Contract Name:
ChipsIntentsVerifierV1
Contract Source Code:
// SPDX-License-Identifier: LZBL-1.2
pragma solidity ^0.8.20;
import { BytesLib } from "solidity-bytes-utils/contracts/BytesLib.sol";
import { BitMap256 } from "@layerzerolabs/lz-evm-protocol-v2/contracts/messagelib/libs/BitMaps.sol";
import { CalldataBytesLib } from "@layerzerolabs/lz-evm-protocol-v2/contracts/libs/CalldataBytesLib.sol";
library DVNOptions {
using CalldataBytesLib for bytes;
using BytesLib for bytes;
uint8 internal constant WORKER_ID = 2;
uint8 internal constant OPTION_TYPE_PRECRIME = 1;
error DVN_InvalidDVNIdx();
error DVN_InvalidDVNOptions(uint256 cursor);
/// @dev group dvn options by its idx
/// @param _options [dvn_id][dvn_option][dvn_id][dvn_option]...
/// dvn_option = [option_size][dvn_idx][option_type][option]
/// option_size = len(dvn_idx) + len(option_type) + len(option)
/// dvn_id: uint8, dvn_idx: uint8, option_size: uint16, option_type: uint8, option: bytes
/// @return dvnOptions the grouped options, still share the same format of _options
/// @return dvnIndices the dvn indices
function groupDVNOptionsByIdx(
bytes memory _options
) internal pure returns (bytes[] memory dvnOptions, uint8[] memory dvnIndices) {
if (_options.length == 0) return (dvnOptions, dvnIndices);
uint8 numDVNs = getNumDVNs(_options);
// if there is only 1 dvn, we can just return the whole options
if (numDVNs == 1) {
dvnOptions = new bytes[](1);
dvnOptions[0] = _options;
dvnIndices = new uint8[](1);
dvnIndices[0] = _options.toUint8(3); // dvn idx
return (dvnOptions, dvnIndices);
}
// otherwise, we need to group the options by dvn_idx
dvnIndices = new uint8[](numDVNs);
dvnOptions = new bytes[](numDVNs);
unchecked {
uint256 cursor = 0;
uint256 start = 0;
uint8 lastDVNIdx = 255; // 255 is an invalid dvn_idx
while (cursor < _options.length) {
++cursor; // skip worker_id
// optionLength asserted in getNumDVNs (skip check)
uint16 optionLength = _options.toUint16(cursor);
cursor += 2;
// dvnIdx asserted in getNumDVNs (skip check)
uint8 dvnIdx = _options.toUint8(cursor);
// dvnIdx must equal to the lastDVNIdx for the first option
// so it is always skipped in the first option
// this operation slices out options whenever the scan finds a different lastDVNIdx
if (lastDVNIdx == 255) {
lastDVNIdx = dvnIdx;
} else if (dvnIdx != lastDVNIdx) {
uint256 len = cursor - start - 3; // 3 is for worker_id and option_length
bytes memory opt = _options.slice(start, len);
_insertDVNOptions(dvnOptions, dvnIndices, lastDVNIdx, opt);
// reset the start and lastDVNIdx
start += len;
lastDVNIdx = dvnIdx;
}
cursor += optionLength;
}
// skip check the cursor here because the cursor is asserted in getNumDVNs
// if we have reached the end of the options, we need to process the last dvn
uint256 size = cursor - start;
bytes memory op = _options.slice(start, size);
_insertDVNOptions(dvnOptions, dvnIndices, lastDVNIdx, op);
// revert dvnIndices to start from 0
for (uint8 i = 0; i < numDVNs; ++i) {
--dvnIndices[i];
}
}
}
function _insertDVNOptions(
bytes[] memory _dvnOptions,
uint8[] memory _dvnIndices,
uint8 _dvnIdx,
bytes memory _newOptions
) internal pure {
// dvnIdx starts from 0 but default value of dvnIndices is 0,
// so we tell if the slot is empty by adding 1 to dvnIdx
if (_dvnIdx == 255) revert DVN_InvalidDVNIdx();
uint8 dvnIdxAdj = _dvnIdx + 1;
for (uint256 j = 0; j < _dvnIndices.length; ++j) {
uint8 index = _dvnIndices[j];
if (dvnIdxAdj == index) {
_dvnOptions[j] = abi.encodePacked(_dvnOptions[j], _newOptions);
break;
} else if (index == 0) {
// empty slot, that means it is the first time we see this dvn
_dvnIndices[j] = dvnIdxAdj;
_dvnOptions[j] = _newOptions;
break;
}
}
}
/// @dev get the number of unique dvns
/// @param _options the format is the same as groupDVNOptionsByIdx
function getNumDVNs(bytes memory _options) internal pure returns (uint8 numDVNs) {
uint256 cursor = 0;
BitMap256 bitmap;
// find number of unique dvn_idx
unchecked {
while (cursor < _options.length) {
++cursor; // skip worker_id
uint16 optionLength = _options.toUint16(cursor);
cursor += 2;
if (optionLength < 2) revert DVN_InvalidDVNOptions(cursor); // at least 1 byte for dvn_idx and 1 byte for option_type
uint8 dvnIdx = _options.toUint8(cursor);
// if dvnIdx is not set, increment numDVNs
// max num of dvns is 255, 255 is an invalid dvn_idx
// The order of the dvnIdx is not required to be sequential, as enforcing the order may weaken
// the composability of the options. e.g. if we refrain from enforcing the order, an OApp that has
// already enforced certain options can append additional options to the end of the enforced
// ones without restrictions.
if (dvnIdx == 255) revert DVN_InvalidDVNIdx();
if (!bitmap.get(dvnIdx)) {
++numDVNs;
bitmap = bitmap.set(dvnIdx);
}
cursor += optionLength;
}
}
if (cursor != _options.length) revert DVN_InvalidDVNOptions(cursor);
}
/// @dev decode the next dvn option from _options starting from the specified cursor
/// @param _options the format is the same as groupDVNOptionsByIdx
/// @param _cursor the cursor to start decoding
/// @return optionType the type of the option
/// @return option the option
/// @return cursor the cursor to start decoding the next option
function nextDVNOption(
bytes calldata _options,
uint256 _cursor
) internal pure returns (uint8 optionType, bytes calldata option, uint256 cursor) {
unchecked {
// skip worker id
cursor = _cursor + 1;
// read option size
uint16 size = _options.toU16(cursor);
cursor += 2;
// read option type
optionType = _options.toU8(cursor + 1); // skip dvn_idx
// startCursor and endCursor are used to slice the option from _options
uint256 startCursor = cursor + 2; // skip option type and dvn_idx
uint256 endCursor = cursor + size;
option = _options[startCursor:endCursor];
cursor += size;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { ILayerZeroComposer } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroComposer.sol";
/**
* @title IOAppComposer
* @dev This interface defines the OApp Composer, allowing developers to inherit only the OApp package without the protocol.
*/
// solhint-disable-next-line no-empty-blocks
interface IOAppComposer is ILayerZeroComposer {}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { ILayerZeroEndpointV2 } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol";
/**
* @title IOAppCore
*/
interface IOAppCore {
// Custom error messages
error OnlyPeer(uint32 eid, bytes32 sender);
error NoPeer(uint32 eid);
error InvalidEndpointCall();
error InvalidDelegate();
// Event emitted when a peer (OApp) is set for a corresponding endpoint
event PeerSet(uint32 eid, bytes32 peer);
/**
* @notice Retrieves the OApp version information.
* @return senderVersion The version of the OAppSender.sol contract.
* @return receiverVersion The version of the OAppReceiver.sol contract.
*/
function oAppVersion() external view returns (uint64 senderVersion, uint64 receiverVersion);
/**
* @notice Retrieves the LayerZero endpoint associated with the OApp.
* @return iEndpoint The LayerZero endpoint as an interface.
*/
function endpoint() external view returns (ILayerZeroEndpointV2 iEndpoint);
/**
* @notice Retrieves the peer (OApp) associated with a corresponding endpoint.
* @param _eid The endpoint ID.
* @return peer The peer address (OApp instance) associated with the corresponding endpoint.
*/
function peers(uint32 _eid) external view returns (bytes32 peer);
/**
* @notice Sets the peer address (OApp instance) for a corresponding endpoint.
* @param _eid The endpoint ID.
* @param _peer The address of the peer to be associated with the corresponding endpoint.
*/
function setPeer(uint32 _eid, bytes32 _peer) external;
/**
* @notice Sets the delegate address for the OApp Core.
* @param _delegate The address of the delegate to be set.
*/
function setDelegate(address _delegate) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
/**
* @title IOAppMsgInspector
* @dev Interface for the OApp Message Inspector, allowing examination of message and options contents.
*/
interface IOAppMsgInspector {
// Custom error message for inspection failure
error InspectionFailed(bytes message, bytes options);
/**
* @notice Allows the inspector to examine LayerZero message contents and optionally throw a revert if invalid.
* @param _message The message payload to be inspected.
* @param _options Additional options or parameters for inspection.
* @return valid A boolean indicating whether the inspection passed (true) or failed (false).
*
* @dev Optionally done as a revert, OR use the boolean provided to handle the failure.
*/
function inspect(bytes calldata _message, bytes calldata _options) external view returns (bool valid);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
/**
* @dev Struct representing enforced option parameters.
*/
struct EnforcedOptionParam {
uint32 eid; // Endpoint ID
uint16 msgType; // Message Type
bytes options; // Additional options
}
/**
* @title IOAppOptionsType3
* @dev Interface for the OApp with Type 3 Options, allowing the setting and combining of enforced options.
*/
interface IOAppOptionsType3 {
// Custom error message for invalid options
error InvalidOptions(bytes options);
// Event emitted when enforced options are set
event EnforcedOptionSet(EnforcedOptionParam[] _enforcedOptions);
/**
* @notice Sets enforced options for specific endpoint and message type combinations.
* @param _enforcedOptions An array of EnforcedOptionParam structures specifying enforced options.
*/
function setEnforcedOptions(EnforcedOptionParam[] calldata _enforcedOptions) external;
/**
* @notice Combines options for a given endpoint and message type.
* @param _eid The endpoint ID.
* @param _msgType The OApp message type.
* @param _extraOptions Additional options passed by the caller.
* @return options The combination of caller specified options AND enforced options.
*/
function combineOptions(
uint32 _eid,
uint16 _msgType,
bytes calldata _extraOptions
) external view returns (bytes memory options);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { ILayerZeroReceiver, Origin } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroReceiver.sol";
interface IOAppReceiver is ILayerZeroReceiver {
/**
* @notice Indicates whether an address is an approved composeMsg sender to the Endpoint.
* @param _origin The origin information containing the source endpoint and sender address.
* - srcEid: The source chain endpoint ID.
* - sender: The sender address on the src chain.
* - nonce: The nonce of the message.
* @param _message The lzReceive payload.
* @param _sender The sender address.
* @return isSender Is a valid sender.
*
* @dev Applications can optionally choose to implement a separate composeMsg sender that is NOT the bridging layer.
* @dev The default sender IS the OAppReceiver implementer.
*/
function isComposeMsgSender(
Origin calldata _origin,
bytes calldata _message,
address _sender
) external view returns (bool isSender);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { IOAppOptionsType3, EnforcedOptionParam } from "../interfaces/IOAppOptionsType3.sol";
/**
* @title OAppOptionsType3
* @dev Abstract contract implementing the IOAppOptionsType3 interface with type 3 options.
*/
abstract contract OAppOptionsType3 is IOAppOptionsType3, Ownable {
uint16 internal constant OPTION_TYPE_3 = 3;
// @dev The "msgType" should be defined in the child contract.
mapping(uint32 eid => mapping(uint16 msgType => bytes enforcedOption)) public enforcedOptions;
/**
* @dev Sets the enforced options for specific endpoint and message type combinations.
* @param _enforcedOptions An array of EnforcedOptionParam structures specifying enforced options.
*
* @dev Only the owner/admin of the OApp can call this function.
* @dev Provides a way for the OApp to enforce things like paying for PreCrime, AND/OR minimum dst lzReceive gas amounts etc.
* @dev These enforced options can vary as the potential options/execution on the remote may differ as per the msgType.
* eg. Amount of lzReceive() gas necessary to deliver a lzCompose() message adds overhead you dont want to pay
* if you are only making a standard LayerZero message ie. lzReceive() WITHOUT sendCompose().
*/
function setEnforcedOptions(EnforcedOptionParam[] calldata _enforcedOptions) public virtual onlyOwner {
_setEnforcedOptions(_enforcedOptions);
}
/**
* @dev Sets the enforced options for specific endpoint and message type combinations.
* @param _enforcedOptions An array of EnforcedOptionParam structures specifying enforced options.
*
* @dev Provides a way for the OApp to enforce things like paying for PreCrime, AND/OR minimum dst lzReceive gas amounts etc.
* @dev These enforced options can vary as the potential options/execution on the remote may differ as per the msgType.
* eg. Amount of lzReceive() gas necessary to deliver a lzCompose() message adds overhead you dont want to pay
* if you are only making a standard LayerZero message ie. lzReceive() WITHOUT sendCompose().
*/
function _setEnforcedOptions(EnforcedOptionParam[] memory _enforcedOptions) internal virtual {
for (uint256 i = 0; i < _enforcedOptions.length; i++) {
// @dev Enforced options are only available for optionType 3, as type 1 and 2 dont support combining.
_assertOptionsType3(_enforcedOptions[i].options);
enforcedOptions[_enforcedOptions[i].eid][_enforcedOptions[i].msgType] = _enforcedOptions[i].options;
}
emit EnforcedOptionSet(_enforcedOptions);
}
/**
* @notice Combines options for a given endpoint and message type.
* @param _eid The endpoint ID.
* @param _msgType The OAPP message type.
* @param _extraOptions Additional options passed by the caller.
* @return options The combination of caller specified options AND enforced options.
*
* @dev If there is an enforced lzReceive option:
* - {gasLimit: 200k, msg.value: 1 ether} AND a caller supplies a lzReceive option: {gasLimit: 100k, msg.value: 0.5 ether}
* - The resulting options will be {gasLimit: 300k, msg.value: 1.5 ether} when the message is executed on the remote lzReceive() function.
* @dev This presence of duplicated options is handled off-chain in the verifier/executor.
*/
function combineOptions(
uint32 _eid,
uint16 _msgType,
bytes calldata _extraOptions
) public view virtual returns (bytes memory) {
bytes memory enforced = enforcedOptions[_eid][_msgType];
// No enforced options, pass whatever the caller supplied, even if it's empty or legacy type 1/2 options.
if (enforced.length == 0) return _extraOptions;
// No caller options, return enforced
if (_extraOptions.length == 0) return enforced;
// @dev If caller provided _extraOptions, must be type 3 as its the ONLY type that can be combined.
if (_extraOptions.length >= 2) {
_assertOptionsType3(_extraOptions);
// @dev Remove the first 2 bytes containing the type from the _extraOptions and combine with enforced.
return bytes.concat(enforced, _extraOptions[2:]);
}
// No valid set of options was found.
revert InvalidOptions(_extraOptions);
}
/**
* @dev Internal function to assert that options are of type 3.
* @param _options The options to be checked.
*/
function _assertOptionsType3(bytes memory _options) internal pure virtual {
uint16 optionsType;
assembly {
optionsType := mload(add(_options, 2))
}
if (optionsType != OPTION_TYPE_3) revert InvalidOptions(_options);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { BytesLib } from "solidity-bytes-utils/contracts/BytesLib.sol";
import { SafeCast } from "@openzeppelin/contracts/utils/math/SafeCast.sol";
import { ExecutorOptions } from "@layerzerolabs/lz-evm-protocol-v2/contracts/messagelib/libs/ExecutorOptions.sol";
import { DVNOptions } from "@layerzerolabs/lz-evm-messagelib-v2/contracts/uln/libs/DVNOptions.sol";
/**
* @title OptionsBuilder
* @dev Library for building and encoding various message options.
*/
library OptionsBuilder {
using SafeCast for uint256;
using BytesLib for bytes;
// Constants for options types
uint16 internal constant TYPE_1 = 1; // legacy options type 1
uint16 internal constant TYPE_2 = 2; // legacy options type 2
uint16 internal constant TYPE_3 = 3;
// Custom error message
error InvalidSize(uint256 max, uint256 actual);
error InvalidOptionType(uint16 optionType);
// Modifier to ensure only options of type 3 are used
modifier onlyType3(bytes memory _options) {
if (_options.toUint16(0) != TYPE_3) revert InvalidOptionType(_options.toUint16(0));
_;
}
/**
* @dev Creates a new options container with type 3.
* @return options The newly created options container.
*/
function newOptions() internal pure returns (bytes memory) {
return abi.encodePacked(TYPE_3);
}
/**
* @dev Adds an executor LZ receive option to the existing options.
* @param _options The existing options container.
* @param _gas The gasLimit used on the lzReceive() function in the OApp.
* @param _value The msg.value passed to the lzReceive() function in the OApp.
* @return options The updated options container.
*
* @dev When multiples of this option are added, they are summed by the executor
* eg. if (_gas: 200k, and _value: 1 ether) AND (_gas: 100k, _value: 0.5 ether) are sent in an option to the LayerZeroEndpoint,
* that becomes (300k, 1.5 ether) when the message is executed on the remote lzReceive() function.
*/
function addExecutorLzReceiveOption(
bytes memory _options,
uint128 _gas,
uint128 _value
) internal pure onlyType3(_options) returns (bytes memory) {
bytes memory option = ExecutorOptions.encodeLzReceiveOption(_gas, _value);
return addExecutorOption(_options, ExecutorOptions.OPTION_TYPE_LZRECEIVE, option);
}
/**
* @dev Adds an executor native drop option to the existing options.
* @param _options The existing options container.
* @param _amount The amount for the native value that is airdropped to the 'receiver'.
* @param _receiver The receiver address for the native drop option.
* @return options The updated options container.
*
* @dev When multiples of this option are added, they are summed by the executor on the remote chain.
*/
function addExecutorNativeDropOption(
bytes memory _options,
uint128 _amount,
bytes32 _receiver
) internal pure onlyType3(_options) returns (bytes memory) {
bytes memory option = ExecutorOptions.encodeNativeDropOption(_amount, _receiver);
return addExecutorOption(_options, ExecutorOptions.OPTION_TYPE_NATIVE_DROP, option);
}
/**
* @dev Adds an executor LZ compose option to the existing options.
* @param _options The existing options container.
* @param _index The index for the lzCompose() function call.
* @param _gas The gasLimit for the lzCompose() function call.
* @param _value The msg.value for the lzCompose() function call.
* @return options The updated options container.
*
* @dev When multiples of this option are added, they are summed PER index by the executor on the remote chain.
* @dev If the OApp sends N lzCompose calls on the remote, you must provide N incremented indexes starting with 0.
* ie. When your remote OApp composes (N = 3) messages, you must set this option for index 0,1,2
*/
function addExecutorLzComposeOption(
bytes memory _options,
uint16 _index,
uint128 _gas,
uint128 _value
) internal pure onlyType3(_options) returns (bytes memory) {
bytes memory option = ExecutorOptions.encodeLzComposeOption(_index, _gas, _value);
return addExecutorOption(_options, ExecutorOptions.OPTION_TYPE_LZCOMPOSE, option);
}
/**
* @dev Adds an executor ordered execution option to the existing options.
* @param _options The existing options container.
* @return options The updated options container.
*/
function addExecutorOrderedExecutionOption(
bytes memory _options
) internal pure onlyType3(_options) returns (bytes memory) {
return addExecutorOption(_options, ExecutorOptions.OPTION_TYPE_ORDERED_EXECUTION, bytes(""));
}
/**
* @dev Adds a DVN pre-crime option to the existing options.
* @param _options The existing options container.
* @param _dvnIdx The DVN index for the pre-crime option.
* @return options The updated options container.
*/
function addDVNPreCrimeOption(
bytes memory _options,
uint8 _dvnIdx
) internal pure onlyType3(_options) returns (bytes memory) {
return addDVNOption(_options, _dvnIdx, DVNOptions.OPTION_TYPE_PRECRIME, bytes(""));
}
/**
* @dev Adds an executor option to the existing options.
* @param _options The existing options container.
* @param _optionType The type of the executor option.
* @param _option The encoded data for the executor option.
* @return options The updated options container.
*/
function addExecutorOption(
bytes memory _options,
uint8 _optionType,
bytes memory _option
) internal pure onlyType3(_options) returns (bytes memory) {
return
abi.encodePacked(
_options,
ExecutorOptions.WORKER_ID,
_option.length.toUint16() + 1, // +1 for optionType
_optionType,
_option
);
}
/**
* @dev Adds a DVN option to the existing options.
* @param _options The existing options container.
* @param _dvnIdx The DVN index for the DVN option.
* @param _optionType The type of the DVN option.
* @param _option The encoded data for the DVN option.
* @return options The updated options container.
*/
function addDVNOption(
bytes memory _options,
uint8 _dvnIdx,
uint8 _optionType,
bytes memory _option
) internal pure onlyType3(_options) returns (bytes memory) {
return
abi.encodePacked(
_options,
DVNOptions.WORKER_ID,
_option.length.toUint16() + 2, // +2 for optionType and dvnIdx
_dvnIdx,
_optionType,
_option
);
}
/**
* @dev Encodes legacy options of type 1.
* @param _executionGas The gasLimit value passed to lzReceive().
* @return legacyOptions The encoded legacy options.
*/
function encodeLegacyOptionsType1(uint256 _executionGas) internal pure returns (bytes memory) {
if (_executionGas > type(uint128).max) revert InvalidSize(type(uint128).max, _executionGas);
return abi.encodePacked(TYPE_1, _executionGas);
}
/**
* @dev Encodes legacy options of type 2.
* @param _executionGas The gasLimit value passed to lzReceive().
* @param _nativeForDst The amount of native air dropped to the receiver.
* @param _receiver The _nativeForDst receiver address.
* @return legacyOptions The encoded legacy options of type 2.
*/
function encodeLegacyOptionsType2(
uint256 _executionGas,
uint256 _nativeForDst,
bytes memory _receiver // @dev Use bytes instead of bytes32 in legacy type 2 for _receiver.
) internal pure returns (bytes memory) {
if (_executionGas > type(uint128).max) revert InvalidSize(type(uint128).max, _executionGas);
if (_nativeForDst > type(uint128).max) revert InvalidSize(type(uint128).max, _nativeForDst);
if (_receiver.length > 32) revert InvalidSize(32, _receiver.length);
return abi.encodePacked(TYPE_2, _executionGas, _nativeForDst, _receiver);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
// @dev Import the 'MessagingFee' and 'MessagingReceipt' so it's exposed to OApp implementers
// solhint-disable-next-line no-unused-import
import { OAppSender, MessagingFee, MessagingReceipt } from "./OAppSender.sol";
// @dev Import the 'Origin' so it's exposed to OApp implementers
// solhint-disable-next-line no-unused-import
import { OAppReceiver, Origin } from "./OAppReceiver.sol";
import { OAppCore } from "./OAppCore.sol";
/**
* @title OApp
* @dev Abstract contract serving as the base for OApp implementation, combining OAppSender and OAppReceiver functionality.
*/
abstract contract OApp is OAppSender, OAppReceiver {
/**
* @dev Constructor to initialize the OApp with the provided endpoint and owner.
* @param _endpoint The address of the LOCAL LayerZero endpoint.
* @param _delegate The delegate capable of making OApp configurations inside of the endpoint.
*/
constructor(address _endpoint, address _delegate) OAppCore(_endpoint, _delegate) {}
/**
* @notice Retrieves the OApp version information.
* @return senderVersion The version of the OAppSender.sol implementation.
* @return receiverVersion The version of the OAppReceiver.sol implementation.
*/
function oAppVersion()
public
pure
virtual
override(OAppSender, OAppReceiver)
returns (uint64 senderVersion, uint64 receiverVersion)
{
return (SENDER_VERSION, RECEIVER_VERSION);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { IOAppCore, ILayerZeroEndpointV2 } from "./interfaces/IOAppCore.sol";
/**
* @title OAppCore
* @dev Abstract contract implementing the IOAppCore interface with basic OApp configurations.
*/
abstract contract OAppCore is IOAppCore, Ownable {
// The LayerZero endpoint associated with the given OApp
ILayerZeroEndpointV2 public immutable endpoint;
// Mapping to store peers associated with corresponding endpoints
mapping(uint32 eid => bytes32 peer) public peers;
/**
* @dev Constructor to initialize the OAppCore with the provided endpoint and delegate.
* @param _endpoint The address of the LOCAL Layer Zero endpoint.
* @param _delegate The delegate capable of making OApp configurations inside of the endpoint.
*
* @dev The delegate typically should be set as the owner of the contract.
*/
constructor(address _endpoint, address _delegate) {
endpoint = ILayerZeroEndpointV2(_endpoint);
if (_delegate == address(0)) revert InvalidDelegate();
endpoint.setDelegate(_delegate);
}
/**
* @notice Sets the peer address (OApp instance) for a corresponding endpoint.
* @param _eid The endpoint ID.
* @param _peer The address of the peer to be associated with the corresponding endpoint.
*
* @dev Only the owner/admin of the OApp can call this function.
* @dev Indicates that the peer is trusted to send LayerZero messages to this OApp.
* @dev Set this to bytes32(0) to remove the peer address.
* @dev Peer is a bytes32 to accommodate non-evm chains.
*/
function setPeer(uint32 _eid, bytes32 _peer) public virtual onlyOwner {
_setPeer(_eid, _peer);
}
/**
* @notice Sets the peer address (OApp instance) for a corresponding endpoint.
