Contract Name:
Blacksail_SwapX_AURUM_Strategy
Contract Source Code:
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)
pragma solidity ^0.8.20;
import {Context} from "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* The initial owner is set to the address provided by the deployer. This can
* later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
/**
* @dev The caller account is not authorized to perform an operation.
*/
error OwnableUnauthorizedAccount(address account);
/**
* @dev The owner is not a valid owner account. (eg. `address(0)`)
*/
error OwnableInvalidOwner(address owner);
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the address provided by the deployer as the initial owner.
*/
constructor(address initialOwner) {
if (initialOwner == address(0)) {
revert OwnableInvalidOwner(address(0));
}
_transferOwnership(initialOwner);
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
if (owner() != _msgSender()) {
revert OwnableUnauthorizedAccount(_msgSender());
}
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby disabling any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
if (newOwner == address(0)) {
revert OwnableInvalidOwner(address(0));
}
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (interfaces/IERC1363.sol)
pragma solidity ^0.8.20;
import {IERC20} from "./IERC20.sol";
import {IERC165} from "./IERC165.sol";
/**
* @title IERC1363
* @dev Interface of the ERC-1363 standard as defined in the https://eips.ethereum.org/EIPS/eip-1363[ERC-1363].
*
* Defines an extension interface for ERC-20 tokens that supports executing code on a recipient contract
* after `transfer` or `transferFrom`, or code on a spender contract after `approve`, in a single transaction.
*/
interface IERC1363 is IERC20, IERC165 {
/*
* Note: the ERC-165 identifier for this interface is 0xb0202a11.
* 0xb0202a11 ===
* bytes4(keccak256('transferAndCall(address,uint256)')) ^
* bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^
* bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^
* bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)')) ^
* bytes4(keccak256('approveAndCall(address,uint256)')) ^
* bytes4(keccak256('approveAndCall(address,uint256,bytes)'))
*/
/**
* @dev Moves a `value` amount of tokens from the caller's account to `to`
* and then calls {IERC1363Receiver-onTransferReceived} on `to`.
* @param to The address which you want to transfer to.
* @param value The amount of tokens to be transferred.
* @return A boolean value indicating whether the operation succeeded unless throwing.
*/
function transferAndCall(address to, uint256 value) external returns (bool);
/**
* @dev Moves a `value` amount of tokens from the caller's account to `to`
* and then calls {IERC1363Receiver-onTransferReceived} on `to`.
* @param to The address which you want to transfer to.
* @param value The amount of tokens to be transferred.
* @param data Additional data with no specified format, sent in call to `to`.
* @return A boolean value indicating whether the operation succeeded unless throwing.
*/
function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool);
/**
* @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
* and then calls {IERC1363Receiver-onTransferReceived} on `to`.
* @param from The address which you want to send tokens from.
* @param to The address which you want to transfer to.
* @param value The amount of tokens to be transferred.
* @return A boolean value indicating whether the operation succeeded unless throwing.
*/
function transferFromAndCall(address from, address to, uint256 value) external returns (bool);
/**
* @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
* and then calls {IERC1363Receiver-onTransferReceived} on `to`.
* @param from The address which you want to send tokens from.
* @param to The address which you want to transfer to.
* @param value The amount of tokens to be transferred.
* @param data Additional data with no specified format, sent in call to `to`.
* @return A boolean value indicating whether the operation succeeded unless throwing.
*/
function transferFromAndCall(address from, address to, uint256 value, bytes calldata data) external returns (bool);
/**
* @dev Sets a `value` amount of tokens as the allowance of `spender` over the
* caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
* @param spender The address which will spend the funds.
* @param value The amount of tokens to be spent.
* @return A boolean value indicating whether the operation succeeded unless throwing.
*/
function approveAndCall(address spender, uint256 value) external returns (bool);
/**
* @dev Sets a `value` amount of tokens as the allowance of `spender` over the
* caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
* @param spender The address which will spend the funds.
* @param value The amount of tokens to be spent.
* @param data Additional data with no specified format, sent in call to `spender`.
* @return A boolean value indicating whether the operation succeeded unless throwing.
*/
function approveAndCall(address spender, uint256 value, bytes calldata data) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC165.sol)
pragma solidity ^0.8.20;
import {IERC165} from "../utils/introspection/IERC165.sol";
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC20.sol)
pragma solidity ^0.8.20;
import {IERC20} from "../token/ERC20/IERC20.sol";
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.20;
/**
* @dev Interface of the ERC-20 standard as defined in the ERC.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the value of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the value of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves a `value` amount of tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 value) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets a `value` amount of tokens as the allowance of `spender` over the
* caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 value) external returns (bool);
/**
* @dev Moves a `value` amount of tokens from `from` to `to` using the
* allowance mechanism. `value` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 value) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.20;
import {IERC20} from "../IERC20.sol";
import {IERC1363} from "../../../interfaces/IERC1363.sol";
import {Address} from "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC-20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
/**
* @dev An operation with an ERC-20 token failed.
*/
error SafeERC20FailedOperation(address token);
/**
* @dev Indicates a failed `decreaseAllowance` request.
*/
error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);
/**
* @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
}
/**
* @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
* calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
*/
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
}
/**
* @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*
* IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
* smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
* this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
* that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
*/
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 oldAllowance = token.allowance(address(this), spender);
forceApprove(token, spender, oldAllowance + value);
}
/**
* @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
* value, non-reverting calls are assumed to be successful.
