Contract Name:
TellerWithMultiAssetSupport
Contract Source Code:
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.21;
import {ERC20} from "@solmate/tokens/ERC20.sol";
import {WETH} from "@solmate/tokens/WETH.sol";
import {BoringVault} from "src/base/BoringVault.sol";
import {AccountantWithRateProviders} from "src/base/Roles/AccountantWithRateProviders.sol";
import {FixedPointMathLib} from "@solmate/utils/FixedPointMathLib.sol";
import {SafeTransferLib} from "@solmate/utils/SafeTransferLib.sol";
import {BeforeTransferHook} from "src/interfaces/BeforeTransferHook.sol";
import {Auth, Authority} from "@solmate/auth/Auth.sol";
import {ReentrancyGuard} from "@solmate/utils/ReentrancyGuard.sol";
import {IPausable} from "src/interfaces/IPausable.sol";
contract TellerWithMultiAssetSupport is Auth, BeforeTransferHook, ReentrancyGuard, IPausable {
using FixedPointMathLib for uint256;
using SafeTransferLib for ERC20;
using SafeTransferLib for WETH;
// ========================================= STRUCTS =========================================
/**
* @param allowDeposits bool indicating whether or not deposits are allowed for this asset.
* @param allowWithdraws bool indicating whether or not withdraws are allowed for this asset.
* @param sharePremium uint16 indicating the premium to apply to the shares minted.
* where 40 represents a 40bps reduction in shares minted using this asset.
*/
struct Asset {
bool allowDeposits;
bool allowWithdraws;
uint16 sharePremium;
}
// ========================================= CONSTANTS =========================================
/**
* @notice Native address used to tell the contract to handle native asset deposits.
*/
address internal constant NATIVE = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
/**
* @notice The maximum possible share lock period.
*/
uint256 internal constant MAX_SHARE_LOCK_PERIOD = 3 days;
/**
* @notice The maximum possible share premium that can be set using `updateAssetData`.
* @dev 1,000 or 10%
*/
uint16 internal constant MAX_SHARE_PREMIUM = 1_000;
// ========================================= STATE =========================================
/**
* @notice Mapping ERC20s to their assetData.
*/
mapping(ERC20 => Asset) public assetData;
/**
* @notice The deposit nonce used to map to a deposit hash.
*/
uint96 public depositNonce;
/**
* @notice After deposits, shares are locked to the msg.sender's address
* for `shareLockPeriod`.
* @dev During this time all trasnfers from msg.sender will revert, and
* deposits are refundable.
*/
uint64 public shareLockPeriod;
/**
* @notice Used to pause calls to `deposit` and `depositWithPermit`.
*/
bool public isPaused;
/**
* @dev Maps deposit nonce to keccak256(address receiver, address depositAsset, uint256 depositAmount, uint256 shareAmount, uint256 timestamp, uint256 shareLockPeriod).
*/
mapping(uint256 => bytes32) public publicDepositHistory;
/**
* @notice Maps user address to the time their shares will be unlocked.
*/
mapping(address => uint256) public shareUnlockTime;
/**
* @notice Mapping `from` address to a bool to deny them from transferring shares.
*/
mapping(address => bool) public fromDenyList;
/**
* @notice Mapping `to` address to a bool to deny them from receiving shares.
*/
mapping(address => bool) public toDenyList;
/**
* @notice Mapping `opeartor` address to a bool to deny them from calling `transfer` or `transferFrom`.
*/
mapping(address => bool) public operatorDenyList;
//============================== ERRORS ===============================
error TellerWithMultiAssetSupport__ShareLockPeriodTooLong();
error TellerWithMultiAssetSupport__SharesAreLocked();
error TellerWithMultiAssetSupport__SharesAreUnLocked();
error TellerWithMultiAssetSupport__BadDepositHash();
error TellerWithMultiAssetSupport__AssetNotSupported();
error TellerWithMultiAssetSupport__ZeroAssets();
error TellerWithMultiAssetSupport__MinimumMintNotMet();
error TellerWithMultiAssetSupport__MinimumAssetsNotMet();
error TellerWithMultiAssetSupport__PermitFailedAndAllowanceTooLow();
error TellerWithMultiAssetSupport__ZeroShares();
error TellerWithMultiAssetSupport__DualDeposit();
error TellerWithMultiAssetSupport__Paused();
error TellerWithMultiAssetSupport__TransferDenied(address from, address to, address operator);
error TellerWithMultiAssetSupport__SharePremiumTooLarge();
error TellerWithMultiAssetSupport__CannotDepositNative();
//============================== EVENTS ===============================
event Paused();
event Unpaused();
event AssetDataUpdated(address indexed asset, bool allowDeposits, bool allowWithdraws, uint16 sharePremium);
event Deposit(
uint256 indexed nonce,
address indexed receiver,
address indexed depositAsset,
uint256 depositAmount,
uint256 shareAmount,
uint256 depositTimestamp,
uint256 shareLockPeriodAtTimeOfDeposit
);
event BulkDeposit(address indexed asset, uint256 depositAmount);
event BulkWithdraw(address indexed asset, uint256 shareAmount);
event DepositRefunded(uint256 indexed nonce, bytes32 depositHash, address indexed user);
event DenyFrom(address indexed user);
event DenyTo(address indexed user);
event DenyOperator(address indexed user);
event AllowFrom(address indexed user);
event AllowTo(address indexed user);
event AllowOperator(address indexed user);
// =============================== MODIFIERS ===============================
/**
* @notice Reverts if the deposit asset is the native asset.
*/
modifier revertOnNativeDeposit(address depositAsset) {
if (depositAsset == NATIVE) revert TellerWithMultiAssetSupport__CannotDepositNative();
_;
}
//============================== IMMUTABLES ===============================
/**
* @notice The BoringVault this contract is working with.
*/
BoringVault public immutable vault;
/**
* @notice The AccountantWithRateProviders this contract is working with.
*/
AccountantWithRateProviders public immutable accountant;
/**
* @notice One share of the BoringVault.
*/
uint256 internal immutable ONE_SHARE;
/**
* @notice The native wrapper contract.