* @param _eid The endpoint ID.
* @param _peer The address of the peer to be associated with the corresponding endpoint.
*
* @dev Indicates that the peer is trusted to send LayerZero messages to this OApp.
* @dev Set this to bytes32(0) to remove the peer address.
* @dev Peer is a bytes32 to accommodate non-evm chains.
*/
function _setPeer(uint32 _eid, bytes32 _peer) internal virtual {
peers[_eid] = _peer;
emit PeerSet(_eid, _peer);
}
/**
* @notice Internal function to get the peer address associated with a specific endpoint; reverts if NOT set.
* ie. the peer is set to bytes32(0).
* @param _eid The endpoint ID.
* @return peer The address of the peer associated with the specified endpoint.
*/
function _getPeerOrRevert(uint32 _eid) internal view virtual returns (bytes32) {
bytes32 peer = peers[_eid];
if (peer == bytes32(0)) revert NoPeer(_eid);
return peer;
}
/**
* @notice Sets the delegate address for the OApp.
* @param _delegate The address of the delegate to be set.
*
* @dev Only the owner/admin of the OApp can call this function.
* @dev Provides the ability for a delegate to set configs, on behalf of the OApp, directly on the Endpoint contract.
*/
function setDelegate(address _delegate) public onlyOwner {
endpoint.setDelegate(_delegate);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { IOAppReceiver, Origin } from "./interfaces/IOAppReceiver.sol";
import { OAppCore } from "./OAppCore.sol";
/**
* @title OAppReceiver
* @dev Abstract contract implementing the ILayerZeroReceiver interface and extending OAppCore for OApp receivers.
*/
abstract contract OAppReceiver is IOAppReceiver, OAppCore {
// Custom error message for when the caller is not the registered endpoint/
error OnlyEndpoint(address addr);
// @dev The version of the OAppReceiver implementation.
// @dev Version is bumped when changes are made to this contract.
uint64 internal constant RECEIVER_VERSION = 2;
/**
* @notice Retrieves the OApp version information.
* @return senderVersion The version of the OAppSender.sol contract.
* @return receiverVersion The version of the OAppReceiver.sol contract.
*
* @dev Providing 0 as the default for OAppSender version. Indicates that the OAppSender is not implemented.
* ie. this is a RECEIVE only OApp.
* @dev If the OApp uses both OAppSender and OAppReceiver, then this needs to be override returning the correct versions.
*/
function oAppVersion() public view virtual returns (uint64 senderVersion, uint64 receiverVersion) {
return (0, RECEIVER_VERSION);
}
/**
* @notice Indicates whether an address is an approved composeMsg sender to the Endpoint.
* @dev _origin The origin information containing the source endpoint and sender address.
* - srcEid: The source chain endpoint ID.
* - sender: The sender address on the src chain.
* - nonce: The nonce of the message.
* @dev _message The lzReceive payload.
* @param _sender The sender address.
* @return isSender Is a valid sender.
*
* @dev Applications can optionally choose to implement separate composeMsg senders that are NOT the bridging layer.
* @dev The default sender IS the OAppReceiver implementer.
*/
function isComposeMsgSender(
Origin calldata /*_origin*/,
bytes calldata /*_message*/,
address _sender
) public view virtual returns (bool) {
return _sender == address(this);
}
/**
* @notice Checks if the path initialization is allowed based on the provided origin.
* @param origin The origin information containing the source endpoint and sender address.
* @return Whether the path has been initialized.
*
* @dev This indicates to the endpoint that the OApp has enabled msgs for this particular path to be received.
* @dev This defaults to assuming if a peer has been set, its initialized.
* Can be overridden by the OApp if there is other logic to determine this.
*/
function allowInitializePath(Origin calldata origin) public view virtual returns (bool) {
return peers[origin.srcEid] == origin.sender;
}
/**
* @notice Retrieves the next nonce for a given source endpoint and sender address.
* @dev _srcEid The source endpoint ID.
* @dev _sender The sender address.
* @return nonce The next nonce.
*
* @dev The path nonce starts from 1. If 0 is returned it means that there is NO nonce ordered enforcement.
* @dev Is required by the off-chain executor to determine the OApp expects msg execution is ordered.
* @dev This is also enforced by the OApp.
* @dev By default this is NOT enabled. ie. nextNonce is hardcoded to return 0.
*/
function nextNonce(uint32 /*_srcEid*/, bytes32 /*_sender*/) public view virtual returns (uint64 nonce) {
return 0;
}
/**
* @dev Entry point for receiving messages or packets from the endpoint.
* @param _origin The origin information containing the source endpoint and sender address.
* - srcEid: The source chain endpoint ID.
* - sender: The sender address on the src chain.
* - nonce: The nonce of the message.
* @param _guid The unique identifier for the received LayerZero message.
* @param _message The payload of the received message.
* @param _executor The address of the executor for the received message.
* @param _extraData Additional arbitrary data provided by the corresponding executor.
*
* @dev Entry point for receiving msg/packet from the LayerZero endpoint.
*/
function lzReceive(
Origin calldata _origin,
bytes32 _guid,
bytes calldata _message,
address _executor,
bytes calldata _extraData
) public payable virtual {
// Ensures that only the endpoint can attempt to lzReceive() messages to this OApp.
if (address(endpoint) != msg.sender) revert OnlyEndpoint(msg.sender);
// Ensure that the sender matches the expected peer for the source endpoint.
if (_getPeerOrRevert(_origin.srcEid) != _origin.sender) revert OnlyPeer(_origin.srcEid, _origin.sender);
// Call the internal OApp implementation of lzReceive.
_lzReceive(_origin, _guid, _message, _executor, _extraData);
}
/**
* @dev Internal function to implement lzReceive logic without needing to copy the basic parameter validation.
*/
function _lzReceive(
Origin calldata _origin,
bytes32 _guid,
bytes calldata _message,
address _executor,
bytes calldata _extraData
) internal virtual;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { SafeERC20, IERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { MessagingParams, MessagingFee, MessagingReceipt } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol";
import { OAppCore } from "./OAppCore.sol";
/**
* @title OAppSender
* @dev Abstract contract implementing the OAppSender functionality for sending messages to a LayerZero endpoint.
*/
abstract contract OAppSender is OAppCore {
using SafeERC20 for IERC20;
// Custom error messages
error NotEnoughNative(uint256 msgValue);
error LzTokenUnavailable();
// @dev The version of the OAppSender implementation.
// @dev Version is bumped when changes are made to this contract.
uint64 internal constant SENDER_VERSION = 1;
/**
* @notice Retrieves the OApp version information.
* @return senderVersion The version of the OAppSender.sol contract.
* @return receiverVersion The version of the OAppReceiver.sol contract.
*
* @dev Providing 0 as the default for OAppReceiver version. Indicates that the OAppReceiver is not implemented.
* ie. this is a SEND only OApp.
* @dev If the OApp uses both OAppSender and OAppReceiver, then this needs to be override returning the correct versions
*/
function oAppVersion() public view virtual returns (uint64 senderVersion, uint64 receiverVersion) {
return (SENDER_VERSION, 0);
}
/**
* @dev Internal function to interact with the LayerZero EndpointV2.quote() for fee calculation.
* @param _dstEid The destination endpoint ID.
* @param _message The message payload.
* @param _options Additional options for the message.
* @param _payInLzToken Flag indicating whether to pay the fee in LZ tokens.
* @return fee The calculated MessagingFee for the message.
* - nativeFee: The native fee for the message.
* - lzTokenFee: The LZ token fee for the message.
*/
function _quote(
uint32 _dstEid,
bytes memory _message,
bytes memory _options,
bool _payInLzToken
) internal view virtual returns (MessagingFee memory fee) {
return
endpoint.quote(
MessagingParams(_dstEid, _getPeerOrRevert(_dstEid), _message, _options, _payInLzToken),
address(this)
);
}
/**
* @dev Internal function to interact with the LayerZero EndpointV2.send() for sending a message.
* @param _dstEid The destination endpoint ID.
* @param _message The message payload.
* @param _options Additional options for the message.
* @param _fee The calculated LayerZero fee for the message.
* - nativeFee: The native fee.
* - lzTokenFee: The lzToken fee.
* @param _refundAddress The address to receive any excess fee values sent to the endpoint.
* @return receipt The receipt for the sent message.
* - guid: The unique identifier for the sent message.
* - nonce: The nonce of the sent message.
* - fee: The LayerZero fee incurred for the message.
*/
function _lzSend(
uint32 _dstEid,
bytes memory _message,
bytes memory _options,
MessagingFee memory _fee,
address _refundAddress
) internal virtual returns (MessagingReceipt memory receipt) {
// @dev Push corresponding fees to the endpoint, any excess is sent back to the _refundAddress from the endpoint.
uint256 messageValue = _payNative(_fee.nativeFee);
if (_fee.lzTokenFee > 0) _payLzToken(_fee.lzTokenFee);
return
// solhint-disable-next-line check-send-result
endpoint.send{ value: messageValue }(
MessagingParams(_dstEid, _getPeerOrRevert(_dstEid), _message, _options, _fee.lzTokenFee > 0),
_refundAddress
);
}
/**
* @dev Internal function to pay the native fee associated with the message.
* @param _nativeFee The native fee to be paid.
* @return nativeFee The amount of native currency paid.
*
* @dev If the OApp needs to initiate MULTIPLE LayerZero messages in a single transaction,
* this will need to be overridden because msg.value would contain multiple lzFees.
* @dev Should be overridden in the event the LayerZero endpoint requires a different native currency.
* @dev Some EVMs use an ERC20 as a method for paying transactions/gasFees.
* @dev The endpoint is EITHER/OR, ie. it will NOT support both types of native payment at a time.
*/
function _payNative(uint256 _nativeFee) internal virtual returns (uint256 nativeFee) {
if (msg.value != _nativeFee) revert NotEnoughNative(msg.value);
return _nativeFee;
}
/**
* @dev Internal function to pay the LZ token fee associated with the message.
* @param _lzTokenFee The LZ token fee to be paid.
*
* @dev If the caller is trying to pay in the specified lzToken, then the lzTokenFee is passed to the endpoint.
* @dev Any excess sent, is passed back to the specified _refundAddress in the _lzSend().
*/
function _payLzToken(uint256 _lzTokenFee) internal virtual {
// @dev Cannot cache the token because it is not immutable in the endpoint.
address lzToken = endpoint.lzToken();
if (lzToken == address(0)) revert LzTokenUnavailable();
// Pay LZ token fee by sending tokens to the endpoint.
IERC20(lzToken).safeTransferFrom(msg.sender, address(endpoint), _lzTokenFee);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { MessagingReceipt, MessagingFee } from "../../oapp/OAppSender.sol";
/**
* @dev Struct representing token parameters for the OFT send() operation.
*/
struct SendParam {
uint32 dstEid; // Destination endpoint ID.
bytes32 to; // Recipient address.
uint256 amountLD; // Amount to send in local decimals.
uint256 minAmountLD; // Minimum amount to send in local decimals.
bytes extraOptions; // Additional options supplied by the caller to be used in the LayerZero message.
bytes composeMsg; // The composed message for the send() operation.
bytes oftCmd; // The OFT command to be executed, unused in default OFT implementations.
}
/**
* @dev Struct representing OFT limit information.
* @dev These amounts can change dynamically and are up the the specific oft implementation.
*/
struct OFTLimit {
uint256 minAmountLD; // Minimum amount in local decimals that can be sent to the recipient.
uint256 maxAmountLD; // Maximum amount in local decimals that can be sent to the recipient.
}
/**
* @dev Struct representing OFT receipt information.
*/
struct OFTReceipt {
uint256 amountSentLD; // Amount of tokens ACTUALLY debited from the sender in local decimals.
// @dev In non-default implementations, the amountReceivedLD COULD differ from this value.
uint256 amountReceivedLD; // Amount of tokens to be received on the remote side.
}
/**
* @dev Struct representing OFT fee details.
* @dev Future proof mechanism to provide a standardized way to communicate fees to things like a UI.
*/
struct OFTFeeDetail {
int256 feeAmountLD; // Amount of the fee in local decimals.
string description; // Description of the fee.
}
/**
* @title IOFT
* @dev Interface for the OftChain (OFT) token.
* @dev Does not inherit ERC20 to accommodate usage by OFTAdapter as well.
* @dev This specific interface ID is '0x02e49c2c'.
*/
interface IOFT {
// Custom error messages
error InvalidLocalDecimals();
error SlippageExceeded(uint256 amountLD, uint256 minAmountLD);
// Events
event OFTSent(
bytes32 indexed guid, // GUID of the OFT message.
uint32 dstEid, // Destination Endpoint ID.
address indexed fromAddress, // Address of the sender on the src chain.
uint256 amountSentLD, // Amount of tokens sent in local decimals.
uint256 amountReceivedLD // Amount of tokens received in local decimals.
);
event OFTReceived(
bytes32 indexed guid, // GUID of the OFT message.
uint32 srcEid, // Source Endpoint ID.
address indexed toAddress, // Address of the recipient on the dst chain.
uint256 amountReceivedLD // Amount of tokens received in local decimals.
);
/**
* @notice Retrieves interfaceID and the version of the OFT.
* @return interfaceId The interface ID.
* @return version The version.
*
* @dev interfaceId: This specific interface ID is '0x02e49c2c'.
* @dev version: Indicates a cross-chain compatible msg encoding with other OFTs.
* @dev If a new feature is added to the OFT cross-chain msg encoding, the version will be incremented.
* ie. localOFT version(x,1) CAN send messages to remoteOFT version(x,1)
*/
function oftVersion() external view returns (bytes4 interfaceId, uint64 version);
/**
* @notice Retrieves the address of the token associated with the OFT.
* @return token The address of the ERC20 token implementation.
*/
function token() external view returns (address);
/**
* @notice Indicates whether the OFT contract requires approval of the 'token()' to send.
* @return requiresApproval Needs approval of the underlying token implementation.
*
* @dev Allows things like wallet implementers to determine integration requirements,
* without understanding the underlying token implementation.
*/
function approvalRequired() external view returns (bool);
/**
* @notice Retrieves the shared decimals of the OFT.
* @return sharedDecimals The shared decimals of the OFT.
*/
function sharedDecimals() external view returns (uint8);
/**
* @notice Provides a quote for OFT-related operations.
* @param _sendParam The parameters for the send operation.
* @return limit The OFT limit information.
* @return oftFeeDetails The details of OFT fees.
* @return receipt The OFT receipt information.
*/
function quoteOFT(
SendParam calldata _sendParam
) external view returns (OFTLimit memory, OFTFeeDetail[] memory oftFeeDetails, OFTReceipt memory);
/**
* @notice Provides a quote for the send() operation.
* @param _sendParam The parameters for the send() operation.
* @param _payInLzToken Flag indicating whether the caller is paying in the LZ token.
* @return fee The calculated LayerZero messaging fee from the send() operation.
*
* @dev MessagingFee: LayerZero msg fee
* - nativeFee: The native fee.
* - lzTokenFee: The lzToken fee.
*/
function quoteSend(SendParam calldata _sendParam, bool _payInLzToken) external view returns (MessagingFee memory);
/**
* @notice Executes the send() operation.
* @param _sendParam The parameters for the send operation.
* @param _fee The fee information supplied by the caller.
* - nativeFee: The native fee.
* - lzTokenFee: The lzToken fee.
* @param _refundAddress The address to receive any excess funds from fees etc. on the src.
* @return receipt The LayerZero messaging receipt from the send() operation.
* @return oftReceipt The OFT receipt information.
*
* @dev MessagingReceipt: LayerZero msg receipt
* - guid: The unique identifier for the sent message.
* - nonce: The nonce of the sent message.
* - fee: The LayerZero fee incurred for the message.
*/
function send(
SendParam calldata _sendParam,
MessagingFee calldata _fee,
address _refundAddress
) external payable returns (MessagingReceipt memory, OFTReceipt memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
library OFTComposeMsgCodec {
// Offset constants for decoding composed messages
uint8 private constant NONCE_OFFSET = 8;
uint8 private constant SRC_EID_OFFSET = 12;
uint8 private constant AMOUNT_LD_OFFSET = 44;
uint8 private constant COMPOSE_FROM_OFFSET = 76;
/**
* @dev Encodes a OFT composed message.
* @param _nonce The nonce value.
* @param _srcEid The source endpoint ID.
* @param _amountLD The amount in local decimals.
* @param _composeMsg The composed message.
* @return _msg The encoded Composed message.
*/
function encode(
uint64 _nonce,
uint32 _srcEid,
uint256 _amountLD,
bytes memory _composeMsg // 0x[composeFrom][composeMsg]
) internal pure returns (bytes memory _msg) {
_msg = abi.encodePacked(_nonce, _srcEid, _amountLD, _composeMsg);
}
/**
* @dev Retrieves the nonce from the composed message.
* @param _msg The message.
* @return The nonce value.
*/
function nonce(bytes calldata _msg) internal pure returns (uint64) {
return uint64(bytes8(_msg[:NONCE_OFFSET]));
}
/**
* @dev Retrieves the source endpoint ID from the composed message.
* @param _msg The message.
* @return The source endpoint ID.
*/
function srcEid(bytes calldata _msg) internal pure returns (uint32) {
return uint32(bytes4(_msg[NONCE_OFFSET:SRC_EID_OFFSET]));
}
/**
* @dev Retrieves the amount in local decimals from the composed message.
* @param _msg The message.
* @return The amount in local decimals.
*/
function amountLD(bytes calldata _msg) internal pure returns (uint256) {
return uint256(bytes32(_msg[SRC_EID_OFFSET:AMOUNT_LD_OFFSET]));
}
/**
* @dev Retrieves the composeFrom value from the composed message.
* @param _msg The message.
* @return The composeFrom value.
*/
function composeFrom(bytes calldata _msg) internal pure returns (bytes32) {
return bytes32(_msg[AMOUNT_LD_OFFSET:COMPOSE_FROM_OFFSET]);
}
/**
* @dev Retrieves the composed message.
* @param _msg The message.
* @return The composed message.
*/
function composeMsg(bytes calldata _msg) internal pure returns (bytes memory) {
return _msg[COMPOSE_FROM_OFFSET:];
}
/**
* @dev Converts an address to bytes32.
* @param _addr The address to convert.
* @return The bytes32 representation of the address.
*/
function addressToBytes32(address _addr) internal pure returns (bytes32) {
return bytes32(uint256(uint160(_addr)));
}
/**
* @dev Converts bytes32 to an address.
* @param _b The bytes32 value to convert.
* @return The address representation of bytes32.
*/
function bytes32ToAddress(bytes32 _b) internal pure returns (address) {
return address(uint160(uint256(_b)));
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
library OFTMsgCodec {
// Offset constants for encoding and decoding OFT messages
uint8 private constant SEND_TO_OFFSET = 32;
uint8 private constant SEND_AMOUNT_SD_OFFSET = 40;
/**
* @dev Encodes an OFT LayerZero message.
* @param _sendTo The recipient address.
* @param _amountShared The amount in shared decimals.
* @param _composeMsg The composed message.
* @return _msg The encoded message.
* @return hasCompose A boolean indicating whether the message has a composed payload.
*/
function encode(
bytes32 _sendTo,
uint64 _amountShared,
bytes memory _composeMsg
) internal view returns (bytes memory _msg, bool hasCompose) {
hasCompose = _composeMsg.length > 0;
// @dev Remote chains will want to know the composed function caller ie. msg.sender on the src.
_msg = hasCompose
? abi.encodePacked(_sendTo, _amountShared, addressToBytes32(msg.sender), _composeMsg)
: abi.encodePacked(_sendTo, _amountShared);
}
/**
* @dev Checks if the OFT message is composed.
* @param _msg The OFT message.
* @return A boolean indicating whether the message is composed.
*/
function isComposed(bytes calldata _msg) internal pure returns (bool) {
return _msg.length > SEND_AMOUNT_SD_OFFSET;
}
/**
* @dev Retrieves the recipient address from the OFT message.
* @param _msg The OFT message.
* @return The recipient address.
*/
function sendTo(bytes calldata _msg) internal pure returns (bytes32) {
return bytes32(_msg[:SEND_TO_OFFSET]);
}
/**
* @dev Retrieves the amount in shared decimals from the OFT message.
* @param _msg The OFT message.
* @return The amount in shared decimals.
*/
function amountSD(bytes calldata _msg) internal pure returns (uint64) {
return uint64(bytes8(_msg[SEND_TO_OFFSET:SEND_AMOUNT_SD_OFFSET]));
}
/**
* @dev Retrieves the composed message from the OFT message.
* @param _msg The OFT message.
* @return The composed message.
*/
function composeMsg(bytes calldata _msg) internal pure returns (bytes memory) {
return _msg[SEND_AMOUNT_SD_OFFSET:];
}
/**
* @dev Converts an address to bytes32.
* @param _addr The address to convert.
* @return The bytes32 representation of the address.
*/
function addressToBytes32(address _addr) internal pure returns (bytes32) {
return bytes32(uint256(uint160(_addr)));
}
/**
* @dev Converts bytes32 to an address.
* @param _b The bytes32 value to convert.
* @return The address representation of bytes32.
*/
function bytes32ToAddress(bytes32 _b) internal pure returns (address) {
return address(uint160(uint256(_b)));
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { ERC20 } from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import { IOFT, OFTCore } from "./OFTCore.sol";
/**
* @title OFT Contract
* @dev OFT is an ERC-20 token that extends the functionality of the OFTCore contract.
*/
abstract contract OFT is OFTCore, ERC20 {
/**
* @dev Constructor for the OFT contract.
* @param _name The name of the OFT.
* @param _symbol The symbol of the OFT.
* @param _lzEndpoint The LayerZero endpoint address.
* @param _delegate The delegate capable of making OApp configurations inside of the endpoint.
*/
constructor(
string memory _name,
string memory _symbol,
address _lzEndpoint,
address _delegate
) ERC20(_name, _symbol) OFTCore(decimals(), _lzEndpoint, _delegate) {}
/**
* @dev Retrieves the address of the underlying ERC20 implementation.
* @return The address of the OFT token.
*
* @dev In the case of OFT, address(this) and erc20 are the same contract.
*/
function token() public view returns (address) {
return address(this);
}
/**
* @notice Indicates whether the OFT contract requires approval of the 'token()' to send.
* @return requiresApproval Needs approval of the underlying token implementation.
*
* @dev In the case of OFT where the contract IS the token, approval is NOT required.
*/
function approvalRequired() external pure virtual returns (bool) {
return false;
}
/**
* @dev Burns tokens from the sender's specified balance.
* @param _from The address to debit the tokens from.
* @param _amountLD The amount of tokens to send in local decimals.
* @param _minAmountLD The minimum amount to send in local decimals.
* @param _dstEid The destination chain ID.
* @return amountSentLD The amount sent in local decimals.
* @return amountReceivedLD The amount received in local decimals on the remote.
*/
function _debit(
address _from,
uint256 _amountLD,
uint256 _minAmountLD,
uint32 _dstEid
) internal virtual override returns (uint256 amountSentLD, uint256 amountReceivedLD) {
(amountSentLD, amountReceivedLD) = _debitView(_amountLD, _minAmountLD, _dstEid);
// @dev In NON-default OFT, amountSentLD could be 100, with a 10% fee, the amountReceivedLD amount is 90,
// therefore amountSentLD CAN differ from amountReceivedLD.
// @dev Default OFT burns on src.
_burn(_from, amountSentLD);
}
/**
* @dev Credits tokens to the specified address.
* @param _to The address to credit the tokens to.
* @param _amountLD The amount of tokens to credit in local decimals.
* @dev _srcEid The source chain ID.
* @return amountReceivedLD The amount of tokens ACTUALLY received in local decimals.
*/
function _credit(
address _to,
uint256 _amountLD,
uint32 /*_srcEid*/
) internal virtual override returns (uint256 amountReceivedLD) {
// @dev Default OFT mints on dst.
_mint(_to, _amountLD);
// @dev In the case of NON-default OFT, the _amountLD MIGHT not be == amountReceivedLD.
return _amountLD;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { IERC20Metadata, IERC20 } from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { IOFT, OFTCore } from "./OFTCore.sol";
/**
* @title OFTAdapter Contract
* @dev OFTAdapter is a contract that adapts an ERC-20 token to the OFT functionality.
*
* @dev For existing ERC20 tokens, this can be used to convert the token to crosschain compatibility.
* @dev WARNING: ONLY 1 of these should exist for a given global mesh,
* unless you make a NON-default implementation of OFT and needs to be done very carefully.
* @dev WARNING: The default OFTAdapter implementation assumes LOSSLESS transfers, ie. 1 token in, 1 token out.
* IF the 'innerToken' applies something like a transfer fee, the default will NOT work...
* a pre/post balance check will need to be done to calculate the amountSentLD/amountReceivedLD.
*/
abstract contract OFTAdapter is OFTCore {
using SafeERC20 for IERC20;
IERC20 internal immutable innerToken;
/**
* @dev Constructor for the OFTAdapter contract.
* @param _token The address of the ERC-20 token to be adapted.
* @param _lzEndpoint The LayerZero endpoint address.
* @param _delegate The delegate capable of making OApp configurations inside of the endpoint.
*/
constructor(
address _token,
address _lzEndpoint,
address _delegate
) OFTCore(IERC20Metadata(_token).decimals(), _lzEndpoint, _delegate) {
innerToken = IERC20(_token);
}
/**
* @dev Retrieves the address of the underlying ERC20 implementation.
* @return The address of the adapted ERC-20 token.
