Contract Name:
ProofOfPlay
Contract Source Code:
File 1 of 1 : ProofOfPlay
// SPDX-License-Identifier: MIT
// File: abdk-libraries-solidity/ABDKMath64x64.sol
/*
* ABDK Math 64.64 Smart Contract Library. Copyright © 2019 by ABDK Consulting.
* Author: Mikhail Vladimirov <[email protected]>
*/
pragma solidity ^0.8.0;
/**
* Smart contract library of mathematical functions operating with signed
* 64.64-bit fixed point numbers. Signed 64.64-bit fixed point number is
* basically a simple fraction whose numerator is signed 128-bit integer and
* denominator is 2^64. As long as denominator is always the same, there is no
* need to store it, thus in Solidity signed 64.64-bit fixed point numbers are
* represented by int128 type holding only the numerator.
*/
library ABDKMath64x64 {
/*
* Minimum value signed 64.64-bit fixed point number may have.
*/
int128 private constant MIN_64x64 = -0x80000000000000000000000000000000;
/*
* Maximum value signed 64.64-bit fixed point number may have.
*/
int128 private constant MAX_64x64 = 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF;
/**
* Convert signed 256-bit integer number into signed 64.64-bit fixed point
* number. Revert on overflow.
*
* @param x signed 256-bit integer number
* @return signed 64.64-bit fixed point number
*/
function fromInt (int256 x) internal pure returns (int128) {
unchecked {
require (x >= -0x8000000000000000 && x <= 0x7FFFFFFFFFFFFFFF);
return int128 (x << 64);
}
}
/**
* Convert signed 64.64 fixed point number into signed 64-bit integer number
* rounding down.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64-bit integer number
*/
function toInt (int128 x) internal pure returns (int64) {
unchecked {
return int64 (x >> 64);
}
}
/**
* Convert unsigned 256-bit integer number into signed 64.64-bit fixed point
* number. Revert on overflow.
*
* @param x unsigned 256-bit integer number
* @return signed 64.64-bit fixed point number
*/
function fromUInt (uint256 x) internal pure returns (int128) {
unchecked {
require (x <= 0x7FFFFFFFFFFFFFFF);
return int128 (int256 (x << 64));
}
}
/**
* Convert signed 64.64 fixed point number into unsigned 64-bit integer
* number rounding down. Revert on underflow.
*
* @param x signed 64.64-bit fixed point number
* @return unsigned 64-bit integer number
*/
function toUInt (int128 x) internal pure returns (uint64) {
unchecked {
require (x >= 0);
return uint64 (uint128 (x >> 64));
}
}
/**
* Convert signed 128.128 fixed point number into signed 64.64-bit fixed point
* number rounding down. Revert on overflow.
*
* @param x signed 128.128-bin fixed point number
* @return signed 64.64-bit fixed point number
*/
function from128x128 (int256 x) internal pure returns (int128) {
unchecked {
int256 result = x >> 64;
require (result >= MIN_64x64 && result <= MAX_64x64);
return int128 (result);
}
}
/**
* Convert signed 64.64 fixed point number into signed 128.128 fixed point
* number.
*
* @param x signed 64.64-bit fixed point number
* @return signed 128.128 fixed point number
*/
function to128x128 (int128 x) internal pure returns (int256) {
unchecked {
return int256 (x) << 64;
}
}
/**
* Calculate x + y. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function add (int128 x, int128 y) internal pure returns (int128) {
unchecked {
int256 result = int256(x) + y;
require (result >= MIN_64x64 && result <= MAX_64x64);
return int128 (result);
}
}
/**
* Calculate x - y. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function sub (int128 x, int128 y) internal pure returns (int128) {
unchecked {
int256 result = int256(x) - y;
require (result >= MIN_64x64 && result <= MAX_64x64);
return int128 (result);
}
}
/**
* Calculate x * y rounding down. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function mul (int128 x, int128 y) internal pure returns (int128) {
unchecked {
int256 result = int256(x) * y >> 64;
require (result >= MIN_64x64 && result <= MAX_64x64);
return int128 (result);
}
}
/**
* Calculate x * y rounding towards zero, where x is signed 64.64 fixed point
* number and y is signed 256-bit integer number. Revert on overflow.
