to delay, but this role should be subsequently renounced in favor of
* administration through timelocked proposals. Previous versions of this contract would assign
* this admin to the deployer automatically and should be renounced as well.
*/
constructor(uint256 minDelay, address[] memory proposers, address[] memory executors, address admin) {
// self administration
_grantRole(DEFAULT_ADMIN_ROLE, address(this));
// optional admin
if (admin != address(0)) {
_grantRole(DEFAULT_ADMIN_ROLE, admin);
}
// register proposers and cancellers
for (uint256 i = 0; i < proposers.length; ++i) {
_grantRole(PROPOSER_ROLE, proposers[i]);
_grantRole(CANCELLER_ROLE, proposers[i]);
}
// register executors
for (uint256 i = 0; i < executors.length; ++i) {
_grantRole(EXECUTOR_ROLE, executors[i]);
}
_minDelay = minDelay;
emit MinDelayChange(0, minDelay);
}
/**
* @dev Modifier to make a function callable only by a certain role. In
* addition to checking the sender's role, `address(0)` 's role is also
* considered. Granting a role to `address(0)` is equivalent to enabling
* this role for everyone.
*/
modifier onlyRoleOrOpenRole(bytes32 role) {
if (!hasRole(role, address(0))) {
_checkRole(role, _msgSender());
}
_;
}
/**
* @dev Contract might receive/hold ETH as part of the maintenance process.
*/
receive() external payable {}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(
bytes4 interfaceId
) public view virtual override(AccessControl, ERC1155Holder) returns (bool) {
return super.supportsInterface(interfaceId);
}
/**
* @dev Returns whether an id corresponds to a registered operation. This
* includes both Waiting, Ready, and Done operations.
*/
function isOperation(bytes32 id) public view returns (bool) {
return getOperationState(id) != OperationState.Unset;
}
/**
* @dev Returns whether an operation is pending or not. Note that a "pending" operation may also be "ready".
*/
function isOperationPending(bytes32 id) public view returns (bool) {
OperationState state = getOperationState(id);
return state == OperationState.Waiting || state == OperationState.Ready;
}
/**
* @dev Returns whether an operation is ready for execution. Note that a "ready" operation is also "pending".
*/
function isOperationReady(bytes32 id) public view returns (bool) {
return getOperationState(id) == OperationState.Ready;
}
/**
* @dev Returns whether an operation is done or not.
*/
function isOperationDone(bytes32 id) public view returns (bool) {
return getOperationState(id) == OperationState.Done;
}
/**
* @dev Returns the timestamp at which an operation becomes ready (0 for
* unset operations, 1 for done operations).
*/
function getTimestamp(bytes32 id) public view virtual returns (uint256) {
return _timestamps[id];
}
/**
* @dev Returns operation state.
*/
function getOperationState(bytes32 id) public view virtual returns (OperationState) {
uint256 timestamp = getTimestamp(id);
if (timestamp == 0) {
return OperationState.Unset;
} else if (timestamp == _DONE_TIMESTAMP) {
return OperationState.Done;
} else if (timestamp > block.timestamp) {
return OperationState.Waiting;
} else {
return OperationState.Ready;
}
}
/**
* @dev Returns the minimum delay in seconds for an operation to become valid.
*
* This value can be changed by executing an operation that calls `updateDelay`.
*/
function getMinDelay() public view virtual returns (uint256) {
return _minDelay;
}
/**
* @dev Returns the identifier of an operation containing a single
* transaction.
*/
function hashOperation(
address target,
uint256 value,
bytes calldata data,
bytes32 predecessor,
bytes32 salt
) public pure virtual returns (bytes32) {
return keccak256(abi.encode(target, value, data, predecessor, salt));
}
/**
* @dev Returns the identifier of an operation containing a batch of
* transactions.
*/
function hashOperationBatch(
address[] calldata targets,
uint256[] calldata values,
bytes[] calldata payloads,
bytes32 predecessor,
bytes32 salt
) public pure virtual returns (bytes32) {
return keccak256(abi.encode(targets, values, payloads, predecessor, salt));
}
/**
* @dev Schedule an operation containing a single transaction.