*
* @dev In the case of OFTAdapter, address(this) and erc20 are NOT the same contract.
*/
function token() public view returns (address) {
return address(innerToken);
}
/**
* @notice Indicates whether the OFT contract requires approval of the 'token()' to send.
* @return requiresApproval Needs approval of the underlying token implementation.
*
* @dev In the case of default OFTAdapter, approval is required.
* @dev In non-default OFTAdapter contracts with something like mint and burn privileges, it would NOT need approval.
*/
function approvalRequired() external pure virtual returns (bool) {
return true;
}
/**
* @dev Burns tokens from the sender's specified balance, ie. pull method.
* @param _from The address to debit from.
* @param _amountLD The amount of tokens to send in local decimals.
* @param _minAmountLD The minimum amount to send in local decimals.
* @param _dstEid The destination chain ID.
* @return amountSentLD The amount sent in local decimals.
* @return amountReceivedLD The amount received in local decimals on the remote.
*
* @dev msg.sender will need to approve this _amountLD of tokens to be locked inside of the contract.
* @dev WARNING: The default OFTAdapter implementation assumes LOSSLESS transfers, ie. 1 token in, 1 token out.
* IF the 'innerToken' applies something like a transfer fee, the default will NOT work...
* a pre/post balance check will need to be done to calculate the amountReceivedLD.
*/
function _debit(
address _from,
uint256 _amountLD,
uint256 _minAmountLD,
uint32 _dstEid
) internal virtual override returns (uint256 amountSentLD, uint256 amountReceivedLD) {
(amountSentLD, amountReceivedLD) = _debitView(_amountLD, _minAmountLD, _dstEid);
// @dev Lock tokens by moving them into this contract from the caller.
innerToken.safeTransferFrom(_from, address(this), amountSentLD);
}
/**
* @dev Credits tokens to the specified address.
* @param _to The address to credit the tokens to.
* @param _amountLD The amount of tokens to credit in local decimals.
* @dev _srcEid The source chain ID.
* @return amountReceivedLD The amount of tokens ACTUALLY received in local decimals.
*
* @dev WARNING: The default OFTAdapter implementation assumes LOSSLESS transfers, ie. 1 token in, 1 token out.
* IF the 'innerToken' applies something like a transfer fee, the default will NOT work...
* a pre/post balance check will need to be done to calculate the amountReceivedLD.
*/
function _credit(
address _to,
uint256 _amountLD,
uint32 /*_srcEid*/
) internal virtual override returns (uint256 amountReceivedLD) {
// @dev Unlock the tokens and transfer to the recipient.
innerToken.safeTransfer(_to, _amountLD);
// @dev In the case of NON-default OFTAdapter, the amountLD MIGHT not be == amountReceivedLD.
return _amountLD;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { OApp, Origin } from "../oapp/OApp.sol";
import { OAppOptionsType3 } from "../oapp/libs/OAppOptionsType3.sol";
import { IOAppMsgInspector } from "../oapp/interfaces/IOAppMsgInspector.sol";
import { OAppPreCrimeSimulator } from "../precrime/OAppPreCrimeSimulator.sol";
import { IOFT, SendParam, OFTLimit, OFTReceipt, OFTFeeDetail, MessagingReceipt, MessagingFee } from "./interfaces/IOFT.sol";
import { OFTMsgCodec } from "./libs/OFTMsgCodec.sol";
import { OFTComposeMsgCodec } from "./libs/OFTComposeMsgCodec.sol";
/**
* @title OFTCore
* @dev Abstract contract for the OftChain (OFT) token.
*/
abstract contract OFTCore is IOFT, OApp, OAppPreCrimeSimulator, OAppOptionsType3 {
using OFTMsgCodec for bytes;
using OFTMsgCodec for bytes32;
// @notice Provides a conversion rate when swapping between denominations of SD and LD
// - shareDecimals == SD == shared Decimals
// - localDecimals == LD == local decimals
// @dev Considers that tokens have different decimal amounts on various chains.
// @dev eg.
// For a token
// - locally with 4 decimals --> 1.2345 => uint(12345)
// - remotely with 2 decimals --> 1.23 => uint(123)
// - The conversion rate would be 10 ** (4 - 2) = 100
// @dev If you want to send 1.2345 -> (uint 12345), you CANNOT represent that value on the remote,
// you can only display 1.23 -> uint(123).
// @dev To preserve the dust that would otherwise be lost on that conversion,
// we need to unify a denomination that can be represented on ALL chains inside of the OFT mesh
uint256 public immutable decimalConversionRate;
// @notice Msg types that are used to identify the various OFT operations.
// @dev This can be extended in child contracts for non-default oft operations
// @dev These values are used in things like combineOptions() in OAppOptionsType3.sol.
uint16 public constant SEND = 1;
uint16 public constant SEND_AND_CALL = 2;
// Address of an optional contract to inspect both 'message' and 'options'
address public msgInspector;
event MsgInspectorSet(address inspector);
/**
* @dev Constructor.
* @param _localDecimals The decimals of the token on the local chain (this chain).
* @param _endpoint The address of the LayerZero endpoint.
* @param _delegate The delegate capable of making OApp configurations inside of the endpoint.
*/
constructor(uint8 _localDecimals, address _endpoint, address _delegate) OApp(_endpoint, _delegate) {
if (_localDecimals < sharedDecimals()) revert InvalidLocalDecimals();
decimalConversionRate = 10 ** (_localDecimals - sharedDecimals());
}
/**
* @notice Retrieves interfaceID and the version of the OFT.
* @return interfaceId The interface ID.
* @return version The version.
*
* @dev interfaceId: This specific interface ID is '0x02e49c2c'.
* @dev version: Indicates a cross-chain compatible msg encoding with other OFTs.
* @dev If a new feature is added to the OFT cross-chain msg encoding, the version will be incremented.
* ie. localOFT version(x,1) CAN send messages to remoteOFT version(x,1)
*/
function oftVersion() external pure virtual returns (bytes4 interfaceId, uint64 version) {
return (type(IOFT).interfaceId, 1);
}
/**
* @dev Retrieves the shared decimals of the OFT.
* @return The shared decimals of the OFT.
*
* @dev Sets an implicit cap on the amount of tokens, over uint64.max() will need some sort of outbound cap / totalSupply cap
* Lowest common decimal denominator between chains.
* Defaults to 6 decimal places to provide up to 18,446,744,073,709.551615 units (max uint64).
* For tokens exceeding this totalSupply(), they will need to override the sharedDecimals function with something smaller.
* ie. 4 sharedDecimals would be 1,844,674,407,370,955.1615
*/
function sharedDecimals() public view virtual returns (uint8) {
return 6;
}
/**
* @dev Sets the message inspector address for the OFT.
* @param _msgInspector The address of the message inspector.
*
* @dev This is an optional contract that can be used to inspect both 'message' and 'options'.
* @dev Set it to address(0) to disable it, or set it to a contract address to enable it.
*/
function setMsgInspector(address _msgInspector) public virtual onlyOwner {
msgInspector = _msgInspector;
emit MsgInspectorSet(_msgInspector);
}
/**
* @notice Provides a quote for OFT-related operations.
* @param _sendParam The parameters for the send operation.
* @return oftLimit The OFT limit information.
* @return oftFeeDetails The details of OFT fees.
* @return oftReceipt The OFT receipt information.
*/
function quoteOFT(
SendParam calldata _sendParam
)
external
view
virtual
returns (OFTLimit memory oftLimit, OFTFeeDetail[] memory oftFeeDetails, OFTReceipt memory oftReceipt)
{
uint256 minAmountLD = 0; // Unused in the default implementation.
uint256 maxAmountLD = type(uint64).max; // Unused in the default implementation.
oftLimit = OFTLimit(minAmountLD, maxAmountLD);
// Unused in the default implementation; reserved for future complex fee details.
oftFeeDetails = new OFTFeeDetail[](0);
// @dev This is the same as the send() operation, but without the actual send.
// - amountSentLD is the amount in local decimals that would be sent from the sender.
// - amountReceivedLD is the amount in local decimals that will be credited to the recipient on the remote OFT instance.
// @dev The amountSentLD MIGHT not equal the amount the user actually receives. HOWEVER, the default does.
(uint256 amountSentLD, uint256 amountReceivedLD) = _debitView(
_sendParam.amountLD,
_sendParam.minAmountLD,
_sendParam.dstEid
);
oftReceipt = OFTReceipt(amountSentLD, amountReceivedLD);
}
/**
* @notice Provides a quote for the send() operation.
* @param _sendParam The parameters for the send() operation.
* @param _payInLzToken Flag indicating whether the caller is paying in the LZ token.
* @return msgFee The calculated LayerZero messaging fee from the send() operation.
*
* @dev MessagingFee: LayerZero msg fee
* - nativeFee: The native fee.
* - lzTokenFee: The lzToken fee.
*/
function quoteSend(
SendParam calldata _sendParam,
bool _payInLzToken
) external view virtual returns (MessagingFee memory msgFee) {
// @dev mock the amount to receive, this is the same operation used in the send().
// The quote is as similar as possible to the actual send() operation.
(, uint256 amountReceivedLD) = _debitView(_sendParam.amountLD, _sendParam.minAmountLD, _sendParam.dstEid);
// @dev Builds the options and OFT message to quote in the endpoint.
(bytes memory message, bytes memory options) = _buildMsgAndOptions(_sendParam, amountReceivedLD);
// @dev Calculates the LayerZero fee for the send() operation.
return _quote(_sendParam.dstEid, message, options, _payInLzToken);
}
/**
* @dev Executes the send operation.
* @param _sendParam The parameters for the send operation.
* @param _fee The calculated fee for the send() operation.
* - nativeFee: The native fee.
* - lzTokenFee: The lzToken fee.
* @param _refundAddress The address to receive any excess funds.
* @return msgReceipt The receipt for the send operation.
* @return oftReceipt The OFT receipt information.
*
* @dev MessagingReceipt: LayerZero msg receipt
* - guid: The unique identifier for the sent message.
* - nonce: The nonce of the sent message.
* - fee: The LayerZero fee incurred for the message.
*/
function send(
SendParam calldata _sendParam,
MessagingFee calldata _fee,
address _refundAddress
) external payable virtual returns (MessagingReceipt memory msgReceipt, OFTReceipt memory oftReceipt) {
// @dev Applies the token transfers regarding this send() operation.
// - amountSentLD is the amount in local decimals that was ACTUALLY sent/debited from the sender.
// - amountReceivedLD is the amount in local decimals that will be received/credited to the recipient on the remote OFT instance.
(uint256 amountSentLD, uint256 amountReceivedLD) = _debit(
msg.sender,
_sendParam.amountLD,
_sendParam.minAmountLD,
_sendParam.dstEid
);
// @dev Builds the options and OFT message to quote in the endpoint.
(bytes memory message, bytes memory options) = _buildMsgAndOptions(_sendParam, amountReceivedLD);
// @dev Sends the message to the LayerZero endpoint and returns the LayerZero msg receipt.
msgReceipt = _lzSend(_sendParam.dstEid, message, options, _fee, _refundAddress);
// @dev Formulate the OFT receipt.
oftReceipt = OFTReceipt(amountSentLD, amountReceivedLD);
emit OFTSent(msgReceipt.guid, _sendParam.dstEid, msg.sender, amountSentLD, amountReceivedLD);
}
/**
* @dev Internal function to build the message and options.
* @param _sendParam The parameters for the send() operation.
* @param _amountLD The amount in local decimals.
* @return message The encoded message.
* @return options The encoded options.
*/
function _buildMsgAndOptions(
SendParam calldata _sendParam,
uint256 _amountLD
) internal view virtual returns (bytes memory message, bytes memory options) {
bool hasCompose;
// @dev This generated message has the msg.sender encoded into the payload so the remote knows who the caller is.
(message, hasCompose) = OFTMsgCodec.encode(
_sendParam.to,
_toSD(_amountLD),
// @dev Must be include a non empty bytes if you want to compose, EVEN if you dont need it on the remote.
// EVEN if you dont require an arbitrary payload to be sent... eg. '0x01'
_sendParam.composeMsg
);
// @dev Change the msg type depending if its composed or not.
uint16 msgType = hasCompose ? SEND_AND_CALL : SEND;
// @dev Combine the callers _extraOptions with the enforced options via the OAppOptionsType3.
options = combineOptions(_sendParam.dstEid, msgType, _sendParam.extraOptions);
// @dev Optionally inspect the message and options depending if the OApp owner has set a msg inspector.
// @dev If it fails inspection, needs to revert in the implementation. ie. does not rely on return boolean
if (msgInspector != address(0)) IOAppMsgInspector(msgInspector).inspect(message, options);
}
/**
* @dev Internal function to handle the receive on the LayerZero endpoint.
* @param _origin The origin information.
* - srcEid: The source chain endpoint ID.
* - sender: The sender address from the src chain.
* - nonce: The nonce of the LayerZero message.
* @param _guid The unique identifier for the received LayerZero message.
* @param _message The encoded message.
* @dev _executor The address of the executor.
* @dev _extraData Additional data.
*/
function _lzReceive(
Origin calldata _origin,
bytes32 _guid,
bytes calldata _message,
address /*_executor*/, // @dev unused in the default implementation.
bytes calldata /*_extraData*/ // @dev unused in the default implementation.
) internal virtual override {
// @dev The src sending chain doesnt know the address length on this chain (potentially non-evm)
// Thus everything is bytes32() encoded in flight.
address toAddress = _message.sendTo().bytes32ToAddress();
// @dev Credit the amountLD to the recipient and return the ACTUAL amount the recipient received in local decimals
uint256 amountReceivedLD = _credit(toAddress, _toLD(_message.amountSD()), _origin.srcEid);
if (_message.isComposed()) {
// @dev Proprietary composeMsg format for the OFT.
bytes memory composeMsg = OFTComposeMsgCodec.encode(
_origin.nonce,
_origin.srcEid,
amountReceivedLD,
_message.composeMsg()
);
// @dev Stores the lzCompose payload that will be executed in a separate tx.
// Standardizes functionality for executing arbitrary contract invocation on some non-evm chains.
// @dev The off-chain executor will listen and process the msg based on the src-chain-callers compose options passed.
// @dev The index is used when a OApp needs to compose multiple msgs on lzReceive.
// For default OFT implementation there is only 1 compose msg per lzReceive, thus its always 0.
endpoint.sendCompose(toAddress, _guid, 0 /* the index of the composed message*/, composeMsg);
}
emit OFTReceived(_guid, _origin.srcEid, toAddress, amountReceivedLD);
}
/**
* @dev Internal function to handle the OAppPreCrimeSimulator simulated receive.
* @param _origin The origin information.
* - srcEid: The source chain endpoint ID.
* - sender: The sender address from the src chain.
* - nonce: The nonce of the LayerZero message.
* @param _guid The unique identifier for the received LayerZero message.
* @param _message The LayerZero message.
* @param _executor The address of the off-chain executor.
* @param _extraData Arbitrary data passed by the msg executor.
*
* @dev Enables the preCrime simulator to mock sending lzReceive() messages,
* routes the msg down from the OAppPreCrimeSimulator, and back up to the OAppReceiver.
*/
function _lzReceiveSimulate(
Origin calldata _origin,
bytes32 _guid,
bytes calldata _message,
address _executor,
bytes calldata _extraData
) internal virtual override {
_lzReceive(_origin, _guid, _message, _executor, _extraData);
}
/**
* @dev Check if the peer is considered 'trusted' by the OApp.
* @param _eid The endpoint ID to check.
* @param _peer The peer to check.
* @return Whether the peer passed is considered 'trusted' by the OApp.
*
* @dev Enables OAppPreCrimeSimulator to check whether a potential Inbound Packet is from a trusted source.
*/
function isPeer(uint32 _eid, bytes32 _peer) public view virtual override returns (bool) {
return peers[_eid] == _peer;
}
/**
* @dev Internal function to remove dust from the given local decimal amount.
* @param _amountLD The amount in local decimals.
* @return amountLD The amount after removing dust.
*
* @dev Prevents the loss of dust when moving amounts between chains with different decimals.
* @dev eg. uint(123) with a conversion rate of 100 becomes uint(100).
*/
function _removeDust(uint256 _amountLD) internal view virtual returns (uint256 amountLD) {
return (_amountLD / decimalConversionRate) * decimalConversionRate;
}
/**
* @dev Internal function to convert an amount from shared decimals into local decimals.
* @param _amountSD The amount in shared decimals.
* @return amountLD The amount in local decimals.
*/
function _toLD(uint64 _amountSD) internal view virtual returns (uint256 amountLD) {
return _amountSD * decimalConversionRate;
}
/**
* @dev Internal function to convert an amount from local decimals into shared decimals.
* @param _amountLD The amount in local decimals.
* @return amountSD The amount in shared decimals.
*/
function _toSD(uint256 _amountLD) internal view virtual returns (uint64 amountSD) {
return uint64(_amountLD / decimalConversionRate);
}
/**
* @dev Internal function to mock the amount mutation from a OFT debit() operation.
* @param _amountLD The amount to send in local decimals.
* @param _minAmountLD The minimum amount to send in local decimals.
* @dev _dstEid The destination endpoint ID.
* @return amountSentLD The amount sent, in local decimals.
* @return amountReceivedLD The amount to be received on the remote chain, in local decimals.
*
* @dev This is where things like fees would be calculated and deducted from the amount to be received on the remote.
*/
function _debitView(
uint256 _amountLD,
uint256 _minAmountLD,
uint32 /*_dstEid*/
) internal view virtual returns (uint256 amountSentLD, uint256 amountReceivedLD) {
// @dev Remove the dust so nothing is lost on the conversion between chains with different decimals for the token.
amountSentLD = _removeDust(_amountLD);
// @dev The amount to send is the same as amount received in the default implementation.
amountReceivedLD = amountSentLD;
// @dev Check for slippage.
if (amountReceivedLD < _minAmountLD) {
revert SlippageExceeded(amountReceivedLD, _minAmountLD);
}
}
/**
* @dev Internal function to perform a debit operation.
* @param _from The address to debit.
* @param _amountLD The amount to send in local decimals.
* @param _minAmountLD The minimum amount to send in local decimals.
* @param _dstEid The destination endpoint ID.
* @return amountSentLD The amount sent in local decimals.
* @return amountReceivedLD The amount received in local decimals on the remote.
*
* @dev Defined here but are intended to be overriden depending on the OFT implementation.
* @dev Depending on OFT implementation the _amountLD could differ from the amountReceivedLD.
*/
function _debit(
address _from,
uint256 _amountLD,
uint256 _minAmountLD,
uint32 _dstEid
) internal virtual returns (uint256 amountSentLD, uint256 amountReceivedLD);
/**
* @dev Internal function to perform a credit operation.
* @param _to The address to credit.
* @param _amountLD The amount to credit in local decimals.
* @param _srcEid The source endpoint ID.
* @return amountReceivedLD The amount ACTUALLY received in local decimals.
*
* @dev Defined here but are intended to be overriden depending on the OFT implementation.
* @dev Depending on OFT implementation the _amountLD could differ from the amountReceivedLD.
*/
function _credit(
address _to,
uint256 _amountLD,
uint32 _srcEid
) internal virtual returns (uint256 amountReceivedLD);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
// @dev Import the Origin so it's exposed to OAppPreCrimeSimulator implementers.
// solhint-disable-next-line no-unused-import
import { InboundPacket, Origin } from "../libs/Packet.sol";
/**
* @title IOAppPreCrimeSimulator Interface
* @dev Interface for the preCrime simulation functionality in an OApp.
*/
interface IOAppPreCrimeSimulator {
// @dev simulation result used in PreCrime implementation
error SimulationResult(bytes result);
error OnlySelf();
/**
* @dev Emitted when the preCrime contract address is set.
* @param preCrimeAddress The address of the preCrime contract.
*/
event PreCrimeSet(address preCrimeAddress);
/**
* @dev Retrieves the address of the preCrime contract implementation.
* @return The address of the preCrime contract.
*/
function preCrime() external view returns (address);
/**
* @dev Retrieves the address of the OApp contract.
* @return The address of the OApp contract.
*/
function oApp() external view returns (address);
/**
* @dev Sets the preCrime contract address.
* @param _preCrime The address of the preCrime contract.
*/
function setPreCrime(address _preCrime) external;
/**
* @dev Mocks receiving a packet, then reverts with a series of data to infer the state/result.
* @param _packets An array of LayerZero InboundPacket objects representing received packets.
*/
function lzReceiveAndRevert(InboundPacket[] calldata _packets) external payable;
/**
* @dev checks if the specified peer is considered 'trusted' by the OApp.
* @param _eid The endpoint Id to check.
* @param _peer The peer to check.
* @return Whether the peer passed is considered 'trusted' by the OApp.
*/
function isPeer(uint32 _eid, bytes32 _peer) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
struct PreCrimePeer {
uint32 eid;
bytes32 preCrime;
bytes32 oApp;
}
// TODO not done yet
interface IPreCrime {
error OnlyOffChain();
// for simulate()
error PacketOversize(uint256 max, uint256 actual);
error PacketUnsorted();
error SimulationFailed(bytes reason);
// for preCrime()
error SimulationResultNotFound(uint32 eid);
error InvalidSimulationResult(uint32 eid, bytes reason);
error CrimeFound(bytes crime);
function getConfig(bytes[] calldata _packets, uint256[] calldata _packetMsgValues) external returns (bytes memory);
function simulate(
bytes[] calldata _packets,
uint256[] calldata _packetMsgValues
) external payable returns (bytes memory);
function buildSimulationResult() external view returns (bytes memory);
function preCrime(
bytes[] calldata _packets,
uint256[] calldata _packetMsgValues,
bytes[] calldata _simulations
) external;
function version() external view returns (uint64 major, uint8 minor);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { Origin } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol";
import { PacketV1Codec } from "@layerzerolabs/lz-evm-protocol-v2/contracts/messagelib/libs/PacketV1Codec.sol";
/**
* @title InboundPacket
* @dev Structure representing an inbound packet received by the contract.
*/
struct InboundPacket {
Origin origin; // Origin information of the packet.
uint32 dstEid; // Destination endpointId of the packet.
address receiver; // Receiver address for the packet.
bytes32 guid; // Unique identifier of the packet.
uint256 value; // msg.value of the packet.
address executor; // Executor address for the packet.
bytes message; // Message payload of the packet.
bytes extraData; // Additional arbitrary data for the packet.
}
/**
* @title PacketDecoder
* @dev Library for decoding LayerZero packets.
*/
library PacketDecoder {
using PacketV1Codec for bytes;
/**
* @dev Decode an inbound packet from the given packet data.
* @param _packet The packet data to decode.
* @return packet An InboundPacket struct representing the decoded packet.
*/
function decode(bytes calldata _packet) internal pure returns (InboundPacket memory packet) {
packet.origin = Origin(_packet.srcEid(), _packet.sender(), _packet.nonce());
packet.dstEid = _packet.dstEid();
packet.receiver = _packet.receiverB20();
packet.guid = _packet.guid();
packet.message = _packet.message();
}
/**
* @dev Decode multiple inbound packets from the given packet data and associated message values.
* @param _packets An array of packet data to decode.
* @param _packetMsgValues An array of associated message values for each packet.
* @return packets An array of InboundPacket structs representing the decoded packets.
*/
function decode(
bytes[] calldata _packets,
uint256[] memory _packetMsgValues
) internal pure returns (InboundPacket[] memory packets) {
packets = new InboundPacket[](_packets.length);
for (uint256 i = 0; i < _packets.length; i++) {
bytes calldata packet = _packets[i];
packets[i] = PacketDecoder.decode(packet);
// @dev Allows the verifier to specify the msg.value that gets passed in lzReceive.
packets[i].value = _packetMsgValues[i];
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { IPreCrime } from "./interfaces/IPreCrime.sol";
import { IOAppPreCrimeSimulator, InboundPacket, Origin } from "./interfaces/IOAppPreCrimeSimulator.sol";
/**
* @title OAppPreCrimeSimulator
* @dev Abstract contract serving as the base for preCrime simulation functionality in an OApp.
*/
abstract contract OAppPreCrimeSimulator is IOAppPreCrimeSimulator, Ownable {
// The address of the preCrime implementation.
address public preCrime;
/**
* @dev Retrieves the address of the OApp contract.
* @return The address of the OApp contract.
*
* @dev The simulator contract is the base contract for the OApp by default.
* @dev If the simulator is a separate contract, override this function.
*/
function oApp() external view virtual returns (address) {
return address(this);
}
/**
* @dev Sets the preCrime contract address.
* @param _preCrime The address of the preCrime contract.
*/
function setPreCrime(address _preCrime) public virtual onlyOwner {
preCrime = _preCrime;
emit PreCrimeSet(_preCrime);
}
/**
* @dev Interface for pre-crime simulations. Always reverts at the end with the simulation results.
* @param _packets An array of InboundPacket objects representing received packets to be delivered.
*
* @dev WARNING: MUST revert at the end with the simulation results.
* @dev Gives the preCrime implementation the ability to mock sending packets to the lzReceive function,
* WITHOUT actually executing them.
*/
function lzReceiveAndRevert(InboundPacket[] calldata _packets) public payable virtual {
for (uint256 i = 0; i < _packets.length; i++) {
InboundPacket calldata packet = _packets[i];
// Ignore packets that are not from trusted peers.
if (!isPeer(packet.origin.srcEid, packet.origin.sender)) continue;
// @dev Because a verifier is calling this function, it doesnt have access to executor params:
// - address _executor
// - bytes calldata _extraData
// preCrime will NOT work for OApps that rely on these two parameters inside of their _lzReceive().