*
* @param x signed 64.64 fixed point number
* @param y signed 256-bit integer number
* @return signed 256-bit integer number
*/
function muli (int128 x, int256 y) internal pure returns (int256) {
unchecked {
if (x == MIN_64x64) {
require (y >= -0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF &&
y <= 0x1000000000000000000000000000000000000000000000000);
return -y << 63;
} else {
bool negativeResult = false;
if (x < 0) {
x = -x;
negativeResult = true;
}
if (y < 0) {
y = -y; // We rely on overflow behavior here
negativeResult = !negativeResult;
}
uint256 absoluteResult = mulu (x, uint256 (y));
if (negativeResult) {
require (absoluteResult <=
0x8000000000000000000000000000000000000000000000000000000000000000);
return -int256 (absoluteResult); // We rely on overflow behavior here
} else {
require (absoluteResult <=
0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
return int256 (absoluteResult);
}
}
}
}
/**
* Calculate x * y rounding down, where x is signed 64.64 fixed point number
* and y is unsigned 256-bit integer number. Revert on overflow.
*
* @param x signed 64.64 fixed point number
* @param y unsigned 256-bit integer number
* @return unsigned 256-bit integer number
*/
function mulu (int128 x, uint256 y) internal pure returns (uint256) {
unchecked {
if (y == 0) return 0;
require (x >= 0);
uint256 lo = (uint256 (int256 (x)) * (y & 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)) >> 64;
uint256 hi = uint256 (int256 (x)) * (y >> 128);
require (hi <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
hi <<= 64;
require (hi <=
0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF - lo);
return hi + lo;
}
}
/**
* Calculate x / y rounding towards zero. Revert on overflow or when y is
* zero.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function div (int128 x, int128 y) internal pure returns (int128) {
unchecked {
require (y != 0);
int256 result = (int256 (x) << 64) / y;
require (result >= MIN_64x64 && result <= MAX_64x64);
return int128 (result);
}
}
/**
* Calculate x / y rounding towards zero, where x and y are signed 256-bit
* integer numbers. Revert on overflow or when y is zero.
*
* @param x signed 256-bit integer number
* @param y signed 256-bit integer number
* @return signed 64.64-bit fixed point number
*/
function divi (int256 x, int256 y) internal pure returns (int128) {
unchecked {
require (y != 0);
bool negativeResult = false;
if (x < 0) {
x = -x; // We rely on overflow behavior here
negativeResult = true;
}
if (y < 0) {
y = -y; // We rely on overflow behavior here
negativeResult = !negativeResult;
}
uint128 absoluteResult = divuu (uint256 (x), uint256 (y));
if (negativeResult) {
require (absoluteResult <= 0x80000000000000000000000000000000);
return -int128 (absoluteResult); // We rely on overflow behavior here
} else {
require (absoluteResult <= 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
return int128 (absoluteResult); // We rely on overflow behavior here
}
}
}
/**
* Calculate x / y rounding towards zero, where x and y are unsigned 256-bit
* integer numbers. Revert on overflow or when y is zero.
*
* @param x unsigned 256-bit integer number
* @param y unsigned 256-bit integer number
* @return signed 64.64-bit fixed point number
*/
function divu (uint256 x, uint256 y) internal pure returns (int128) {
unchecked {
require (y != 0);
uint128 result = divuu (x, y);
require (result <= uint128 (MAX_64x64));
return int128 (result);
}
}
/**
* Calculate -x. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function neg (int128 x) internal pure returns (int128) {
unchecked {
require (x != MIN_64x64);
return -x;
}
}
/**
* Calculate |x|. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function abs (int128 x) internal pure returns (int128) {
unchecked {
require (x != MIN_64x64);
return x < 0 ? -x : x;
}
}
/**
* Calculate 1 / x rounding towards zero. Revert on overflow or when x is
* zero.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function inv (int128 x) internal pure returns (int128) {
unchecked {
require (x != 0);
int256 result = int256 (0x100000000000000000000000000000000) / x;
require (result >= MIN_64x64 && result <= MAX_64x64);
return int128 (result);
}
}
/**
* Calculate arithmetics average of x and y, i.e. (x + y) / 2 rounding down.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function avg (int128 x, int128 y) internal pure returns (int128) {
unchecked {
return int128 ((int256 (x) + int256 (y)) >> 1);
}
}
/**
* Calculate geometric average of x and y, i.e. sqrt (x * y) rounding down.