*
* Emits {CallSalt} if salt is nonzero, and {CallScheduled}.
*
* Requirements:
*
* - the caller must have the 'proposer' role.
*/
function schedule(
address target,
uint256 value,
bytes calldata data,
bytes32 predecessor,
bytes32 salt,
uint256 delay
) public virtual onlyRole(PROPOSER_ROLE) {
bytes32 id = hashOperation(target, value, data, predecessor, salt);
_schedule(id, delay);
emit CallScheduled(id, 0, target, value, data, predecessor, delay);
if (salt != bytes32(0)) {
emit CallSalt(id, salt);
}
}
/**
* @dev Schedule an operation containing a batch of transactions.
*
* Emits {CallSalt} if salt is nonzero, and one {CallScheduled} event per transaction in the batch.
*
* Requirements:
*
* - the caller must have the 'proposer' role.
*/
function scheduleBatch(
address[] calldata targets,
uint256[] calldata values,
bytes[] calldata payloads,
bytes32 predecessor,
bytes32 salt,
uint256 delay
) public virtual onlyRole(PROPOSER_ROLE) {
if (targets.length != values.length || targets.length != payloads.length) {
revert TimelockInvalidOperationLength(targets.length, payloads.length, values.length);
}
bytes32 id = hashOperationBatch(targets, values, payloads, predecessor, salt);
_schedule(id, delay);
for (uint256 i = 0; i < targets.length; ++i) {
emit CallScheduled(id, i, targets[i], values[i], payloads[i], predecessor, delay);
}
if (salt != bytes32(0)) {
emit CallSalt(id, salt);
}
}
/**
* @dev Schedule an operation that is to become valid after a given delay.
*/
function _schedule(bytes32 id, uint256 delay) private {
if (isOperation(id)) {
revert TimelockUnexpectedOperationState(id, _encodeStateBitmap(OperationState.Unset));
}
uint256 minDelay = getMinDelay();
if (delay < minDelay) {
revert TimelockInsufficientDelay(delay, minDelay);
}
_timestamps[id] = block.timestamp + delay;
}
/**
* @dev Cancel an operation.
*
* Requirements:
*
* - the caller must have the 'canceller' role.
*/
function cancel(bytes32 id) public virtual onlyRole(CANCELLER_ROLE) {
if (!isOperationPending(id)) {
revert TimelockUnexpectedOperationState(
id,
_encodeStateBitmap(OperationState.Waiting) | _encodeStateBitmap(OperationState.Ready)
);
}
delete _timestamps[id];
emit Cancelled(id);
}
/**
* @dev Execute an (ready) operation containing a single transaction.
*
* Emits a {CallExecuted} event.
*
* Requirements:
*
* - the caller must have the 'executor' role.
*/
// This function can reenter, but it doesn't pose a risk because _afterCall checks that the proposal is pending,
// thus any modifications to the operation during reentrancy should be caught.
// slither-disable-next-line reentrancy-eth
function execute(
address target,
uint256 value,
bytes calldata payload,
bytes32 predecessor,
bytes32 salt
) public payable virtual onlyRoleOrOpenRole(EXECUTOR_ROLE) {
bytes32 id = hashOperation(target, value, payload, predecessor, salt);
_beforeCall(id, predecessor);
_execute(target, value, payload);
emit CallExecuted(id, 0, target, value, payload);
_afterCall(id);
}
/**
* @dev Execute an (ready) operation containing a batch of transactions.
*
* Emits one {CallExecuted} event per transaction in the batch.
*
* Requirements:
*
* - the caller must have the 'executor' role.
*/
// This function can reenter, but it doesn't pose a risk because _afterCall checks that the proposal is pending,
// thus any modifications to the operation during reentrancy should be caught.