// They are instead stubbed to default values, address(0) and bytes("")
// @dev Calling this.lzReceiveSimulate removes ability for assembly return 0 callstack exit,
// which would cause the revert to be ignored.
this.lzReceiveSimulate{ value: packet.value }(
packet.origin,
packet.guid,
packet.message,
packet.executor,
packet.extraData
);
}
// @dev Revert with the simulation results. msg.sender must implement IPreCrime.buildSimulationResult().
revert SimulationResult(IPreCrime(msg.sender).buildSimulationResult());
}
/**
* @dev Is effectively an internal function because msg.sender must be address(this).
* Allows resetting the call stack for 'internal' calls.
* @param _origin The origin information containing the source endpoint and sender address.
* - srcEid: The source chain endpoint ID.
* - sender: The sender address on the src chain.
* - nonce: The nonce of the message.
* @param _guid The unique identifier of the packet.
* @param _message The message payload of the packet.
* @param _executor The executor address for the packet.
* @param _extraData Additional data for the packet.
*/
function lzReceiveSimulate(
Origin calldata _origin,
bytes32 _guid,
bytes calldata _message,
address _executor,
bytes calldata _extraData
) external payable virtual {
// @dev Ensure ONLY can be called 'internally'.
if (msg.sender != address(this)) revert OnlySelf();
_lzReceiveSimulate(_origin, _guid, _message, _executor, _extraData);
}
/**
* @dev Internal function to handle the OAppPreCrimeSimulator simulated receive.
* @param _origin The origin information.
* - srcEid: The source chain endpoint ID.
* - sender: The sender address from the src chain.
* - nonce: The nonce of the LayerZero message.
* @param _guid The GUID of the LayerZero message.
* @param _message The LayerZero message.
* @param _executor The address of the off-chain executor.
* @param _extraData Arbitrary data passed by the msg executor.
*
* @dev Enables the preCrime simulator to mock sending lzReceive() messages,
* routes the msg down from the OAppPreCrimeSimulator, and back up to the OAppReceiver.
*/
function _lzReceiveSimulate(
Origin calldata _origin,
bytes32 _guid,
bytes calldata _message,
address _executor,
bytes calldata _extraData
) internal virtual;
/**
* @dev checks if the specified peer is considered 'trusted' by the OApp.
* @param _eid The endpoint Id to check.
* @param _peer The peer to check.
* @return Whether the peer passed is considered 'trusted' by the OApp.
*/
function isPeer(uint32 _eid, bytes32 _peer) public view virtual returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
/**
* @title ILayerZeroComposer
*/
interface ILayerZeroComposer {
/**
* @notice Composes a LayerZero message from an OApp.
* @param _from The address initiating the composition, typically the OApp where the lzReceive was called.
* @param _guid The unique identifier for the corresponding LayerZero src/dst tx.
* @param _message The composed message payload in bytes. NOT necessarily the same payload passed via lzReceive.
* @param _executor The address of the executor for the composed message.
* @param _extraData Additional arbitrary data in bytes passed by the entity who executes the lzCompose.
*/
function lzCompose(
address _from,
bytes32 _guid,
bytes calldata _message,
address _executor,
bytes calldata _extraData
) external payable;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
import { IMessageLibManager } from "./IMessageLibManager.sol";
import { IMessagingComposer } from "./IMessagingComposer.sol";
import { IMessagingChannel } from "./IMessagingChannel.sol";
import { IMessagingContext } from "./IMessagingContext.sol";
struct MessagingParams {
uint32 dstEid;
bytes32 receiver;
bytes message;
bytes options;
bool payInLzToken;
}
struct MessagingReceipt {
bytes32 guid;
uint64 nonce;
MessagingFee fee;
}
struct MessagingFee {
uint256 nativeFee;
uint256 lzTokenFee;
}
struct Origin {
uint32 srcEid;
bytes32 sender;
uint64 nonce;
}
interface ILayerZeroEndpointV2 is IMessageLibManager, IMessagingComposer, IMessagingChannel, IMessagingContext {
event PacketSent(bytes encodedPayload, bytes options, address sendLibrary);
event PacketVerified(Origin origin, address receiver, bytes32 payloadHash);
event PacketDelivered(Origin origin, address receiver);
event LzReceiveAlert(
address indexed receiver,
address indexed executor,
Origin origin,
bytes32 guid,
uint256 gas,
uint256 value,
bytes message,
bytes extraData,
bytes reason
);
event LzTokenSet(address token);
event DelegateSet(address sender, address delegate);
function quote(MessagingParams calldata _params, address _sender) external view returns (MessagingFee memory);
function send(
MessagingParams calldata _params,
address _refundAddress
) external payable returns (MessagingReceipt memory);
function verify(Origin calldata _origin, address _receiver, bytes32 _payloadHash) external;
function verifiable(Origin calldata _origin, address _receiver) external view returns (bool);
function initializable(Origin calldata _origin, address _receiver) external view returns (bool);
function lzReceive(
Origin calldata _origin,
address _receiver,
bytes32 _guid,
bytes calldata _message,
bytes calldata _extraData
) external payable;
// oapp can burn messages partially by calling this function with its own business logic if messages are verified in order
function clear(address _oapp, Origin calldata _origin, bytes32 _guid, bytes calldata _message) external;
function setLzToken(address _lzToken) external;
function lzToken() external view returns (address);
function nativeToken() external view returns (address);
function setDelegate(address _delegate) external;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
import { Origin } from "./ILayerZeroEndpointV2.sol";
interface ILayerZeroReceiver {
function allowInitializePath(Origin calldata _origin) external view returns (bool);
function nextNonce(uint32 _eid, bytes32 _sender) external view returns (uint64);
function lzReceive(
Origin calldata _origin,
bytes32 _guid,
bytes calldata _message,
address _executor,
bytes calldata _extraData
) external payable;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
import { IERC165 } from "@openzeppelin/contracts/utils/introspection/IERC165.sol";
import { SetConfigParam } from "./IMessageLibManager.sol";
enum MessageLibType {
Send,
Receive,
SendAndReceive
}
interface IMessageLib is IERC165 {
function setConfig(address _oapp, SetConfigParam[] calldata _config) external;
function getConfig(uint32 _eid, address _oapp, uint32 _configType) external view returns (bytes memory config);
function isSupportedEid(uint32 _eid) external view returns (bool);
// message libs of same major version are compatible
function version() external view returns (uint64 major, uint8 minor, uint8 endpointVersion);
function messageLibType() external view returns (MessageLibType);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
struct SetConfigParam {
uint32 eid;
uint32 configType;
bytes config;
}
interface IMessageLibManager {
struct Timeout {
address lib;
uint256 expiry;
}
event LibraryRegistered(address newLib);
event DefaultSendLibrarySet(uint32 eid, address newLib);
event DefaultReceiveLibrarySet(uint32 eid, address newLib);
event DefaultReceiveLibraryTimeoutSet(uint32 eid, address oldLib, uint256 expiry);
event SendLibrarySet(address sender, uint32 eid, address newLib);
event ReceiveLibrarySet(address receiver, uint32 eid, address newLib);
event ReceiveLibraryTimeoutSet(address receiver, uint32 eid, address oldLib, uint256 timeout);
function registerLibrary(address _lib) external;
function isRegisteredLibrary(address _lib) external view returns (bool);
function getRegisteredLibraries() external view returns (address[] memory);
function setDefaultSendLibrary(uint32 _eid, address _newLib) external;
function defaultSendLibrary(uint32 _eid) external view returns (address);
function setDefaultReceiveLibrary(uint32 _eid, address _newLib, uint256 _gracePeriod) external;
function defaultReceiveLibrary(uint32 _eid) external view returns (address);
function setDefaultReceiveLibraryTimeout(uint32 _eid, address _lib, uint256 _expiry) external;
function defaultReceiveLibraryTimeout(uint32 _eid) external view returns (address lib, uint256 expiry);
function isSupportedEid(uint32 _eid) external view returns (bool);
function isValidReceiveLibrary(address _receiver, uint32 _eid, address _lib) external view returns (bool);
/// ------------------- OApp interfaces -------------------
function setSendLibrary(address _oapp, uint32 _eid, address _newLib) external;
function getSendLibrary(address _sender, uint32 _eid) external view returns (address lib);
function isDefaultSendLibrary(address _sender, uint32 _eid) external view returns (bool);
function setReceiveLibrary(address _oapp, uint32 _eid, address _newLib, uint256 _gracePeriod) external;
function getReceiveLibrary(address _receiver, uint32 _eid) external view returns (address lib, bool isDefault);
function setReceiveLibraryTimeout(address _oapp, uint32 _eid, address _lib, uint256 _expiry) external;
function receiveLibraryTimeout(address _receiver, uint32 _eid) external view returns (address lib, uint256 expiry);
function setConfig(address _oapp, address _lib, SetConfigParam[] calldata _params) external;
function getConfig(
address _oapp,
address _lib,
uint32 _eid,
uint32 _configType
) external view returns (bytes memory config);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
interface IMessagingChannel {
event InboundNonceSkipped(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce);
event PacketNilified(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce, bytes32 payloadHash);
event PacketBurnt(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce, bytes32 payloadHash);
function eid() external view returns (uint32);
// this is an emergency function if a message cannot be verified for some reasons
// required to provide _nextNonce to avoid race condition
function skip(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce) external;
function nilify(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce, bytes32 _payloadHash) external;
function burn(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce, bytes32 _payloadHash) external;
function nextGuid(address _sender, uint32 _dstEid, bytes32 _receiver) external view returns (bytes32);
function inboundNonce(address _receiver, uint32 _srcEid, bytes32 _sender) external view returns (uint64);
function outboundNonce(address _sender, uint32 _dstEid, bytes32 _receiver) external view returns (uint64);
function inboundPayloadHash(
address _receiver,
uint32 _srcEid,
bytes32 _sender,
uint64 _nonce
) external view returns (bytes32);
function lazyInboundNonce(address _receiver, uint32 _srcEid, bytes32 _sender) external view returns (uint64);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
interface IMessagingComposer {
event ComposeSent(address from, address to, bytes32 guid, uint16 index, bytes message);
event ComposeDelivered(address from, address to, bytes32 guid, uint16 index);
event LzComposeAlert(
address indexed from,
address indexed to,
address indexed executor,
bytes32 guid,
uint16 index,
uint256 gas,
uint256 value,
bytes message,
bytes extraData,
bytes reason
);
function composeQueue(
address _from,
address _to,
bytes32 _guid,
uint16 _index
) external view returns (bytes32 messageHash);
function sendCompose(address _to, bytes32 _guid, uint16 _index, bytes calldata _message) external;
function lzCompose(
address _from,
address _to,
bytes32 _guid,
uint16 _index,
bytes calldata _message,
bytes calldata _extraData
) external payable;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
interface IMessagingContext {
function isSendingMessage() external view returns (bool);
function getSendContext() external view returns (uint32 dstEid, address sender);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
import { MessagingFee } from "./ILayerZeroEndpointV2.sol";
import { IMessageLib } from "./IMessageLib.sol";
struct Packet {
uint64 nonce;
uint32 srcEid;
address sender;
uint32 dstEid;
bytes32 receiver;
bytes32 guid;
bytes message;
}
interface ISendLib is IMessageLib {
function send(
Packet calldata _packet,
bytes calldata _options,
bool _payInLzToken
) external returns (MessagingFee memory, bytes memory encodedPacket);
function quote(
Packet calldata _packet,
bytes calldata _options,
bool _payInLzToken
) external view returns (MessagingFee memory);
function setTreasury(address _treasury) external;
function withdrawFee(address _to, uint256 _amount) external;
function withdrawLzTokenFee(address _lzToken, address _to, uint256 _amount) external;
}
// SPDX-License-Identifier: LZBL-1.2
pragma solidity ^0.8.20;
library AddressCast {
error AddressCast_InvalidSizeForAddress();
error AddressCast_InvalidAddress();
function toBytes32(bytes calldata _addressBytes) internal pure returns (bytes32 result) {
if (_addressBytes.length > 32) revert AddressCast_InvalidAddress();
result = bytes32(_addressBytes);
unchecked {
uint256 offset = 32 - _addressBytes.length;
result = result >> (offset * 8);
}
}
function toBytes32(address _address) internal pure returns (bytes32 result) {
result = bytes32(uint256(uint160(_address)));
}
function toBytes(bytes32 _addressBytes32, uint256 _size) internal pure returns (bytes memory result) {
if (_size == 0 || _size > 32) revert AddressCast_InvalidSizeForAddress();
result = new bytes(_size);
unchecked {
uint256 offset = 256 - _size * 8;
assembly {
mstore(add(result, 32), shl(offset, _addressBytes32))
}
}
}
function toAddress(bytes32 _addressBytes32) internal pure returns (address result) {
result = address(uint160(uint256(_addressBytes32)));
}
function toAddress(bytes calldata _addressBytes) internal pure returns (address result) {
if (_addressBytes.length != 20) revert AddressCast_InvalidAddress();
result = address(bytes20(_addressBytes));
}
}
// SPDX-License-Identifier: LZBL-1.2
pragma solidity ^0.8.20;
library CalldataBytesLib {
function toU8(bytes calldata _bytes, uint256 _start) internal pure returns (uint8) {
return uint8(_bytes[_start]);
}
function toU16(bytes calldata _bytes, uint256 _start) internal pure returns (uint16) {
unchecked {
uint256 end = _start + 2;
return uint16(bytes2(_bytes[_start:end]));
}
}
function toU32(bytes calldata _bytes, uint256 _start) internal pure returns (uint32) {
unchecked {
uint256 end = _start + 4;
return uint32(bytes4(_bytes[_start:end]));
}
}
function toU64(bytes calldata _bytes, uint256 _start) internal pure returns (uint64) {
unchecked {
uint256 end = _start + 8;
return uint64(bytes8(_bytes[_start:end]));
}
}
function toU128(bytes calldata _bytes, uint256 _start) internal pure returns (uint128) {
unchecked {
uint256 end = _start + 16;
return uint128(bytes16(_bytes[_start:end]));
}
}
function toU256(bytes calldata _bytes, uint256 _start) internal pure returns (uint256) {
unchecked {
uint256 end = _start + 32;
return uint256(bytes32(_bytes[_start:end]));
}
}
function toAddr(bytes calldata _bytes, uint256 _start) internal pure returns (address) {
unchecked {
uint256 end = _start + 20;
return address(bytes20(_bytes[_start:end]));
}
}
function toB32(bytes calldata _bytes, uint256 _start) internal pure returns (bytes32) {
unchecked {
uint256 end = _start + 32;
return bytes32(_bytes[_start:end]);
}
}
}
// SPDX-License-Identifier: MIT
// modified from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/structs/BitMaps.sol
pragma solidity ^0.8.20;
type BitMap256 is uint256;
using BitMaps for BitMap256 global;
library BitMaps {
/**
* @dev Returns whether the bit at `index` is set.
*/
function get(BitMap256 bitmap, uint8 index) internal pure returns (bool) {
uint256 mask = 1 << index;
return BitMap256.unwrap(bitmap) & mask != 0;
}
/**
* @dev Sets the bit at `index`.
*/
function set(BitMap256 bitmap, uint8 index) internal pure returns (BitMap256) {
uint256 mask = 1 << index;
return BitMap256.wrap(BitMap256.unwrap(bitmap) | mask);
}
}
// SPDX-License-Identifier: LZBL-1.2
pragma solidity ^0.8.20;
import { CalldataBytesLib } from "../../libs/CalldataBytesLib.sol";
library ExecutorOptions {
using CalldataBytesLib for bytes;
uint8 internal constant WORKER_ID = 1;
uint8 internal constant OPTION_TYPE_LZRECEIVE = 1;
uint8 internal constant OPTION_TYPE_NATIVE_DROP = 2;
uint8 internal constant OPTION_TYPE_LZCOMPOSE = 3;
uint8 internal constant OPTION_TYPE_ORDERED_EXECUTION = 4;
error Executor_InvalidLzReceiveOption();
error Executor_InvalidNativeDropOption();
error Executor_InvalidLzComposeOption();
/// @dev decode the next executor option from the options starting from the specified cursor
/// @param _options [executor_id][executor_option][executor_id][executor_option]...
/// executor_option = [option_size][option_type][option]
/// option_size = len(option_type) + len(option)
/// executor_id: uint8, option_size: uint16, option_type: uint8, option: bytes
/// @param _cursor the cursor to start decoding from
/// @return optionType the type of the option
/// @return option the option of the executor
/// @return cursor the cursor to start decoding the next executor option
function nextExecutorOption(
bytes calldata _options,
uint256 _cursor
) internal pure returns (uint8 optionType, bytes calldata option, uint256 cursor) {
unchecked {
// skip worker id
cursor = _cursor + 1;
// read option size
uint16 size = _options.toU16(cursor);
cursor += 2;
// read option type
optionType = _options.toU8(cursor);
// startCursor and endCursor are used to slice the option from _options
uint256 startCursor = cursor + 1; // skip option type
uint256 endCursor = cursor + size;
option = _options[startCursor:endCursor];
cursor += size;
}
}
function decodeLzReceiveOption(bytes calldata _option) internal pure returns (uint128 gas, uint128 value) {
if (_option.length != 16 && _option.length != 32) revert Executor_InvalidLzReceiveOption();
gas = _option.toU128(0);
value = _option.length == 32 ? _option.toU128(16) : 0;
}
function decodeNativeDropOption(bytes calldata _option) internal pure returns (uint128 amount, bytes32 receiver) {
if (_option.length != 48) revert Executor_InvalidNativeDropOption();
amount = _option.toU128(0);
receiver = _option.toB32(16);
}
function decodeLzComposeOption(
bytes calldata _option
) internal pure returns (uint16 index, uint128 gas, uint128 value) {
if (_option.length != 18 && _option.length != 34) revert Executor_InvalidLzComposeOption();
index = _option.toU16(0);
gas = _option.toU128(2);
value = _option.length == 34 ? _option.toU128(18) : 0;
}
function encodeLzReceiveOption(uint128 _gas, uint128 _value) internal pure returns (bytes memory) {
return _value == 0 ? abi.encodePacked(_gas) : abi.encodePacked(_gas, _value);
}
function encodeNativeDropOption(uint128 _amount, bytes32 _receiver) internal pure returns (bytes memory) {
return abi.encodePacked(_amount, _receiver);
}
function encodeLzComposeOption(uint16 _index, uint128 _gas, uint128 _value) internal pure returns (bytes memory) {
return _value == 0 ? abi.encodePacked(_index, _gas) : abi.encodePacked(_index, _gas, _value);
}
}
// SPDX-License-Identifier: LZBL-1.2
pragma solidity ^0.8.20;
import { Packet } from "../../interfaces/ISendLib.sol";
import { AddressCast } from "../../libs/AddressCast.sol";
library PacketV1Codec {
using AddressCast for address;
using AddressCast for bytes32;
uint8 internal constant PACKET_VERSION = 1;
// header (version + nonce + path)
// version
uint256 private constant PACKET_VERSION_OFFSET = 0;
// nonce
uint256 private constant NONCE_OFFSET = 1;
// path
uint256 private constant SRC_EID_OFFSET = 9;
uint256 private constant SENDER_OFFSET = 13;
uint256 private constant DST_EID_OFFSET = 45;
uint256 private constant RECEIVER_OFFSET = 49;
// payload (guid + message)
uint256 private constant GUID_OFFSET = 81; // keccak256(nonce + path)
uint256 private constant MESSAGE_OFFSET = 113;
function encode(Packet memory _packet) internal pure returns (bytes memory encodedPacket) {
encodedPacket = abi.encodePacked(
PACKET_VERSION,
_packet.nonce,
_packet.srcEid,
_packet.sender.toBytes32(),
_packet.dstEid,
_packet.receiver,
_packet.guid,
_packet.message
);
}
function encodePacketHeader(Packet memory _packet) internal pure returns (bytes memory) {
return
abi.encodePacked(
PACKET_VERSION,
_packet.nonce,
_packet.srcEid,
_packet.sender.toBytes32(),
_packet.dstEid,
_packet.receiver
);
}
function encodePayload(Packet memory _packet) internal pure returns (bytes memory) {
return abi.encodePacked(_packet.guid, _packet.message);
}
function header(bytes calldata _packet) internal pure returns (bytes calldata) {
return _packet[0:GUID_OFFSET];
}
function version(bytes calldata _packet) internal pure returns (uint8) {
return uint8(bytes1(_packet[PACKET_VERSION_OFFSET:NONCE_OFFSET]));
}
function nonce(bytes calldata _packet) internal pure returns (uint64) {
return uint64(bytes8(_packet[NONCE_OFFSET:SRC_EID_OFFSET]));
}
function srcEid(bytes calldata _packet) internal pure returns (uint32) {
return uint32(bytes4(_packet[SRC_EID_OFFSET:SENDER_OFFSET]));
}
function sender(bytes calldata _packet) internal pure returns (bytes32) {
return bytes32(_packet[SENDER_OFFSET:DST_EID_OFFSET]);
}
function senderAddressB20(bytes calldata _packet) internal pure returns (address) {
return sender(_packet).toAddress();
}
function dstEid(bytes calldata _packet) internal pure returns (uint32) {
return uint32(bytes4(_packet[DST_EID_OFFSET:RECEIVER_OFFSET]));
}
function receiver(bytes calldata _packet) internal pure returns (bytes32) {
return bytes32(_packet[RECEIVER_OFFSET:GUID_OFFSET]);
}
function receiverB20(bytes calldata _packet) internal pure returns (address) {
return receiver(_packet).toAddress();
}
function guid(bytes calldata _packet) internal pure returns (bytes32) {
return bytes32(_packet[GUID_OFFSET:MESSAGE_OFFSET]);
}
function message(bytes calldata _packet) internal pure returns (bytes calldata) {
return bytes(_packet[MESSAGE_OFFSET:]);
}
function payload(bytes calldata _packet) internal pure returns (bytes calldata) {
return bytes(_packet[GUID_OFFSET:]);
}
function payloadHash(bytes calldata _packet) internal pure returns (bytes32) {
return keccak256(payload(_packet));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)
pragma solidity ^0.8.20;
import {Context} from "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* The initial owner is set to the address provided by the deployer. This can
* later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
/**
* @dev The caller account is not authorized to perform an operation.
*/
error OwnableUnauthorizedAccount(address account);
/**
* @dev The owner is not a valid owner account. (eg. `address(0)`)
*/
error OwnableInvalidOwner(address owner);
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the address provided by the deployer as the initial owner.
*/
constructor(address initialOwner) {
if (initialOwner == address(0)) {
revert OwnableInvalidOwner(address(0));
}
_transferOwnership(initialOwner);
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
if (owner() != _msgSender()) {
revert OwnableUnauthorizedAccount(_msgSender());
}
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby disabling any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
if (newOwner == address(0)) {
revert OwnableInvalidOwner(address(0));
}
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;
/**
* @dev Standard ERC20 Errors
* Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
*/
interface IERC20Errors {
/**
* @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
* @param balance Current balance for the interacting account.
* @param needed Minimum amount required to perform a transfer.
*/
error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);
/**
* @dev Indicates a failure with the token `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
*/
error ERC20InvalidSender(address sender);
/**
* @dev Indicates a failure with the token `receiver`. Used in transfers.
* @param receiver Address to which tokens are being transferred.
*/
error ERC20InvalidReceiver(address receiver);
/**
* @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
* @param spender Address that may be allowed to operate on tokens without being their owner.
* @param allowance Amount of tokens a `spender` is allowed to operate with.
* @param needed Minimum amount required to perform a transfer.
*/
error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);
/**
* @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
* @param approver Address initiating an approval operation.
*/
error ERC20InvalidApprover(address approver);
/**
* @dev Indicates a failure with the `spender` to be approved. Used in approvals.
* @param spender Address that may be allowed to operate on tokens without being their owner.
*/
error ERC20InvalidSpender(address spender);
}
/**
* @dev Standard ERC721 Errors
* Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
*/
interface IERC721Errors {
/**
* @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
* Used in balance queries.
* @param owner Address of the current owner of a token.
*/
error ERC721InvalidOwner(address owner);
/**
* @dev Indicates a `tokenId` whose `owner` is the zero address.
* @param tokenId Identifier number of a token.
*/
error ERC721NonexistentToken(uint256 tokenId);
/**
* @dev Indicates an error related to the ownership over a particular token. Used in transfers.
* @param sender Address whose tokens are being transferred.
* @param tokenId Identifier number of a token.
* @param owner Address of the current owner of a token.
*/
error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);
/**
* @dev Indicates a failure with the token `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
*/
error ERC721InvalidSender(address sender);
/**
* @dev Indicates a failure with the token `receiver`. Used in transfers.
* @param receiver Address to which tokens are being transferred.
*/
error ERC721InvalidReceiver(address receiver);
/**
* @dev Indicates a failure with the `operator`’s approval. Used in transfers.
* @param operator Address that may be allowed to operate on tokens without being their owner.
* @param tokenId Identifier number of a token.
*/
error ERC721InsufficientApproval(address operator, uint256 tokenId);
/**
* @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
* @param approver Address initiating an approval operation.
*/
error ERC721InvalidApprover(address approver);
/**
* @dev Indicates a failure with the `operator` to be approved. Used in approvals.
* @param operator Address that may be allowed to operate on tokens without being their owner.
*/
error ERC721InvalidOperator(address operator);
}
/**
* @dev Standard ERC1155 Errors
* Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
*/
interface IERC1155Errors {
/**
* @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
* @param balance Current balance for the interacting account.