*
* IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
* smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
* this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
* that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
*/
function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
unchecked {
uint256 currentAllowance = token.allowance(address(this), spender);
if (currentAllowance < requestedDecrease) {
revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
}
forceApprove(token, spender, currentAllowance - requestedDecrease);
}
}
/**
* @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
* to be set to zero before setting it to a non-zero value, such as USDT.
*
* NOTE: If the token implements ERC-7674, this function will not modify any temporary allowance. This function
* only sets the "standard" allowance. Any temporary allowance will remain active, in addition to the value being
* set here.
*/
function forceApprove(IERC20 token, address spender, uint256 value) internal {
bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));
if (!_callOptionalReturnBool(token, approvalCall)) {
_callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
_callOptionalReturn(token, approvalCall);
}
}
/**
* @dev Performs an {ERC1363} transferAndCall, with a fallback to the simple {ERC20} transfer if the target has no
* code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
* targeting contracts.
*
* Reverts if the returned value is other than `true`.
*/
function transferAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
if (to.code.length == 0) {
safeTransfer(token, to, value);
} else if (!token.transferAndCall(to, value, data)) {
revert SafeERC20FailedOperation(address(token));
}
}
/**
* @dev Performs an {ERC1363} transferFromAndCall, with a fallback to the simple {ERC20} transferFrom if the target
* has no code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
* targeting contracts.
*
* Reverts if the returned value is other than `true`.
*/
function transferFromAndCallRelaxed(
IERC1363 token,
address from,
address to,
uint256 value,
bytes memory data
) internal {
if (to.code.length == 0) {
safeTransferFrom(token, from, to, value);
} else if (!token.transferFromAndCall(from, to, value, data)) {
revert SafeERC20FailedOperation(address(token));
}
}
/**
* @dev Performs an {ERC1363} approveAndCall, with a fallback to the simple {ERC20} approve if the target has no
* code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
* targeting contracts.
*
* NOTE: When the recipient address (`to`) has no code (i.e. is an EOA), this function behaves as {forceApprove}.
* Opposedly, when the recipient address (`to`) has code, this function only attempts to call {ERC1363-approveAndCall}
* once without retrying, and relies on the returned value to be true.
*
* Reverts if the returned value is other than `true`.
*/
function approveAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
if (to.code.length == 0) {
forceApprove(token, to, value);
} else if (!token.approveAndCall(to, value, data)) {
revert SafeERC20FailedOperation(address(token));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*
* This is a variant of {_callOptionalReturnBool} that reverts if call fails to meet the requirements.
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
uint256 returnSize;
uint256 returnValue;
assembly ("memory-safe") {
let success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
// bubble errors
if iszero(success) {
let ptr := mload(0x40)
returndatacopy(ptr, 0, returndatasize())
revert(ptr, returndatasize())
}
returnSize := returndatasize()
returnValue := mload(0)
}
if (returnSize == 0 ? address(token).code.length == 0 : returnValue != 1) {
revert SafeERC20FailedOperation(address(token));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*
* This is a variant of {_callOptionalReturn} that silently catches all reverts and returns a bool instead.
*/
function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
bool success;
uint256 returnSize;
uint256 returnValue;
assembly ("memory-safe") {
success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
returnSize := returndatasize()
returnValue := mload(0)
}
return success && (returnSize == 0 ? address(token).code.length > 0 : returnValue == 1);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/Address.sol)
pragma solidity ^0.8.20;
import {Errors} from "./Errors.sol";
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev There's no code at `target` (it is not a contract).
*/
error AddressEmptyCode(address target);
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
if (address(this).balance < amount) {
revert Errors.InsufficientBalance(address(this).balance, amount);
}
(bool success, ) = recipient.call{value: amount}("");
if (!success) {
revert Errors.FailedCall();
}
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason or custom error, it is bubbled
* up by this function (like regular Solidity function calls). However, if
* the call reverted with no returned reason, this function reverts with a
* {Errors.FailedCall} error.
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
if (address(this).balance < value) {
revert Errors.InsufficientBalance(address(this).balance, value);
}
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
* was not a contract or bubbling up the revert reason (falling back to {Errors.FailedCall}) in case
* of an unsuccessful call.
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata
) internal view returns (bytes memory) {
if (!success) {
_revert(returndata);
} else {
// only check if target is a contract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
if (returndata.length == 0 && target.code.length == 0) {
revert AddressEmptyCode(target);
}
return returndata;
}
}
/**
* @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
* revert reason or with a default {Errors.FailedCall} error.
*/
function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
if (!success) {
_revert(returndata);
} else {
return returndata;
}
}
/**
* @dev Reverts with returndata if present. Otherwise reverts with {Errors.FailedCall}.
*/
function _revert(bytes memory returndata) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly ("memory-safe") {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert Errors.FailedCall();
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)
pragma solidity ^0.8.20;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
function _contextSuffixLength() internal view virtual returns (uint256) {
return 0;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/Errors.sol)
pragma solidity ^0.8.20;
/**
* @dev Collection of common custom errors used in multiple contracts
*
* IMPORTANT: Backwards compatibility is not guaranteed in future versions of the library.
* It is recommended to avoid relying on the error API for critical functionality.
*
* _Available since v5.1._
*/
library Errors {
/**
* @dev The ETH balance of the account is not enough to perform the operation.
*/
error InsufficientBalance(uint256 balance, uint256 needed);
/**
* @dev A call to an address target failed. The target may have reverted.
*/
error FailedCall();
/**
* @dev The deployment failed.
*/
error FailedDeployment();
/**
* @dev A necessary precompile is missing.