*/
WETH public immutable nativeWrapper;
constructor(address _owner, address _vault, address _accountant, address _weth)
Auth(_owner, Authority(address(0)))
{
vault = BoringVault(payable(_vault));
ONE_SHARE = 10 ** vault.decimals();
accountant = AccountantWithRateProviders(_accountant);
nativeWrapper = WETH(payable(_weth));
}
// ========================================= ADMIN FUNCTIONS =========================================
/**
* @notice Pause this contract, which prevents future calls to `deposit` and `depositWithPermit`.
* @dev Callable by MULTISIG_ROLE.
*/
function pause() external requiresAuth {
isPaused = true;
emit Paused();
}
/**
* @notice Unpause this contract, which allows future calls to `deposit` and `depositWithPermit`.
* @dev Callable by MULTISIG_ROLE.
*/
function unpause() external requiresAuth {
isPaused = false;
emit Unpaused();
}
/**
* @notice Updates the asset data for a given asset.
* @dev The accountant must also support pricing this asset, else the `deposit` call will revert.
* @dev Callable by OWNER_ROLE.
*/
function updateAssetData(ERC20 asset, bool allowDeposits, bool allowWithdraws, uint16 sharePremium)
external
requiresAuth
{
if (sharePremium > MAX_SHARE_PREMIUM) revert TellerWithMultiAssetSupport__SharePremiumTooLarge();
assetData[asset] = Asset(allowDeposits, allowWithdraws, sharePremium);
emit AssetDataUpdated(address(asset), allowDeposits, allowWithdraws, sharePremium);
}
/**
* @notice Sets the share lock period.
* @dev This not only locks shares to the user address, but also serves as the pending deposit period, where deposits can be reverted.
* @dev If a new shorter share lock period is set, users with pending share locks could make a new deposit to receive 1 wei shares,
* and have their shares unlock sooner than their original deposit allows. This state would allow for the user deposit to be refunded,
* but only if they have not transferred their shares out of there wallet. This is an accepted limitation, and should be known when decreasing
* the share lock period.
* @dev Callable by OWNER_ROLE.
*/
function setShareLockPeriod(uint64 _shareLockPeriod) external requiresAuth {
if (_shareLockPeriod > MAX_SHARE_LOCK_PERIOD) revert TellerWithMultiAssetSupport__ShareLockPeriodTooLong();
shareLockPeriod = _shareLockPeriod;
}
/**
* @notice Deny a user from transferring or receiving shares.
* @dev Callable by OWNER_ROLE, and DENIER_ROLE.
*/
function denyAll(address user) external requiresAuth {
fromDenyList[user] = true;
toDenyList[user] = true;
operatorDenyList[user] = true;
emit DenyFrom(user);
emit DenyTo(user);
emit DenyOperator(user);
}
/**
* @notice Allow a user to transfer or receive shares.
* @dev Callable by OWNER_ROLE, and DENIER_ROLE.
*/
function allowAll(address user) external requiresAuth {
fromDenyList[user] = false;
toDenyList[user] = false;
operatorDenyList[user] = false;
emit AllowFrom(user);
emit AllowTo(user);
emit AllowOperator(user);
}
/**
* @notice Deny a user from transferring shares.
* @dev Callable by OWNER_ROLE, and DENIER_ROLE.
*/
function denyFrom(address user) external requiresAuth {
fromDenyList[user] = true;
emit DenyFrom(user);
}
/**
* @notice Allow a user to transfer shares.
* @dev Callable by OWNER_ROLE, and DENIER_ROLE.
*/
function allowFrom(address user) external requiresAuth {
fromDenyList[user] = false;
emit AllowFrom(user);
}
/**
* @notice Deny a user from receiving shares.
* @dev Callable by OWNER_ROLE, and DENIER_ROLE.
*/
function denyTo(address user) external requiresAuth {
toDenyList[user] = true;
emit DenyTo(user);
}
/**
* @notice Allow a user to receive shares.
* @dev Callable by OWNER_ROLE, and DENIER_ROLE.
*/
function allowTo(address user) external requiresAuth {
toDenyList[user] = false;
emit AllowTo(user);
}
/**
* @notice Deny an operator from transferring shares.
* @dev Callable by OWNER_ROLE, and DENIER_ROLE.
*/
function denyOperator(address user) external requiresAuth {
operatorDenyList[user] = true;
emit DenyOperator(user);
}
/**
* @notice Allow an operator to transfer shares.
* @dev Callable by OWNER_ROLE, and DENIER_ROLE.
*/
function allowOperator(address user) external requiresAuth {
operatorDenyList[user] = false;
emit AllowOperator(user);
}
// ========================================= BeforeTransferHook FUNCTIONS =========================================
/**
* @notice Implement beforeTransfer hook to check if shares are locked, or if `from`, `to`, or `operator` are on the deny list.
* @notice If share lock period is set to zero, then users will be able to mint and transfer in the same tx.
* if this behavior is not desired then a share lock period of >=1 should be used.
*/
function beforeTransfer(address from, address to, address operator) public view virtual {
if (fromDenyList[from] || toDenyList[to] || operatorDenyList[operator]) {
revert TellerWithMultiAssetSupport__TransferDenied(from, to, operator);
}
if (shareUnlockTime[from] > block.timestamp) revert TellerWithMultiAssetSupport__SharesAreLocked();
}
// ========================================= REVERT DEPOSIT FUNCTIONS =========================================
/**
* @notice Allows DEPOSIT_REFUNDER_ROLE to revert a pending deposit.
* @dev Once a deposit share lock period has passed, it can no longer be reverted.
* @dev It is possible the admin does not setup the BoringVault to call the transfer hook,
* but this contract can still be saving share lock state. In the event this happens
* deposits are still refundable if the user has not transferred their shares.
* But there is no guarantee that the user has not transferred their shares.
* @dev Callable by STRATEGIST_MULTISIG_ROLE.
*/
function refundDeposit(
uint256 nonce,
address receiver,
address depositAsset,
uint256 depositAmount,
uint256 shareAmount,
uint256 depositTimestamp,
uint256 shareLockUpPeriodAtTimeOfDeposit
) external requiresAuth {
if ((block.timestamp - depositTimestamp) >= shareLockUpPeriodAtTimeOfDeposit) {
// Shares are already unlocked, so we can not revert deposit.
revert TellerWithMultiAssetSupport__SharesAreUnLocked();
}
bytes32 depositHash = keccak256(
abi.encode(
receiver, depositAsset, depositAmount, shareAmount, depositTimestamp, shareLockUpPeriodAtTimeOfDeposit
)
);
if (publicDepositHistory[nonce] != depositHash) revert TellerWithMultiAssetSupport__BadDepositHash();
// Delete hash to prevent refund gas.
delete publicDepositHistory[nonce];
// If deposit used native asset, send user back wrapped native asset.
depositAsset = depositAsset == NATIVE ? address(nativeWrapper) : depositAsset;
// Burn shares and refund assets to receiver.
vault.exit(receiver, ERC20(depositAsset), depositAmount, receiver, shareAmount);
emit DepositRefunded(nonce, depositHash, receiver);
}
// ========================================= USER FUNCTIONS =========================================
/**
* @notice Allows users to deposit into the BoringVault, if this contract is not paused.
