Contract Name:
SanikMessageReceiver
Contract Source Code:
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.22;
import {OApp, Origin, MessagingFee} from "@layerzerolabs/oapp-evm/contracts/oapp/OApp.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {ISanikMessageReceiver} from "src/interfaces/ISanikMessageReceiver.sol";
contract SanikMessageReceiver is ISanikMessageReceiver, OApp {
/// @notice shedew address
IERC20 public immutable SHEDEW;
/// @inheritdoc ISanikMessageReceiver
mapping(address => uint256) public userToMigrated;
/// @inheritdoc ISanikMessageReceiver
mapping(address => uint256) public userToMigratedTotal;
constructor(address _endpoint, address _owner, address _shedew) OApp(_endpoint, _owner) Ownable(_owner) {
SHEDEW = IERC20(_shedew);
}
/// @inheritdoc ISanikMessageReceiver
function process() external {
/// @dev grab claimable from mapping
uint256 claimable = userToMigrated[msg.sender];
/// @dev ensure we have
require(claimable != 0, "no allocation");
/// @dev decrement
userToMigrated[msg.sender] -= claimable;
/// @dev proper conversion calculated
uint256 convertedClaimable = ((claimable * 100) / 10_000);
/// @dev send shedew to caller
SHEDEW.transfer(msg.sender, convertedClaimable);
emit SanikClaimedFromFantom(msg.sender, convertedClaimable);
}
function collect(address _to) external onlyOwner {
SHEDEW.transfer(_to, SHEDEW.balanceOf(address(this)));
}
/**
* @dev Called when data is received from the protocol. It overrides the equivalent function in the parent contract.
* Protocol messages are defined as packets, comprised of the following parameters.
* @param _origin A struct containing information about where the packet came from.
* @param _guid A global unique identifier for tracking the packet.
* @param payload Encoded message.
*/
function _lzReceive(
Origin calldata _origin,
bytes32 _guid,
bytes calldata payload,
address, // Executor address as specified by the OApp.
bytes calldata // Any extra data or options to trigger on receipt.
) internal override {
// add source validation
/// @dev decode the payload to get the message
LocalParameters memory data = abi.decode(payload, (LocalParameters));
/// @dev sanity check for message being decoded
if (data.amountMigrated > 0 && data.user != address(0)) {
/// @dev add to migration mapping
userToMigrated[data.user] += data.amountMigrated;
/// @dev add to stored mapping
userToMigratedTotal[data.user] += data.amountMigrated;
return;
} else {
/// @dev terminate or handle non-operating
return;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
// @dev Import the 'MessagingFee' and 'MessagingReceipt' so it's exposed to OApp implementers
// solhint-disable-next-line no-unused-import
import { OAppSender, MessagingFee, MessagingReceipt } from "./OAppSender.sol";
// @dev Import the 'Origin' so it's exposed to OApp implementers
// solhint-disable-next-line no-unused-import
import { OAppReceiver, Origin } from "./OAppReceiver.sol";
import { OAppCore } from "./OAppCore.sol";
/**
* @title OApp
* @dev Abstract contract serving as the base for OApp implementation, combining OAppSender and OAppReceiver functionality.
*/
abstract contract OApp is OAppSender, OAppReceiver {
/**
* @dev Constructor to initialize the OApp with the provided endpoint and owner.
* @param _endpoint The address of the LOCAL LayerZero endpoint.
* @param _delegate The delegate capable of making OApp configurations inside of the endpoint.
*/
constructor(address _endpoint, address _delegate) OAppCore(_endpoint, _delegate) {}
/**
* @notice Retrieves the OApp version information.
* @return senderVersion The version of the OAppSender.sol implementation.
* @return receiverVersion The version of the OAppReceiver.sol implementation.
*/
function oAppVersion()
public
pure
virtual
override(OAppSender, OAppReceiver)
returns (uint64 senderVersion, uint64 receiverVersion)
{
return (SENDER_VERSION, RECEIVER_VERSION);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)
pragma solidity ^0.8.20;
import {Context} from "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* The initial owner is set to the address provided by the deployer. This can
* later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
/**
* @dev The caller account is not authorized to perform an operation.
*/
error OwnableUnauthorizedAccount(address account);
/**
* @dev The owner is not a valid owner account. (eg. `address(0)`)
*/
error OwnableInvalidOwner(address owner);
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the address provided by the deployer as the initial owner.