* @param needed Minimum amount required to perform a transfer.
* @param tokenId Identifier number of a token.
*/
error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);
/**
* @dev Indicates a failure with the token `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
*/
error ERC1155InvalidSender(address sender);
/**
* @dev Indicates a failure with the token `receiver`. Used in transfers.
* @param receiver Address to which tokens are being transferred.
*/
error ERC1155InvalidReceiver(address receiver);
/**
* @dev Indicates a failure with the `operator`’s approval. Used in transfers.
* @param operator Address that may be allowed to operate on tokens without being their owner.
* @param owner Address of the current owner of a token.
*/
error ERC1155MissingApprovalForAll(address operator, address owner);
/**
* @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
* @param approver Address initiating an approval operation.
*/
error ERC1155InvalidApprover(address approver);
/**
* @dev Indicates a failure with the `operator` to be approved. Used in approvals.
* @param operator Address that may be allowed to operate on tokens without being their owner.
*/
error ERC1155InvalidOperator(address operator);
/**
* @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
* Used in batch transfers.
* @param idsLength Length of the array of token identifiers
* @param valuesLength Length of the array of token amounts
*/
error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.20;
import {IERC20} from "./IERC20.sol";
import {IERC20Metadata} from "./extensions/IERC20Metadata.sol";
import {Context} from "../../utils/Context.sol";
import {IERC20Errors} from "../../interfaces/draft-IERC6093.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* The default value of {decimals} is 18. To change this, you should override
* this function so it returns a different value.
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*/
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
mapping(address account => uint256) private _balances;
mapping(address account => mapping(address spender => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the default value returned by this function, unless
* it's overridden.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `value`.
*/
function transfer(address to, uint256 value) public virtual returns (bool) {
address owner = _msgSender();
_transfer(owner, to, value);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 value) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, value);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `value`.
* - the caller must have allowance for ``from``'s tokens of at least
* `value`.
*/
function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, value);
_transfer(from, to, value);
return true;
}
/**
* @dev Moves a `value` amount of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* NOTE: This function is not virtual, {_update} should be overridden instead.
*/
function _transfer(address from, address to, uint256 value) internal {
if (from == address(0)) {
revert ERC20InvalidSender(address(0));
}
if (to == address(0)) {
revert ERC20InvalidReceiver(address(0));
}
_update(from, to, value);
}
/**
* @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
* (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
* this function.
*
* Emits a {Transfer} event.
*/
function _update(address from, address to, uint256 value) internal virtual {
if (from == address(0)) {
// Overflow check required: The rest of the code assumes that totalSupply never overflows
_totalSupply += value;
} else {
uint256 fromBalance = _balances[from];
if (fromBalance < value) {
revert ERC20InsufficientBalance(from, fromBalance, value);
}
unchecked {
// Overflow not possible: value <= fromBalance <= totalSupply.
_balances[from] = fromBalance - value;
}
}
if (to == address(0)) {
unchecked {
// Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
_totalSupply -= value;
}
} else {
unchecked {
// Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
_balances[to] += value;
}
}
emit Transfer(from, to, value);
}
/**
* @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
* Relies on the `_update` mechanism
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* NOTE: This function is not virtual, {_update} should be overridden instead.
*/
function _mint(address account, uint256 value) internal {
if (account == address(0)) {
revert ERC20InvalidReceiver(address(0));
}
_update(address(0), account, value);
}
/**
* @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
* Relies on the `_update` mechanism.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* NOTE: This function is not virtual, {_update} should be overridden instead
*/
function _burn(address account, uint256 value) internal {
if (account == address(0)) {
revert ERC20InvalidSender(address(0));
}
_update(account, address(0), value);
}
/**
* @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*
* Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
*/
function _approve(address owner, address spender, uint256 value) internal {
_approve(owner, spender, value, true);
}
/**
* @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
*
* By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
* `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
* `Approval` event during `transferFrom` operations.
*
* Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
* true using the following override:
* ```
* function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
* super._approve(owner, spender, value, true);
* }
* ```
*
* Requirements are the same as {_approve}.
*/
function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
if (owner == address(0)) {
revert ERC20InvalidApprover(address(0));
}
if (spender == address(0)) {
revert ERC20InvalidSpender(address(0));
}
_allowances[owner][spender] = value;
if (emitEvent) {
emit Approval(owner, spender, value);
}
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `value`.
*
* Does not update the allowance value in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Does not emit an {Approval} event.
*/
function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
if (currentAllowance < value) {
revert ERC20InsufficientAllowance(spender, currentAllowance, value);
}
unchecked {
_approve(owner, spender, currentAllowance - value, false);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.20;
import {IERC20} from "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)
pragma solidity ^0.8.20;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*
* ==== Security Considerations
*
* There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
* expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
* considered as an intention to spend the allowance in any specific way. The second is that because permits have
* built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
* take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
* generally recommended is:
*
* ```solidity
* function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
* try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
* doThing(..., value);
* }
*
* function doThing(..., uint256 value) public {
* token.safeTransferFrom(msg.sender, address(this), value);
* ...
* }
* ```
*
* Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
* `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
* {SafeERC20-safeTransferFrom}).
*
* Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
* contracts should have entry points that don't rely on permit.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*
* CAUTION: See Security Considerations above.
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.20;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the value of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the value of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves a `value` amount of tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 value) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets a `value` amount of tokens as the allowance of `spender` over the
* caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 value) external returns (bool);
/**
* @dev Moves a `value` amount of tokens from `from` to `to` using the
* allowance mechanism. `value` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 value) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.20;
import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
/**
* @dev An operation with an ERC20 token failed.
*/
error SafeERC20FailedOperation(address token);
/**
* @dev Indicates a failed `decreaseAllowance` request.
*/
error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);
/**
* @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
}
/**
* @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
* calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
*/
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
}
/**
* @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 oldAllowance = token.allowance(address(this), spender);
forceApprove(token, spender, oldAllowance + value);
}
/**
* @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
* value, non-reverting calls are assumed to be successful.
*/
function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
unchecked {
uint256 currentAllowance = token.allowance(address(this), spender);
if (currentAllowance < requestedDecrease) {
revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
}
forceApprove(token, spender, currentAllowance - requestedDecrease);
}
}
/**
* @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
* to be set to zero before setting it to a non-zero value, such as USDT.
*/
function forceApprove(IERC20 token, address spender, uint256 value) internal {
bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));
if (!_callOptionalReturnBool(token, approvalCall)) {
_callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
_callOptionalReturn(token, approvalCall);
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data);
if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
revert SafeERC20FailedOperation(address(token));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*
* This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
*/
function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
// and not revert is the subcall reverts.
(bool success, bytes memory returndata) = address(token).call(data);
return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)
pragma solidity ^0.8.20;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev The ETH balance of the account is not enough to perform the operation.
*/
error AddressInsufficientBalance(address account);
/**
* @dev There's no code at `target` (it is not a contract).
*/
error AddressEmptyCode(address target);
/**
* @dev A call to an address target failed. The target may have reverted.
*/
error FailedInnerCall();
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
if (address(this).balance < amount) {
revert AddressInsufficientBalance(address(this));
}
(bool success, ) = recipient.call{value: amount}("");
if (!success) {
revert FailedInnerCall();
}
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason or custom error, it is bubbled
* up by this function (like regular Solidity function calls). However, if
* the call reverted with no returned reason, this function reverts with a
* {FailedInnerCall} error.
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
if (address(this).balance < value) {
revert AddressInsufficientBalance(address(this));
}
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
* was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
* unsuccessful call.
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata
) internal view returns (bytes memory) {
if (!success) {
_revert(returndata);
} else {
// only check if target is a contract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
if (returndata.length == 0 && target.code.length == 0) {
revert AddressEmptyCode(target);
}
return returndata;
}
}
/**
* @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
* revert reason or with a default {FailedInnerCall} error.
*/
function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
if (!success) {
_revert(returndata);
} else {
return returndata;
}
}
/**
* @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
*/
function _revert(bytes memory returndata) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert FailedInnerCall();
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)
pragma solidity ^0.8.20;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
function _contextSuffixLength() internal view virtual returns (uint256) {
return 0;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)
pragma solidity ^0.8.20;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.
pragma solidity ^0.8.20;
/**
* @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
* checks.
*
* Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
* easily result in undesired exploitation or bugs, since developers usually
* assume that overflows raise errors. `SafeCast` restores this intuition by
* reverting the transaction when such an operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeCast {
/**
* @dev Value doesn't fit in an uint of `bits` size.
*/
error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);
/**
* @dev An int value doesn't fit in an uint of `bits` size.
*/
error SafeCastOverflowedIntToUint(int256 value);
/**
* @dev Value doesn't fit in an int of `bits` size.
*/
error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);
/**
* @dev An uint value doesn't fit in an int of `bits` size.
*/
error SafeCastOverflowedUintToInt(uint256 value);
/**
* @dev Returns the downcasted uint248 from uint256, reverting on
* overflow (when the input is greater than largest uint248).
*
* Counterpart to Solidity's `uint248` operator.
*
* Requirements:
*
* - input must fit into 248 bits
*/
function toUint248(uint256 value) internal pure returns (uint248) {
if (value > type(uint248).max) {
revert SafeCastOverflowedUintDowncast(248, value);
}
return uint248(value);
}
/**
* @dev Returns the downcasted uint240 from uint256, reverting on
* overflow (when the input is greater than largest uint240).
*
* Counterpart to Solidity's `uint240` operator.
*
* Requirements:
*
* - input must fit into 240 bits
*/
function toUint240(uint256 value) internal pure returns (uint240) {
if (value > type(uint240).max) {
revert SafeCastOverflowedUintDowncast(240, value);
}
return uint240(value);
}
/**
* @dev Returns the downcasted uint232 from uint256, reverting on
* overflow (when the input is greater than largest uint232).
*
* Counterpart to Solidity's `uint232` operator.
*
* Requirements:
*
* - input must fit into 232 bits
*/
function toUint232(uint256 value) internal pure returns (uint232) {
if (value > type(uint232).max) {
revert SafeCastOverflowedUintDowncast(232, value);
}
return uint232(value);
}
/**
* @dev Returns the downcasted uint224 from uint256, reverting on
* overflow (when the input is greater than largest uint224).
*
* Counterpart to Solidity's `uint224` operator.
*
* Requirements:
*
* - input must fit into 224 bits
*/
function toUint224(uint256 value) internal pure returns (uint224) {
if (value > type(uint224).max) {
revert SafeCastOverflowedUintDowncast(224, value);
}
return uint224(value);
}
/**
* @dev Returns the downcasted uint216 from uint256, reverting on
* overflow (when the input is greater than largest uint216).
*
* Counterpart to Solidity's `uint216` operator.
*
* Requirements:
*
* - input must fit into 216 bits
*/
function toUint216(uint256 value) internal pure returns (uint216) {
if (value > type(uint216).max) {
revert SafeCastOverflowedUintDowncast(216, value);
}
return uint216(value);
}
/**
* @dev Returns the downcasted uint208 from uint256, reverting on
* overflow (when the input is greater than largest uint208).
*
* Counterpart to Solidity's `uint208` operator.
*
* Requirements:
*
* - input must fit into 208 bits
*/
function toUint208(uint256 value) internal pure returns (uint208) {
if (value > type(uint208).max) {
revert SafeCastOverflowedUintDowncast(208, value);
}
return uint208(value);
}
/**
* @dev Returns the downcasted uint200 from uint256, reverting on
* overflow (when the input is greater than largest uint200).
*
* Counterpart to Solidity's `uint200` operator.
*
* Requirements:
*
* - input must fit into 200 bits
*/
function toUint200(uint256 value) internal pure returns (uint200) {
if (value > type(uint200).max) {
revert SafeCastOverflowedUintDowncast(200, value);
}
return uint200(value);
}
/**
* @dev Returns the downcasted uint192 from uint256, reverting on
* overflow (when the input is greater than largest uint192).
*
* Counterpart to Solidity's `uint192` operator.
*
* Requirements:
*
* - input must fit into 192 bits
*/
function toUint192(uint256 value) internal pure returns (uint192) {
if (value > type(uint192).max) {
revert SafeCastOverflowedUintDowncast(192, value);
}
return uint192(value);
}
/**
* @dev Returns the downcasted uint184 from uint256, reverting on
* overflow (when the input is greater than largest uint184).
*
* Counterpart to Solidity's `uint184` operator.
*
* Requirements:
*
* - input must fit into 184 bits
*/
function toUint184(uint256 value) internal pure returns (uint184) {
if (value > type(uint184).max) {
revert SafeCastOverflowedUintDowncast(184, value);
}
return uint184(value);
}
/**
* @dev Returns the downcasted uint176 from uint256, reverting on
* overflow (when the input is greater than largest uint176).
*
* Counterpart to Solidity's `uint176` operator.
*
* Requirements:
*
* - input must fit into 176 bits
*/
function toUint176(uint256 value) internal pure returns (uint176) {
if (value > type(uint176).max) {
revert SafeCastOverflowedUintDowncast(176, value);
}
return uint176(value);
}
/**
* @dev Returns the downcasted uint168 from uint256, reverting on
* overflow (when the input is greater than largest uint168).
*
* Counterpart to Solidity's `uint168` operator.
*
* Requirements:
*
* - input must fit into 168 bits
*/
function toUint168(uint256 value) internal pure returns (uint168) {
if (value > type(uint168).max) {
revert SafeCastOverflowedUintDowncast(168, value);
}
return uint168(value);
}
/**
* @dev Returns the downcasted uint160 from uint256, reverting on
* overflow (when the input is greater than largest uint160).
*
* Counterpart to Solidity's `uint160` operator.
*
* Requirements:
*
* - input must fit into 160 bits
*/
function toUint160(uint256 value) internal pure returns (uint160) {
if (value > type(uint160).max) {
revert SafeCastOverflowedUintDowncast(160, value);
}
return uint160(value);
}
/**
* @dev Returns the downcasted uint152 from uint256, reverting on
* overflow (when the input is greater than largest uint152).
*
* Counterpart to Solidity's `uint152` operator.
*
* Requirements:
*
* - input must fit into 152 bits
*/
function toUint152(uint256 value) internal pure returns (uint152) {
if (value > type(uint152).max) {
revert SafeCastOverflowedUintDowncast(152, value);
}
return uint152(value);
}
/**
* @dev Returns the downcasted uint144 from uint256, reverting on
* overflow (when the input is greater than largest uint144).
*
* Counterpart to Solidity's `uint144` operator.
*
* Requirements:
*
* - input must fit into 144 bits
*/
function toUint144(uint256 value) internal pure returns (uint144) {
if (value > type(uint144).max) {
revert SafeCastOverflowedUintDowncast(144, value);
}
return uint144(value);
}
/**
* @dev Returns the downcasted uint136 from uint256, reverting on
* overflow (when the input is greater than largest uint136).
*
* Counterpart to Solidity's `uint136` operator.
*
* Requirements:
*
* - input must fit into 136 bits
*/
function toUint136(uint256 value) internal pure returns (uint136) {
if (value > type(uint136).max) {
revert SafeCastOverflowedUintDowncast(136, value);
}
return uint136(value);
}
/**
* @dev Returns the downcasted uint128 from uint256, reverting on
* overflow (when the input is greater than largest uint128).
*
* Counterpart to Solidity's `uint128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*/
function toUint128(uint256 value) internal pure returns (uint128) {
if (value > type(uint128).max) {
revert SafeCastOverflowedUintDowncast(128, value);
}
return uint128(value);
}
/**
* @dev Returns the downcasted uint120 from uint256, reverting on
* overflow (when the input is greater than largest uint120).
*
* Counterpart to Solidity's `uint120` operator.
*
* Requirements:
*
* - input must fit into 120 bits
*/
function toUint120(uint256 value) internal pure returns (uint120) {
if (value > type(uint120).max) {
revert SafeCastOverflowedUintDowncast(120, value);
}
return uint120(value);
}
/**
* @dev Returns the downcasted uint112 from uint256, reverting on
* overflow (when the input is greater than largest uint112).
*
* Counterpart to Solidity's `uint112` operator.
*
* Requirements:
*
* - input must fit into 112 bits
*/
function toUint112(uint256 value) internal pure returns (uint112) {
if (value > type(uint112).max) {
revert SafeCastOverflowedUintDowncast(112, value);
}
return uint112(value);
}
/**
* @dev Returns the downcasted uint104 from uint256, reverting on
* overflow (when the input is greater than largest uint104).
*
* Counterpart to Solidity's `uint104` operator.
*
* Requirements:
*
* - input must fit into 104 bits
*/
function toUint104(uint256 value) internal pure returns (uint104) {
if (value > type(uint104).max) {
revert SafeCastOverflowedUintDowncast(104, value);
}
return uint104(value);
}
/**
* @dev Returns the downcasted uint96 from uint256, reverting on
* overflow (when the input is greater than largest uint96).
*
* Counterpart to Solidity's `uint96` operator.
*
* Requirements:
*
* - input must fit into 96 bits
*/
function toUint96(uint256 value) internal pure returns (uint96) {
if (value > type(uint96).max) {
revert SafeCastOverflowedUintDowncast(96, value);
}
return uint96(value);
}
/**
* @dev Returns the downcasted uint88 from uint256, reverting on
* overflow (when the input is greater than largest uint88).
*
* Counterpart to Solidity's `uint88` operator.
*
* Requirements:
*
* - input must fit into 88 bits
*/
function toUint88(uint256 value) internal pure returns (uint88) {
if (value > type(uint88).max) {
revert SafeCastOverflowedUintDowncast(88, value);
}
return uint88(value);
}
/**
* @dev Returns the downcasted uint80 from uint256, reverting on
* overflow (when the input is greater than largest uint80).
*
* Counterpart to Solidity's `uint80` operator.
*
* Requirements:
*
* - input must fit into 80 bits
*/
function toUint80(uint256 value) internal pure returns (uint80) {
if (value > type(uint80).max) {
revert SafeCastOverflowedUintDowncast(80, value);
}
return uint80(value);
}
/**
* @dev Returns the downcasted uint72 from uint256, reverting on
* overflow (when the input is greater than largest uint72).
*
* Counterpart to Solidity's `uint72` operator.
*
* Requirements:
*
* - input must fit into 72 bits
*/
function toUint72(uint256 value) internal pure returns (uint72) {
if (value > type(uint72).max) {
revert SafeCastOverflowedUintDowncast(72, value);
}
return uint72(value);
}
/**
* @dev Returns the downcasted uint64 from uint256, reverting on
* overflow (when the input is greater than largest uint64).
*
* Counterpart to Solidity's `uint64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*/
function toUint64(uint256 value) internal pure returns (uint64) {
if (value > type(uint64).max) {
revert SafeCastOverflowedUintDowncast(64, value);
}
return uint64(value);
}
/**
* @dev Returns the downcasted uint56 from uint256, reverting on
* overflow (when the input is greater than largest uint56).
*
* Counterpart to Solidity's `uint56` operator.
*
* Requirements:
*
* - input must fit into 56 bits
*/
function toUint56(uint256 value) internal pure returns (uint56) {
if (value > type(uint56).max) {
revert SafeCastOverflowedUintDowncast(56, value);
}
return uint56(value);
}
/**
* @dev Returns the downcasted uint48 from uint256, reverting on
* overflow (when the input is greater than largest uint48).
*
* Counterpart to Solidity's `uint48` operator.
*
* Requirements:
*
* - input must fit into 48 bits
*/
function toUint48(uint256 value) internal pure returns (uint48) {
if (value > type(uint48).max) {
revert SafeCastOverflowedUintDowncast(48, value);
}
return uint48(value);
}
/**
* @dev Returns the downcasted uint40 from uint256, reverting on
* overflow (when the input is greater than largest uint40).
*
* Counterpart to Solidity's `uint40` operator.
*
* Requirements:
*
* - input must fit into 40 bits
*/
function toUint40(uint256 value) internal pure returns (uint40) {
if (value > type(uint40).max) {
revert SafeCastOverflowedUintDowncast(40, value);
}
return uint40(value);
}
/**
* @dev Returns the downcasted uint32 from uint256, reverting on
* overflow (when the input is greater than largest uint32).
*
* Counterpart to Solidity's `uint32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*/
function toUint32(uint256 value) internal pure returns (uint32) {
if (value > type(uint32).max) {
revert SafeCastOverflowedUintDowncast(32, value);
}
return uint32(value);
}
/**
* @dev Returns the downcasted uint24 from uint256, reverting on
* overflow (when the input is greater than largest uint24).
*
* Counterpart to Solidity's `uint24` operator.
*
* Requirements:
*
* - input must fit into 24 bits
*/
function toUint24(uint256 value) internal pure returns (uint24) {
if (value > type(uint24).max) {
revert SafeCastOverflowedUintDowncast(24, value);
}
return uint24(value);
}
/**
* @dev Returns the downcasted uint16 from uint256, reverting on
* overflow (when the input is greater than largest uint16).
*
* Counterpart to Solidity's `uint16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*/
function toUint16(uint256 value) internal pure returns (uint16) {
if (value > type(uint16).max) {
revert SafeCastOverflowedUintDowncast(16, value);
}
return uint16(value);
}
/**
* @dev Returns the downcasted uint8 from uint256, reverting on
* overflow (when the input is greater than largest uint8).
*
* Counterpart to Solidity's `uint8` operator.
*
* Requirements:
*
* - input must fit into 8 bits
*/
function toUint8(uint256 value) internal pure returns (uint8) {
if (value > type(uint8).max) {
revert SafeCastOverflowedUintDowncast(8, value);
}
return uint8(value);
}
/**
* @dev Converts a signed int256 into an unsigned uint256.
*
* Requirements:
*
* - input must be greater than or equal to 0.
*/
function toUint256(int256 value) internal pure returns (uint256) {
if (value < 0) {
revert SafeCastOverflowedIntToUint(value);
}
return uint256(value);
}
/**
* @dev Returns the downcasted int248 from int256, reverting on
* overflow (when the input is less than smallest int248 or
* greater than largest int248).
*
* Counterpart to Solidity's `int248` operator.
*
* Requirements:
*
* - input must fit into 248 bits
*/
function toInt248(int256 value) internal pure returns (int248 downcasted) {
downcasted = int248(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(248, value);
}
}
/**
* @dev Returns the downcasted int240 from int256, reverting on
* overflow (when the input is less than smallest int240 or
* greater than largest int240).
*
* Counterpart to Solidity's `int240` operator.
*
* Requirements:
*
* - input must fit into 240 bits
*/
function toInt240(int256 value) internal pure returns (int240 downcasted) {
downcasted = int240(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(240, value);
}
}
/**
* @dev Returns the downcasted int232 from int256, reverting on
* overflow (when the input is less than smallest int232 or
* greater than largest int232).
*
* Counterpart to Solidity's `int232` operator.
*
* Requirements:
*
* - input must fit into 232 bits
*/
function toInt232(int256 value) internal pure returns (int232 downcasted) {
downcasted = int232(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(232, value);
}
}
/**
* @dev Returns the downcasted int224 from int256, reverting on
* overflow (when the input is less than smallest int224 or
* greater than largest int224).
*
* Counterpart to Solidity's `int224` operator.
*
* Requirements:
*
* - input must fit into 224 bits
*/
function toInt224(int256 value) internal pure returns (int224 downcasted) {
downcasted = int224(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(224, value);
}
}
/**
* @dev Returns the downcasted int216 from int256, reverting on
* overflow (when the input is less than smallest int216 or
* greater than largest int216).
*
* Counterpart to Solidity's `int216` operator.
*
* Requirements:
*
* - input must fit into 216 bits
*/
function toInt216(int256 value) internal pure returns (int216 downcasted) {
downcasted = int216(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(216, value);
}
}
/**
* @dev Returns the downcasted int208 from int256, reverting on
* overflow (when the input is less than smallest int208 or
* greater than largest int208).
*
* Counterpart to Solidity's `int208` operator.
*
* Requirements:
*
* - input must fit into 208 bits
*/
function toInt208(int256 value) internal pure returns (int208 downcasted) {
downcasted = int208(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(208, value);
}
}
/**
* @dev Returns the downcasted int200 from int256, reverting on
* overflow (when the input is less than smallest int200 or
* greater than largest int200).
*
* Counterpart to Solidity's `int200` operator.
*
* Requirements:
*
* - input must fit into 200 bits
*/
function toInt200(int256 value) internal pure returns (int200 downcasted) {
downcasted = int200(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(200, value);
}
}
/**
* @dev Returns the downcasted int192 from int256, reverting on
* overflow (when the input is less than smallest int192 or
* greater than largest int192).
*
* Counterpart to Solidity's `int192` operator.
*
* Requirements:
*
* - input must fit into 192 bits
*/
function toInt192(int256 value) internal pure returns (int192 downcasted) {
downcasted = int192(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(192, value);
}
}
/**
* @dev Returns the downcasted int184 from int256, reverting on
* overflow (when the input is less than smallest int184 or
* greater than largest int184).
*
* Counterpart to Solidity's `int184` operator.
*
* Requirements:
*
* - input must fit into 184 bits
*/
function toInt184(int256 value) internal pure returns (int184 downcasted) {
downcasted = int184(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(184, value);
}
}
/**
* @dev Returns the downcasted int176 from int256, reverting on
* overflow (when the input is less than smallest int176 or
* greater than largest int176).
*
* Counterpart to Solidity's `int176` operator.
*
* Requirements:
*
* - input must fit into 176 bits
*/
function toInt176(int256 value) internal pure returns (int176 downcasted) {
downcasted = int176(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(176, value);
}
}
/**
* @dev Returns the downcasted int168 from int256, reverting on
* overflow (when the input is less than smallest int168 or
* greater than largest int168).