* @dev Publicly callable.
*/
function deposit(ERC20 depositAsset, uint256 depositAmount, uint256 minimumMint)
external
payable
requiresAuth
nonReentrant
returns (uint256 shares)
{
Asset memory asset = _beforeDeposit(depositAsset);
address from;
if (address(depositAsset) == NATIVE) {
if (msg.value == 0) revert TellerWithMultiAssetSupport__ZeroAssets();
nativeWrapper.deposit{value: msg.value}();
// Set depositAmount to msg.value.
depositAmount = msg.value;
nativeWrapper.safeApprove(address(vault), depositAmount);
// Update depositAsset to nativeWrapper.
depositAsset = nativeWrapper;
// Set from to this address since user transferred value.
from = address(this);
} else {
if (msg.value > 0) revert TellerWithMultiAssetSupport__DualDeposit();
from = msg.sender;
}
shares = _erc20Deposit(depositAsset, depositAmount, minimumMint, from, msg.sender, asset);
_afterPublicDeposit(msg.sender, depositAsset, depositAmount, shares, shareLockPeriod);
}
/**
* @notice Allows users to deposit into BoringVault using permit.
* @dev Publicly callable.
*/
function depositWithPermit(
ERC20 depositAsset,
uint256 depositAmount,
uint256 minimumMint,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external requiresAuth nonReentrant revertOnNativeDeposit(address(depositAsset)) returns (uint256 shares) {
Asset memory asset = _beforeDeposit(depositAsset);
_handlePermit(depositAsset, depositAmount, deadline, v, r, s);
shares = _erc20Deposit(depositAsset, depositAmount, minimumMint, msg.sender, msg.sender, asset);
_afterPublicDeposit(msg.sender, depositAsset, depositAmount, shares, shareLockPeriod);
}
/**
* @notice Allows on ramp role to deposit into this contract.
* @dev Does NOT support native deposits.
* @dev Callable by SOLVER_ROLE.
*/
function bulkDeposit(ERC20 depositAsset, uint256 depositAmount, uint256 minimumMint, address to)
external
requiresAuth
nonReentrant
returns (uint256 shares)
{
Asset memory asset = _beforeDeposit(depositAsset);
shares = _erc20Deposit(depositAsset, depositAmount, minimumMint, msg.sender, to, asset);
emit BulkDeposit(address(depositAsset), depositAmount);
}
/**
* @notice Allows off ramp role to withdraw from this contract.
* @dev Callable by SOLVER_ROLE.
*/
function bulkWithdraw(ERC20 withdrawAsset, uint256 shareAmount, uint256 minimumAssets, address to)
external
requiresAuth
returns (uint256 assetsOut)
{
if (isPaused) revert TellerWithMultiAssetSupport__Paused();
Asset memory asset = assetData[withdrawAsset];
if (!asset.allowWithdraws) revert TellerWithMultiAssetSupport__AssetNotSupported();
if (shareAmount == 0) revert TellerWithMultiAssetSupport__ZeroShares();
assetsOut = shareAmount.mulDivDown(accountant.getRateInQuoteSafe(withdrawAsset), ONE_SHARE);
if (assetsOut < minimumAssets) revert TellerWithMultiAssetSupport__MinimumAssetsNotMet();
vault.exit(to, withdrawAsset, assetsOut, msg.sender, shareAmount);
emit BulkWithdraw(address(withdrawAsset), shareAmount);
}
// ========================================= INTERNAL HELPER FUNCTIONS =========================================
/**
* @notice Implements a common ERC20 deposit into BoringVault.
*/
function _erc20Deposit(
ERC20 depositAsset,
uint256 depositAmount,
uint256 minimumMint,
address from,
address to,
Asset memory asset
) internal returns (uint256 shares) {
if (depositAmount == 0) revert TellerWithMultiAssetSupport__ZeroAssets();
shares = depositAmount.mulDivDown(ONE_SHARE, accountant.getRateInQuoteSafe(depositAsset));
shares = asset.sharePremium > 0 ? shares.mulDivDown(1e4 - asset.sharePremium, 1e4) : shares;
if (shares < minimumMint) revert TellerWithMultiAssetSupport__MinimumMintNotMet();
vault.enter(from, depositAsset, depositAmount, to, shares);
}
/**
* @notice Handle pre-deposit checks.
*/
function _beforeDeposit(ERC20 depositAsset) internal view returns (Asset memory asset) {
if (isPaused) revert TellerWithMultiAssetSupport__Paused();
asset = assetData[depositAsset];
if (!asset.allowDeposits) revert TellerWithMultiAssetSupport__AssetNotSupported();
}
/**
* @notice Handle share lock logic, and event.
*/
function _afterPublicDeposit(
address user,
ERC20 depositAsset,
uint256 depositAmount,
uint256 shares,
uint256 currentShareLockPeriod
) internal {
// Increment then assign as its slightly more gas efficient.
uint256 nonce = ++depositNonce;
// Only set share unlock time and history if share lock period is greater than 0.
if (currentShareLockPeriod > 0) {
shareUnlockTime[user] = block.timestamp + currentShareLockPeriod;
publicDepositHistory[nonce] = keccak256(
abi.encode(user, depositAsset, depositAmount, shares, block.timestamp, currentShareLockPeriod)
);
}
emit Deposit(nonce, user, address(depositAsset), depositAmount, shares, block.timestamp, currentShareLockPeriod);
}
/**
* @notice Handle permit logic.