*/
error MissingPrecompile(address);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/introspection/IERC165.sol)
pragma solidity ^0.8.20;
/**
* @dev Interface of the ERC-165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[ERC].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[ERC section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Pausable.sol)
pragma solidity ^0.8.20;
import {Context} from "../utils/Context.sol";
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Pausable is Context {
bool private _paused;
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
/**
* @dev The operation failed because the contract is paused.
*/
error EnforcedPause();
/**
* @dev The operation failed because the contract is not paused.
*/
error ExpectedPause();
/**
* @dev Initializes the contract in unpaused state.
*/
constructor() {
_paused = false;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
_requireNotPaused();
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
_requirePaused();
_;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Throws if the contract is paused.
*/
function _requireNotPaused() internal view virtual {
if (paused()) {
revert EnforcedPause();
}
}
/**
* @dev Throws if the contract is not paused.
*/
function _requirePaused() internal view virtual {
if (!paused()) {
revert ExpectedPause();
}
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/ReentrancyGuard.sol)
pragma solidity ^0.8.20;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If EIP-1153 (transient storage) is available on the chain you're deploying at,
* consider using {ReentrancyGuardTransient} instead.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant NOT_ENTERED = 1;
uint256 private constant ENTERED = 2;
uint256 private _status;
/**
* @dev Unauthorized reentrant call.
*/
error ReentrancyGuardReentrantCall();
constructor() {
_status = NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
_nonReentrantBefore();
_;
_nonReentrantAfter();
}
function _nonReentrantBefore() private {
// On the first call to nonReentrant, _status will be NOT_ENTERED
if (_status == ENTERED) {
revert ReentrancyGuardReentrantCall();
}
// Any calls to nonReentrant after this point will fail
_status = ENTERED;
}
function _nonReentrantAfter() private {
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = NOT_ENTERED;
}
/**
* @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
* `nonReentrant` function in the call stack.
*/
function _reentrancyGuardEntered() internal view returns (bool) {
return _status == ENTERED;
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.20;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/Pausable.sol";
import "../interfacing/swapX/IPair.sol";
import "../interfacing/ISwapX.sol";
import "../interfacing/ISwapXGauge.sol";
import "../interfacing/swapX/IRouterV2.sol";
import "../interfacing/swapX/IV2SwapRouter.sol";
import "../interfacing/Aurum/IPool.sol";
contract Blacksail_SwapX_AURUM_Strategy is Ownable, Pausable, ReentrancyGuard {
using SafeERC20 for IERC20;
// Tokens
address public constant native_token = address(0x039e2fB66102314Ce7b64Ce5Ce3E5183bc94aD38);
address public constant usdc = address(0x29219dd400f2Bf60E5a23d13Be72B486D4038894);
address public lp0;
address public lp1;
address public reward_token;
address public staking_token;
// Fee structure
uint256 public WITHDRAWAL_MAX = 100000;
uint256 public WITHDRAW_FEE = 100;
uint256 public DIVISOR = 1000;
uint256 public CALL_FEE = 100;
uint256 public FEE_BATCH = 900;
uint256 public PLATFORM_FEE = 45;
// Third Party Addresses
address public constant AURUM = address(0x69f196a108002FD75d4B0a1118Ee04C065a63dE9);
address public rewardPool;
address public unirouter;
address public lpRouter;
// Information
uint256 public lastHarvest;
bool public harvestOnDeposit;
uint16 public refCode;
// Platform Addresses
address public vault;
address public treasury;
// Routes
address[] public rewards;
uint256 public slippageTolerance;
event Deposit(uint256 amount);
event Withdraw(uint256 amount);
event Harvest(address indexed harvester);
event ChargeFees(uint256 callFee, uint256 protocolFee);
event SetVault(address indexed newVault);
event SetWithdrawalFee(uint256 newFee);
event SetSlippageTolerance(uint256 newTolerance);
/**
*
* This constructor:
* - Sets up the core token and contract addresses for staking, rewards, and routing.
* - Enables or disables harvest-on-deposit, with a default withdrawal fee of 0 if enabled.
* - Defines the reward-to-native token conversion path for liquidity and fee operations.
* - Grants initial token allowances to external contracts. */
constructor(
address _staking_token,
address _rewardPool,
address _reward_token,
address _unirouter,
address _lpRouter,
bool _harvestOnDeposit,
address _treasury
) Ownable(msg.sender) {
staking_token = _staking_token;
rewardPool = _rewardPool;
unirouter = _unirouter;
lpRouter = _lpRouter;
treasury = _treasury;
lp0 = IPair(staking_token).token0(); // AURUM
lp1 = IPair(staking_token).token1(); // auUSDC
harvestOnDeposit = _harvestOnDeposit;
if (harvestOnDeposit) {
setWithdrawalFee(0);
}
reward_token = _reward_token;
rewards.push(reward_token);
_giveAllowances();
}
/** @dev Sets the vault connected to this strategy */
function setVault(address _vault) external onlyOwner {
require(isContract(_vault), "Vault must be a contract");
vault = _vault;
emit SetVault(_vault);
}
/** @dev Function to synchronize balances before new user deposit. Can be overridden in the strategy. */
function beforeDeposit() external virtual {
if (harvestOnDeposit) {
require(msg.sender == vault, "Vault deposit only");
_harvest(address(this));
}
}
/** @dev Deposits funds into third party farm */
function deposit() public onlyAuthorized whenNotPaused {
_deposit();
}
function _deposit() internal {
uint256 staking_balance = IERC20(staking_token).balanceOf(
address(this)
);
if (staking_balance > 0) {
ISwapXGauge(rewardPool).deposit(staking_balance);
}
}
/**
* @dev Withdraws a specified amount of staking tokens to the vault.