* Revert on overflow or in case x * y is negative.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function gavg (int128 x, int128 y) internal pure returns (int128) {
unchecked {
int256 m = int256 (x) * int256 (y);
require (m >= 0);
require (m <
0x4000000000000000000000000000000000000000000000000000000000000000);
return int128 (sqrtu (uint256 (m)));
}
}
/**
* Calculate x^y assuming 0^0 is 1, where x is signed 64.64 fixed point number
* and y is unsigned 256-bit integer number. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @param y uint256 value
* @return signed 64.64-bit fixed point number
*/
function pow (int128 x, uint256 y) internal pure returns (int128) {
unchecked {
bool negative = x < 0 && y & 1 == 1;
uint256 absX = uint128 (x < 0 ? -x : x);
uint256 absResult;
absResult = 0x100000000000000000000000000000000;
if (absX <= 0x10000000000000000) {
absX <<= 63;
while (y != 0) {
if (y & 0x1 != 0) {
absResult = absResult * absX >> 127;
}
absX = absX * absX >> 127;
if (y & 0x2 != 0) {
absResult = absResult * absX >> 127;
}
absX = absX * absX >> 127;
if (y & 0x4 != 0) {
absResult = absResult * absX >> 127;
}
absX = absX * absX >> 127;
if (y & 0x8 != 0) {
absResult = absResult * absX >> 127;
}
absX = absX * absX >> 127;
y >>= 4;
}
absResult >>= 64;
} else {
uint256 absXShift = 63;
if (absX < 0x1000000000000000000000000) { absX <<= 32; absXShift -= 32; }
if (absX < 0x10000000000000000000000000000) { absX <<= 16; absXShift -= 16; }
if (absX < 0x1000000000000000000000000000000) { absX <<= 8; absXShift -= 8; }
if (absX < 0x10000000000000000000000000000000) { absX <<= 4; absXShift -= 4; }
if (absX < 0x40000000000000000000000000000000) { absX <<= 2; absXShift -= 2; }
if (absX < 0x80000000000000000000000000000000) { absX <<= 1; absXShift -= 1; }
uint256 resultShift = 0;
while (y != 0) {
require (absXShift < 64);
if (y & 0x1 != 0) {
absResult = absResult * absX >> 127;
resultShift += absXShift;
if (absResult > 0x100000000000000000000000000000000) {
absResult >>= 1;
resultShift += 1;
}
}
absX = absX * absX >> 127;
absXShift <<= 1;
if (absX >= 0x100000000000000000000000000000000) {
absX >>= 1;
absXShift += 1;
}
y >>= 1;
}
require (resultShift < 64);
absResult >>= 64 - resultShift;
}
int256 result = negative ? -int256 (absResult) : int256 (absResult);
require (result >= MIN_64x64 && result <= MAX_64x64);
return int128 (result);
}
}
/**
* Calculate sqrt (x) rounding down. Revert if x < 0.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function sqrt (int128 x) internal pure returns (int128) {
unchecked {
require (x >= 0);
return int128 (sqrtu (uint256 (int256 (x)) << 64));
}
}
/**
* Calculate binary logarithm of x. Revert if x <= 0.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function log_2 (int128 x) internal pure returns (int128) {
unchecked {
require (x > 0);
int256 msb = 0;
int256 xc = x;
if (xc >= 0x10000000000000000) { xc >>= 64; msb += 64; }
if (xc >= 0x100000000) { xc >>= 32; msb += 32; }
if (xc >= 0x10000) { xc >>= 16; msb += 16; }
if (xc >= 0x100) { xc >>= 8; msb += 8; }
if (xc >= 0x10) { xc >>= 4; msb += 4; }
if (xc >= 0x4) { xc >>= 2; msb += 2; }
if (xc >= 0x2) msb += 1; // No need to shift xc anymore
int256 result = msb - 64 << 64;
uint256 ux = uint256 (int256 (x)) << uint256 (127 - msb);
for (int256 bit = 0x8000000000000000; bit > 0; bit >>= 1) {
ux *= ux;
uint256 b = ux >> 255;
ux >>= 127 + b;
result += bit * int256 (b);