*/
function _handlePermit(ERC20 depositAsset, uint256 depositAmount, uint256 deadline, uint8 v, bytes32 r, bytes32 s)
internal
{
try depositAsset.permit(msg.sender, address(vault), depositAmount, deadline, v, r, s) {}
catch {
if (depositAsset.allowance(msg.sender, address(vault)) < depositAmount) {
revert TellerWithMultiAssetSupport__PermitFailedAndAllowanceTooLow();
}
}
}
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;
/// @notice Modern and gas efficient ERC20 + EIP-2612 implementation.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/tokens/ERC20.sol)
/// @author Modified from Uniswap (https://github.com/Uniswap/uniswap-v2-core/blob/master/contracts/UniswapV2ERC20.sol)
/// @dev Do not manually set balances without updating totalSupply, as the sum of all user balances must not exceed it.
abstract contract ERC20 {
/*//////////////////////////////////////////////////////////////
EVENTS
//////////////////////////////////////////////////////////////*/
event Transfer(address indexed from, address indexed to, uint256 amount);
event Approval(address indexed owner, address indexed spender, uint256 amount);
/*//////////////////////////////////////////////////////////////
METADATA STORAGE
//////////////////////////////////////////////////////////////*/
string public name;
string public symbol;
uint8 public immutable decimals;
/*//////////////////////////////////////////////////////////////
ERC20 STORAGE
//////////////////////////////////////////////////////////////*/
uint256 public totalSupply;
mapping(address => uint256) public balanceOf;
mapping(address => mapping(address => uint256)) public allowance;
/*//////////////////////////////////////////////////////////////
EIP-2612 STORAGE
//////////////////////////////////////////////////////////////*/
uint256 internal immutable INITIAL_CHAIN_ID;
bytes32 internal immutable INITIAL_DOMAIN_SEPARATOR;
mapping(address => uint256) public nonces;
/*//////////////////////////////////////////////////////////////
CONSTRUCTOR
//////////////////////////////////////////////////////////////*/
constructor(
string memory _name,
string memory _symbol,
uint8 _decimals
) {
name = _name;
symbol = _symbol;
decimals = _decimals;
INITIAL_CHAIN_ID = block.chainid;
INITIAL_DOMAIN_SEPARATOR = computeDomainSeparator();
}
/*//////////////////////////////////////////////////////////////
ERC20 LOGIC
//////////////////////////////////////////////////////////////*/
function approve(address spender, uint256 amount) public virtual returns (bool) {
allowance[msg.sender][spender] = amount;
emit Approval(msg.sender, spender, amount);
return true;
}
function transfer(address to, uint256 amount) public virtual returns (bool) {
balanceOf[msg.sender] -= amount;
// Cannot overflow because the sum of all user
// balances can't exceed the max uint256 value.
unchecked {
balanceOf[to] += amount;
}
emit Transfer(msg.sender, to, amount);
return true;
}
function transferFrom(
address from,
address to,
uint256 amount
) public virtual returns (bool) {
uint256 allowed = allowance[from][msg.sender]; // Saves gas for limited approvals.
if (allowed != type(uint256).max) allowance[from][msg.sender] = allowed - amount;
balanceOf[from] -= amount;
// Cannot overflow because the sum of all user
// balances can't exceed the max uint256 value.
unchecked {
balanceOf[to] += amount;
}
emit Transfer(from, to, amount);
return true;
}
/*//////////////////////////////////////////////////////////////
EIP-2612 LOGIC
//////////////////////////////////////////////////////////////*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) public virtual {
require(deadline >= block.timestamp, "PERMIT_DEADLINE_EXPIRED");
// Unchecked because the only math done is incrementing
// the owner's nonce which cannot realistically overflow.
unchecked {
address recoveredAddress = ecrecover(
keccak256(
abi.encodePacked(
"\x19\x01",
DOMAIN_SEPARATOR(),
keccak256(
abi.encode(
keccak256(
"Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)"
),
owner,
spender,
value,
nonces[owner]++,
deadline
)
)
)
),
v,
r,
s
);
require(recoveredAddress != address(0) && recoveredAddress == owner, "INVALID_SIGNER");
allowance[recoveredAddress][spender] = value;
}
emit Approval(owner, spender, value);
}
function DOMAIN_SEPARATOR() public view virtual returns (bytes32) {
return block.chainid == INITIAL_CHAIN_ID ? INITIAL_DOMAIN_SEPARATOR : computeDomainSeparator();
}
function computeDomainSeparator() internal view virtual returns (bytes32) {
return
keccak256(
abi.encode(
keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"),
keccak256(bytes(name)),
keccak256("1"),
block.chainid,
address(this)
)
);
}
/*//////////////////////////////////////////////////////////////
INTERNAL MINT/BURN LOGIC
//////////////////////////////////////////////////////////////*/
function _mint(address to, uint256 amount) internal virtual {
totalSupply += amount;
// Cannot overflow because the sum of all user
// balances can't exceed the max uint256 value.
unchecked {
balanceOf[to] += amount;
}
emit Transfer(address(0), to, amount);
}
function _burn(address from, uint256 amount) internal virtual {
balanceOf[from] -= amount;
// Cannot underflow because a user's balance
// will never be larger than the total supply.
unchecked {
totalSupply -= amount;
}
emit Transfer(from, address(0), amount);
}
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;
import {ERC20} from "./ERC20.sol";
import {SafeTransferLib} from "../utils/SafeTransferLib.sol";
/// @notice Minimalist and modern Wrapped Ether implementation.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/tokens/WETH.sol)
/// @author Inspired by WETH9 (https://github.com/dapphub/ds-weth/blob/master/src/weth9.sol)
contract WETH is ERC20("Wrapped Ether", "WETH", 18) {
using SafeTransferLib for address;
event Deposit(address indexed from, uint256 amount);
event Withdrawal(address indexed to, uint256 amount);
function deposit() public payable virtual {
_mint(msg.sender, msg.value);
emit Deposit(msg.sender, msg.value);
}
function withdraw(uint256 amount) public virtual {
_burn(msg.sender, amount);
emit Withdrawal(msg.sender, amount);
msg.sender.safeTransferETH(amount);
}
receive() external payable virtual {
deposit();
}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.21;
import {Address} from "@openzeppelin/contracts/utils/Address.sol";
import {ERC721Holder} from "@openzeppelin/contracts/token/ERC721/utils/ERC721Holder.sol";
import {ERC1155Holder} from "@openzeppelin/contracts/token/ERC1155/utils/ERC1155Holder.sol";
import {FixedPointMathLib} from "@solmate/utils/FixedPointMathLib.sol";
import {SafeTransferLib} from "@solmate/utils/SafeTransferLib.sol";
import {ERC20} from "@solmate/tokens/ERC20.sol";
import {BeforeTransferHook} from "src/interfaces/BeforeTransferHook.sol";
import {Auth, Authority} from "@solmate/auth/Auth.sol";
contract BoringVault is ERC20, Auth, ERC721Holder, ERC1155Holder {
using Address for address;
using SafeTransferLib for ERC20;
using FixedPointMathLib for uint256;
// ========================================= STATE =========================================
/**
* @notice Contract responsbile for implementing `beforeTransfer`.