* Handles balance retrieval from the reward pool if needed and deducts withdrawal fees if applicable.
*
* @param _amount The amount of staking tokens to withdraw.
*
* Requirements:
* - Can only be called by the vault.
* - If not the owner and contract is not paused, a withdrawal fee is deducted unless `harvestOnDeposit` is enabled.
*
* Emits a {Withdraw} event with the updated strategy balance. */
function withdraw(uint256 _amount) external nonReentrant {
require(msg.sender == vault, "!vault");
uint256 stakingBal = IERC20(staking_token).balanceOf(address(this));
if (stakingBal < _amount) {
ISwapXGauge(rewardPool).withdraw(_amount - stakingBal);
stakingBal = IERC20(staking_token).balanceOf(address(this));
}
if (stakingBal > _amount) {
stakingBal = _amount;
}
uint256 wFee = (stakingBal * WITHDRAW_FEE) / WITHDRAWAL_MAX;
if (!paused() && !harvestOnDeposit) {
stakingBal = stakingBal - wFee;
}
IERC20(staking_token).safeTransfer(vault, stakingBal);
emit Withdraw(balanceOf());
}
/**
* @dev Triggers the harvest process to compound earnings.
* Internally calls `_harvest` to collect rewards, charge fees, add liquidity, and reinvest. */
function harvest() external {
require(
!isContract(msg.sender) || msg.sender == vault,
"!auth Contract Harvest"
);
_harvest(msg.sender);
}
/** @dev Compounds the strategy's earnings and charges fees */
function _harvest(address caller) internal whenNotPaused {
ISwapXGauge(rewardPool).getReward();
uint256 rewardAmt = IERC20(reward_token).balanceOf(address(this));
if (rewardAmt > 0) {
chargeFees(caller);
lend();
rebalance();
addLiquidity();
_deposit();
}
lastHarvest = block.timestamp;
emit Harvest(msg.sender);
}
/** @dev This function converts all funds to WFTM, charges fees, and sends fees to respective accounts */
function chargeFees(address caller) internal {
uint256 toNative = IERC20(reward_token).balanceOf(address(this));
ISwapX.ExactInputSingleParams memory eisp;
eisp.tokenIn = reward_token;
eisp.tokenOut = native_token;
eisp.recipient = address(this);
eisp.amountIn = toNative;
eisp.limitSqrtPrice = 0;
ISwapX(unirouter).exactInputSingleSupportingFeeOnTransferTokens(eisp);
uint256 nativeBal = IERC20(native_token).balanceOf(address(this));
uint256 platformFee = (nativeBal * PLATFORM_FEE) / DIVISOR;
uint256 callFeeAmount = (platformFee * CALL_FEE) / DIVISOR;
uint256 treasuryFee = platformFee - callFeeAmount;
if (caller != address(this)) {
IERC20(native_token).safeTransfer(caller, callFeeAmount);
}
IERC20(native_token).safeTransfer(treasury, treasuryFee);
emit ChargeFees(callFeeAmount, platformFee);
}
function rebalance() internal {
uint256 aurBal = IERC20(lp0).balanceOf(address(this));
IV2SwapRouter.Route[] memory route = new IV2SwapRouter.Route[](1);
if (aurBal > 0) {
route[0].from = lp0;
route[0].to = lp1;
route[0].stable = false;
try IV2SwapRouter(unirouter).swapExactTokensForTokens(aurBal, 1, route, address(this)) {
} catch {
// do nothing, just incase of failure due to dust amounts
}
}
}
function lend() internal {
uint256 nativeBal = IERC20(native_token).balanceOf(address(this));
ISwapX.ExactInputSingleParams memory eisp;
eisp.tokenIn = native_token;
eisp.tokenOut = usdc;
eisp.recipient = address(this);
eisp.amountIn = nativeBal;
eisp.limitSqrtPrice = 0;
if (nativeBal > 0) {
ISwapX(unirouter).exactInputSingleSupportingFeeOnTransferTokens(eisp);
}
uint256 usdcBal = IERC20(usdc).balanceOf(address(this));
if (usdcBal > 0) {
IPool(AURUM).supply(usdc, usdcBal, address(this), refCode);
}
}
/**
* @dev Adds liquidity by converting native tokens to the deposit token and forwarding them to the ICHI Vault.
*
* - Checks for sufficient native token balance.
* - Converts native tokens to the deposit token using the Uniswap V3 router if required.
* - Approves the necessary allowances for the Uniswap V3 router.
* - Forwards the converted deposit tokens to the ICHI Vault for staking.