}
return int128 (result);
}
}
/**
* Calculate natural logarithm of x. Revert if x <= 0.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function ln (int128 x) internal pure returns (int128) {
unchecked {
require (x > 0);
return int128 (int256 (
uint256 (int256 (log_2 (x))) * 0xB17217F7D1CF79ABC9E3B39803F2F6AF >> 128));
}
}
/**
* Calculate binary exponent of x. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function exp_2 (int128 x) internal pure returns (int128) {
unchecked {
require (x < 0x400000000000000000); // Overflow
if (x < -0x400000000000000000) return 0; // Underflow
uint256 result = 0x80000000000000000000000000000000;
if (x & 0x8000000000000000 > 0)
result = result * 0x16A09E667F3BCC908B2FB1366EA957D3E >> 128;
if (x & 0x4000000000000000 > 0)
result = result * 0x1306FE0A31B7152DE8D5A46305C85EDEC >> 128;
if (x & 0x2000000000000000 > 0)
result = result * 0x1172B83C7D517ADCDF7C8C50EB14A791F >> 128;
if (x & 0x1000000000000000 > 0)
result = result * 0x10B5586CF9890F6298B92B71842A98363 >> 128;
if (x & 0x800000000000000 > 0)
result = result * 0x1059B0D31585743AE7C548EB68CA417FD >> 128;
if (x & 0x400000000000000 > 0)
result = result * 0x102C9A3E778060EE6F7CACA4F7A29BDE8 >> 128;
if (x & 0x200000000000000 > 0)
result = result * 0x10163DA9FB33356D84A66AE336DCDFA3F >> 128;
if (x & 0x100000000000000 > 0)
result = result * 0x100B1AFA5ABCBED6129AB13EC11DC9543 >> 128;
if (x & 0x80000000000000 > 0)
result = result * 0x10058C86DA1C09EA1FF19D294CF2F679B >> 128;
if (x & 0x40000000000000 > 0)
result = result * 0x1002C605E2E8CEC506D21BFC89A23A00F >> 128;
if (x & 0x20000000000000 > 0)
result = result * 0x100162F3904051FA128BCA9C55C31E5DF >> 128;
if (x & 0x10000000000000 > 0)
result = result * 0x1000B175EFFDC76BA38E31671CA939725 >> 128;
if (x & 0x8000000000000 > 0)
result = result * 0x100058BA01FB9F96D6CACD4B180917C3D >> 128;
if (x & 0x4000000000000 > 0)
result = result * 0x10002C5CC37DA9491D0985C348C68E7B3 >> 128;
if (x & 0x2000000000000 > 0)
result = result * 0x1000162E525EE054754457D5995292026 >> 128;
if (x & 0x1000000000000 > 0)
result = result * 0x10000B17255775C040618BF4A4ADE83FC >> 128;
if (x & 0x800000000000 > 0)
result = result * 0x1000058B91B5BC9AE2EED81E9B7D4CFAB >> 128;
if (x & 0x400000000000 > 0)
result = result * 0x100002C5C89D5EC6CA4D7C8ACC017B7C9 >> 128;
if (x & 0x200000000000 > 0)
result = result * 0x10000162E43F4F831060E02D839A9D16D >> 128;
if (x & 0x100000000000 > 0)
result = result * 0x100000B1721BCFC99D9F890EA06911763 >> 128;
if (x & 0x80000000000 > 0)
result = result * 0x10000058B90CF1E6D97F9CA14DBCC1628 >> 128;
if (x & 0x40000000000 > 0)
result = result * 0x1000002C5C863B73F016468F6BAC5CA2B >> 128;
if (x & 0x20000000000 > 0)
result = result * 0x100000162E430E5A18F6119E3C02282A5 >> 128;
if (x & 0x10000000000 > 0)
result = result * 0x1000000B1721835514B86E6D96EFD1BFE >> 128;
if (x & 0x8000000000 > 0)
result = result * 0x100000058B90C0B48C6BE5DF846C5B2EF >> 128;
if (x & 0x4000000000 > 0)
result = result * 0x10000002C5C8601CC6B9E94213C72737A >> 128;
if (x & 0x2000000000 > 0)
result = result * 0x1000000162E42FFF037DF38AA2B219F06 >> 128;
if (x & 0x1000000000 > 0)
result = result * 0x10000000B17217FBA9C739AA5819F44F9 >> 128;
if (x & 0x800000000 > 0)
result = result * 0x1000000058B90BFCDEE5ACD3C1CEDC823 >> 128;
if (x & 0x400000000 > 0)
result = result * 0x100000002C5C85FE31F35A6A30DA1BE50 >> 128;
if (x & 0x200000000 > 0)