*
* Counterpart to Solidity's `int168` operator.
*
* Requirements:
*
* - input must fit into 168 bits
*/
function toInt168(int256 value) internal pure returns (int168 downcasted) {
downcasted = int168(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(168, value);
}
}
/**
* @dev Returns the downcasted int160 from int256, reverting on
* overflow (when the input is less than smallest int160 or
* greater than largest int160).
*
* Counterpart to Solidity's `int160` operator.
*
* Requirements:
*
* - input must fit into 160 bits
*/
function toInt160(int256 value) internal pure returns (int160 downcasted) {
downcasted = int160(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(160, value);
}
}
/**
* @dev Returns the downcasted int152 from int256, reverting on
* overflow (when the input is less than smallest int152 or
* greater than largest int152).
*
* Counterpart to Solidity's `int152` operator.
*
* Requirements:
*
* - input must fit into 152 bits
*/
function toInt152(int256 value) internal pure returns (int152 downcasted) {
downcasted = int152(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(152, value);
}
}
/**
* @dev Returns the downcasted int144 from int256, reverting on
* overflow (when the input is less than smallest int144 or
* greater than largest int144).
*
* Counterpart to Solidity's `int144` operator.
*
* Requirements:
*
* - input must fit into 144 bits
*/
function toInt144(int256 value) internal pure returns (int144 downcasted) {
downcasted = int144(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(144, value);
}
}
/**
* @dev Returns the downcasted int136 from int256, reverting on
* overflow (when the input is less than smallest int136 or
* greater than largest int136).
*
* Counterpart to Solidity's `int136` operator.
*
* Requirements:
*
* - input must fit into 136 bits
*/
function toInt136(int256 value) internal pure returns (int136 downcasted) {
downcasted = int136(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(136, value);
}
}
/**
* @dev Returns the downcasted int128 from int256, reverting on
* overflow (when the input is less than smallest int128 or
* greater than largest int128).
*
* Counterpart to Solidity's `int128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*/
function toInt128(int256 value) internal pure returns (int128 downcasted) {
downcasted = int128(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(128, value);
}
}
/**
* @dev Returns the downcasted int120 from int256, reverting on
* overflow (when the input is less than smallest int120 or
* greater than largest int120).
*
* Counterpart to Solidity's `int120` operator.
*
* Requirements:
*
* - input must fit into 120 bits
*/
function toInt120(int256 value) internal pure returns (int120 downcasted) {
downcasted = int120(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(120, value);
}
}
/**
* @dev Returns the downcasted int112 from int256, reverting on
* overflow (when the input is less than smallest int112 or
* greater than largest int112).
*
* Counterpart to Solidity's `int112` operator.
*
* Requirements:
*
* - input must fit into 112 bits
*/
function toInt112(int256 value) internal pure returns (int112 downcasted) {
downcasted = int112(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(112, value);
}
}
/**
* @dev Returns the downcasted int104 from int256, reverting on
* overflow (when the input is less than smallest int104 or
* greater than largest int104).
*
* Counterpart to Solidity's `int104` operator.
*
* Requirements:
*
* - input must fit into 104 bits
*/
function toInt104(int256 value) internal pure returns (int104 downcasted) {
downcasted = int104(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(104, value);
}
}
/**
* @dev Returns the downcasted int96 from int256, reverting on
* overflow (when the input is less than smallest int96 or
* greater than largest int96).
*
* Counterpart to Solidity's `int96` operator.
*
* Requirements:
*
* - input must fit into 96 bits
*/
function toInt96(int256 value) internal pure returns (int96 downcasted) {
downcasted = int96(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(96, value);
}
}
/**
* @dev Returns the downcasted int88 from int256, reverting on
* overflow (when the input is less than smallest int88 or
* greater than largest int88).
*
* Counterpart to Solidity's `int88` operator.
*
* Requirements:
*
* - input must fit into 88 bits
*/
function toInt88(int256 value) internal pure returns (int88 downcasted) {
downcasted = int88(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(88, value);
}
}
/**
* @dev Returns the downcasted int80 from int256, reverting on
* overflow (when the input is less than smallest int80 or
* greater than largest int80).
*
* Counterpart to Solidity's `int80` operator.
*
* Requirements:
*
* - input must fit into 80 bits
*/
function toInt80(int256 value) internal pure returns (int80 downcasted) {
downcasted = int80(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(80, value);
}
}
/**
* @dev Returns the downcasted int72 from int256, reverting on
* overflow (when the input is less than smallest int72 or
* greater than largest int72).
*
* Counterpart to Solidity's `int72` operator.
*
* Requirements:
*
* - input must fit into 72 bits
*/
function toInt72(int256 value) internal pure returns (int72 downcasted) {
downcasted = int72(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(72, value);
}
}
/**
* @dev Returns the downcasted int64 from int256, reverting on
* overflow (when the input is less than smallest int64 or
* greater than largest int64).
*
* Counterpart to Solidity's `int64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*/
function toInt64(int256 value) internal pure returns (int64 downcasted) {
downcasted = int64(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(64, value);
}
}
/**
* @dev Returns the downcasted int56 from int256, reverting on
* overflow (when the input is less than smallest int56 or
* greater than largest int56).
*
* Counterpart to Solidity's `int56` operator.
*
* Requirements:
*
* - input must fit into 56 bits
*/
function toInt56(int256 value) internal pure returns (int56 downcasted) {
downcasted = int56(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(56, value);
}
}
/**
* @dev Returns the downcasted int48 from int256, reverting on
* overflow (when the input is less than smallest int48 or
* greater than largest int48).
*
* Counterpart to Solidity's `int48` operator.
*
* Requirements:
*
* - input must fit into 48 bits
*/
function toInt48(int256 value) internal pure returns (int48 downcasted) {
downcasted = int48(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(48, value);
}
}
/**
* @dev Returns the downcasted int40 from int256, reverting on
* overflow (when the input is less than smallest int40 or
* greater than largest int40).
*
* Counterpart to Solidity's `int40` operator.
*
* Requirements:
*
* - input must fit into 40 bits
*/
function toInt40(int256 value) internal pure returns (int40 downcasted) {
downcasted = int40(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(40, value);
}
}
/**
* @dev Returns the downcasted int32 from int256, reverting on
* overflow (when the input is less than smallest int32 or
* greater than largest int32).
*
* Counterpart to Solidity's `int32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*/
function toInt32(int256 value) internal pure returns (int32 downcasted) {
downcasted = int32(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(32, value);
}
}
/**
* @dev Returns the downcasted int24 from int256, reverting on
* overflow (when the input is less than smallest int24 or
* greater than largest int24).
*
* Counterpart to Solidity's `int24` operator.
*
* Requirements:
*
* - input must fit into 24 bits
*/
function toInt24(int256 value) internal pure returns (int24 downcasted) {
downcasted = int24(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(24, value);
}
}
/**
* @dev Returns the downcasted int16 from int256, reverting on
* overflow (when the input is less than smallest int16 or
* greater than largest int16).
*
* Counterpart to Solidity's `int16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*/
function toInt16(int256 value) internal pure returns (int16 downcasted) {
downcasted = int16(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(16, value);
}
}
/**
* @dev Returns the downcasted int8 from int256, reverting on
* overflow (when the input is less than smallest int8 or
* greater than largest int8).
*
* Counterpart to Solidity's `int8` operator.
*
* Requirements:
*
* - input must fit into 8 bits
*/
function toInt8(int256 value) internal pure returns (int8 downcasted) {
downcasted = int8(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(8, value);
}
}
/**
* @dev Converts an unsigned uint256 into a signed int256.
*
* Requirements:
*
* - input must be less than or equal to maxInt256.
*/
function toInt256(uint256 value) internal pure returns (int256) {
// Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
if (value > uint256(type(int256).max)) {
revert SafeCastOverflowedUintToInt(value);
}
return int256(value);
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.24;
contract ClaimableAdminStorage {
/**
* @notice Administrator for this contract
*/
address public admin;
/**
* @notice Pending administrator for this contract
*/
address public pendingAdmin;
/*** Modifiers ***/
modifier onlyAdmin() {
require(msg.sender == admin, "ONLY_ADMIN");
_;
}
/*** Constructor ***/
constructor() {
// Set admin to caller
admin = msg.sender;
}
}
contract AcceptableImplementationClaimableAdminStorage is
ClaimableAdminStorage
{
/**
* @notice Active logic
*/
address public implementation;
/**
* @notice Pending logic
*/
address public pendingImplementation;
}
contract AcceptableRegistryImplementationClaimableAdminStorage is
AcceptableImplementationClaimableAdminStorage
{
/**
* @notice System Registry
*/
address public registry;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.24;
import "./AcceptableImplementationClaimableAdminStorage.sol";
/**
* @title Claimable Admin
*/
contract ClaimableAdmin is ClaimableAdminStorage {
/**
* @notice Emitted when pendingAdmin is changed
*/
event NewPendingAdmin(address oldPendingAdmin, address newPendingAdmin);
/**
* @notice Emitted when pendingAdmin is accepted, which means admin is updated
*/
event NewAdmin(address oldAdmin, address newAdmin);
/*** Admin Functions ***/
/**
* @notice Begins transfer of admin rights. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
* @dev Admin function to begin change of admin. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
* @param newPendingAdmin New pending admin.
*/
function _setPendingAdmin(address newPendingAdmin) public {
// Check caller = admin
require(msg.sender == admin, "Not Admin");
// Save current value, if any, for inclusion in log
address oldPendingAdmin = pendingAdmin;
// Store pendingAdmin with value newPendingAdmin
pendingAdmin = newPendingAdmin;
// Emit NewPendingAdmin(oldPendingAdmin, newPendingAdmin)
emit NewPendingAdmin(oldPendingAdmin, newPendingAdmin);
}
/**
* @notice Accepts transfer of admin rights. msg.sender must be pendingAdmin
* @dev Admin function for pending admin to accept role and update admin
*/
function _acceptAdmin() public {
// Check caller is pendingAdmin and pendingAdmin ≠ address(0)
require(
msg.sender == pendingAdmin && pendingAdmin != address(0),
"Not the EXISTING pending admin"
);
// Save current values for inclusion in log
address oldAdmin = admin;
address oldPendingAdmin = pendingAdmin;
// Store admin with value pendingAdmin
admin = pendingAdmin;
// Clear the pending value
pendingAdmin = address(0);
emit NewAdmin(oldAdmin, admin);
emit NewPendingAdmin(oldPendingAdmin, pendingAdmin);
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.24;
interface IContractRegistryBase {
function isImplementationValidForProxy(
bytes32 proxyNameHash,
address _implementation
) external view returns (bool);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.24;
/**
* @title EIP712Utils
* @notice Utility functions for EIP-712 logic.
* @dev Based on https://github.com/ethereum/EIPs/blob/master/assets/eip-712/Example.sol
*/
contract EIP712Utils {
struct EIP712Domain {
string name;
string version;
uint256 chainId;
address verifyingContract;
}
bytes32 public constant EIP712DOMAIN_TYPEHASH =
keccak256(
"EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
);
function hashDomain(
EIP712Domain memory eip712Domain
) internal pure returns (bytes32) {
return
keccak256(
abi.encode(
EIP712DOMAIN_TYPEHASH,
keccak256(bytes(eip712Domain.name)),
keccak256(bytes(eip712Domain.version)),
eip712Domain.chainId,
eip712Domain.verifyingContract
)
);
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.24;
import "./EIP712Utils.sol";
/**
* @title MultiChainEIP712Base
* @notice Base contract for EIP712 signature verification using multiple chain ids
*/
contract MultiChainEIP712Base is EIP712Utils {
// ***** Events *****
event DomainSeparatorForChainStored(
uint256 indexed chainId,
bytes32 domainSeparator
);
// ***** Storage *****
string public CONTRACT_DOMAIN_NAME;
string public CONTRACT_DOMAIN_VERSION;
// asset => domain separator for intents
mapping(uint256 => bytes32) public domainSeparatorForChain;
// ***** Constructor *****
constructor(
string memory _contractDomainName,
string memory _contractDomainVersion
) {
CONTRACT_DOMAIN_NAME = _contractDomainName;
CONTRACT_DOMAIN_VERSION = _contractDomainVersion;
}
// ***** Domain Generation *****
function generateAndStoreDomainSeparatorIfMissingInternal(
uint256 chainId
) internal returns (bytes32) {
bytes32 storedDomainSeparator = domainSeparatorForChain[chainId];
if (storedDomainSeparator == bytes32(0)) {
bytes32 domainSeparator = hashDomain(
EIP712Domain({
name: CONTRACT_DOMAIN_NAME,
version: CONTRACT_DOMAIN_VERSION,
chainId: chainId,
verifyingContract: address(this)
})
);
domainSeparatorForChain[chainId] = domainSeparator;
emit DomainSeparatorForChainStored(chainId, domainSeparator);
return domainSeparator;
} else {
return storedDomainSeparator;
}
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.24;
import {ChipEnumsV1} from "../interfaces/ChipEnumsV1.sol";
import "../interfaces/IRegistryV1.sol";
/**
* @title BaseChip
* @notice Base for Chip contracts to inherit from, handles the auto approval mechanism.
*/
contract BaseChip is ChipEnumsV1 {
// ***** Events *****
event AutoApprovedSpenderSet(
string indexed role,
address indexed oldSpender,
address indexed newSpender
);
// ***** Immutable Storage *****
IRegistryV1 public immutable registry;
ChipMode public immutable chipMode;
// ***** Storage *****
// address => is auto approved
mapping(address => bool) public autoApproved;
// role hash => role address
mapping(bytes32 => address) public autoApprovedSpendersByRoles;
// ***** Views *****
function getAutoApprovedSpenderAddressByRole(
string calldata role
) public view returns (address) {
bytes32 roleHash = keccak256(abi.encodePacked(role));
return autoApprovedSpendersByRoles[roleHash];
}
// ***** Constructor *****
constructor(IRegistryV1 _registry, ChipMode _chipMode) {
require(address(_registry) != address(0), "!_registry");
registry = _registry;
chipMode = _chipMode;
}
// ***** Admin Functions *****
function setAutoApprovedSpenderForRoleInternal(
string calldata role,
address spender
) internal {
require(
spender == address(0) ||
registry.getValidSpenderTargetForChipByRole(address(this), role) ==
spender,
"NOT_REGISTRY_APPROVED"
);
address oldSpender = getAutoApprovedSpenderAddressByRole(role);
autoApproved[oldSpender] = false;
autoApproved[spender] = true;
bytes32 roleHash = keccak256(abi.encodePacked(role));
autoApprovedSpendersByRoles[roleHash] = spender;
emit AutoApprovedSpenderSet(role, oldSpender, spender);
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.24;
import "@layerzerolabs/lz-evm-oapp-v2/contracts/oft/OFT.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import "../../interfaces/IRegistryV1.sol";
import "../../interfaces/ILzCreditControllerV1.sol";
import "../../interfaces/ILzDebitControllerV1.sol";
import "../BaseChip.sol";
/**
* @title OFTChip
* @notice The OFTChip is a remote chip that extends the LayerZero OFT token.
*/
contract OFTChip is OFT, BaseChip {
// ***** Events *****
event IsSendPausedSet(bool isPaused);
event CreditControllerSet(
address indexed previousController,
address indexed newController
);
event DebitControllerSet(
address indexed previousController,
address indexed newController
);
event TokensSwept(
address indexed token,
address indexed receiver,
uint256 amount
);
// ***** Storage *****
bool public isSendPaused;
ILzCreditControllerV1 public creditController;
ILzDebitControllerV1 public debitController;
// ***** Constructor *****
constructor(
IRegistryV1 _registry,
string memory _name,
string memory _symbol,
address _lzEndpoint,
address _delegate,
address _initialOwner
)
OFT(_name, _symbol, _lzEndpoint, _delegate)
BaseChip(_registry, ChipMode.REMOTE)
Ownable(_initialOwner)
{
require(address(_lzEndpoint) != address(0), "!_lzEndpoint");
}
// ***** Admin Functions *****
/**
* @notice Set the auto approved spender for a role
* @param role The role to set the spender for
* @param spender The spender to set
*/
function setAutoApprovedSpenderForRole(
string calldata role,
address spender
) external onlyOwner {
setAutoApprovedSpenderForRoleInternal(role, spender);
}
/**
* @notice Set the send pause state
* @param _isPaused The new send pause state
*/
function setIsSendPaused(bool _isPaused) external onlyOwner {
bool currentState = isSendPaused;
require(_isPaused != currentState, "ALREADY_SET");
isSendPaused = _isPaused;
emit IsSendPausedSet(_isPaused);
}
/**
* @notice Set the credit controller
* @param _creditController The new credit controller
*/
function setCreditController(
ILzCreditControllerV1 _creditController
) external onlyOwner {
// Sanity
require(
address(_creditController) == address(0) ||
_creditController.isCreditController(),
"NOT_CREDIT_CONTROLLER"
);
address previousController = address(creditController);
require(previousController != address(_creditController), "ALREADY_SET");
creditController = _creditController;
emit CreditControllerSet(previousController, address(_creditController));
}
/**
* @notice Set the debit controller
* @param _debitController The new debit controller
*/
function setDebitController(
ILzDebitControllerV1 _debitController
) external onlyOwner {
// Sanity
require(
address(_debitController) == address(0) ||
_debitController.isDebitController(),
"NOT_DEBIT_CONTROLLER"
);
address previousController = address(debitController);
require(previousController != address(_debitController), "ALREADY_SET");
debitController = _debitController;
emit DebitControllerSet(previousController, address(_debitController));
}
/**
* @notice Sweep any non-underlying tokens from the contract
* @dev Owner can sweep any tokens other than the underlying token
* @param _token The token to sweep
* @param _amount The amount to sweep
*/
function sweepTokens(ERC20 _token, uint256 _amount) external onlyOwner {
require(address(_token) != address(this), "CANNOT_SWEEP_SELF");
_token.transfer(owner(), _amount);
emit TokensSwept(address(_token), owner(), _amount);
}
// ***** Lz Functions *****
/**
* @dev Credits tokens to the specified address.
* @param _to The address to credit the tokens to.
* @param _amountLD The amount of tokens to credit in local decimals.
* @dev _srcEid The source chain ID.
* @return amountReceivedLD The amount of tokens ACTUALLY received in local decimals.
*/
function _credit(
address _to,
uint256 _amountLD,
uint32 _srcEid
) internal virtual override returns (uint256 amountReceivedLD) {
ILzCreditControllerV1 creditController_ = creditController;
if (address(creditController_) != address(0)) {
try
creditController_.informLzCreditRequest(_to, _amountLD, _srcEid)
{} catch {}
}
return super._credit(_to, _amountLD, _srcEid);
}
/**
* @dev Burns tokens from the sender's specified balance.
* @param _from The address to debit the tokens from.
* @param _amountLD The amount of tokens to send in local decimals.
* @param _minAmountLD The minimum amount to send in local decimals.
* @param _dstEid The destination chain ID.
* @return amountSentLD The amount sent in local decimals.
* @return amountReceivedLD The amount received in local decimals on the remote.
*/
function _debit(
address _from,
uint256 _amountLD,
uint256 _minAmountLD,
uint32 _dstEid
)
internal
virtual
override
returns (uint256 amountSentLD, uint256 amountReceivedLD)
{
require(!isSendPaused, "SEND_PAUSED");
ILzDebitControllerV1 debitController_ = debitController;
if (address(debitController_) != address(0)) {
require(
debitController_.informLzDebitRequestWithSource(
_from,
_amountLD,
_minAmountLD,
_dstEid
),
"DEBIT_NOT_APPROVED"
);
}
return super._debit(_from, _amountLD, _minAmountLD, _dstEid);
}
// ***** ERC20 internal override Functions *****
/**
* @notice Uses the base ERC20 logic unless 'spender' is marked as 'autoApproved'
*/
function allowance(
address owner,
address spender
) public view virtual override returns (uint256) {
if (autoApproved[spender]) {
return type(uint).max;
} else {
return ERC20.allowance(owner, spender);
}
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.24;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import "@layerzerolabs/lz-evm-oapp-v2/contracts/oft/OFTAdapter.sol";
import "../../interfaces/ILzCreditControllerV1.sol";
import "../../interfaces/ILzDebitControllerV1.sol";
/**
* @title OFTChipAdapter
* @notice The OFTChipAdapter is a the source chain counterpart of the OFTChip that extends the LayerZero OFT token adapter.
*/
contract OFTChipAdapter is OFTAdapter {
// ***** Events *****
event IsSendPausedSet(bool isPaused);
event CreditControllerSet(
address indexed previousController,
address indexed newController
);
event DebitControllerSet(
address indexed previousController,
address indexed newController
);
event UnderlyingRecoveryRenounced();
event UnderlyingRecovered(address indexed receiver, uint256 amount);
event TokensSwept(
address indexed token,
address indexed receiver,
uint256 amount
);
// ***** Storage *****
bool public isSendPaused;
bool public isUnderlyingRecoveryRenounced;
ILzCreditControllerV1 public creditController;
ILzDebitControllerV1 public debitController;
// ***** Constructor *****
constructor(
address _token, // a deployed, already existing ERC20 token address
address _layerZeroEndpoint, // local endpoint address
address _delegate, // delegate address
address _initialOwner // token owner
) OFTAdapter(_token, _layerZeroEndpoint, _delegate) Ownable(_initialOwner) {}
// ***** Admin Functions *****
/**
* @notice Set the send pause state
* @param _isPaused The new send pause state
*/
function setIsSendPaused(bool _isPaused) external onlyOwner {
bool currentState = isSendPaused;
require(_isPaused != currentState, "ALREADY_SET");
isSendPaused = _isPaused;
emit IsSendPausedSet(_isPaused);
}
/**
* @notice Set the credit controller
* @param _creditController The new credit controller
*/
function setCreditController(
ILzCreditControllerV1 _creditController
) external onlyOwner {
// Sanity
require(
address(_creditController) == address(0) ||
_creditController.isCreditController(),
"NOT_CREDIT_CONTROLLER"
);
address previousController = address(creditController);
require(previousController != address(_creditController), "ALREADY_SET");
creditController = _creditController;
emit CreditControllerSet(previousController, address(_creditController));
}
/**
* @notice Set the debit controller
* @param _debitController The new debit controller
*/
function setDebitController(
ILzDebitControllerV1 _debitController
) external onlyOwner {
// Sanity
require(
address(_debitController) == address(0) ||
_debitController.isDebitController(),
"NOT_DEBIT_CONTROLLER"
);
address previousController = address(debitController);
require(previousController != address(_debitController), "ALREADY_SET");
debitController = _debitController;
emit DebitControllerSet(previousController, address(_debitController));
}
/**
* @notice Renounce the ability to recover the underlying token
* @dev Once renounced, it cannot be undone
*/
function renounceUnderlyingRecovery() external onlyOwner {
require(!isUnderlyingRecoveryRenounced, "ALREADY_RENOUNCED");
isUnderlyingRecoveryRenounced = true;
emit UnderlyingRecoveryRenounced();
}
/**
* @notice Recover the underlying token
* @dev Owner can recover the underlying token in emergency situations
* @param _amount The amount to recover
*/
function recoverUnderlying(uint256 _amount) external onlyOwner {
require(!isUnderlyingRecoveryRenounced, "UNDERLYING_RECOVERY_RENOUNCED");
innerToken.transfer(owner(), _amount);
emit UnderlyingRecovered(owner(), _amount);
}
/**
* @notice Sweep any non-underlying tokens from the contract
* @dev Owner can sweep any tokens other than the underlying token
* @param _token The token to sweep
* @param _amount The amount to sweep
*/
function sweepTokens(IERC20 _token, uint256 _amount) external onlyOwner {
require(
address(_token) != address(innerToken),
"CANNOT_SWEEP_ADAPTER_TOKEN"
);
_token.transfer(owner(), _amount);
emit TokensSwept(address(_token), owner(), _amount);
}
// ***** Lz Functions *****
/**
* @dev Credits tokens to the specified address.
* @param _to The address to credit the tokens to.
* @param _amountLD The amount of tokens to credit in local decimals.
* @dev _srcEid The source chain ID.
* @return amountReceivedLD The amount of tokens ACTUALLY received in local decimals.
*
* @dev WARNING: The default OFTAdapter implementation assumes LOSSLESS transfers, ie. 1 token in, 1 token out.
* IF the 'innerToken' applies something like a transfer fee, the default will NOT work...
* a pre/post balance check will need to be done to calculate the amountReceivedLD.
*/
function _credit(
address _to,
uint256 _amountLD,
uint32 _srcEid
) internal virtual override returns (uint256 amountReceivedLD) {
// Informs the credit controller if exists
// If it fails, it will not affect the main flow
ILzCreditControllerV1 creditController_ = creditController;
if (address(creditController_) != address(0)) {
try
creditController_.informLzCreditRequest(_to, _amountLD, _srcEid)
{} catch {}
}
// Continue withe the regular flow
return super._credit(_to, _amountLD, _srcEid);
}
/**
* @dev Burns tokens from the sender's specified balance, ie. pull method.
* @param _from The address to debit from.
* @param _amountLD The amount of tokens to send in local decimals.
* @param _minAmountLD The minimum amount to send in local decimals.
* @param _dstEid The destination chain ID.
* @return amountSentLD The amount sent in local decimals.
* @return amountReceivedLD The amount received in local decimals on the remote.
*
* @dev msg.sender will need to approve this _amountLD of tokens to be locked inside of the contract.