*
* Requirements:
* - The contract must have a positive balance of the native token. */
function addLiquidity() internal {
uint256 half_auUSDC_bal = IERC20(lp1).balanceOf(address(this)) / 2;
IV2SwapRouter.Route[] memory route = new IV2SwapRouter.Route[](1);
if (half_auUSDC_bal > 0 ) {
route[0].from = lp1;
route[0].to = lp0;
route[0].stable = false;
IV2SwapRouter(unirouter).swapExactTokensForTokens(half_auUSDC_bal, 1, route, address(this));
}
uint256 lp0b = IERC20(lp0).balanceOf(address(this));
uint256 lp1b = IERC20(lp1).balanceOf(address(this));
if (lp0b > 0 && lp1b > 0) {
IRouterV2(lpRouter).addLiquidity(lp0, lp1, false, lp0b, lp1b, 0, 0, address(this), block.timestamp);
}
}
/** @dev Determines the amount of reward in WFTM upon calling the harvest function */
function harvestCallReward() public view returns (uint256) {
return uint256(0);
}
/** @dev Sets harvest on deposit to @param _harvestOnDeposit */
function setHarvestOnDeposit(bool _harvestOnDeposit) external onlyOwner {
harvestOnDeposit = _harvestOnDeposit;
if (harvestOnDeposit) {
setWithdrawalFee(0);
} else {
setWithdrawalFee(10);
}
}
/** @dev Returns the amount of rewards that are pending */
function rewardsAvailable() public view returns (uint256) {
return ISwapXGauge(rewardPool).earned(address(this));
}
/** @dev calculate the total underlaying staking tokens held by the strat */
function balanceOf() public view returns (uint256) {
return balanceOfStakingToken() + balanceOfPool();
}
/** @dev it calculates how many staking tokens this contract holds */
function balanceOfStakingToken() public view returns (uint256) {
return IERC20(staking_token).balanceOf(address(this));
}
/** @dev it calculates how many staking tokens the strategy has working in the farm */
function balanceOfPool() public view returns (uint256) {
return ISwapXGauge(rewardPool).balanceOf(address(this));
// return _amount;
}
/** @dev called as part of strat migration. Sends all the available funds back to the vault */
function retireStrat() external {
require(msg.sender == vault, "!vault");
ISwapXGauge(rewardPool).withdraw(balanceOfPool());
uint256 stakingBal = IERC20(staking_token).balanceOf(address(this));
IERC20(staking_token).transfer(vault, stakingBal);
}
/** @dev Pauses the strategy contract */
function pause() public onlyOwner {
_pause();
_removeAllowances();
}
/** @dev Unpauses the strategy contract */
function unpause() external onlyOwner {
_unpause();
_giveAllowances();
_deposit();
}
/** @dev Gives allowances to spenders */
function _giveAllowances() internal {
IERC20(staking_token).approve(rewardPool, type(uint256).max);
IERC20(native_token).approve(unirouter, type(uint256).max);
IERC20(reward_token).approve(unirouter, type(uint256).max);
IERC20(usdc).approve(AURUM, type(uint256).max);
IERC20(lp0).approve(unirouter, type(uint256).max);
IERC20(lp1).approve(unirouter, type(uint256).max);
IERC20(lp0).approve(lpRouter, type(uint256).max);
IERC20(lp1).approve(lpRouter, type(uint256).max);
}
/** @dev Removes allowances to spenders */
function _removeAllowances() internal {
IERC20(staking_token).approve(rewardPool, 0);
IERC20(native_token).approve(unirouter, 0);
IERC20(reward_token).approve(unirouter, 0);
IERC20(usdc).approve(AURUM, 0);
IERC20(lp0).approve(unirouter, 0);
IERC20(lp1).approve(unirouter, 0);
IERC20(lp0).approve(lpRouter, 0);
IERC20(lp1).approve(lpRouter, 0);
}
/**
* @dev Sets the withdrawal fee for the strategy.
*
* - Ensures that the fee does not exceed 100 (representing 1%).
* - Updates the `WITHDRAW_FEE` variable with the new fee value.
*
* Requirements:
* - `fee` must be less than or equal to 100.
*
* @param fee The new withdrawal fee (scaled by 100,000 for precision). */
function setWithdrawalFee(uint256 fee) internal {
require(fee <= 100, "Fee too high");
WITHDRAW_FEE = fee;
emit SetWithdrawalFee(fee);
}
/**
* @dev Allows the contract owner to set the slippage tolerance for token swaps.
* This value is used to calculate the minimum acceptable output amount in swaps,
* helping to mitigate the risks of slippage and unfavorable price changes.
*
* Requirements:
* - The caller must be the contract owner.
* - The provided tolerance must be less than or equal to 1500 (representing a maximum of 15% slippage).
*
* Emits:
* - A {SetSlippageTolerance} event indicating the updated slippage tolerance.
*
* @param _tolerance The new slippage tolerance value, scaled by 10,000 (e.g., 1500 = 15%).
*/
function setSlippageTolerance(uint256 _tolerance) external onlyOwner {
require(_tolerance <= 1500, "Invalid tolerance"); // Max 15%
slippageTolerance = _tolerance;
emit SetSlippageTolerance(slippageTolerance);
}
function isContract(address account) internal view returns (bool) {
return account.code.length > 0;
}
function setRefCode(uint16 _code) external onlyOwner {
refCode = _code;
}
modifier onlyAuthorized() {
require(
msg.sender == vault || msg.sender == address(this),
"Not authorized, only Vault or Strategy"
);
_;
}
}
pragma solidity ^0.8.0;
/**
* @title IPool
* @author Aave
* @notice Defines the basic interface for an Aave Pool.