result = result * 0x10000000162E42FF0999CE3541B9FFFCF >> 128;
if (x & 0x100000000 > 0)
result = result * 0x100000000B17217F80F4EF5AADDA45554 >> 128;
if (x & 0x80000000 > 0)
result = result * 0x10000000058B90BFBF8479BD5A81B51AD >> 128;
if (x & 0x40000000 > 0)
result = result * 0x1000000002C5C85FDF84BD62AE30A74CC >> 128;
if (x & 0x20000000 > 0)
result = result * 0x100000000162E42FEFB2FED257559BDAA >> 128;
if (x & 0x10000000 > 0)
result = result * 0x1000000000B17217F7D5A7716BBA4A9AE >> 128;
if (x & 0x8000000 > 0)
result = result * 0x100000000058B90BFBE9DDBAC5E109CCE >> 128;
if (x & 0x4000000 > 0)
result = result * 0x10000000002C5C85FDF4B15DE6F17EB0D >> 128;
if (x & 0x2000000 > 0)
result = result * 0x1000000000162E42FEFA494F1478FDE05 >> 128;
if (x & 0x1000000 > 0)
result = result * 0x10000000000B17217F7D20CF927C8E94C >> 128;
if (x & 0x800000 > 0)
result = result * 0x1000000000058B90BFBE8F71CB4E4B33D >> 128;
if (x & 0x400000 > 0)
result = result * 0x100000000002C5C85FDF477B662B26945 >> 128;
if (x & 0x200000 > 0)
result = result * 0x10000000000162E42FEFA3AE53369388C >> 128;
if (x & 0x100000 > 0)
result = result * 0x100000000000B17217F7D1D351A389D40 >> 128;
if (x & 0x80000 > 0)
result = result * 0x10000000000058B90BFBE8E8B2D3D4EDE >> 128;
if (x & 0x40000 > 0)
result = result * 0x1000000000002C5C85FDF4741BEA6E77E >> 128;
if (x & 0x20000 > 0)
result = result * 0x100000000000162E42FEFA39FE95583C2 >> 128;
if (x & 0x10000 > 0)
result = result * 0x1000000000000B17217F7D1CFB72B45E1 >> 128;
if (x & 0x8000 > 0)
result = result * 0x100000000000058B90BFBE8E7CC35C3F0 >> 128;
if (x & 0x4000 > 0)
result = result * 0x10000000000002C5C85FDF473E242EA38 >> 128;
if (x & 0x2000 > 0)
result = result * 0x1000000000000162E42FEFA39F02B772C >> 128;
if (x & 0x1000 > 0)
result = result * 0x10000000000000B17217F7D1CF7D83C1A >> 128;
if (x & 0x800 > 0)
result = result * 0x1000000000000058B90BFBE8E7BDCBE2E >> 128;
if (x & 0x400 > 0)
result = result * 0x100000000000002C5C85FDF473DEA871F >> 128;
if (x & 0x200 > 0)
result = result * 0x10000000000000162E42FEFA39EF44D91 >> 128;
if (x & 0x100 > 0)
result = result * 0x100000000000000B17217F7D1CF79E949 >> 128;
if (x & 0x80 > 0)
result = result * 0x10000000000000058B90BFBE8E7BCE544 >> 128;
if (x & 0x40 > 0)
result = result * 0x1000000000000002C5C85FDF473DE6ECA >> 128;
if (x & 0x20 > 0)
result = result * 0x100000000000000162E42FEFA39EF366F >> 128;
if (x & 0x10 > 0)
result = result * 0x1000000000000000B17217F7D1CF79AFA >> 128;
if (x & 0x8 > 0)
result = result * 0x100000000000000058B90BFBE8E7BCD6D >> 128;
if (x & 0x4 > 0)
result = result * 0x10000000000000002C5C85FDF473DE6B2 >> 128;
if (x & 0x2 > 0)
result = result * 0x1000000000000000162E42FEFA39EF358 >> 128;
if (x & 0x1 > 0)
result = result * 0x10000000000000000B17217F7D1CF79AB >> 128;
result >>= uint256 (int256 (63 - (x >> 64)));
require (result <= uint256 (int256 (MAX_64x64)));
return int128 (int256 (result));
}
}
/**
* Calculate natural exponent of x. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function exp (int128 x) internal pure returns (int128) {
unchecked {
require (x < 0x400000000000000000); // Overflow
if (x < -0x400000000000000000) return 0; // Underflow
return exp_2 (
int128 (int256 (x) * 0x171547652B82FE1777D0FFDA0D23A7D12 >> 128));
}
}
/**
* Calculate x / y rounding towards zero, where x and y are unsigned 256-bit
* integer numbers. Revert on overflow or when y is zero.