*/
BeforeTransferHook public hook;
//============================== EVENTS ===============================
event Enter(address indexed from, address indexed asset, uint256 amount, address indexed to, uint256 shares);
event Exit(address indexed to, address indexed asset, uint256 amount, address indexed from, uint256 shares);
//============================== CONSTRUCTOR ===============================
constructor(address _owner, string memory _name, string memory _symbol, uint8 _decimals)
ERC20(_name, _symbol, _decimals)
Auth(_owner, Authority(address(0)))
{}
//============================== MANAGE ===============================
/**
* @notice Allows manager to make an arbitrary function call from this contract.
* @dev Callable by MANAGER_ROLE.
*/
function manage(address target, bytes calldata data, uint256 value)
external
requiresAuth
returns (bytes memory result)
{
result = target.functionCallWithValue(data, value);
}
/**
* @notice Allows manager to make arbitrary function calls from this contract.
* @dev Callable by MANAGER_ROLE.
*/
function manage(address[] calldata targets, bytes[] calldata data, uint256[] calldata values)
external
requiresAuth
returns (bytes[] memory results)
{
uint256 targetsLength = targets.length;
results = new bytes[](targetsLength);
for (uint256 i; i < targetsLength; ++i) {
results[i] = targets[i].functionCallWithValue(data[i], values[i]);
}
}
//============================== ENTER ===============================
/**
* @notice Allows minter to mint shares, in exchange for assets.
* @dev If assetAmount is zero, no assets are transferred in.
* @dev Callable by MINTER_ROLE.
*/
function enter(address from, ERC20 asset, uint256 assetAmount, address to, uint256 shareAmount)
external
requiresAuth
{
// Transfer assets in
if (assetAmount > 0) asset.safeTransferFrom(from, address(this), assetAmount);
// Mint shares.
_mint(to, shareAmount);
emit Enter(from, address(asset), assetAmount, to, shareAmount);
}
//============================== EXIT ===============================
/**
* @notice Allows burner to burn shares, in exchange for assets.
* @dev If assetAmount is zero, no assets are transferred out.
* @dev Callable by BURNER_ROLE.
*/
function exit(address to, ERC20 asset, uint256 assetAmount, address from, uint256 shareAmount)
external
requiresAuth
{
// Burn shares.
_burn(from, shareAmount);
// Transfer assets out.
if (assetAmount > 0) asset.safeTransfer(to, assetAmount);
emit Exit(to, address(asset), assetAmount, from, shareAmount);
}
//============================== BEFORE TRANSFER HOOK ===============================
/**
* @notice Sets the share locker.
* @notice If set to zero address, the share locker logic is disabled.
* @dev Callable by OWNER_ROLE.
*/
function setBeforeTransferHook(address _hook) external requiresAuth {
hook = BeforeTransferHook(_hook);
}
/**
* @notice Call `beforeTransferHook` passing in `from` `to`, and `msg.sender`.
*/
function _callBeforeTransfer(address from, address to) internal view {
if (address(hook) != address(0)) hook.beforeTransfer(from, to, msg.sender);
}
function transfer(address to, uint256 amount) public override returns (bool) {
_callBeforeTransfer(msg.sender, to);
return super.transfer(to, amount);
}
function transferFrom(address from, address to, uint256 amount) public override returns (bool) {
_callBeforeTransfer(from, to);
return super.transferFrom(from, to, amount);
}
//============================== RECEIVE ===============================
receive() external payable {}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.21;
import {FixedPointMathLib} from "@solmate/utils/FixedPointMathLib.sol";
import {IRateProvider} from "src/interfaces/IRateProvider.sol";
import {ERC20} from "@solmate/tokens/ERC20.sol";
import {SafeTransferLib} from "@solmate/utils/SafeTransferLib.sol";
import {BoringVault} from "src/base/BoringVault.sol";
import {Auth, Authority} from "@solmate/auth/Auth.sol";
import {IPausable} from "src/interfaces/IPausable.sol";
contract AccountantWithRateProviders is Auth, IRateProvider, IPausable {
using FixedPointMathLib for uint256;
using SafeTransferLib for ERC20;
// ========================================= STRUCTS =========================================
/**
* @param payoutAddress the address `claimFees` sends fees to
* @param highwaterMark the highest value of the BoringVault's share price
* @param feesOwedInBase total pending fees owed in terms of base
* @param totalSharesLastUpdate total amount of shares the last exchange rate update
* @param exchangeRate the current exchange rate in terms of base
* @param allowedExchangeRateChangeUpper the max allowed change to exchange rate from an update
* @param allowedExchangeRateChangeLower the min allowed change to exchange rate from an update
* @param lastUpdateTimestamp the block timestamp of the last exchange rate update
* @param isPaused whether or not this contract is paused
* @param minimumUpdateDelayInSeconds the minimum amount of time that must pass between
* exchange rate updates, such that the update won't trigger the contract to be paused
* @param platformFee the platform fee
* @param performanceFee the performance fee
*/
struct AccountantState {
address payoutAddress;
uint96 highwaterMark;
uint128 feesOwedInBase;
uint128 totalSharesLastUpdate;
uint96 exchangeRate;
uint16 allowedExchangeRateChangeUpper;
uint16 allowedExchangeRateChangeLower;
uint64 lastUpdateTimestamp;
bool isPaused;
uint24 minimumUpdateDelayInSeconds;
uint16 platformFee;
uint16 performanceFee;
}
/**
* @param isPeggedToBase whether or not the asset is 1:1 with the base asset
* @param rateProvider the rate provider for this asset if `isPeggedToBase` is false
*/
struct RateProviderData {
bool isPeggedToBase;
IRateProvider rateProvider;
}
// ========================================= STATE =========================================
/**
* @notice Store the accountant state in 3 packed slots.