*/
interface IPool {
/**
* @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
* - E.g. User supplies 100 USDC and gets in return 100 aUSDC
* @param asset The address of the underlying asset to supply
* @param amount The amount to be supplied
* @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
* wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
* is a different wallet
* @param referralCode Code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
*/
function supply(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;
/**
* @notice Supply with transfer approval of asset to be supplied done via permit function
* see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
* @param asset The address of the underlying asset to supply
* @param amount The amount to be supplied
* @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
* wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
* is a different wallet
* @param deadline The deadline timestamp that the permit is valid
* @param referralCode Code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
* @param permitV The V parameter of ERC712 permit sig
* @param permitR The R parameter of ERC712 permit sig
* @param permitS The S parameter of ERC712 permit sig
*/
function supplyWithPermit(
address asset,
uint256 amount,
address onBehalfOf,
uint16 referralCode,
uint256 deadline,
uint8 permitV,
bytes32 permitR,
bytes32 permitS
) external;
/**
* @notice Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
* E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
* @param asset The address of the underlying asset to withdraw
* @param amount The underlying amount to be withdrawn
* - Send the value type(uint256).max in order to withdraw the whole aToken balance
* @param to The address that will receive the underlying, same as msg.sender if the user
* wants to receive it on his own wallet, or a different address if the beneficiary is a
* different wallet
* @return The final amount withdrawn
*/
function withdraw(address asset, uint256 amount, address to) external returns (uint256);
/**
* @notice Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
* already supplied enough collateral, or he was given enough allowance by a credit delegator on the
* corresponding debt token (StableDebtToken or VariableDebtToken)
* - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
* and 100 stable/variable debt tokens, depending on the `interestRateMode`
* @param asset The address of the underlying asset to borrow
* @param amount The amount to be borrowed
* @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable
* @param referralCode The code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
* @param onBehalfOf The address of the user who will receive the debt. Should be the address of the borrower itself
* calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
* if he has been given credit delegation allowance
*/
function borrow(
address asset,
uint256 amount,
uint256 interestRateMode,
uint16 referralCode,
address onBehalfOf
) external;
/**
* @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
* - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address
* @param asset The address of the borrowed underlying asset previously borrowed
* @param amount The amount to repay
* - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
* @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
* @param onBehalfOf The address of the user who will get his debt reduced/removed. Should be the address of the
* user calling the function if he wants to reduce/remove his own debt, or the address of any other
* other borrower whose debt should be removed
* @return The final amount repaid
*/
function repay(
address asset,
uint256 amount,
uint256 interestRateMode,
address onBehalfOf
) external returns (uint256);
/**
* @notice Repay with transfer approval of asset to be repaid done via permit function
* see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
* @param asset The address of the borrowed underlying asset previously borrowed
* @param amount The amount to repay
* - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
* @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
* @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
* user calling the function if he wants to reduce/remove his own debt, or the address of any other
* other borrower whose debt should be removed
* @param deadline The deadline timestamp that the permit is valid
* @param permitV The V parameter of ERC712 permit sig
* @param permitR The R parameter of ERC712 permit sig
* @param permitS The S parameter of ERC712 permit sig
* @return The final amount repaid
*/
function repayWithPermit(
address asset,
uint256 amount,
uint256 interestRateMode,
address onBehalfOf,
uint256 deadline,
uint8 permitV,
bytes32 permitR,
bytes32 permitS
) external returns (uint256);
/**
* @notice Repays a borrowed `amount` on a specific reserve using the reserve aTokens, burning the
* equivalent debt tokens
* - E.g. User repays 100 USDC using 100 aUSDC, burning 100 variable/stable debt tokens
* @dev Passing uint256.max as amount will clean up any residual aToken dust balance, if the user aToken
* balance is not enough to cover the whole debt
* @param asset The address of the borrowed underlying asset previously borrowed
* @param amount The amount to repay
* - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
* @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
* @return The final amount repaid
*/
function repayWithATokens(
address asset,
uint256 amount,
uint256 interestRateMode
) external returns (uint256);
/**
* @notice Allows a borrower to swap his debt between stable and variable mode, or vice versa
* @param asset The address of the underlying asset borrowed
* @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
*/
function swapBorrowRateMode(address asset, uint256 interestRateMode) external;
/**
* @notice Rebalances the stable interest rate of a user to the current stable rate defined on the reserve.
* - Users can be rebalanced if the following conditions are satisfied:
* 1. Usage ratio is above 95%
* 2. the current supply APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too
* much has been borrowed at a stable rate and suppliers are not earning enough
* @param asset The address of the underlying asset borrowed
* @param user The address of the user to be rebalanced
*/
function rebalanceStableBorrowRate(address asset, address user) external;
/**
* @notice Allows suppliers to enable/disable a specific supplied asset as collateral
* @param asset The address of the underlying asset supplied
* @param useAsCollateral True if the user wants to use the supply as collateral, false otherwise
*/
function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;
/**
* @notice Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
* - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
* a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
* @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
* @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
* @param user The address of the borrower getting liquidated