*/
constructor(address initialOwner) {
if (initialOwner == address(0)) {
revert OwnableInvalidOwner(address(0));
}
_transferOwnership(initialOwner);
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
if (owner() != _msgSender()) {
revert OwnableUnauthorizedAccount(_msgSender());
}
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby disabling any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
if (newOwner == address(0)) {
revert OwnableInvalidOwner(address(0));
}
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.20;
/**
* @dev Interface of the ERC-20 standard as defined in the ERC.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the value of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the value of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves a `value` amount of tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 value) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets a `value` amount of tokens as the allowance of `spender` over the
* caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 value) external returns (bool);
/**
* @dev Moves a `value` amount of tokens from `from` to `to` using the
* allowance mechanism. `value` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 value) external returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.26;
interface ISanikMessageReceiver {
/// @dev parameters of the x-chain msg
struct LocalParameters {
address user;
uint256 amountMigrated;
}
event SanikClaimedFromFantom(address,uint256);
/// @dev the user mapping on the recipient
function userToMigrated(address) external view returns (uint256);
/// @dev the user mapping on the recipient
function userToMigratedTotal(address) external view returns (uint256);
function process() external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { SafeERC20, IERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { MessagingParams, MessagingFee, MessagingReceipt } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol";
import { OAppCore } from "./OAppCore.sol";
/**
* @title OAppSender
* @dev Abstract contract implementing the OAppSender functionality for sending messages to a LayerZero endpoint.
*/
abstract contract OAppSender is OAppCore {
using SafeERC20 for IERC20;
// Custom error messages
error NotEnoughNative(uint256 msgValue);
error LzTokenUnavailable();
// @dev The version of the OAppSender implementation.
// @dev Version is bumped when changes are made to this contract.
uint64 internal constant SENDER_VERSION = 1;
/**
* @notice Retrieves the OApp version information.
* @return senderVersion The version of the OAppSender.sol contract.
* @return receiverVersion The version of the OAppReceiver.sol contract.
*
* @dev Providing 0 as the default for OAppReceiver version. Indicates that the OAppReceiver is not implemented.
* ie. this is a SEND only OApp.
* @dev If the OApp uses both OAppSender and OAppReceiver, then this needs to be override returning the correct versions
*/
function oAppVersion() public view virtual returns (uint64 senderVersion, uint64 receiverVersion) {
return (SENDER_VERSION, 0);
}
/**
* @dev Internal function to interact with the LayerZero EndpointV2.quote() for fee calculation.
* @param _dstEid The destination endpoint ID.
* @param _message The message payload.
* @param _options Additional options for the message.
* @param _payInLzToken Flag indicating whether to pay the fee in LZ tokens.
* @return fee The calculated MessagingFee for the message.
* - nativeFee: The native fee for the message.
* - lzTokenFee: The LZ token fee for the message.
*/
function _quote(
uint32 _dstEid,
bytes memory _message,
bytes memory _options,
bool _payInLzToken
) internal view virtual returns (MessagingFee memory fee) {
return
endpoint.quote(
MessagingParams(_dstEid, _getPeerOrRevert(_dstEid), _message, _options, _payInLzToken),
address(this)
);
}
/**
* @dev Internal function to interact with the LayerZero EndpointV2.send() for sending a message.
* @param _dstEid The destination endpoint ID.
* @param _message The message payload.
* @param _options Additional options for the message.
* @param _fee The calculated LayerZero fee for the message.
* - nativeFee: The native fee.
* - lzTokenFee: The lzToken fee.
* @param _refundAddress The address to receive any excess fee values sent to the endpoint.
* @return receipt The receipt for the sent message.
* - guid: The unique identifier for the sent message.
* - nonce: The nonce of the sent message.
* - fee: The LayerZero fee incurred for the message.
*/
function _lzSend(
uint32 _dstEid,
bytes memory _message,
bytes memory _options,
MessagingFee memory _fee,
address _refundAddress
) internal virtual returns (MessagingReceipt memory receipt) {
// @dev Push corresponding fees to the endpoint, any excess is sent back to the _refundAddress from the endpoint.
uint256 messageValue = _payNative(_fee.nativeFee);
if (_fee.lzTokenFee > 0) _payLzToken(_fee.lzTokenFee);
return
// solhint-disable-next-line check-send-result
endpoint.send{ value: messageValue }(
MessagingParams(_dstEid, _getPeerOrRevert(_dstEid), _message, _options, _fee.lzTokenFee > 0),
_refundAddress
);
}
/**
* @dev Internal function to pay the native fee associated with the message.
* @param _nativeFee The native fee to be paid.
* @return nativeFee The amount of native currency paid.
*
* @dev If the OApp needs to initiate MULTIPLE LayerZero messages in a single transaction,
* this will need to be overridden because msg.value would contain multiple lzFees.
* @dev Should be overridden in the event the LayerZero endpoint requires a different native currency.
* @dev Some EVMs use an ERC20 as a method for paying transactions/gasFees.
* @dev The endpoint is EITHER/OR, ie. it will NOT support both types of native payment at a time.