// slither-disable-next-line reentrancy-eth
function executeBatch(
address[] calldata targets,
uint256[] calldata values,
bytes[] calldata payloads,
bytes32 predecessor,
bytes32 salt
) public payable virtual onlyRoleOrOpenRole(EXECUTOR_ROLE) {
if (targets.length != values.length || targets.length != payloads.length) {
revert TimelockInvalidOperationLength(targets.length, payloads.length, values.length);
}
bytes32 id = hashOperationBatch(targets, values, payloads, predecessor, salt);
_beforeCall(id, predecessor);
for (uint256 i = 0; i < targets.length; ++i) {
address target = targets[i];
uint256 value = values[i];
bytes calldata payload = payloads[i];
_execute(target, value, payload);
emit CallExecuted(id, i, target, value, payload);
}
_afterCall(id);
}
/**
* @dev Execute an operation's call.
*/
function _execute(address target, uint256 value, bytes calldata data) internal virtual {
(bool success, bytes memory returndata) = target.call{value: value}(data);
Address.verifyCallResult(success, returndata);
}
/**
* @dev Checks before execution of an operation's calls.
*/
function _beforeCall(bytes32 id, bytes32 predecessor) private view {
if (!isOperationReady(id)) {
revert TimelockUnexpectedOperationState(id, _encodeStateBitmap(OperationState.Ready));
}
if (predecessor != bytes32(0) && !isOperationDone(predecessor)) {
revert TimelockUnexecutedPredecessor(predecessor);
}
}
/**
* @dev Checks after execution of an operation's calls.
*/
function _afterCall(bytes32 id) private {
if (!isOperationReady(id)) {
revert TimelockUnexpectedOperationState(id, _encodeStateBitmap(OperationState.Ready));
}
_timestamps[id] = _DONE_TIMESTAMP;
}
/**
* @dev Changes the minimum timelock duration for future operations.
*
* Emits a {MinDelayChange} event.
*
* Requirements:
*
* - the caller must be the timelock itself. This can only be achieved by scheduling and later executing
* an operation where the timelock is the target and the data is the ABI-encoded call to this function.
*/
function updateDelay(uint256 newDelay) external virtual {
address sender = _msgSender();
if (sender != address(this)) {
revert TimelockUnauthorizedCaller(sender);
}
emit MinDelayChange(_minDelay, newDelay);
_minDelay = newDelay;
}
/**
* @dev Encodes a `OperationState` into a `bytes32` representation where each bit enabled corresponds to
* the underlying position in the `OperationState` enum. For example:
*
* 0x000...1000
* ^^^^^^----- ...
* ^---- Done
* ^--- Ready
* ^-- Waiting
* ^- Unset
*/
function _encodeStateBitmap(OperationState operationState) internal pure returns (bytes32) {
return bytes32(1 << uint8(operationState));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/AccessControl.sol)
pragma solidity ^0.8.20;
import {IAccessControl} from "./IAccessControl.sol";
import {Context} from "../utils/Context.sol";
import {ERC165} from "../utils/introspection/ERC165.sol";
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```solidity
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```solidity
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it. We recommend using {AccessControlDefaultAdminRules}
* to enforce additional security measures for this role.
*/
abstract contract AccessControl is Context, IAccessControl, ERC165 {
struct RoleData {
mapping(address account => bool) hasRole;
bytes32 adminRole;
}
mapping(bytes32 role => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Modifier that checks that an account has a specific role. Reverts
* with an {AccessControlUnauthorizedAccount} error including the required role.
*/
modifier onlyRole(bytes32 role) {
_checkRole(role);
_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view virtual returns (bool) {
return _roles[role].hasRole[account];
}
/**
* @dev Reverts with an {AccessControlUnauthorizedAccount} error if `_msgSender()`
* is missing `role`. Overriding this function changes the behavior of the {onlyRole} modifier.
*/
function _checkRole(bytes32 role) internal view virtual {
_checkRole(role, _msgSender());
}
/**
* @dev Reverts with an {AccessControlUnauthorizedAccount} error if `account`
* is missing `role`.