* @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
* @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
* to receive the underlying collateral asset directly
*/
function liquidationCall(
address collateralAsset,
address debtAsset,
address user,
uint256 debtToCover,
bool receiveAToken
) external;
/**
* @notice Returns the user account data across all the reserves
* @param user The address of the user
* @return totalCollateralBase The total collateral of the user in the base currency used by the price feed
* @return totalDebtBase The total debt of the user in the base currency used by the price feed
* @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed
* @return currentLiquidationThreshold The liquidation threshold of the user
* @return ltv The loan to value of The user
* @return healthFactor The current health factor of the user
*/
function getUserAccountData(
address user
)
external
view
returns (
uint256 totalCollateralBase,
uint256 totalDebtBase,
uint256 availableBorrowsBase,
uint256 currentLiquidationThreshold,
uint256 ltv,
uint256 healthFactor
);
/**
* @notice Validates and finalizes an aToken transfer
* @dev Only callable by the overlying aToken of the `asset`
* @param asset The address of the underlying asset of the aToken
* @param from The user from which the aTokens are transferred
* @param to The user receiving the aTokens
* @param amount The amount being transferred/withdrawn
* @param balanceFromBefore The aToken balance of the `from` user before the transfer
* @param balanceToBefore The aToken balance of the `to` user before the transfer
*/
function finalizeTransfer(
address asset,
address from,
address to,
uint256 amount,
uint256 balanceFromBefore,
uint256 balanceToBefore
) external;
/**
* @notice Returns the list of the underlying assets of all the initialized reserves
* @dev It does not include dropped reserves
* @return The addresses of the underlying assets of the initialized reserves
*/
function getReservesList() external view returns (address[] memory);
/**
* @notice Returns the address of the underlying asset of a reserve by the reserve id as stored in the DataTypes.ReserveData struct
* @param id The id of the reserve as stored in the DataTypes.ReserveData struct
* @return The address of the reserve associated with id
*/
function getReserveAddressById(uint16 id) external view returns (address);
/**
* @notice Updates flash loan premiums. Flash loan premium consists of two parts:
* - A part is sent to aToken holders as extra, one time accumulated interest
* - A part is collected by the protocol treasury
* @dev The total premium is calculated on the total borrowed amount
* @dev The premium to protocol is calculated on the total premium, being a percentage of `flashLoanPremiumTotal`
* @dev Only callable by the PoolConfigurator contract
* @param flashLoanPremiumTotal The total premium, expressed in bps
* @param flashLoanPremiumToProtocol The part of the premium sent to the protocol treasury, expressed in bps
*/
function updateFlashloanPremiums(
uint128 flashLoanPremiumTotal,
uint128 flashLoanPremiumToProtocol
) external;
/**
* @notice Allows a user to use the protocol in eMode
* @param categoryId The id of the category
*/
function setUserEMode(uint8 categoryId) external;
/**
* @notice Returns the eMode the user is using
* @param user The address of the user
* @return The eMode id
*/
function getUserEMode(address user) external view returns (uint256);
/**
* @notice Resets the isolation mode total debt of the given asset to zero
* @dev It requires the given asset has zero debt ceiling
* @param asset The address of the underlying asset to reset the isolationModeTotalDebt
*/
function resetIsolationModeTotalDebt(address asset) external;
/**
* @notice Returns the percentage of available liquidity that can be borrowed at once at stable rate
* @return The percentage of available liquidity to borrow, expressed in bps
*/
function MAX_STABLE_RATE_BORROW_SIZE_PERCENT() external view returns (uint256);
/**
* @notice Returns the total fee on flash loans
* @return The total fee on flashloans
*/
function FLASHLOAN_PREMIUM_TOTAL() external view returns (uint128);
/**
* @notice Returns the part of the bridge fees sent to protocol
* @return The bridge fee sent to the protocol treasury
*/
function BRIDGE_PROTOCOL_FEE() external view returns (uint256);
/**
* @notice Returns the part of the flashloan fees sent to protocol
* @return The flashloan fee sent to the protocol treasury
*/
function FLASHLOAN_PREMIUM_TO_PROTOCOL() external view returns (uint128);
/**
* @notice Returns the maximum number of reserves supported to be listed in this Pool
* @return The maximum number of reserves supported
*/
function MAX_NUMBER_RESERVES() external view returns (uint16);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.7.5;
/// @title Router token swapping functionality
/// @notice Functions for swapping tokens via Algebra
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
interface ISwapX {
struct ExactInputSingleParams {
address tokenIn;
address tokenOut;
address recipient;
uint256 amountIn;
uint256 amountOutMinimum;
uint160 limitSqrtPrice;
}
/// @notice Swaps `amountIn` of one token for as much as possible of another token
/// @dev Setting `amountIn` to 0 will cause the contract to look up its own balance,
/// and swap the entire amount, enabling contracts to send tokens before calling this function.
/// @param params The parameters necessary for the swap, encoded as `ExactInputSingleParams` in calldata
/// @return amountOut The amount of the received token
function exactInputSingle(ExactInputSingleParams calldata params) external payable returns (uint256 amountOut);
struct ExactInputParams {
bytes path;
address recipient;
uint256 amountIn;
uint256 amountOutMinimum;
}
/// @notice Swaps `amountIn` of one token for as much as possible of another along the specified path
/// @dev Setting `amountIn` to 0 will cause the contract to look up its own balance,
/// and swap the entire amount, enabling contracts to send tokens before calling this function.
/// @param params The parameters necessary for the multi-hop swap, encoded as `ExactInputParams` in calldata
/// @return amountOut The amount of the received token
function exactInput(ExactInputParams calldata params) external payable returns (uint256 amountOut);
struct ExactOutputSingleParams {
address tokenIn;
address tokenOut;
address recipient;
uint256 amountOut;
uint256 amountInMaximum;
uint160 limitSqrtPrice;
}
/// @notice Swaps as little as possible of one token for `amountOut` of another token
/// that may remain in the router after the swap.
/// @param params The parameters necessary for the swap, encoded as `ExactOutputSingleParams` in calldata
/// @return amountIn The amount of the input token
function exactOutputSingle(ExactOutputSingleParams calldata params) external payable returns (uint256 amountIn);
struct ExactOutputParams {
bytes path;
address recipient;
uint256 amountOut;
uint256 amountInMaximum;
}
/// @notice Swaps as little as possible of one token for `amountOut` of another along the specified path (reversed)
/// that may remain in the router after the swap.