*
* @param x unsigned 256-bit integer number
* @param y unsigned 256-bit integer number
* @return unsigned 64.64-bit fixed point number
*/
function divuu (uint256 x, uint256 y) private pure returns (uint128) {
unchecked {
require (y != 0);
uint256 result;
if (x <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
result = (x << 64) / y;
else {
uint256 msb = 192;
uint256 xc = x >> 192;
if (xc >= 0x100000000) { xc >>= 32; msb += 32; }
if (xc >= 0x10000) { xc >>= 16; msb += 16; }
if (xc >= 0x100) { xc >>= 8; msb += 8; }
if (xc >= 0x10) { xc >>= 4; msb += 4; }
if (xc >= 0x4) { xc >>= 2; msb += 2; }
if (xc >= 0x2) msb += 1; // No need to shift xc anymore
result = (x << 255 - msb) / ((y - 1 >> msb - 191) + 1);
require (result <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
uint256 hi = result * (y >> 128);
uint256 lo = result * (y & 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
uint256 xh = x >> 192;
uint256 xl = x << 64;
if (xl < lo) xh -= 1;
xl -= lo; // We rely on overflow behavior here
lo = hi << 128;
if (xl < lo) xh -= 1;
xl -= lo; // We rely on overflow behavior here
result += xh == hi >> 128 ? xl / y : 1;
}
require (result <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
return uint128 (result);
}
}
/**
* Calculate sqrt (x) rounding down, where x is unsigned 256-bit integer
* number.
*
* @param x unsigned 256-bit integer number
* @return unsigned 128-bit integer number
*/
function sqrtu (uint256 x) private pure returns (uint128) {
unchecked {
if (x == 0) return 0;
else {
uint256 xx = x;
uint256 r = 1;
if (xx >= 0x100000000000000000000000000000000) { xx >>= 128; r <<= 64; }
if (xx >= 0x10000000000000000) { xx >>= 64; r <<= 32; }
if (xx >= 0x100000000) { xx >>= 32; r <<= 16; }
if (xx >= 0x10000) { xx >>= 16; r <<= 8; }
if (xx >= 0x100) { xx >>= 8; r <<= 4; }
if (xx >= 0x10) { xx >>= 4; r <<= 2; }
if (xx >= 0x4) { r <<= 1; }
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1; // Seven iterations should be enough
uint256 r1 = x / r;
return uint128 (r < r1 ? r : r1);
}
}
}
}
// File: @openzeppelin/contracts/security/ReentrancyGuard.sol
// OpenZeppelin Contracts (last updated v4.9.0) (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
_nonReentrantBefore();
_;
_nonReentrantAfter();
}
function _nonReentrantBefore() private {
// On the first call to nonReentrant, _status will be _NOT_ENTERED
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
}
function _nonReentrantAfter() private {
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
/**
* @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
* `nonReentrant` function in the call stack.