*/
function _checkRole(bytes32 role, address account) internal view virtual {
if (!hasRole(role, account)) {
revert AccessControlUnauthorizedAccount(account, role);
}
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view virtual returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*
* May emit a {RoleGranted} event.
*/
function grantRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*
* May emit a {RoleRevoked} event.
*/
function revokeRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been revoked `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `callerConfirmation`.
*
* May emit a {RoleRevoked} event.
*/
function renounceRole(bytes32 role, address callerConfirmation) public virtual {
if (callerConfirmation != _msgSender()) {
revert AccessControlBadConfirmation();
}
_revokeRole(role, callerConfirmation);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
bytes32 previousAdminRole = getRoleAdmin(role);
_roles[role].adminRole = adminRole;
emit RoleAdminChanged(role, previousAdminRole, adminRole);
}
/**
* @dev Attempts to grant `role` to `account` and returns a boolean indicating if `role` was granted.
*
* Internal function without access restriction.
*
* May emit a {RoleGranted} event.
*/
function _grantRole(bytes32 role, address account) internal virtual returns (bool) {
if (!hasRole(role, account)) {
_roles[role].hasRole[account] = true;
emit RoleGranted(role, account, _msgSender());
return true;
} else {
return false;
}
}
/**
* @dev Attempts to revoke `role` to `account` and returns a boolean indicating if `role` was revoked.
*
* Internal function without access restriction.
*
* May emit a {RoleRevoked} event.
*/
function _revokeRole(bytes32 role, address account) internal virtual returns (bool) {
if (hasRole(role, account)) {
_roles[role].hasRole[account] = false;
emit RoleRevoked(role, account, _msgSender());
return true;
} else {
return false;
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/utils/ERC721Holder.sol)
pragma solidity ^0.8.20;
import {IERC721Receiver} from "../IERC721Receiver.sol";
/**
* @dev Implementation of the {IERC721Receiver} interface.
*
* Accepts all token transfers.
* Make sure the contract is able to use its token with {IERC721-safeTransferFrom}, {IERC721-approve} or
* {IERC721-setApprovalForAll}.
*/
abstract contract ERC721Holder is IERC721Receiver {
/**
* @dev See {IERC721Receiver-onERC721Received}.
*
* Always returns `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(address, address, uint256, bytes memory) public virtual returns (bytes4) {
return this.onERC721Received.selector;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC1155/utils/ERC1155Holder.sol)
pragma solidity ^0.8.20;
import {IERC165, ERC165} from "../../../utils/introspection/ERC165.sol";
import {IERC1155Receiver} from "../IERC1155Receiver.sol";
/**
* @dev Simple implementation of `IERC1155Receiver` that will allow a contract to hold ERC-1155 tokens.
*
* IMPORTANT: When inheriting this contract, you must include a way to use the received tokens, otherwise they will be
* stuck.
*/
abstract contract ERC1155Holder is ERC165, IERC1155Receiver {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IERC1155Receiver).interfaceId || super.supportsInterface(interfaceId);
}
function onERC1155Received(
address,
address,
uint256,
uint256,
bytes memory
) public virtual override returns (bytes4) {
return this.onERC1155Received.selector;
}
function onERC1155BatchReceived(
address,
address,
uint256[] memory,
uint256[] memory,
bytes memory
) public virtual override returns (bytes4) {
return this.onERC1155BatchReceived.selector;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/Address.sol)
pragma solidity ^0.8.20;
import {Errors} from "./Errors.sol";
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev There's no code at `target` (it is not a contract).
*/
error AddressEmptyCode(address target);
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
if (address(this).balance < amount) {
revert Errors.InsufficientBalance(address(this).balance, amount);
}
(bool success, ) = recipient.call{value: amount}("");
if (!success) {
revert Errors.FailedCall();
}
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason or custom error, it is bubbled
* up by this function (like regular Solidity function calls). However, if
* the call reverted with no returned reason, this function reverts with a
* {Errors.FailedCall} error.