*/
function _payNative(uint256 _nativeFee) internal virtual returns (uint256 nativeFee) {
if (msg.value != _nativeFee) revert NotEnoughNative(msg.value);
return _nativeFee;
}
/**
* @dev Internal function to pay the LZ token fee associated with the message.
* @param _lzTokenFee The LZ token fee to be paid.
*
* @dev If the caller is trying to pay in the specified lzToken, then the lzTokenFee is passed to the endpoint.
* @dev Any excess sent, is passed back to the specified _refundAddress in the _lzSend().
*/
function _payLzToken(uint256 _lzTokenFee) internal virtual {
// @dev Cannot cache the token because it is not immutable in the endpoint.
address lzToken = endpoint.lzToken();
if (lzToken == address(0)) revert LzTokenUnavailable();
// Pay LZ token fee by sending tokens to the endpoint.
IERC20(lzToken).safeTransferFrom(msg.sender, address(endpoint), _lzTokenFee);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { IOAppReceiver, Origin } from "./interfaces/IOAppReceiver.sol";
import { OAppCore } from "./OAppCore.sol";
/**
* @title OAppReceiver
* @dev Abstract contract implementing the ILayerZeroReceiver interface and extending OAppCore for OApp receivers.
*/
abstract contract OAppReceiver is IOAppReceiver, OAppCore {
// Custom error message for when the caller is not the registered endpoint/
error OnlyEndpoint(address addr);
// @dev The version of the OAppReceiver implementation.
// @dev Version is bumped when changes are made to this contract.
uint64 internal constant RECEIVER_VERSION = 2;
/**
* @notice Retrieves the OApp version information.
* @return senderVersion The version of the OAppSender.sol contract.
* @return receiverVersion The version of the OAppReceiver.sol contract.
*
* @dev Providing 0 as the default for OAppSender version. Indicates that the OAppSender is not implemented.
* ie. this is a RECEIVE only OApp.
* @dev If the OApp uses both OAppSender and OAppReceiver, then this needs to be override returning the correct versions.
*/
function oAppVersion() public view virtual returns (uint64 senderVersion, uint64 receiverVersion) {
return (0, RECEIVER_VERSION);
}
/**
* @notice Indicates whether an address is an approved composeMsg sender to the Endpoint.
* @dev _origin The origin information containing the source endpoint and sender address.
* - srcEid: The source chain endpoint ID.
* - sender: The sender address on the src chain.
* - nonce: The nonce of the message.
* @dev _message The lzReceive payload.
* @param _sender The sender address.
* @return isSender Is a valid sender.
*
* @dev Applications can optionally choose to implement separate composeMsg senders that are NOT the bridging layer.
* @dev The default sender IS the OAppReceiver implementer.
*/
function isComposeMsgSender(
Origin calldata /*_origin*/,
bytes calldata /*_message*/,
address _sender
) public view virtual returns (bool) {
return _sender == address(this);
}
/**
* @notice Checks if the path initialization is allowed based on the provided origin.
* @param origin The origin information containing the source endpoint and sender address.
* @return Whether the path has been initialized.
*
* @dev This indicates to the endpoint that the OApp has enabled msgs for this particular path to be received.
* @dev This defaults to assuming if a peer has been set, its initialized.
* Can be overridden by the OApp if there is other logic to determine this.
*/
function allowInitializePath(Origin calldata origin) public view virtual returns (bool) {
return peers[origin.srcEid] == origin.sender;
}
/**
* @notice Retrieves the next nonce for a given source endpoint and sender address.
* @dev _srcEid The source endpoint ID.
* @dev _sender The sender address.
* @return nonce The next nonce.
*
* @dev The path nonce starts from 1. If 0 is returned it means that there is NO nonce ordered enforcement.
* @dev Is required by the off-chain executor to determine the OApp expects msg execution is ordered.
* @dev This is also enforced by the OApp.
* @dev By default this is NOT enabled. ie. nextNonce is hardcoded to return 0.
*/
function nextNonce(uint32 /*_srcEid*/, bytes32 /*_sender*/) public view virtual returns (uint64 nonce) {
return 0;
}
/**
* @dev Entry point for receiving messages or packets from the endpoint.
* @param _origin The origin information containing the source endpoint and sender address.
* - srcEid: The source chain endpoint ID.
* - sender: The sender address on the src chain.
* - nonce: The nonce of the message.
* @param _guid The unique identifier for the received LayerZero message.
* @param _message The payload of the received message.
* @param _executor The address of the executor for the received message.
* @param _extraData Additional arbitrary data provided by the corresponding executor.
*
* @dev Entry point for receiving msg/packet from the LayerZero endpoint.