* @dev WARNING: The default OFTAdapter implementation assumes LOSSLESS transfers, ie. 1 token in, 1 token out.
* IF the 'innerToken' applies something like a transfer fee, the default will NOT work...
* a pre/post balance check will need to be done to calculate the amountReceivedLD.
*/
function _debit(
address _from,
uint256 _amountLD,
uint256 _minAmountLD,
uint32 _dstEid
)
internal
virtual
override
returns (uint256 amountSentLD, uint256 amountReceivedLD)
{
// Check if sending is paused
require(!isSendPaused, "SEND_PAUSED");
// Request approval from the debit controller if exists
ILzDebitControllerV1 debitController_ = debitController;
if (address(debitController_) != address(0)) {
require(
debitController_.informLzDebitRequestWithSource(
_from,
_amountLD,
_minAmountLD,
_dstEid
),
"DEBIT_NOT_APPROVED"
);
}
// Continue withe the regular flow
return super._debit(_from, _amountLD, _minAmountLD, _dstEid);
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.24;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@layerzerolabs/lz-evm-oapp-v2/contracts/oft/OFT.sol";
import "@layerzerolabs/lz-evm-oapp-v2/contracts/oft/OFTCore.sol";
import "@layerzerolabs/lz-evm-oapp-v2/contracts/oapp/libs/OptionsBuilder.sol";
import "../interfaces/IRegistryV1.sol";
import "./NonceMechanisms/AccountAndActionSerialNonceBase.sol";
import "./MultiSourceChainIntentsVerifierBase.sol";
import "../../Peripheral/Chips/WrapNativeChipInOutHelper.sol";
/**
* @title ChipsIntentsVerifierV1
* @notice This contract is responsible for verifying Chips elated intents (Currently only CHIP_OUT_LZ)
* @dev All verification functions in this contract work in the same manner
* - Verify that the payload was signed by the trader
* - Verify that the nonce is valid (and mark it as used)
* - Perform the action
* - Emit an event
*
* This contract takes a fee from the holder and sends it to the feesReceiver upon each verification
*/
contract ChipsIntentsVerifierV1 is
MultiSourceChainIntentsVerifierBase,
AccountAndActionSerialNonceBase
{
using OptionsBuilder for bytes;
// ***** Enums *****
enum ChipsIntentsVerifierActions {
NONE,
CHIP_OUT_LZ,
CHIP_OUT_LZ_UNWRAP
}
// ***** Action Verifications (Immutable) *****
string public constant REQUEST_PAYLOAD_CHIP_OUT_LZ_TYPE_DESCRIPTOR =
"HolderRequestPayload_ChipOutLZ(uint256 nonce,address chip,address holder,address receiver,uint256 amount)";
struct HolderRequestPayload_ChipOutLZ {
uint256 nonce;
address chip;
address holder;
address receiver;
uint256 amount;
}
string public constant REQUEST_PAYLOAD_CHIP_OUT_LZ_UNWRAP_TYPE_DESCRIPTOR =
"HolderRequestPayload_ChipOutLZ_Unwrap(uint256 nonce,address chip,address holder,address receiver,uint256 amount)";
struct HolderRequestPayload_ChipOutLZ_Unwrap {
uint256 nonce;
address chip;
address holder;
address receiver;
uint256 amount;
}
// ***** Contracts (Immutable) *****
IRegistryV1 public immutable registry;
// ***** Storage *****
address public feesReceiver;
// chip => fee
mapping(address => uint256) public chipOutFeeForChip;
// evm id => lz eid
mapping(uint16 => uint16) public evmIdToLzEid;
// oft-chip (engine-chain) => wrapNativeChipInOutHelper (dst-chain)
mapping(OFT => WrapNativeChipInOutHelper) public wrapNativeChipInOutHelpers;
// ***** Events *****
event ChipOutFeeSet(address indexed chip, uint256 fee);
event LzEidSet(uint16 indexed evmId, uint16 indexed lzEid);
event FeesReceiverSet(address indexed receiver);
event NativeChipInOutHelperSet(
OFT indexed oftChip,
WrapNativeChipInOutHelper indexed helper
);
event ForceChipOut(
address indexed chip,
address indexed holder,
ChipsIntentsVerifierActions action,
uint256 amount,
uint256 fee
);
event ChipsIntentVerified(
address indexed sender,
address indexed chip,
address indexed holder,
ChipsIntentsVerifierActions action,
uint256 amount,
uint256 fee
);
event InteractedOnBehalf(
address indexed chip,
address indexed holder,
address indexed permissionedAccount,
ChipsIntentsVerifierActions action,
uint256 amount,
uint256 fee
);
// ***** Modifiers *****
// ***** Views *****
function getLZDstChainIdFromChip(
address chip
) external view returns (uint16) {
uint256 chipSourceChain = sourceChainIdForAsset[chip];
require(chipSourceChain != 0, "NO_SOURCE_CHAIN_FOR_CHIP");
return getLZDstChainIdFromEvmChainIdInternal(uint16(chipSourceChain));
}
function getLZDstChainIdFromEvmChainId(
uint16 evmChainId
) external view returns (uint16) {
return getLZDstChainIdFromEvmChainIdInternal(evmChainId);
}
function recoverChipOutLZPayloadSigner(
HolderRequestPayload_ChipOutLZ calldata payload,
uint8 v,
bytes32 r,
bytes32 s,
bytes32 domainSeparator
) public pure returns (address) {
bytes32 digest = keccak256(
abi.encodePacked("\x19\x01", domainSeparator, hashChipOutPayload(payload))
);
return ecrecover(digest, v, r, s);
}
function recoverChipOutLZUnwrapPayloadSigner(
HolderRequestPayload_ChipOutLZ_Unwrap calldata payload,
uint8 v,
bytes32 r,
bytes32 s,
bytes32 domainSeparator
) public pure returns (address) {
bytes32 digest = keccak256(
abi.encodePacked(
"\x19\x01",
domainSeparator,
hashChipOutUnwrapPayload(payload)
)
);
return ecrecover(digest, v, r, s);
}
function getWrapNativeChipInOutHelper(
OFT oftChip
) external view returns (WrapNativeChipInOutHelper) {
return wrapNativeChipInOutHelpers[oftChip];
}
// ***** Constructor *****
constructor(
IRegistryV1 _registry
) MultiSourceChainIntentsVerifierBase("Chips Intents Verifier", "1") {
require(address(_registry) != address(0), "WRONG_PARAMS");
registry = _registry;
}
// ***** Admin functions *****
function setChipOutFee(address chip, uint256 fee) external onlyAdmin {
// State
chipOutFeeForChip[chip] = fee;
// Events
emit ChipOutFeeSet(chip, fee);
}
function setLzEndpointId(uint16 evmId, uint16 lzEid) external onlyAdmin {
require(evmId != 0, "NO_EVM_ID");
require(lzEid != 0, "NO_LZ_EID");
require(evmIdToLzEid[evmId] == 0, "ALREADY_SET");
evmIdToLzEid[evmId] = lzEid;
emit LzEidSet(evmId, lzEid);
}
function setFeesReceiver(address receiver) external onlyAdmin {
// State
feesReceiver = receiver;
// Events
emit FeesReceiverSet(receiver);
}
function setWrapNativeChipInOutHelper(
OFT oftChip,
WrapNativeChipInOutHelper _wrapNativeChipInOutHelper
) external onlyAdmin {
// State
wrapNativeChipInOutHelpers[oftChip] = _wrapNativeChipInOutHelper;
// Events
emit NativeChipInOutHelperSet(oftChip, _wrapNativeChipInOutHelper);
}
function forceChipOut(
address chip,
address holder,
uint256 amount
) external payable onlyAdmin {
require(holder != address(0), "RECEIVER_ZERO");
require(amount > 0, "AMOUNT_ZERO");
require(!isContract(holder), "HOLDER_IS_CONTRACT");
(, uint256 chainId) = getDomainSeparatorAndChainForAssetInternal(chip);
address receiver = holder;
(uint256 amountAfterFeeWithoutDust, uint256 fee) = chipOut(
chip,
holder,
receiver,
amount,
chainId,
false
);
// Events
emit ForceChipOut(
chip,
holder,
ChipsIntentsVerifierActions.CHIP_OUT_LZ,
amountAfterFeeWithoutDust,
fee
);
}
// ***** ChipHolder Interactions -- Direct Actions *****
function verifyIntent_chipOut(
HolderRequestPayload_ChipOutLZ calldata payload,
uint8 v,
bytes32 r,
bytes32 s
) external payable {
(
bytes32 domainSeparator,
uint256 chainId
) = getDomainSeparatorAndChainForAssetInternal(payload.chip);
address recoveredSigner = recoverChipOutLZPayloadSigner(
payload,
v,
r,
s,
domainSeparator
);
require(
recoveredSigner == payload.holder ||
isIntentPermitted(payload.chip, payload.holder, recoveredSigner),
"HOLDER_NOT_SIGNER"
);
require(payload.receiver == payload.holder, "HOLDER_NOT_RECEIVER");
require(payload.amount > 0, "AMOUNT_ZERO");
// Validate & Register Nonce
validateNonceForActionAndIncrease(
payload.holder,
uint8(ChipsIntentsVerifierActions.CHIP_OUT_LZ),
payload.nonce
);
(uint256 amountAfterFeeWithoutDust, uint256 fee) = chipOut(
payload.chip,
payload.holder,
payload.receiver,
payload.amount,
chainId,
false
);
// Events
emit ChipsIntentVerified(
msg.sender,
payload.chip,
payload.holder,
ChipsIntentsVerifierActions.CHIP_OUT_LZ,
amountAfterFeeWithoutDust,
fee
);
}
/**
* @notice Interact on behalf of a holder to chip out
*/
function interactOnBehalf_chipOut(
address chip,
address holder,
uint256 amount
) external payable {
(
bytes32 domainSeparator,
uint256 chainId
) = getDomainSeparatorAndChainForAssetInternal(chip);
address permissionedAccount = msg.sender;
require(
isIntentPermitted(chip, holder, permissionedAccount),
"NO_PERMISSION"
);
require(amount > 0, "AMOUNT_ZERO");
address receiver = holder;
(uint256 amountAfterFeeWithoutDust, uint256 fee) = chipOut(
chip,
holder,
receiver,
amount,
chainId,
true
);
// Events
emit InteractedOnBehalf(
chip,
holder,
permissionedAccount,
ChipsIntentsVerifierActions.CHIP_OUT_LZ,
amountAfterFeeWithoutDust,
fee
);
}
function chipOut(
address chip,
address holder,
address receiver,
uint256 amount,
uint256 chainId,
bool skipFee
) internal returns (uint256 amountAfterFeeWithoutDust, uint256 fee) {
(amountAfterFeeWithoutDust, fee) = handleFeesAndTransfers(
chip,
holder,
amount,
skipFee
);
uint16 destChainId = getLZDstChainIdFromEvmChainIdInternal(uint16(chainId));
require(destChainId != 0, "NO_EID_FOR_CHAIN");
bytes memory emptyBytes;
// This assumes 'enforced options' were set for the chip. Otherwise, the call will revert.
SendParam memory sendParam = SendParam({
dstEid: destChainId,
to: addressToBytes32Internal(receiver),
amountLD: amountAfterFeeWithoutDust,
minAmountLD: amountAfterFeeWithoutDust,
extraOptions: emptyBytes,
composeMsg: emptyBytes,
oftCmd: emptyBytes
});
MessagingFee memory messagingFee = MessagingFee({
nativeFee: msg.value,
lzTokenFee: 0
});
address refundAddress = msg.sender;
OFT(chip).send{value: msg.value}(sendParam, messagingFee, refundAddress);
}
function verifyIntent_chipOutAndUnwrap(
HolderRequestPayload_ChipOutLZ_Unwrap calldata payload,
uint8 v,
bytes32 r,
bytes32 s
) external payable {
(
bytes32 domainSeparator,
uint256 chainId
) = getDomainSeparatorAndChainForAssetInternal(payload.chip);
address recoveredSigner = recoverChipOutLZUnwrapPayloadSigner(
payload,
v,
r,
s,
domainSeparator
);
require(
recoveredSigner == payload.holder ||
isIntentPermitted(payload.chip, payload.holder, recoveredSigner),
"HOLDER_NOT_SIGNER"
);
require(payload.receiver == payload.holder, "HOLDER_NOT_RECEIVER");
require(payload.amount > 0, "AMOUNT_ZERO");
WrapNativeChipInOutHelper wrapNativeChipInOutHelper = wrapNativeChipInOutHelpers[
OFT(payload.chip)
];
require(
address(wrapNativeChipInOutHelper) != address(0),
"NO_WRAP_NATIVE_CHIP_IN_OUT_HELPER"
);
// Validate & Register Nonce
validateNonceForActionAndIncrease(
payload.holder,
uint8(ChipsIntentsVerifierActions.CHIP_OUT_LZ_UNWRAP),
payload.nonce
);
(uint256 amountAfterFeeWithoutDust, uint256 fee) = handleFeesAndTransfers(
payload.chip,
payload.holder,
payload.amount,
false
);
uint16 destChainId = getLZDstChainIdFromEvmChainIdInternal(uint16(chainId));
require(destChainId != 0, "NO_EID_FOR_CHAIN");
bytes memory extraOptions = OptionsBuilder
.newOptions()
.addExecutorLzReceiveOption(200000, 0)
.addExecutorLzComposeOption(0, 30000, 0);
// This assumes 'enforced options' were set for the chip. Otherwise, the call will revert.
SendParam memory sendParam = SendParam({
dstEid: destChainId,
to: addressToBytes32Internal(address(wrapNativeChipInOutHelper)),
amountLD: amountAfterFeeWithoutDust,
minAmountLD: amountAfterFeeWithoutDust,
extraOptions: extraOptions,
composeMsg: abi.encode(payload.receiver),
oftCmd: new bytes(0)
});
MessagingFee memory messagingFee = MessagingFee({
nativeFee: msg.value,
lzTokenFee: 0
});
address refundAddress = msg.sender;
OFT(payload.chip).send{value: msg.value}(
sendParam,
messagingFee,
refundAddress
);
// Events
emit ChipsIntentVerified(
msg.sender,
payload.chip,
payload.holder,
ChipsIntentsVerifierActions.CHIP_OUT_LZ_UNWRAP,
amountAfterFeeWithoutDust,
fee
);
}
function handleFeesAndTransfers(
address chip,
address holder,
uint256 amount,
bool skipFee
) internal returns (uint256 amountAfterFeeWithoutDust, uint256 fee) {
// Note : uin256.max means 0
fee = chipOutFeeForChip[chip];
require(fee > 0, "NO_FEE_DEFINED");
if (fee == type(uint256).max || skipFee) {
fee = 0;
}
require(amount > fee, "AMOUNT_LESS_OR_EQUAL_FEE");
// Take the amount from holder
takeChip(chip, holder, amount);
// Send fee to feesReceiver
sendFee(chip, fee);
uint256 decimalConversionRate = OFT(chip).decimalConversionRate();
uint256 amountAfterFee = amount - fee;
amountAfterFeeWithoutDust = _removeDust(
amountAfterFee,
decimalConversionRate
);
uint256 dustChange = amountAfterFee - amountAfterFeeWithoutDust;
// IF there is "dust change" return it to the holder
if (dustChange > 0) {
sendChip(chip, holder, dustChange);
}
}
// ***** Fees Functions *****
function takeChip(address chip, address holder, uint256 feeAmount) internal {
if (feeAmount > 0) {
IERC20(chip).transferFrom(holder, address(this), feeAmount);
}
}
function sendFee(address chip, uint256 feeAmount) internal {
address _feesReceiver = feesReceiver;
require(_feesReceiver != address(0), "NO_FEES_RECEIVER");
sendChip(chip, _feesReceiver, feeAmount);
}
// ***** Chips Functions *****
function sendChip(address chip, address receiver, uint256 amount) internal {
if (amount > 0) {
IERC20(chip).transfer(receiver, amount);
}
}
// ***** Intents Permissions *****
function isIntentPermitted(
address settlementAsset,
address owner,
address spender
) internal view returns (bool) {
string memory dynRoleIntentsPermissionsSuffix = intentsPermissions[
OFTChip(settlementAsset)
];
if (bytes(dynRoleIntentsPermissionsSuffix).length == 0) {
return false;
}
IntentsPermissions intentsPermissionsContract = IntentsPermissions(
registry.getDynamicRoleAddress(
string(
abi.encodePacked(
DYN_ROLE_INTENTS_PERMISSIONS_PREFIX,
dynRoleIntentsPermissionsSuffix
)
)
)
);
if (address(intentsPermissionsContract) == address(0)) {
return false;
}
return
intentsPermissionsContract.permission(
PermissionsType.CHIP_OUT,
owner,
spender
);
}
// ***** Context Utils *****
function _msgSender() public view returns (address) {
return msg.sender;
}
// ***** Signed Payloads Utils *****
function hashChipOutPayload(
HolderRequestPayload_ChipOutLZ memory payload
) internal pure returns (bytes32) {
return
keccak256(
abi.encode(
keccak256(bytes(REQUEST_PAYLOAD_CHIP_OUT_LZ_TYPE_DESCRIPTOR)),
payload.nonce,
payload.chip,
payload.holder,
payload.receiver,
payload.amount
)
);
}
function hashChipOutUnwrapPayload(
HolderRequestPayload_ChipOutLZ_Unwrap memory payload
) internal pure returns (bytes32) {
return
keccak256(
abi.encode(
keccak256(bytes(REQUEST_PAYLOAD_CHIP_OUT_LZ_UNWRAP_TYPE_DESCRIPTOR)),
payload.nonce,
payload.chip,
payload.holder,
payload.receiver,
payload.amount
)
);
}
// ***** Internal Utils *****
function addressToBytes32Internal(
address add
) internal pure returns (bytes32) {
return bytes32(uint256(uint160(add)));
}
function getLZDstChainIdFromEvmChainIdInternal(
uint16 evmChainId
) internal view returns (uint16) {
return evmIdToLzEid[evmChainId];
}
function _removeDust(
uint256 _amount,
uint256 _decimalConversionRate
) internal view virtual returns (uint256 amountWithoutDust) {
amountWithoutDust =
(_amount / _decimalConversionRate) *
_decimalConversionRate;
}
function isContract(address account) internal view returns (bool) {
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.24;
import "../../AdministrationContracts/ClaimableAdmin.sol";
import "../../CryptographyContracts/MultiChainEIP712Base.sol";
import {IntentsPermissions, PermissionsType} from "../../Peripheral/Chips/IntentsPermissions.sol";
import {OFTChip} from "../Chips/OFTChip/OFTChip.sol";
/**
* @title MultiSourceChainIntentsVerifierBase
* @dev Base contract for verifying intents that can be signed with different 'chainId' values.
*/
contract MultiSourceChainIntentsVerifierBase is
ClaimableAdmin,
MultiChainEIP712Base
{
// ***** Storage *****
string public constant DYN_ROLE_INTENTS_PERMISSIONS_PREFIX = "INTENTS_PERMISSIONS_";
// OFTChip => open flag to check for intents permissions
mapping(OFTChip => string) public intentsPermissions;
// ***** Events *****
event SourceChainIdForAssetStored(
address indexed asset,
uint256 indexed chainId
);
// asset => source chain ID
mapping(address => uint256) public sourceChainIdForAsset;
constructor(
string memory _contractDomainName,
string memory _contractDomainVersion
) MultiChainEIP712Base(_contractDomainName, _contractDomainVersion) {}
// ***** Views *****
/**
* @notice Returns the domain separator for the given asset.
* @param asset The asset for which to return the domain separator.
* @return The domain separator for the given asset.
*/
function domainSeparatorForAsset(
address asset
) public view returns (bytes32) {
return domainSeparatorForChain[sourceChainIdForAsset[asset]];
}
// ***** Admin Functions *****
/**
* @notice Stores the source chain ID for the given asset.
* @param asset The asset for which to store the source chain ID.
* @param chainId The source chain ID to store.
*/
function storeSourceChainForAsset(
address asset,
uint256 chainId
) external virtual onlyAdmin {
storeSourceChainForAssetInternal(asset, chainId);
}
/**
* @notice Opens/Closes the intents permissions check for the chip.
* @param oftChip The chip for the intents permissions check.
* @param dynAddressSuffix is a suffix for dynamicly set address in the Registry
*/
function setIntentsPermissions(
OFTChip oftChip,
string calldata dynAddressSuffix
) external onlyAdmin {
intentsPermissions[oftChip] = dynAddressSuffix;
}
// ***** Internals *****
/**
* @notice Stores the source chain ID for the given asset.
* @dev chain Ids for assets cannot be changed.
* @param asset The asset for which to store the source chain ID.
* @param chainId The source chain ID to store.
*/
function storeSourceChainForAssetInternal(
address asset,
uint256 chainId
) internal {
// Can only configure once
require(
sourceChainIdForAsset[asset] == 0,
"CHAIN_ID_FOR_ASSET_ALREADY_CONFIGURED"
);
// Cannot set to zero
require(chainId != 0, "CHAIN_ID_ZERO");
// Ensure domain separator is configured for this chain
generateAndStoreDomainSeparatorIfMissingInternal(chainId);
// Store mapping
sourceChainIdForAsset[asset] = chainId;
// event
emit SourceChainIdForAssetStored(asset, chainId);
}
/**
* @notice Returns the domain separator for the given asset.
* @dev Allows inheriting contracts to get the relevant domain separator for intents verifications.
* @param _asset The asset for which to return the domain separator.
* @return The domain separator for the given asset.
*/
function getDomainSeparatorForAssetInternal(
address _asset
) internal view returns (bytes32) {
(bytes32 domainSeparator, ) = getDomainSeparatorAndChainForAssetInternal(
_asset
);
return domainSeparator;
}
/**
* @notice Returns the domain separator and chain ID for the given asset.
* @dev Allows inheriting contracts to get the relevant domain separator and chain ID for intents verifications.
* @param _asset The asset for which to return the domain separator and chain ID.
* @return The domain separator and chain ID for the given asset.
*/
function getDomainSeparatorAndChainForAssetInternal(
address _asset
) internal view returns (bytes32, uint256) {
uint256 chainId = sourceChainIdForAsset[_asset];
require(chainId != 0, "NO_CHAIN_ID_FOR_ASSET");
bytes32 domainSeparator = domainSeparatorForChain[chainId];
require(domainSeparator != bytes32(0), "NO_DOMAIN_SEPARATOR_FOR_CHAIN");
return (domainSeparator, chainId);
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.24;
/**
* @title AccountAndActionSerialNonceBase
* @notice Base contract for managing serial nonces for actions per account
*/
contract AccountAndActionSerialNonceBase {
// ***** Storage *****
// account => action type => nonce
mapping(address => mapping(uint8 => uint256)) public nonceMap;
// ***** Views *****
/**
* @notice Get the next valid nonce for an account and action type.
* @param account The account to get the nonce for.
* @param actionType The action type to get the nonce for.
* @return The next valid nonce.
*/
function getNextValidNonceFor(
address account,
uint8 actionType
) external view returns (uint256) {
return nonceMap[account][actionType];
}
// ***** Internal *****
/**
* @notice Validate a nonce for an account and action type, and increase the stored counter by 1.
* @param account The account to validate the nonce for.
* @param actionType The action type to validate the nonce for.
* @param nonce The nonce to validate.
*/
function validateNonceForActionAndIncrease(
address account,
uint8 actionType,
uint256 nonce
) internal {
uint256 currentNonceMapValue = nonceMap[account][actionType];
require(nonce == currentNonceMapValue, "INCORRECT_NONCE");
nonceMap[account][actionType] = currentNonceMapValue + 1;
}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.24;
contract ChipEnumsV1 {
enum ChipMode {
NONE,
LOCAL,
REMOTE,
HYBRID
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.24;
interface IGlobalLock {
function lock() external;
function freeLock() external;
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.24;
interface ILzCreditControllerV1 {
function isCreditController() external view returns (bool);
function informLzCreditRequest(
address _to,
uint256 _amountToCreditLD,
uint32 /*_srcEid*/
) external returns (bool isPermitted);
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.24;
interface ILzDebitControllerV1 {
function isDebitController() external view returns (bool);
function informLzDebitRequest(
uint256 _amountToSendLD, // amount to send in local decimals()
uint256 _minAmountToCreditLD, // minimum ammount to credit on the destination
uint32 _dstEid // destination endpoint id
) external returns (bool isPermitted);
function informLzDebitRequestWithSource(
address _debitFrom, // address to debit from
uint256 _amountToSendLD, // amount to send in local decimals()
uint256 _minAmountToCreditLD, // minimum ammount to credit on the destination
uint32 _dstEid // destination endpoint id
) external returns (bool isPermitted);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.24;
import "../../AdministrationContracts/IContractRegistryBase.sol";
import "./IGlobalLock.sol";
interface IRegistryV1Functionality is IContractRegistryBase, IGlobalLock {
// **** Locking mechanism ****
function isTradersPortalAndLocker(
address _address
) external view returns (bool);
function isTriggersAndLocker(address _address) external view returns (bool);
function isTradersPortalOrTriggersAndLocker(
address _address
) external view returns (bool);
}
interface IRegistryV1 is IRegistryV1Functionality {
// **** Public Storage params ****
function feesManagers(address asset) external view returns (address);
function orderBook() external view returns (address);
function tradersPortal() external view returns (address);
function triggers() external view returns (address);
function tradeIntentsVerifier() external view returns (address);
function liquidityIntentsVerifier() external view returns (address);
function chipsIntentsVerifier() external view returns (address);
function lexProxiesFactory() external view returns (address);
function chipsFactory() external view returns (address);
/**
* @return An array of all supported trading floors
*/
function getAllSupportedTradingFloors()
external
view
returns (address[] memory);
/**
* @return An array of all supported settlement assets
*/
function getSettlementAssetsForTradingFloor(
address _tradingFloor
) external view returns (address[] memory);
/**
* @return The spender role address that is set for this chip
*/
function getValidSpenderTargetForChipByRole(
address chip,
string calldata role
) external view returns (address);
/**
* @return the address of the valid 'burnHandler' for the chip
*/
function validBurnHandlerForChip(
address chip
) external view returns (address);
/**
* @return The address matching for the given role
*/
function getDynamicRoleAddress(
string calldata _role
) external view returns (address);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.24;
interface IWrappedNative {
function deposit() external payable returns (uint256);
function withdraw(uint256 amount) external returns (uint256);
}
interface IWrappedNativeNoReturn {
function deposit() external payable;
function withdraw(uint256) external;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.24;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {IOAppComposer} from "@layerzerolabs/lz-evm-oapp-v2/contracts/oapp/interfaces/IOAppComposer.sol";
import {OFTComposeMsgCodec} from "@layerzerolabs/lz-evm-oapp-v2/contracts/oft/libs/OFTComposeMsgCodec.sol";
import "../../AdministrationContracts/ClaimableAdmin.sol";
import "../../Lynx/Chips/OFTChip/OFTChip.sol";
uint8 constant PERMISSIONS_SIZE = 4; // @dev Change PERMISSIONS_SIZE when changing the enum
enum PermissionsType {
// @dev NEVER CHANGE THE ORDER OF THIS ENUM!