*/
function _reentrancyGuardEntered() internal view returns (bool) {
return _status == _ENTERED;
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby disabling any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
* or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
* understand this adds an external call which potentially creates a reentrancy vulnerability.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 amount) external returns (bool);
}
// File: contracts/Proof of Play.sol
pragma solidity ^0.8.17;
interface IBattledog {
struct Player {
string name;
uint256 id;
uint256 level;
uint256 attack;
uint256 defence;
uint256 fights;
uint256 wins;
uint256 payout;
uint256 activate;
uint256 history;
}
function balanceOf(address _caller) external view returns (uint256);
function getPlayerOwners(address _user) external returns (Player[] memory);
function ownerOf(uint256 _index) external view returns (address);
function blacklisted(uint256 _index) external view returns (bool);
}
/**
* @title Proof of Play Miner contract
*/
contract ProofOfPlay is Ownable, ReentrancyGuard {
IERC20 public GAMEToken;
uint256 public totalClaimedRewards;
uint256 public multiplier = 10;
uint256 public timeLock = 604800;
uint256 private divisor = 1 ether;
address private guard;
address public battledogs;
bool public paused = false;
uint256 public activatebonus = 5;
uint256 public levelbonus = 4;
uint256 public winsbonus = 3;
uint256 public fightsbonus = 2;
uint256 public historybonus = 1;
uint256 private startTime;
// Declare the ActiveMiners & Blacklist arrays
uint256 public activeMinersLength;
mapping(uint256 => IBattledog.Player) public ActiveMiners;
mapping(uint256 => Miner) public Collectors;
mapping(uint256 => uint256) public MinerClaims;
mapping(uint256 => bool) private minerstate;
struct Miner {
string name;
uint256 id;
uint256 level;
uint256 attack;
uint256 defence;
uint256 fights;
uint256 wins;
uint256 payout;
uint256 activate;
uint256 history;
}
event RewardClaimedByMiner (address indexed user, uint256 amount);
constructor(
address _GAMEToken,
address _battledogs,
address _newGuard
) {
GAMEToken = IERC20(_GAMEToken);
battledogs = _battledogs;
guard = _newGuard;
startTime = block.timestamp;
}
using ABDKMath64x64 for uint256;
modifier onlyGuard() {
require(msg.sender == guard, "Not authorized.");
_;
}
function getMinerData() public nonReentrant {
uint256 total = IBattledog(battledogs).balanceOf(msg.sender);
IBattledog.Player[] memory players = IBattledog(battledogs).getPlayerOwners(msg.sender);
for (uint256 i = 0; i < total; i++) {
uint256 tokenId = players[i].id;
// Create a new instance of the Miner struct with the player's data
ActiveMiners[tokenId] = players[i];
// Increment the activeMinersLength
if (!minerstate[tokenId]) {
activeMinersLength++;
}
minerstate[tokenId] = true;
}
}
function getActiveMiner(uint256 index) public view returns (IBattledog.Player memory) {
require(index < activeMinersLength, "Index out of range.");
return ActiveMiners[index];
}
function getOwnerData(uint256 _tokenId) internal view returns (bool) {
// Get the token id owned by the msg.sender
address owner = IBattledog(battledogs).ownerOf(_tokenId);
// compare the _tokenId
if (owner == msg.sender) {
return true;
}
return false;
}
function mineGAME(uint256[] calldata _nfts) public nonReentrant {
// Require Contract isn't paused
require(!paused, "Paused Contract");
// Populate the ActiveMiners array
uint256 total = IBattledog(battledogs).balanceOf(msg.sender);
IBattledog.Player[] memory players = IBattledog(battledogs).getPlayerOwners(msg.sender);
for (uint256 i = 0; i < total; i++) {
uint256 tokenId = players[i].id;
// Create a new instance of the Miner struct with the player's data
ActiveMiners[tokenId] = players[i];
// Increment the activeMinersLength
if (!minerstate[tokenId]) {
activeMinersLength++;
minerstate[tokenId] = true;
}
}
for (uint256 a = 0; a < _nfts.length; a++) {
uint256 tokenId = _nfts[a]; // // Current NFT id
// Require Token Ownership
require(getOwnerData(tokenId), "Not Owner");
// Require Miner hasn't claimed within timelock