*/
function lzReceive(
Origin calldata _origin,
bytes32 _guid,
bytes calldata _message,
address _executor,
bytes calldata _extraData
) public payable virtual {
// Ensures that only the endpoint can attempt to lzReceive() messages to this OApp.
if (address(endpoint) != msg.sender) revert OnlyEndpoint(msg.sender);
// Ensure that the sender matches the expected peer for the source endpoint.
if (_getPeerOrRevert(_origin.srcEid) != _origin.sender) revert OnlyPeer(_origin.srcEid, _origin.sender);
// Call the internal OApp implementation of lzReceive.
_lzReceive(_origin, _guid, _message, _executor, _extraData);
}
/**
* @dev Internal function to implement lzReceive logic without needing to copy the basic parameter validation.
*/
function _lzReceive(
Origin calldata _origin,
bytes32 _guid,
bytes calldata _message,
address _executor,
bytes calldata _extraData
) internal virtual;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { IOAppCore, ILayerZeroEndpointV2 } from "./interfaces/IOAppCore.sol";
/**
* @title OAppCore
* @dev Abstract contract implementing the IOAppCore interface with basic OApp configurations.
*/
abstract contract OAppCore is IOAppCore, Ownable {
// The LayerZero endpoint associated with the given OApp
ILayerZeroEndpointV2 public immutable endpoint;
// Mapping to store peers associated with corresponding endpoints
mapping(uint32 eid => bytes32 peer) public peers;
/**
* @dev Constructor to initialize the OAppCore with the provided endpoint and delegate.
* @param _endpoint The address of the LOCAL Layer Zero endpoint.
* @param _delegate The delegate capable of making OApp configurations inside of the endpoint.
*
* @dev The delegate typically should be set as the owner of the contract.
*/
constructor(address _endpoint, address _delegate) {
endpoint = ILayerZeroEndpointV2(_endpoint);
if (_delegate == address(0)) revert InvalidDelegate();
endpoint.setDelegate(_delegate);
}
/**
* @notice Sets the peer address (OApp instance) for a corresponding endpoint.
* @param _eid The endpoint ID.
* @param _peer The address of the peer to be associated with the corresponding endpoint.
*
* @dev Only the owner/admin of the OApp can call this function.
* @dev Indicates that the peer is trusted to send LayerZero messages to this OApp.
* @dev Set this to bytes32(0) to remove the peer address.
* @dev Peer is a bytes32 to accommodate non-evm chains.
*/
function setPeer(uint32 _eid, bytes32 _peer) public virtual onlyOwner {
_setPeer(_eid, _peer);
}
/**
* @notice Sets the peer address (OApp instance) for a corresponding endpoint.
* @param _eid The endpoint ID.
* @param _peer The address of the peer to be associated with the corresponding endpoint.
*
* @dev Indicates that the peer is trusted to send LayerZero messages to this OApp.
* @dev Set this to bytes32(0) to remove the peer address.
* @dev Peer is a bytes32 to accommodate non-evm chains.
*/
function _setPeer(uint32 _eid, bytes32 _peer) internal virtual {
peers[_eid] = _peer;
emit PeerSet(_eid, _peer);
}
/**
* @notice Internal function to get the peer address associated with a specific endpoint; reverts if NOT set.
* ie. the peer is set to bytes32(0).
* @param _eid The endpoint ID.
* @return peer The address of the peer associated with the specified endpoint.
*/
function _getPeerOrRevert(uint32 _eid) internal view virtual returns (bytes32) {
bytes32 peer = peers[_eid];
if (peer == bytes32(0)) revert NoPeer(_eid);
return peer;
}
/**
* @notice Sets the delegate address for the OApp.
* @param _delegate The address of the delegate to be set.
*
* @dev Only the owner/admin of the OApp can call this function.
* @dev Provides the ability for a delegate to set configs, on behalf of the OApp, directly on the Endpoint contract.
*/
function setDelegate(address _delegate) public onlyOwner {
endpoint.setDelegate(_delegate);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)
pragma solidity ^0.8.20;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
function _contextSuffixLength() internal view virtual returns (uint256) {
return 0;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.20;
import {IERC20} from "../IERC20.sol";
import {IERC1363} from "../../../interfaces/IERC1363.sol";
import {Address} from "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC-20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
/**
* @dev An operation with an ERC-20 token failed.
*/
error SafeERC20FailedOperation(address token);
/**
* @dev Indicates a failed `decreaseAllowance` request.
*/
error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);
/**
* @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
}
/**
* @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
* calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
*/
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
}
/**
* @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*
* IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
* smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
* this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
* that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
*/
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 oldAllowance = token.allowance(address(this), spender);
forceApprove(token, spender, oldAllowance + value);
}
/**
* @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
* value, non-reverting calls are assumed to be successful.