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
if (address(this).balance < value) {
revert Errors.InsufficientBalance(address(this).balance, value);
}
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
* was not a contract or bubbling up the revert reason (falling back to {Errors.FailedCall}) in case
* of an unsuccessful call.
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata
) internal view returns (bytes memory) {
if (!success) {
_revert(returndata);
} else {
// only check if target is a contract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
if (returndata.length == 0 && target.code.length == 0) {
revert AddressEmptyCode(target);
}
return returndata;
}
}
/**
* @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
* revert reason or with a default {Errors.FailedCall} error.
*/
function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
if (!success) {
_revert(returndata);
} else {
return returndata;
}
}
/**
* @dev Reverts with returndata if present. Otherwise reverts with {Errors.FailedCall}.
*/
function _revert(bytes memory returndata) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly ("memory-safe") {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert Errors.FailedCall();
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (access/IAccessControl.sol)
pragma solidity ^0.8.20;
/**
* @dev External interface of AccessControl declared to support ERC-165 detection.
*/
interface IAccessControl {
/**
* @dev The `account` is missing a role.
*/
error AccessControlUnauthorizedAccount(address account, bytes32 neededRole);
/**
* @dev The caller of a function is not the expected one.
*
* NOTE: Don't confuse with {AccessControlUnauthorizedAccount}.
*/
error AccessControlBadConfirmation();
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call. This account bears the admin role (for the granted role).
* Expected in cases where the role was granted using the internal {AccessControl-_grantRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) external view returns (bool);
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {AccessControl-_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) external view returns (bytes32);
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `callerConfirmation`.
*/
function renounceRole(bytes32 role, address callerConfirmation) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)
pragma solidity ^0.8.20;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
function _contextSuffixLength() internal view virtual returns (uint256) {
return 0;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/introspection/ERC165.sol)
pragma solidity ^0.8.20;
import {IERC165} from "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC-165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.20;
/**
* @title ERC-721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC-721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be
* reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC1155/IERC1155Receiver.sol)
pragma solidity ^0.8.20;
import {IERC165} from "../../utils/introspection/IERC165.sol";
/**
* @dev Interface that must be implemented by smart contracts in order to receive
* ERC-1155 token transfers.
*/
interface IERC1155Receiver is IERC165 {
/**
* @dev Handles the receipt of a single ERC-1155 token type. This function is
* called at the end of a `safeTransferFrom` after the balance has been updated.
*
* NOTE: To accept the transfer, this must return
* `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
* (i.e. 0xf23a6e61, or its own function selector).
*
* @param operator The address which initiated the transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param id The ID of the token being transferred
* @param value The amount of tokens being transferred
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
) external returns (bytes4);
/**
* @dev Handles the receipt of a multiple ERC-1155 token types. This function
* is called at the end of a `safeBatchTransferFrom` after the balances have
* been updated.
*
* NOTE: To accept the transfer(s), this must return
* `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
* (i.e. 0xbc197c81, or its own function selector).
*
* @param operator The address which initiated the batch transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param ids An array containing ids of each token being transferred (order and length must match values array)
* @param values An array containing amounts of each token being transferred (order and length must match ids array)
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/Errors.sol)
pragma solidity ^0.8.20;
/**
* @dev Collection of common custom errors used in multiple contracts
*
* IMPORTANT: Backwards compatibility is not guaranteed in future versions of the library.
* It is recommended to avoid relying on the error API for critical functionality.
*
* _Available since v5.1._
*/
library Errors {
/**
* @dev The ETH balance of the account is not enough to perform the operation.
*/
error InsufficientBalance(uint256 balance, uint256 needed);
/**
* @dev A call to an address target failed. The target may have reverted.
*/
error FailedCall();
/**
* @dev The deployment failed.
*/
error FailedDeployment();
/**
* @dev A necessary precompile is missing.
*/
error MissingPrecompile(address);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/introspection/IERC165.sol)
pragma solidity ^0.8.20;
/**
* @dev Interface of the ERC-165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[ERC].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[ERC section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}