*/
AccountantState public accountantState;
/**
* @notice Maps ERC20s to their RateProviderData.
*/
mapping(ERC20 => RateProviderData) public rateProviderData;
//============================== ERRORS ===============================
error AccountantWithRateProviders__UpperBoundTooSmall();
error AccountantWithRateProviders__LowerBoundTooLarge();
error AccountantWithRateProviders__PlatformFeeTooLarge();
error AccountantWithRateProviders__PerformanceFeeTooLarge();
error AccountantWithRateProviders__Paused();
error AccountantWithRateProviders__ZeroFeesOwed();
error AccountantWithRateProviders__OnlyCallableByBoringVault();
error AccountantWithRateProviders__UpdateDelayTooLarge();
error AccountantWithRateProviders__ExchangeRateAboveHighwaterMark();
//============================== EVENTS ===============================
event Paused();
event Unpaused();
event DelayInSecondsUpdated(uint24 oldDelay, uint24 newDelay);
event UpperBoundUpdated(uint16 oldBound, uint16 newBound);
event LowerBoundUpdated(uint16 oldBound, uint16 newBound);
event PlatformFeeUpdated(uint16 oldFee, uint16 newFee);
event PerformanceFeeUpdated(uint16 oldFee, uint16 newFee);
event PayoutAddressUpdated(address oldPayout, address newPayout);
event RateProviderUpdated(address asset, bool isPegged, address rateProvider);
event ExchangeRateUpdated(uint96 oldRate, uint96 newRate, uint64 currentTime);
event FeesClaimed(address indexed feeAsset, uint256 amount);
event HighwaterMarkReset();
//============================== IMMUTABLES ===============================
/**
* @notice The base asset rates are provided in.
*/
ERC20 public immutable base;
/**
* @notice The decimals rates are provided in.
*/
uint8 public immutable decimals;
/**
* @notice The BoringVault this accountant is working with.
* Used to determine share supply for fee calculation.
*/
BoringVault public immutable vault;
/**
* @notice One share of the BoringVault.
*/
uint256 internal immutable ONE_SHARE;
constructor(
address _owner,
address _vault,
address payoutAddress,
uint96 startingExchangeRate,
address _base,
uint16 allowedExchangeRateChangeUpper,
uint16 allowedExchangeRateChangeLower,
uint24 minimumUpdateDelayInSeconds,
uint16 platformFee,
uint16 performanceFee
) Auth(_owner, Authority(address(0))) {
base = ERC20(_base);
decimals = ERC20(_base).decimals();
vault = BoringVault(payable(_vault));
ONE_SHARE = 10 ** vault.decimals();
accountantState = AccountantState({
payoutAddress: payoutAddress,
highwaterMark: startingExchangeRate,
feesOwedInBase: 0,
totalSharesLastUpdate: uint128(vault.totalSupply()),
exchangeRate: startingExchangeRate,
allowedExchangeRateChangeUpper: allowedExchangeRateChangeUpper,
allowedExchangeRateChangeLower: allowedExchangeRateChangeLower,
lastUpdateTimestamp: uint64(block.timestamp),
isPaused: false,
minimumUpdateDelayInSeconds: minimumUpdateDelayInSeconds,
platformFee: platformFee,
performanceFee: performanceFee
});
}
// ========================================= ADMIN FUNCTIONS =========================================
/**
* @notice Pause this contract, which prevents future calls to `updateExchangeRate`, and any safe rate
* calls will revert.
* @dev Callable by MULTISIG_ROLE.
*/
function pause() external requiresAuth {
accountantState.isPaused = true;
emit Paused();
}
/**
* @notice Unpause this contract, which allows future calls to `updateExchangeRate`, and any safe rate
* calls will stop reverting.
* @dev Callable by MULTISIG_ROLE.
*/
function unpause() external requiresAuth {
accountantState.isPaused = false;
emit Unpaused();
}
/**
* @notice Update the minimum time delay between `updateExchangeRate` calls.
* @dev There are no input requirements, as it is possible the admin would want
* the exchange rate updated as frequently as needed.
* @dev Callable by OWNER_ROLE.
*/
function updateDelay(uint24 minimumUpdateDelayInSeconds) external requiresAuth {
if (minimumUpdateDelayInSeconds > 14 days) revert AccountantWithRateProviders__UpdateDelayTooLarge();
uint24 oldDelay = accountantState.minimumUpdateDelayInSeconds;
accountantState.minimumUpdateDelayInSeconds = minimumUpdateDelayInSeconds;
emit DelayInSecondsUpdated(oldDelay, minimumUpdateDelayInSeconds);
}
/**
* @notice Update the allowed upper bound change of exchange rate between `updateExchangeRateCalls`.
* @dev Callable by OWNER_ROLE.
*/
function updateUpper(uint16 allowedExchangeRateChangeUpper) external requiresAuth {
if (allowedExchangeRateChangeUpper < 1e4) revert AccountantWithRateProviders__UpperBoundTooSmall();
uint16 oldBound = accountantState.allowedExchangeRateChangeUpper;
accountantState.allowedExchangeRateChangeUpper = allowedExchangeRateChangeUpper;
emit UpperBoundUpdated(oldBound, allowedExchangeRateChangeUpper);
}
/**
* @notice Update the allowed lower bound change of exchange rate between `updateExchangeRateCalls`.
* @dev Callable by OWNER_ROLE.
*/
function updateLower(uint16 allowedExchangeRateChangeLower) external requiresAuth {
if (allowedExchangeRateChangeLower > 1e4) revert AccountantWithRateProviders__LowerBoundTooLarge();
uint16 oldBound = accountantState.allowedExchangeRateChangeLower;
accountantState.allowedExchangeRateChangeLower = allowedExchangeRateChangeLower;
emit LowerBoundUpdated(oldBound, allowedExchangeRateChangeLower);
}
/**
* @notice Update the platform fee to a new value.
* @dev Callable by OWNER_ROLE.
*/
function updatePlatformFee(uint16 platformFee) external requiresAuth {
if (platformFee > 0.2e4) revert AccountantWithRateProviders__PlatformFeeTooLarge();
uint16 oldFee = accountantState.platformFee;
accountantState.platformFee = platformFee;
emit PlatformFeeUpdated(oldFee, platformFee);
}
/**
* @notice Update the performance fee to a new value.