*
* IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
* smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
* this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
* that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
*/
function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
unchecked {
uint256 currentAllowance = token.allowance(address(this), spender);
if (currentAllowance < requestedDecrease) {
revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
}
forceApprove(token, spender, currentAllowance - requestedDecrease);
}
}
/**
* @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
* to be set to zero before setting it to a non-zero value, such as USDT.
*
* NOTE: If the token implements ERC-7674, this function will not modify any temporary allowance. This function
* only sets the "standard" allowance. Any temporary allowance will remain active, in addition to the value being
* set here.
*/
function forceApprove(IERC20 token, address spender, uint256 value) internal {
bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));
if (!_callOptionalReturnBool(token, approvalCall)) {
_callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
_callOptionalReturn(token, approvalCall);
}
}
/**
* @dev Performs an {ERC1363} transferAndCall, with a fallback to the simple {ERC20} transfer if the target has no
* code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
* targeting contracts.
*
* Reverts if the returned value is other than `true`.
*/
function transferAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
if (to.code.length == 0) {
safeTransfer(token, to, value);
} else if (!token.transferAndCall(to, value, data)) {
revert SafeERC20FailedOperation(address(token));
}
}
/**
* @dev Performs an {ERC1363} transferFromAndCall, with a fallback to the simple {ERC20} transferFrom if the target
* has no code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
* targeting contracts.
*
* Reverts if the returned value is other than `true`.
*/
function transferFromAndCallRelaxed(
IERC1363 token,
address from,
address to,
uint256 value,
bytes memory data
) internal {
if (to.code.length == 0) {
safeTransferFrom(token, from, to, value);
} else if (!token.transferFromAndCall(from, to, value, data)) {
revert SafeERC20FailedOperation(address(token));
}
}
/**
* @dev Performs an {ERC1363} approveAndCall, with a fallback to the simple {ERC20} approve if the target has no
* code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
* targeting contracts.
*
* NOTE: When the recipient address (`to`) has no code (i.e. is an EOA), this function behaves as {forceApprove}.
* Opposedly, when the recipient address (`to`) has code, this function only attempts to call {ERC1363-approveAndCall}
* once without retrying, and relies on the returned value to be true.
*
* Reverts if the returned value is other than `true`.
*/
function approveAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
if (to.code.length == 0) {
forceApprove(token, to, value);
} else if (!token.approveAndCall(to, value, data)) {
revert SafeERC20FailedOperation(address(token));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*
* This is a variant of {_callOptionalReturnBool} that reverts if call fails to meet the requirements.
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
uint256 returnSize;
uint256 returnValue;
assembly ("memory-safe") {
let success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
// bubble errors
if iszero(success) {
let ptr := mload(0x40)
returndatacopy(ptr, 0, returndatasize())
revert(ptr, returndatasize())
}
returnSize := returndatasize()
returnValue := mload(0)
}
if (returnSize == 0 ? address(token).code.length == 0 : returnValue != 1) {
revert SafeERC20FailedOperation(address(token));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*
* This is a variant of {_callOptionalReturn} that silently catches all reverts and returns a bool instead.
*/
function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
bool success;
uint256 returnSize;
uint256 returnValue;
assembly ("memory-safe") {
success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
returnSize := returndatasize()
returnValue := mload(0)
}
return success && (returnSize == 0 ? address(token).code.length > 0 : returnValue == 1);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
import { IMessageLibManager } from "./IMessageLibManager.sol";
import { IMessagingComposer } from "./IMessagingComposer.sol";
import { IMessagingChannel } from "./IMessagingChannel.sol";
import { IMessagingContext } from "./IMessagingContext.sol";
struct MessagingParams {
uint32 dstEid;
bytes32 receiver;
bytes message;
bytes options;
bool payInLzToken;
}
struct MessagingReceipt {
bytes32 guid;
uint64 nonce;
MessagingFee fee;
}
struct MessagingFee {
uint256 nativeFee;
uint256 lzTokenFee;
}
struct Origin {
uint32 srcEid;
bytes32 sender;
uint64 nonce;
}
interface ILayerZeroEndpointV2 is IMessageLibManager, IMessagingComposer, IMessagingChannel, IMessagingContext {
event PacketSent(bytes encodedPayload, bytes options, address sendLibrary);
event PacketVerified(Origin origin, address receiver, bytes32 payloadHash);
event PacketDelivered(Origin origin, address receiver);
event LzReceiveAlert(
address indexed receiver,
address indexed executor,
Origin origin,
bytes32 guid,
uint256 gas,
uint256 value,
bytes message,
bytes extraData,
bytes reason
);
event LzTokenSet(address token);
event DelegateSet(address sender, address delegate);
function quote(MessagingParams calldata _params, address _sender) external view returns (MessagingFee memory);
function send(
MessagingParams calldata _params,
address _refundAddress
) external payable returns (MessagingReceipt memory);
function verify(Origin calldata _origin, address _receiver, bytes32 _payloadHash) external;
function verifiable(Origin calldata _origin, address _receiver) external view returns (bool);
function initializable(Origin calldata _origin, address _receiver) external view returns (bool);
function lzReceive(
Origin calldata _origin,
address _receiver,
bytes32 _guid,
bytes calldata _message,
bytes calldata _extraData
) external payable;
// oapp can burn messages partially by calling this function with its own business logic if messages are verified in order
function clear(address _oapp, Origin calldata _origin, bytes32 _guid, bytes calldata _message) external;
function setLzToken(address _lzToken) external;
function lzToken() external view returns (address);
function nativeToken() external view returns (address);
function setDelegate(address _delegate) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { ILayerZeroReceiver, Origin } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroReceiver.sol";
interface IOAppReceiver is ILayerZeroReceiver {
/**
* @notice Indicates whether an address is an approved composeMsg sender to the Endpoint.