uint256 unlock = MinerClaims[tokenId] + timeLock;
uint256 currentTime = block.timestamp;
require(unlock < currentTime, "Timelocked");
// Require Miner is not on blacklist
require(!IBattledog(battledogs).blacklisted(tokenId), "NFT Blacklisted");
// Check if the miner is activated
if (ActiveMiners[tokenId].activate > 0) {
uint256 freq; uint256 activatefactor; uint256 activate; uint256 level;
uint256 fights; uint256 wins; uint256 history; uint256 rewards;
// Calculate Rewards
if (MinerClaims[tokenId] > 0) {
freq = (currentTime - MinerClaims[tokenId]) / timeLock;
} else if (((currentTime - startTime) / timeLock) < 0) {
freq = 1;
} else {
freq = ((currentTime - startTime) / timeLock);
}
activatefactor = (ActiveMiners[tokenId].activate - 1) * activatebonus;
activate = ((ActiveMiners[tokenId].activate - 1)) * multiplier * freq;
level = ((ActiveMiners[tokenId].level - Collectors[tokenId].level) * levelbonus) + activatefactor;
if (ActiveMiners[tokenId].fights > Collectors[tokenId].fights) {
fights = ((ActiveMiners[tokenId].fights - Collectors[tokenId].fights) * fightsbonus) + activatefactor;
}
if (ActiveMiners[tokenId].wins > Collectors[tokenId].wins) {
wins = ((ActiveMiners[tokenId].wins - Collectors[tokenId].wins) * winsbonus) + activatefactor;
}
history = ((ActiveMiners[tokenId].history - Collectors[tokenId].history) * historybonus) + activatefactor;
rewards = (activate + level + fights + wins + history) * divisor;
// Check the contract for adequate withdrawal balance
require(GAMEToken.balanceOf(address(this)) > rewards, "Not Enough Reserves");
// Transfer the rewards amount to the miner
require(GAMEToken.transfer(msg.sender, rewards), "Failed Transfer");
// Register claim
getCollectors(tokenId);
// Register claim timestamp
MinerClaims[tokenId] = currentTime; // Record the miner's claim timestamp
// TotalClaimedRewards
totalClaimedRewards += rewards;
// Emit event
emit RewardClaimedByMiner(msg.sender, rewards);
} else {
require(ActiveMiners[tokenId].activate > 0, "ActivateUp Required");
}
}
}
function getCollectors(uint256 _tokenId) internal {
// Read the miner data from the ActiveMiners mapping
IBattledog.Player memory activeMiner = ActiveMiners[_tokenId];
// Transfer the miner data to the Collectors mapping
Collectors[_tokenId] = Miner(
activeMiner.name,
activeMiner.id,
activeMiner.level,
activeMiner.attack,
activeMiner.defence,
activeMiner.fights,
activeMiner.wins,
activeMiner.payout,
activeMiner.activate,
activeMiner.history
);
}
function setCollectors (string memory _name, uint256 _id, uint256 _level,
uint256 _attack, uint256 _defence, uint256 _fights, uint256 _wins,
uint256 _payout, uint256 _activate, uint256 _history, uint256 _time) external onlyOwner nonReentrant {
Collectors[_id] = Miner(
_name,
_id,
_level,
_attack,
_defence,
_fights,
_wins,
_payout,
_activate,
_history
);
MinerClaims[_id] = _time; // Record the miner's claim timestamp
}
function setTimeLock(uint256 _seconds) external onlyOwner {
timeLock = _seconds;
}
function setMultiplier (uint256 _multiples) external onlyOwner() {
multiplier = _multiples;
}
function setTime(uint256 _time) external onlyOwner {
startTime = _time;
}
function setBonuses (uint256 _activate, uint256 _level, uint256 _wins, uint256 _fights, uint256 _history) external onlyOwner() {
activatebonus = _activate;
levelbonus = _level;
winsbonus = _wins;
fightsbonus = _fights;
historybonus = _history;
}
function setGuard (address _newGuard) external onlyGuard {
guard = _newGuard;
}
function setBattledog (address _battledog) external onlyGuard {
battledogs = _battledog;
}
function setGametoken (address _gametoken) external onlyGuard {
GAMEToken = IERC20(_gametoken);
}
function withdrawERC20(IERC20 _paytoken, uint256 _amount) external payable onlyOwner {
IERC20 paytoken = _paytoken;
paytoken.transfer(msg.sender, _amount);
}
event Pause();
function pause() public onlyGuard {
require(!paused, "Contract already paused.");
paused = true;
emit Pause();
}
event Unpause();
function unpause() public onlyGuard {
require(paused, "Contract not paused.");
paused = false;
emit Unpause();
}
}