NONE,
TRADING,
LIQUIDITY,
CHIP_OUT
}
struct IntentsPermissionsMsg {
bool allow;
PermissionsType permissionsType;
address spender;
}
/**
* @title IntentsPermissions
* @notice Holds permissions for signing intents on behalf of another account
*/
contract IntentsPermissions is IOAppComposer, ClaimableAdmin {
using SafeERC20 for IERC20;
// ***** Events *****
event IntentsPermissionsSet(
PermissionsType indexed permissionsType,
address indexed owner,
address indexed spender,
bool allow
);
event AllowedCreatePermissionsSet(address indexed owner, bool allowed);
event TokensSwept(
address indexed token,
address indexed receiver,
uint256 amount
);
event NativeSwept(address indexed receiver, uint256 amount);
// ***** Immutable Storage *****
OFTChip public immutable oftChip;
IERC20 public immutable oftChipToken;
// ***** Storage *****
// Owner address => isAllowed
mapping(address => bool) public allowedCreatePermissions;
// PermissionsType => owner address => spender address => is approved
mapping(address => mapping(address => bool))[PERMISSIONS_SIZE]
public permissions;
// ***** Views *****
function isAllowedCreatePermissions(
address owner
) public view returns (bool) {
return allowedCreatePermissions[owner];
}
function permission(
PermissionsType permissionsType,
address owner,
address spender
) public view returns (bool) {
return permissions[uint256(permissionsType)][owner][spender];
}
// ***** Constructor *****
constructor(address _oftChip) {
require(_oftChip != address(0), "INVALID_OFT_CHIP");
oftChip = OFTChip(_oftChip);
oftChipToken = IERC20(oftChip.token());
}
// ***** Admin Functions *****
/// @notice Sets the allowedCreatePermissions flag.
/// @param _allowedCreatePermissions The new allowedCreatePermissions flag.
function setAllowedCreatePermissions(
address _allowedCreatePermissions,
bool _allowed
) external onlyAdmin {
allowedCreatePermissions[_allowedCreatePermissions] = _allowed;
emit AllowedCreatePermissionsSet(_allowedCreatePermissions, _allowed);
}
/**
* @notice Sweep any non-underlying tokens from the contract
* @dev Owner can sweep any tokens, this contract should not hold any tokens
* @param _token The token to sweep
* @param _amount The amount to sweep
*/
function sweepTokens(IERC20 _token, uint256 _amount) external onlyAdmin {
_token.safeTransfer(admin, _amount);
emit TokensSwept(address(_token), admin, _amount);
}
/**
* @notice Sweep native coin from the contract
* @dev Owner can sweep any native coin accidentally sent to the contract
* @param _amount The amount to sweep
*/
function sweepNative(uint256 _amount) external onlyAdmin {
payable(admin).transfer(_amount);
emit NativeSwept(admin, _amount);
}
// ***** External Functions *****
/// @notice Handles incoming composed messages from LayerZero.
/// @dev Decodes the message payload to perform intents permission setting and pass tokens to the owner.
/// This method expects the encoded compose message to contain the permissions type, spender and a flag to turn on/off permissions.
/// @param oApp The address of the originating OApp.
/// @param /*guid*/ The globally unique identifier of the message (unused).
/// @param message The encoded message content in the format of the OFTComposeMsgCodec.
/// @param /*Executor*/ Executor address (unused).
/// @param /*Executor Data*/ Additional data for checking for a specific executor (unused).
function lzCompose(
address oApp,
bytes32 /*guid*/,
bytes calldata message,
address /*Executor*/,
bytes calldata /*Executor Data*/
) external payable override {
require(oApp == address(oftChip), "INVALID_OAPP_RECEIVED");
require(
msg.sender == address(oftChip.endpoint()),
"INVALID_ENDPOINT_RECEIVED"
);
// Transfer chips to the sender
uint256 amountLD = OFTComposeMsgCodec.amountLD(message);
address owner = OFTComposeMsgCodec.bytes32ToAddress(
OFTComposeMsgCodec.composeFrom(message)
);
oftChipToken.safeTransfer(owner, amountLD);
// Check if the owner is allowed to create permissions
if (!allowedCreatePermissions[owner]) {
return;
}
// Extract the composed message from the delivered message using the MsgCodec
IntentsPermissionsMsg memory intentsPermissionsMsg = abi.decode(
OFTComposeMsgCodec.composeMsg(message),
(IntentsPermissionsMsg)
);
permissions[uint256(intentsPermissionsMsg.permissionsType)][owner][
intentsPermissionsMsg.spender
] = intentsPermissionsMsg.allow;
// Emit an event to log the given permission
emit IntentsPermissionsSet(
intentsPermissionsMsg.permissionsType,
owner,
intentsPermissionsMsg.spender,
intentsPermissionsMsg.allow
);
}
function setPermissionForSpender(
PermissionsType _permissionsType,
address _spender,
bool _allow
) external {
address owner = msg.sender;
// Check if the owner is allowed to create permissions
if (!allowedCreatePermissions[owner]) {
return;
}
// State
require(
permissions[uint256(_permissionsType)][owner][_spender] != _allow,
"ALREADY_SET"
);
permissions[uint256(_permissionsType)][owner][_spender] = _allow;
// Event
emit IntentsPermissionsSet(_permissionsType, owner, _spender, _allow);
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.24;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "../../Lynx/interfaces/IWrappedNative.sol";
import "../../Lynx/Chips/OFTChip/OFTChipAdapter.sol";
import "../../AdministrationContracts/ClaimableAdmin.sol";
import "@layerzerolabs/lz-evm-oapp-v2/contracts/oft/interfaces/IOFT.sol";
import {IOAppComposer} from "@layerzerolabs/lz-evm-oapp-v2/contracts/oapp/interfaces/IOAppComposer.sol";
import {OFTComposeMsgCodec} from "@layerzerolabs/lz-evm-oapp-v2/contracts/oft/libs/OFTComposeMsgCodec.sol";
/**
* @title WrapNativeChipInOutHelper
* @dev Helper contract for wrapping native tokens and sending them to the OFT chip adapter
* @dev Helper contract for unwrapping native tokens received from the OFT chip adapter through LZ Composer
*/
contract WrapNativeChipInOutHelper is IOAppComposer, ClaimableAdmin {
using SafeERC20 for IERC20;
// ***** Events *****
event TokensSwept(
address indexed token,
address indexed receiver,
uint256 amount
);
event NativeSwept(address indexed receiver, uint256 amount);
event WrapNativeAndSend(bytes32 to, uint256 amountLD);
event UnwrapNativeAndSend(address indexed to, uint256 amountLD);
// ***** Immutable State *****
OFTChipAdapter public immutable oftChipAdapter;
IWrappedNativeNoReturn public immutable wrappedNativeToken;
// ***** Constructor *****
constructor(address _oftChipAdapter) {
require(_oftChipAdapter != address(0), "INVALID_ADAPTER");
oftChipAdapter = OFTChipAdapter(_oftChipAdapter);
wrappedNativeToken = IWrappedNativeNoReturn(oftChipAdapter.token());
// Check wether deposit/withdraw functions are implemented
wrappedNativeToken.deposit{value: 0}();
wrappedNativeToken.withdraw(0);
IERC20(address(wrappedNativeToken)).approve(
address(oftChipAdapter),
type(uint256).max
);
}
// ***** Admin Functions *****
/**
* @notice Sweep any non-underlying tokens from the contract
* @dev Owner can sweep any tokens, this contract should not hold any tokens
* @param _token The token to sweep
* @param _amount The amount to sweep
*/
function sweepTokens(IERC20 _token, uint256 _amount) external onlyAdmin {
_token.safeTransfer(admin, _amount);
emit TokensSwept(address(_token), admin, _amount);
}
/**
* @notice Sweep native coin from the contract
* @dev Owner can sweep any native coin accidentally sent to the contract
* @param _amount The amount to sweep
*/
function sweepNative(uint256 _amount) external onlyAdmin {
payable(admin).transfer(_amount);
emit NativeSwept(admin, _amount);
}
// ***** External Functions *****
function wrapNativeAndSend(
SendParam calldata sendParam,
MessagingFee calldata fee,
address refundAddress
) external payable {
require(msg.value == sendParam.amountLD + fee.nativeFee, "INVALID_AMOUNT");
wrappedNativeToken.deposit{value: sendParam.amountLD}();
oftChipAdapter.send{value: fee.nativeFee}(sendParam, fee, refundAddress);
emit WrapNativeAndSend(sendParam.to, sendParam.amountLD);
}
receive() external payable {}
/// @notice Handles incoming composed messages from LayerZero.
/// @dev Decodes the message payload to perform native token unwrapping.
/// This method expects the encoded compose message to contain the token amount and the recipient address.
/// @param oApp The address of the originating OApp.
/// @param /*guid*/ The globally unique identifier of the message (unused).
/// @param message The encoded message content in the format of the OFTComposeMsgCodec.
/// @param /*Executor*/ Executor address (unused).
/// @param /*Executor Data*/ Additional data for checking for a specific executor (unused).
function lzCompose(
address oApp,
bytes32 /*guid*/,
bytes calldata message,
address /*Executor*/,
bytes calldata /*Executor Data*/
) external payable override {
require(oApp == address(oftChipAdapter), "INVALID_OAPP_RECEIVED");
require(
msg.sender == address(oftChipAdapter.endpoint()),
"INVALID_ENDPOINT_RECEIVED"
);
// Extract the composed message from the delivered message using the MsgCodec
address receiver = abi.decode(
OFTComposeMsgCodec.composeMsg(message),
(address)
);
uint256 amountLD = OFTComposeMsgCodec.amountLD(message);
// Execute the native unwrapping
uint256 balanceBefore = address(this).balance;
wrappedNativeToken.withdraw(amountLD);
uint256 balanceAfter = address(this).balance;
// Transfer the unwrapped native tokens to the receiver
payable(receiver).transfer(balanceAfter - balanceBefore);
// Emit an event to log the token transfer details
emit UnwrapNativeAndSend(receiver, amountLD);
}
}
// SPDX-License-Identifier: Unlicense
/*
* @title Solidity Bytes Arrays Utils
* @author Gonçalo Sá <[email protected]>
*
* @dev Bytes tightly packed arrays utility library for ethereum contracts written in Solidity.
* The library lets you concatenate, slice and type cast bytes arrays both in memory and storage.
*/
pragma solidity >=0.8.0 <0.9.0;
library BytesLib {
function concat(
bytes memory _preBytes,
bytes memory _postBytes
)
internal
pure
returns (bytes memory)
{
bytes memory tempBytes;
assembly {
// Get a location of some free memory and store it in tempBytes as
// Solidity does for memory variables.
tempBytes := mload(0x40)
// Store the length of the first bytes array at the beginning of
// the memory for tempBytes.
let length := mload(_preBytes)
mstore(tempBytes, length)
// Maintain a memory counter for the current write location in the
// temp bytes array by adding the 32 bytes for the array length to
// the starting location.
let mc := add(tempBytes, 0x20)
// Stop copying when the memory counter reaches the length of the
// first bytes array.
let end := add(mc, length)
for {
// Initialize a copy counter to the start of the _preBytes data,
// 32 bytes into its memory.
let cc := add(_preBytes, 0x20)
} lt(mc, end) {
// Increase both counters by 32 bytes each iteration.
mc := add(mc, 0x20)
cc := add(cc, 0x20)
} {
// Write the _preBytes data into the tempBytes memory 32 bytes
// at a time.
mstore(mc, mload(cc))
}
// Add the length of _postBytes to the current length of tempBytes
// and store it as the new length in the first 32 bytes of the
// tempBytes memory.
length := mload(_postBytes)
mstore(tempBytes, add(length, mload(tempBytes)))
// Move the memory counter back from a multiple of 0x20 to the
// actual end of the _preBytes data.
mc := end
// Stop copying when the memory counter reaches the new combined
// length of the arrays.
end := add(mc, length)
for {
let cc := add(_postBytes, 0x20)
} lt(mc, end) {
mc := add(mc, 0x20)
cc := add(cc, 0x20)
} {
mstore(mc, mload(cc))
}
// Update the free-memory pointer by padding our last write location
// to 32 bytes: add 31 bytes to the end of tempBytes to move to the
// next 32 byte block, then round down to the nearest multiple of
// 32. If the sum of the length of the two arrays is zero then add
// one before rounding down to leave a blank 32 bytes (the length block with 0).
mstore(0x40, and(
add(add(end, iszero(add(length, mload(_preBytes)))), 31),
not(31) // Round down to the nearest 32 bytes.
))
}
return tempBytes;
}
function concatStorage(bytes storage _preBytes, bytes memory _postBytes) internal {
assembly {
// Read the first 32 bytes of _preBytes storage, which is the length
// of the array. (We don't need to use the offset into the slot
// because arrays use the entire slot.)
let fslot := sload(_preBytes.slot)
// Arrays of 31 bytes or less have an even value in their slot,
// while longer arrays have an odd value. The actual length is
// the slot divided by two for odd values, and the lowest order
// byte divided by two for even values.
// If the slot is even, bitwise and the slot with 255 and divide by
// two to get the length. If the slot is odd, bitwise and the slot
// with -1 and divide by two.
let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
let mlength := mload(_postBytes)
let newlength := add(slength, mlength)
// slength can contain both the length and contents of the array
// if length < 32 bytes so let's prepare for that
// v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
switch add(lt(slength, 32), lt(newlength, 32))
case 2 {
// Since the new array still fits in the slot, we just need to
// update the contents of the slot.
// uint256(bytes_storage) = uint256(bytes_storage) + uint256(bytes_memory) + new_length
sstore(
_preBytes.slot,
// all the modifications to the slot are inside this
// next block
add(
// we can just add to the slot contents because the
// bytes we want to change are the LSBs
fslot,
add(
mul(
div(
// load the bytes from memory
mload(add(_postBytes, 0x20)),
// zero all bytes to the right
exp(0x100, sub(32, mlength))
),
// and now shift left the number of bytes to
// leave space for the length in the slot
exp(0x100, sub(32, newlength))
),
// increase length by the double of the memory
// bytes length
mul(mlength, 2)
)
)
)
}
case 1 {
// The stored value fits in the slot, but the combined value
// will exceed it.
// get the keccak hash to get the contents of the array
mstore(0x0, _preBytes.slot)
let sc := add(keccak256(0x0, 0x20), div(slength, 32))
// save new length
sstore(_preBytes.slot, add(mul(newlength, 2), 1))
// The contents of the _postBytes array start 32 bytes into
// the structure. Our first read should obtain the `submod`
// bytes that can fit into the unused space in the last word
// of the stored array. To get this, we read 32 bytes starting
// from `submod`, so the data we read overlaps with the array
// contents by `submod` bytes. Masking the lowest-order
// `submod` bytes allows us to add that value directly to the
// stored value.
let submod := sub(32, slength)
let mc := add(_postBytes, submod)
let end := add(_postBytes, mlength)
let mask := sub(exp(0x100, submod), 1)
sstore(
sc,
add(
and(
fslot,
0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00
),
and(mload(mc), mask)
)
)
for {
mc := add(mc, 0x20)
sc := add(sc, 1)
} lt(mc, end) {
sc := add(sc, 1)
mc := add(mc, 0x20)
} {
sstore(sc, mload(mc))
}
mask := exp(0x100, sub(mc, end))
sstore(sc, mul(div(mload(mc), mask), mask))
}
default {
// get the keccak hash to get the contents of the array
mstore(0x0, _preBytes.slot)
// Start copying to the last used word of the stored array.
let sc := add(keccak256(0x0, 0x20), div(slength, 32))
// save new length
sstore(_preBytes.slot, add(mul(newlength, 2), 1))
// Copy over the first `submod` bytes of the new data as in
// case 1 above.
let slengthmod := mod(slength, 32)
let mlengthmod := mod(mlength, 32)
let submod := sub(32, slengthmod)
let mc := add(_postBytes, submod)
let end := add(_postBytes, mlength)
let mask := sub(exp(0x100, submod), 1)
sstore(sc, add(sload(sc), and(mload(mc), mask)))
for {
sc := add(sc, 1)
mc := add(mc, 0x20)
} lt(mc, end) {
sc := add(sc, 1)
mc := add(mc, 0x20)
} {
sstore(sc, mload(mc))
}
mask := exp(0x100, sub(mc, end))
sstore(sc, mul(div(mload(mc), mask), mask))
}
}
}
function slice(
bytes memory _bytes,
uint256 _start,
uint256 _length
)
internal
pure
returns (bytes memory)
{
require(_length + 31 >= _length, "slice_overflow");
require(_bytes.length >= _start + _length, "slice_outOfBounds");
bytes memory tempBytes;
assembly {
switch iszero(_length)
case 0 {
// Get a location of some free memory and store it in tempBytes as
// Solidity does for memory variables.
tempBytes := mload(0x40)
// The first word of the slice result is potentially a partial
// word read from the original array. To read it, we calculate
// the length of that partial word and start copying that many
// bytes into the array. The first word we copy will start with
// data we don't care about, but the last `lengthmod` bytes will
// land at the beginning of the contents of the new array. When
// we're done copying, we overwrite the full first word with
// the actual length of the slice.
let lengthmod := and(_length, 31)
// The multiplication in the next line is necessary
// because when slicing multiples of 32 bytes (lengthmod == 0)
// the following copy loop was copying the origin's length
// and then ending prematurely not copying everything it should.
let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
let end := add(mc, _length)
for {
// The multiplication in the next line has the same exact purpose
// as the one above.
let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
} lt(mc, end) {
mc := add(mc, 0x20)
cc := add(cc, 0x20)
} {
mstore(mc, mload(cc))
}
mstore(tempBytes, _length)
//update free-memory pointer
//allocating the array padded to 32 bytes like the compiler does now
mstore(0x40, and(add(mc, 31), not(31)))
}
//if we want a zero-length slice let's just return a zero-length array
default {
tempBytes := mload(0x40)
//zero out the 32 bytes slice we are about to return
//we need to do it because Solidity does not garbage collect
mstore(tempBytes, 0)
mstore(0x40, add(tempBytes, 0x20))
}
}
return tempBytes;
}
function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
require(_bytes.length >= _start + 20, "toAddress_outOfBounds");
address tempAddress;
assembly {
tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
}
return tempAddress;
}
function toUint8(bytes memory _bytes, uint256 _start) internal pure returns (uint8) {
require(_bytes.length >= _start + 1 , "toUint8_outOfBounds");
uint8 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x1), _start))
}
return tempUint;
}
function toUint16(bytes memory _bytes, uint256 _start) internal pure returns (uint16) {
require(_bytes.length >= _start + 2, "toUint16_outOfBounds");
uint16 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x2), _start))
}
return tempUint;
}
function toUint32(bytes memory _bytes, uint256 _start) internal pure returns (uint32) {
require(_bytes.length >= _start + 4, "toUint32_outOfBounds");
uint32 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x4), _start))
}
return tempUint;
}
function toUint64(bytes memory _bytes, uint256 _start) internal pure returns (uint64) {
require(_bytes.length >= _start + 8, "toUint64_outOfBounds");
uint64 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x8), _start))
}
return tempUint;
}
function toUint96(bytes memory _bytes, uint256 _start) internal pure returns (uint96) {
require(_bytes.length >= _start + 12, "toUint96_outOfBounds");
uint96 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0xc), _start))
}
return tempUint;
}
function toUint128(bytes memory _bytes, uint256 _start) internal pure returns (uint128) {
require(_bytes.length >= _start + 16, "toUint128_outOfBounds");
uint128 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x10), _start))
}
return tempUint;
}
function toUint256(bytes memory _bytes, uint256 _start) internal pure returns (uint256) {
require(_bytes.length >= _start + 32, "toUint256_outOfBounds");
uint256 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x20), _start))
}
return tempUint;
}
function toBytes32(bytes memory _bytes, uint256 _start) internal pure returns (bytes32) {
require(_bytes.length >= _start + 32, "toBytes32_outOfBounds");
bytes32 tempBytes32;
assembly {
tempBytes32 := mload(add(add(_bytes, 0x20), _start))
}
return tempBytes32;
}
function equal(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
bool success = true;
assembly {
let length := mload(_preBytes)
// if lengths don't match the arrays are not equal
switch eq(length, mload(_postBytes))
case 1 {
// cb is a circuit breaker in the for loop since there's
// no said feature for inline assembly loops
// cb = 1 - don't breaker
// cb = 0 - break
let cb := 1
let mc := add(_preBytes, 0x20)
let end := add(mc, length)
for {
let cc := add(_postBytes, 0x20)
// the next line is the loop condition:
// while(uint256(mc < end) + cb == 2)
} eq(add(lt(mc, end), cb), 2) {
mc := add(mc, 0x20)
cc := add(cc, 0x20)
} {
// if any of these checks fails then arrays are not equal
if iszero(eq(mload(mc), mload(cc))) {
// unsuccess:
success := 0
cb := 0
}
}
}
default {
// unsuccess:
success := 0
}
}
return success;
}
function equal_nonAligned(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
bool success = true;
assembly {
let length := mload(_preBytes)
// if lengths don't match the arrays are not equal
switch eq(length, mload(_postBytes))
case 1 {
// cb is a circuit breaker in the for loop since there's
// no said feature for inline assembly loops
// cb = 1 - don't breaker
// cb = 0 - break
let cb := 1
let endMinusWord := add(_preBytes, length)
let mc := add(_preBytes, 0x20)
let cc := add(_postBytes, 0x20)
for {
// the next line is the loop condition:
// while(uint256(mc < endWord) + cb == 2)
} eq(add(lt(mc, endMinusWord), cb), 2) {
mc := add(mc, 0x20)
cc := add(cc, 0x20)
} {
// if any of these checks fails then arrays are not equal
if iszero(eq(mload(mc), mload(cc))) {
// unsuccess:
success := 0
cb := 0
}
}
// Only if still successful
// For <1 word tail bytes
if gt(success, 0) {
// Get the remainder of length/32
// length % 32 = AND(length, 32 - 1)
let numTailBytes := and(length, 0x1f)
let mcRem := mload(mc)
let ccRem := mload(cc)
for {
let i := 0
// the next line is the loop condition:
// while(uint256(i < numTailBytes) + cb == 2)
} eq(add(lt(i, numTailBytes), cb), 2) {
i := add(i, 1)
} {
if iszero(eq(byte(i, mcRem), byte(i, ccRem))) {
// unsuccess:
success := 0
cb := 0
}
}
}
}
default {
// unsuccess:
success := 0
}
}
return success;
}
function equalStorage(
bytes storage _preBytes,
bytes memory _postBytes
)
internal
view
returns (bool)
{
bool success = true;
assembly {
// we know _preBytes_offset is 0
let fslot := sload(_preBytes.slot)
// Decode the length of the stored array like in concatStorage().
let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
let mlength := mload(_postBytes)
// if lengths don't match the arrays are not equal
switch eq(slength, mlength)
case 1 {
// slength can contain both the length and contents of the array
// if length < 32 bytes so let's prepare for that
// v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
if iszero(iszero(slength)) {
switch lt(slength, 32)
case 1 {
// blank the last byte which is the length
fslot := mul(div(fslot, 0x100), 0x100)
if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {
// unsuccess:
success := 0
}
}
default {
// cb is a circuit breaker in the for loop since there's
// no said feature for inline assembly loops
// cb = 1 - don't breaker
// cb = 0 - break
let cb := 1
// get the keccak hash to get the contents of the array
mstore(0x0, _preBytes.slot)
let sc := keccak256(0x0, 0x20)
let mc := add(_postBytes, 0x20)
let end := add(mc, mlength)
// the next line is the loop condition:
// while(uint256(mc < end) + cb == 2)
for {} eq(add(lt(mc, end), cb), 2) {
sc := add(sc, 1)
mc := add(mc, 0x20)
} {
if iszero(eq(sload(sc), mload(mc))) {
// unsuccess:
success := 0
cb := 0
}
}
}
}
}
default {
// unsuccess:
success := 0
}
}
return success;
}
}