* @param _origin The origin information containing the source endpoint and sender address.
* - srcEid: The source chain endpoint ID.
* - sender: The sender address on the src chain.
* - nonce: The nonce of the message.
* @param _message The lzReceive payload.
* @param _sender The sender address.
* @return isSender Is a valid sender.
*
* @dev Applications can optionally choose to implement a separate composeMsg sender that is NOT the bridging layer.
* @dev The default sender IS the OAppReceiver implementer.
*/
function isComposeMsgSender(
Origin calldata _origin,
bytes calldata _message,
address _sender
) external view returns (bool isSender);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { ILayerZeroEndpointV2 } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol";
/**
* @title IOAppCore
*/
interface IOAppCore {
// Custom error messages
error OnlyPeer(uint32 eid, bytes32 sender);
error NoPeer(uint32 eid);
error InvalidEndpointCall();
error InvalidDelegate();
// Event emitted when a peer (OApp) is set for a corresponding endpoint
event PeerSet(uint32 eid, bytes32 peer);
/**
* @notice Retrieves the OApp version information.
* @return senderVersion The version of the OAppSender.sol contract.
* @return receiverVersion The version of the OAppReceiver.sol contract.
*/
function oAppVersion() external view returns (uint64 senderVersion, uint64 receiverVersion);
/**
* @notice Retrieves the LayerZero endpoint associated with the OApp.
* @return iEndpoint The LayerZero endpoint as an interface.
*/
function endpoint() external view returns (ILayerZeroEndpointV2 iEndpoint);
/**
* @notice Retrieves the peer (OApp) associated with a corresponding endpoint.
* @param _eid The endpoint ID.
* @return peer The peer address (OApp instance) associated with the corresponding endpoint.
*/
function peers(uint32 _eid) external view returns (bytes32 peer);
/**
* @notice Sets the peer address (OApp instance) for a corresponding endpoint.
* @param _eid The endpoint ID.
* @param _peer The address of the peer to be associated with the corresponding endpoint.
*/
function setPeer(uint32 _eid, bytes32 _peer) external;
/**
* @notice Sets the delegate address for the OApp Core.
* @param _delegate The address of the delegate to be set.
*/
function setDelegate(address _delegate) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (interfaces/IERC1363.sol)
pragma solidity ^0.8.20;
import {IERC20} from "./IERC20.sol";
import {IERC165} from "./IERC165.sol";
/**
* @title IERC1363
* @dev Interface of the ERC-1363 standard as defined in the https://eips.ethereum.org/EIPS/eip-1363[ERC-1363].
*
* Defines an extension interface for ERC-20 tokens that supports executing code on a recipient contract
* after `transfer` or `transferFrom`, or code on a spender contract after `approve`, in a single transaction.
*/
interface IERC1363 is IERC20, IERC165 {
/*
* Note: the ERC-165 identifier for this interface is 0xb0202a11.
* 0xb0202a11 ===
* bytes4(keccak256('transferAndCall(address,uint256)')) ^
* bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^
* bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^
* bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)')) ^
* bytes4(keccak256('approveAndCall(address,uint256)')) ^
* bytes4(keccak256('approveAndCall(address,uint256,bytes)'))
*/
/**
* @dev Moves a `value` amount of tokens from the caller's account to `to`
* and then calls {IERC1363Receiver-onTransferReceived} on `to`.
* @param to The address which you want to transfer to.
* @param value The amount of tokens to be transferred.
* @return A boolean value indicating whether the operation succeeded unless throwing.
*/
function transferAndCall(address to, uint256 value) external returns (bool);
/**
* @dev Moves a `value` amount of tokens from the caller's account to `to`
* and then calls {IERC1363Receiver-onTransferReceived} on `to`.