* @dev Callable by OWNER_ROLE.
*/
function updatePerformanceFee(uint16 performanceFee) external requiresAuth {
if (performanceFee > 0.5e4) revert AccountantWithRateProviders__PerformanceFeeTooLarge();
uint16 oldFee = accountantState.performanceFee;
accountantState.performanceFee = performanceFee;
emit PerformanceFeeUpdated(oldFee, performanceFee);
}
/**
* @notice Update the payout address fees are sent to.
* @dev Callable by OWNER_ROLE.
*/
function updatePayoutAddress(address payoutAddress) external requiresAuth {
address oldPayout = accountantState.payoutAddress;
accountantState.payoutAddress = payoutAddress;
emit PayoutAddressUpdated(oldPayout, payoutAddress);
}
/**
* @notice Update the rate provider data for a specific `asset`.
* @dev Rate providers must return rates in terms of `base` or
* an asset pegged to base and they must use the same decimals
* as `asset`.
* @dev Callable by OWNER_ROLE.
*/
function setRateProviderData(ERC20 asset, bool isPeggedToBase, address rateProvider) external requiresAuth {
rateProviderData[asset] =
RateProviderData({isPeggedToBase: isPeggedToBase, rateProvider: IRateProvider(rateProvider)});
emit RateProviderUpdated(address(asset), isPeggedToBase, rateProvider);
}
/**
* @notice Reset the highwater mark to the current exchange rate.
* @dev Callable by OWNER_ROLE.
*/
function resetHighwaterMark() external virtual requiresAuth {
AccountantState storage state = accountantState;
if (state.exchangeRate > state.highwaterMark) {
revert AccountantWithRateProviders__ExchangeRateAboveHighwaterMark();
}
uint64 currentTime = uint64(block.timestamp);
uint256 currentTotalShares = vault.totalSupply();
_calculateFeesOwed(state, state.exchangeRate, state.exchangeRate, currentTotalShares, currentTime);
state.totalSharesLastUpdate = uint128(currentTotalShares);
state.highwaterMark = accountantState.exchangeRate;
state.lastUpdateTimestamp = currentTime;
emit HighwaterMarkReset();
}
// ========================================= UPDATE EXCHANGE RATE/FEES FUNCTIONS =========================================
/**
* @notice Updates this contract exchangeRate.
* @dev If new exchange rate is outside of accepted bounds, or if not enough time has passed, this
* will pause the contract, and this function will NOT calculate fees owed.
* @dev Callable by UPDATE_EXCHANGE_RATE_ROLE.
*/
function updateExchangeRate(uint96 newExchangeRate) external virtual requiresAuth {
(
bool shouldPause,
AccountantState storage state,
uint64 currentTime,
uint256 currentExchangeRate,
uint256 currentTotalShares
) = _beforeUpdateExchangeRate(newExchangeRate);
if (shouldPause) {
// Instead of reverting, pause the contract. This way the exchange rate updater is able to update the exchange rate
// to a better value, and pause it.
state.isPaused = true;
} else {
_calculateFeesOwed(state, newExchangeRate, currentExchangeRate, currentTotalShares, currentTime);
}
newExchangeRate = _setExchangeRate(newExchangeRate, state);
state.totalSharesLastUpdate = uint128(currentTotalShares);
state.lastUpdateTimestamp = currentTime;
emit ExchangeRateUpdated(uint96(currentExchangeRate), newExchangeRate, currentTime);
}
/**
* @notice Claim pending fees.
* @dev This function must be called by the BoringVault.
* @dev This function will lose precision if the exchange rate
* decimals is greater than the feeAsset's decimals.
*/
function claimFees(ERC20 feeAsset) external {
if (msg.sender != address(vault)) revert AccountantWithRateProviders__OnlyCallableByBoringVault();
AccountantState storage state = accountantState;
if (state.isPaused) revert AccountantWithRateProviders__Paused();
if (state.feesOwedInBase == 0) revert AccountantWithRateProviders__ZeroFeesOwed();
// Determine amount of fees owed in feeAsset.
uint256 feesOwedInFeeAsset;
RateProviderData memory data = rateProviderData[feeAsset];
if (address(feeAsset) == address(base)) {
feesOwedInFeeAsset = state.feesOwedInBase;
} else {
uint8 feeAssetDecimals = ERC20(feeAsset).decimals();
uint256 feesOwedInBaseUsingFeeAssetDecimals =
_changeDecimals(state.feesOwedInBase, decimals, feeAssetDecimals);
if (data.isPeggedToBase) {
feesOwedInFeeAsset = feesOwedInBaseUsingFeeAssetDecimals;
} else {
uint256 rate = data.rateProvider.getRate();
feesOwedInFeeAsset = feesOwedInBaseUsingFeeAssetDecimals.mulDivDown(10 ** feeAssetDecimals, rate);
}
}
// Zero out fees owed.
state.feesOwedInBase = 0;
// Transfer fee asset to payout address.
feeAsset.safeTransferFrom(msg.sender, state.payoutAddress, feesOwedInFeeAsset);
emit FeesClaimed(address(feeAsset), feesOwedInFeeAsset);
}
// ========================================= VIEW FUNCTIONS =========================================
/**
* @notice Get this BoringVault's current rate in the base.
*/
function getRate() public view returns (uint256 rate) {
rate = accountantState.exchangeRate;
}
/**
* @notice Get this BoringVault's current rate in the base.
* @dev Revert if paused.
*/
function getRateSafe() external view returns (uint256 rate) {
if (accountantState.isPaused) revert AccountantWithRateProviders__Paused();
rate = getRate();
}
/**
* @notice Get this BoringVault's current rate in the provided quote.
* @dev `quote` must have its RateProviderData set, else this will revert.
* @dev This function will lose precision if the exchange rate
* decimals is greater than the quote's decimals.
*/
function getRateInQuote(ERC20 quote) public view returns (uint256 rateInQuote) {
if (address(quote) == address(base)) {
rateInQuote = accountantState.exchangeRate;
} else {
RateProviderData memory data = rateProviderData[quote];
uint8 quoteDecimals = ERC20(quote).decimals();
uint256 exchangeRateInQuoteDecimals = _changeDecimals(accountantState.exchangeRate, decimals, quoteDecimals);
if (data.isPeggedToBase) {
rateInQuote = exchangeRateInQuoteDecimals;
} else {
uint256 quoteRate = data.rateProvider.getRate();
uint256 oneQuote = 10 ** quoteDecimals;
rateInQuote = oneQuote.mulDivDown(exchangeRateInQuoteDecimals, quoteRate);
}
}
}
/**
* @notice Get this BoringVault's current rate in the provided quote.