/// @param params The parameters necessary for the multi-hop swap, encoded as `ExactOutputParams` in calldata
/// @return amountIn The amount of the input token
function exactOutput(ExactOutputParams calldata params) external payable returns (uint256 amountIn);
/// @notice Swaps `amountIn` of one token for as much as possible of another along the specified path
/// @dev Unlike standard swaps, handles transferring from user before the actual swap.
/// @param params The parameters necessary for the multi-hop swap, encoded as `ExactInputParams` in calldata
/// @return amountOut The amount of the received token
function exactInputSingleSupportingFeeOnTransferTokens(
ExactInputSingleParams calldata params
) external payable returns (uint256 amountOut);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.20;
interface ISwapXGauge {
/* -----------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
VIEW
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
----------------------------------------------------------------------------- */
///@notice total supply held
function totalSupply() external view returns (uint256);
///@notice balance of a user
function balanceOf(address account) external view returns (uint256);
///@notice last time reward
function lastTimeRewardApplicable() external view returns (uint256);
///@notice reward for a sinle token
function rewardPerToken() external view returns (uint256);
///@notice see earned rewards for user
function earned(address account) external view returns (uint256);
///@notice get total reward for the duration
function rewardForDuration() external view returns (uint256);
function _periodFinish() external view returns (uint256);
/* -----------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
USER INTERACTION
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
----------------------------------------------------------------------------- */
///@notice deposit all TOKEN of msg.sender
function depositAll() external;
///@notice deposit amount TOKEN
function deposit(uint256 amount) external;
///@notice withdraw all token
function withdrawAll() external;
///@notice withdraw a certain amount of TOKEN
function withdraw(uint256 amount) external;
function emergencyWithdraw() external;
function emergencyWithdrawAmount(uint256 _amount) external;
///@notice withdraw all TOKEN and harvest rewardToken
function withdrawAllAndHarvest() external;
///@notice User harvest function called from distribution (voter allows harvest on multiple gauges)
function getReward(address _user) external;
///@notice User harvest function
function getReward() external;
/* -----------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
DISTRIBUTION
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
----------------------------------------------------------------------------- */
/// @dev Receive rewards from distribution
function notifyRewardAmount(
address token,
uint reward
) external;
function claimFees()
external
returns (uint claimed0, uint claimed1);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.20;
interface IPair {
function metadata() external view returns (uint dec0, uint dec1, uint r0, uint r1, bool st, address t0, address t1);
function claimFees() external returns (uint, uint);
function tokens() external view returns (address, address);
function token0() external view returns (address);
function token1() external view returns (address);
function transferFrom(address src, address dst, uint amount) external returns (bool);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function burn(address to) external returns (uint amount0, uint amount1);
function mint(address to) external returns (uint liquidity);
function getReserves() external view returns (uint _reserve0, uint _reserve1, uint _blockTimestampLast);
function getAmountOut(uint, address) external view returns (uint);
function name() external view returns(string memory);
function symbol() external view returns(string memory);
function totalSupply() external view returns (uint);
function decimals() external view returns (uint8);
function claimable0(address _user) external view returns (uint);
function claimable1(address _user) external view returns (uint);
function isStable() external view returns(bool);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.20;
interface IRouterV2 {
struct route {
address from;
address to;
bool stable;
}
// performs chained getAmountOut calculations on any number of pairs
function getAmountOut(
uint amountIn,
address tokenIn,
address tokenOut
) external view returns (uint amount, bool stable);
// performs chained getAmountOut calculations on any number of pairs
function getAmountsOut(
uint amountIn,
route[] memory routes
) external view returns (uint[] memory amounts);
function isPair(address pair) external view returns (bool);
function quoteAddLiquidity(
address tokenA,
address tokenB,
bool stable,
uint amountADesired,
uint amountBDesired
) external view returns (uint amountA, uint amountB, uint liquidity);
function quoteRemoveLiquidity(
address tokenA,
address tokenB,
bool stable,
uint liquidity
) external view returns (uint amountA, uint amountB);
function addLiquidity(
address tokenA,
address tokenB,
bool stable,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
bool stable,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH, uint liquidity);
// **** REMOVE LIQUIDITY ****
function removeLiquidity(
address tokenA,
address tokenB,
bool stable,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
bool stable,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
bool stable,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
bool stable,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokensSimple(
uint amountIn,
uint amountOutMin,
address tokenFrom,
address tokenTo,
bool stable,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
route[] calldata routes,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(
uint amountOutMin,
route[] calldata routes,
address to,
uint deadline
) external payable returns (uint[] memory amounts);
function swapExactTokensForETH(
uint amountIn,
uint amountOutMin,
route[] calldata routes,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
route[] calldata routes,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
route[] calldata routes,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
route[] calldata routes,
address to,
uint deadline
) external;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.7.5;
pragma abicoder v2;
/// @title Router token swapping functionality
/// @notice Functions for swapping tokens via Uniswap V2
interface IV2SwapRouter {
struct Route {
address from;
address to;
bool stable;
}
/// @notice Swaps `amountIn` of one token for as much as possible of another token
/// @dev Setting `amountIn` to 0 will cause the contract to look up its own balance,
/// and swap the entire amount, enabling contracts to send tokens before calling this function.
/// @param amountIn The amount of token to swap
/// @param amountOutMin The minimum amount of output that must be received
/// @param path The ordered list of tokens to swap through
/// @param to The recipient address
/// @return amountOut The amount of the received token
function swapExactTokensForTokens(
uint256 amountIn,
uint256 amountOutMin,
Route[] calldata path,
address to
) external payable returns (uint256 amountOut);
}