* @param to The address which you want to transfer to.
* @param value The amount of tokens to be transferred.
* @param data Additional data with no specified format, sent in call to `to`.
* @return A boolean value indicating whether the operation succeeded unless throwing.
*/
function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool);
/**
* @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
* and then calls {IERC1363Receiver-onTransferReceived} on `to`.
* @param from The address which you want to send tokens from.
* @param to The address which you want to transfer to.
* @param value The amount of tokens to be transferred.
* @return A boolean value indicating whether the operation succeeded unless throwing.
*/
function transferFromAndCall(address from, address to, uint256 value) external returns (bool);
/**
* @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
* and then calls {IERC1363Receiver-onTransferReceived} on `to`.
* @param from The address which you want to send tokens from.
* @param to The address which you want to transfer to.
* @param value The amount of tokens to be transferred.
* @param data Additional data with no specified format, sent in call to `to`.
* @return A boolean value indicating whether the operation succeeded unless throwing.
*/
function transferFromAndCall(address from, address to, uint256 value, bytes calldata data) external returns (bool);
/**
* @dev Sets a `value` amount of tokens as the allowance of `spender` over the
* caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
* @param spender The address which will spend the funds.
* @param value The amount of tokens to be spent.
* @return A boolean value indicating whether the operation succeeded unless throwing.
*/
function approveAndCall(address spender, uint256 value) external returns (bool);
/**
* @dev Sets a `value` amount of tokens as the allowance of `spender` over the
* caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
* @param spender The address which will spend the funds.
* @param value The amount of tokens to be spent.
* @param data Additional data with no specified format, sent in call to `spender`.
* @return A boolean value indicating whether the operation succeeded unless throwing.
*/
function approveAndCall(address spender, uint256 value, bytes calldata data) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/Address.sol)
pragma solidity ^0.8.20;
import {Errors} from "./Errors.sol";
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev There's no code at `target` (it is not a contract).
*/
error AddressEmptyCode(address target);
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
if (address(this).balance < amount) {
revert Errors.InsufficientBalance(address(this).balance, amount);
}
(bool success, ) = recipient.call{value: amount}("");
if (!success) {
revert Errors.FailedCall();
}
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason or custom error, it is bubbled
* up by this function (like regular Solidity function calls). However, if
* the call reverted with no returned reason, this function reverts with a
* {Errors.FailedCall} error.
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
if (address(this).balance < value) {
revert Errors.InsufficientBalance(address(this).balance, value);
}
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
* was not a contract or bubbling up the revert reason (falling back to {Errors.FailedCall}) in case
* of an unsuccessful call.
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata
) internal view returns (bytes memory) {
if (!success) {
_revert(returndata);
} else {
// only check if target is a contract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
if (returndata.length == 0 && target.code.length == 0) {
revert AddressEmptyCode(target);
}
return returndata;
}
}
/**
* @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
* revert reason or with a default {Errors.FailedCall} error.
*/
function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
if (!success) {
_revert(returndata);
} else {
return returndata;
}
}
/**
* @dev Reverts with returndata if present. Otherwise reverts with {Errors.FailedCall}.
*/
function _revert(bytes memory returndata) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly ("memory-safe") {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert Errors.FailedCall();
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
struct SetConfigParam {
uint32 eid;
uint32 configType;
bytes config;
}
interface IMessageLibManager {
struct Timeout {
address lib;
uint256 expiry;
}
event LibraryRegistered(address newLib);
event DefaultSendLibrarySet(uint32 eid, address newLib);
event DefaultReceiveLibrarySet(uint32 eid, address newLib);
event DefaultReceiveLibraryTimeoutSet(uint32 eid, address oldLib, uint256 expiry);
event SendLibrarySet(address sender, uint32 eid, address newLib);
event ReceiveLibrarySet(address receiver, uint32 eid, address newLib);
event ReceiveLibraryTimeoutSet(address receiver, uint32 eid, address oldLib, uint256 timeout);
function registerLibrary(address _lib) external;
function isRegisteredLibrary(address _lib) external view returns (bool);
function getRegisteredLibraries() external view returns (address[] memory);
function setDefaultSendLibrary(uint32 _eid, address _newLib) external;
function defaultSendLibrary(uint32 _eid) external view returns (address);
function setDefaultReceiveLibrary(uint32 _eid, address _newLib, uint256 _gracePeriod) external;
function defaultReceiveLibrary(uint32 _eid) external view returns (address);
function setDefaultReceiveLibraryTimeout(uint32 _eid, address _lib, uint256 _expiry) external;
function defaultReceiveLibraryTimeout(uint32 _eid) external view returns (address lib, uint256 expiry);
function isSupportedEid(uint32 _eid) external view returns (bool);
function isValidReceiveLibrary(address _receiver, uint32 _eid, address _lib) external view returns (bool);
/// ------------------- OApp interfaces -------------------
function setSendLibrary(address _oapp, uint32 _eid, address _newLib) external;
function getSendLibrary(address _sender, uint32 _eid) external view returns (address lib);
function isDefaultSendLibrary(address _sender, uint32 _eid) external view returns (bool);
function setReceiveLibrary(address _oapp, uint32 _eid, address _newLib, uint256 _gracePeriod) external;
function getReceiveLibrary(address _receiver, uint32 _eid) external view returns (address lib, bool isDefault);
function setReceiveLibraryTimeout(address _oapp, uint32 _eid, address _lib, uint256 _expiry) external;
function receiveLibraryTimeout(address _receiver, uint32 _eid) external view returns (address lib, uint256 expiry);
function setConfig(address _oapp, address _lib, SetConfigParam[] calldata _params) external;
function getConfig(
address _oapp,
address _lib,
uint32 _eid,
uint32 _configType
) external view returns (bytes memory config);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
interface IMessagingComposer {
event ComposeSent(address from, address to, bytes32 guid, uint16 index, bytes message);
event ComposeDelivered(address from, address to, bytes32 guid, uint16 index);
event LzComposeAlert(
address indexed from,
address indexed to,
address indexed executor,
bytes32 guid,
uint16 index,
uint256 gas,
uint256 value,
bytes message,
bytes extraData,
bytes reason
);
function composeQueue(
address _from,
address _to,
bytes32 _guid,
uint16 _index
) external view returns (bytes32 messageHash);
function sendCompose(address _to, bytes32 _guid, uint16 _index, bytes calldata _message) external;
function lzCompose(
address _from,
address _to,
bytes32 _guid,
uint16 _index,
bytes calldata _message,
bytes calldata _extraData
) external payable;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
interface IMessagingChannel {
event InboundNonceSkipped(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce);
event PacketNilified(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce, bytes32 payloadHash);
event PacketBurnt(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce, bytes32 payloadHash);
function eid() external view returns (uint32);
// this is an emergency function if a message cannot be verified for some reasons
// required to provide _nextNonce to avoid race condition
function skip(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce) external;
function nilify(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce, bytes32 _payloadHash) external;
function burn(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce, bytes32 _payloadHash) external;
function nextGuid(address _sender, uint32 _dstEid, bytes32 _receiver) external view returns (bytes32);
function inboundNonce(address _receiver, uint32 _srcEid, bytes32 _sender) external view returns (uint64);
function outboundNonce(address _sender, uint32 _dstEid, bytes32 _receiver) external view returns (uint64);
function inboundPayloadHash(
address _receiver,
uint32 _srcEid,
bytes32 _sender,
uint64 _nonce
) external view returns (bytes32);
function lazyInboundNonce(address _receiver, uint32 _srcEid, bytes32 _sender) external view returns (uint64);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
interface IMessagingContext {
function isSendingMessage() external view returns (bool);
function getSendContext() external view returns (uint32 dstEid, address sender);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
import { Origin } from "./ILayerZeroEndpointV2.sol";
interface ILayerZeroReceiver {
function allowInitializePath(Origin calldata _origin) external view returns (bool);
function nextNonce(uint32 _eid, bytes32 _sender) external view returns (uint64);
function lzReceive(
Origin calldata _origin,
bytes32 _guid,
bytes calldata _message,
address _executor,
bytes calldata _extraData
) external payable;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC20.sol)
pragma solidity ^0.8.20;
import {IERC20} from "../token/ERC20/IERC20.sol";
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC165.sol)
pragma solidity ^0.8.20;
import {IERC165} from "../utils/introspection/IERC165.sol";
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/Errors.sol)
pragma solidity ^0.8.20;
/**
* @dev Collection of common custom errors used in multiple contracts
*
* IMPORTANT: Backwards compatibility is not guaranteed in future versions of the library.
* It is recommended to avoid relying on the error API for critical functionality.
*
* _Available since v5.1._
*/
library Errors {
/**
* @dev The ETH balance of the account is not enough to perform the operation.
*/
error InsufficientBalance(uint256 balance, uint256 needed);
/**
* @dev A call to an address target failed. The target may have reverted.
*/
error FailedCall();
/**
* @dev The deployment failed.
*/
error FailedDeployment();
/**
* @dev A necessary precompile is missing.
*/
error MissingPrecompile(address);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/introspection/IERC165.sol)
pragma solidity ^0.8.20;
/**
* @dev Interface of the ERC-165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[ERC].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[ERC section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}