* @dev `quote` must have its RateProviderData set, else this will revert.
* @dev Revert if paused.
*/
function getRateInQuoteSafe(ERC20 quote) external view returns (uint256 rateInQuote) {
if (accountantState.isPaused) revert AccountantWithRateProviders__Paused();
rateInQuote = getRateInQuote(quote);
}
/**
* @notice Preview the result of an update to the exchange rate.
* @return updateWillPause Whether the update will pause the contract.
* @return newFeesOwedInBase The new fees owed in base.
* @return totalFeesOwedInBase The total fees owed in base.
*/
function previewUpdateExchangeRate(uint96 newExchangeRate)
external
view
virtual
returns (bool updateWillPause, uint256 newFeesOwedInBase, uint256 totalFeesOwedInBase)
{
(
bool shouldPause,
AccountantState storage state,
uint64 currentTime,
uint256 currentExchangeRate,
uint256 currentTotalShares
) = _beforeUpdateExchangeRate(newExchangeRate);
updateWillPause = shouldPause;
totalFeesOwedInBase = state.feesOwedInBase;
if (!shouldPause) {
(uint256 platformFeesOwedInBase, uint256 shareSupplyToUse) = _calculatePlatformFee(
state.totalSharesLastUpdate,
state.lastUpdateTimestamp,
state.platformFee,
newExchangeRate,
currentExchangeRate,
currentTotalShares,
currentTime
);
uint256 performanceFeesOwedInBase;
if (newExchangeRate > state.highwaterMark) {
(performanceFeesOwedInBase,) = _calculatePerformanceFee(
newExchangeRate, shareSupplyToUse, state.highwaterMark, state.performanceFee
);
}
newFeesOwedInBase = platformFeesOwedInBase + performanceFeesOwedInBase;
totalFeesOwedInBase += newFeesOwedInBase;
}
}
// ========================================= INTERNAL HELPER FUNCTIONS =========================================
/**
* @notice Used to change the decimals of precision used for an amount.
*/
function _changeDecimals(uint256 amount, uint8 fromDecimals, uint8 toDecimals) internal pure returns (uint256) {
if (fromDecimals == toDecimals) {
return amount;
} else if (fromDecimals < toDecimals) {
return amount * 10 ** (toDecimals - fromDecimals);
} else {
return amount / 10 ** (fromDecimals - toDecimals);
}
}
/**
* @notice Check if the new exchange rate is outside of the allowed bounds or if not enough time has passed.
*/
function _beforeUpdateExchangeRate(uint96 newExchangeRate)
internal
view
returns (
bool shouldPause,
AccountantState storage state,
uint64 currentTime,
uint256 currentExchangeRate,
uint256 currentTotalShares
)
{
state = accountantState;
if (state.isPaused) revert AccountantWithRateProviders__Paused();
currentTime = uint64(block.timestamp);
currentExchangeRate = state.exchangeRate;
currentTotalShares = vault.totalSupply();
shouldPause = currentTime < state.lastUpdateTimestamp + state.minimumUpdateDelayInSeconds
|| newExchangeRate > currentExchangeRate.mulDivDown(state.allowedExchangeRateChangeUpper, 1e4)
|| newExchangeRate < currentExchangeRate.mulDivDown(state.allowedExchangeRateChangeLower, 1e4);
}
/**
* @notice Set the exchange rate.
*/
function _setExchangeRate(uint96 newExchangeRate, AccountantState storage state)
internal
virtual
returns (uint96)
{
state.exchangeRate = newExchangeRate;
return newExchangeRate;
}
/**
* @notice Calculate platform fees.
*/
function _calculatePlatformFee(
uint128 totalSharesLastUpdate,
uint64 lastUpdateTimestamp,
uint16 platformFee,
uint96 newExchangeRate,
uint256 currentExchangeRate,
uint256 currentTotalShares,
uint64 currentTime
) internal view returns (uint256 platformFeesOwedInBase, uint256 shareSupplyToUse) {
shareSupplyToUse = currentTotalShares;
// Use the minimum between current total supply and total supply for last update.
if (totalSharesLastUpdate < shareSupplyToUse) {
shareSupplyToUse = totalSharesLastUpdate;
}
// Determine platform fees owned.
if (platformFee > 0) {
uint256 timeDelta = currentTime - lastUpdateTimestamp;
uint256 minimumAssets = newExchangeRate > currentExchangeRate
? shareSupplyToUse.mulDivDown(currentExchangeRate, ONE_SHARE)
: shareSupplyToUse.mulDivDown(newExchangeRate, ONE_SHARE);
uint256 platformFeesAnnual = minimumAssets.mulDivDown(platformFee, 1e4);
platformFeesOwedInBase = platformFeesAnnual.mulDivDown(timeDelta, 365 days);
}
}
/**
* @notice Calculate performance fees.
*/
function _calculatePerformanceFee(
uint96 newExchangeRate,
uint256 shareSupplyToUse,
uint96 datum,
uint16 performanceFee
) internal view returns (uint256 performanceFeesOwedInBase, uint256 yieldEarned) {
uint256 changeInExchangeRate = newExchangeRate - datum;
yieldEarned = changeInExchangeRate.mulDivDown(shareSupplyToUse, ONE_SHARE);
if (performanceFee > 0) {
performanceFeesOwedInBase = yieldEarned.mulDivDown(performanceFee, 1e4);
}
}
/**
* @notice Calculate fees owed in base.
* @dev This function will update the highwater mark if the new exchange rate is higher.
*/
function _calculateFeesOwed(
AccountantState storage state,
uint96 newExchangeRate,
uint256 currentExchangeRate,
uint256 currentTotalShares,
uint64 currentTime
) internal virtual {
// Only update fees if we are not paused.
// Update fee accounting.
(uint256 newFeesOwedInBase, uint256 shareSupplyToUse) = _calculatePlatformFee(
state.totalSharesLastUpdate,
state.lastUpdateTimestamp,
state.platformFee,
newExchangeRate,
currentExchangeRate,
currentTotalShares,
currentTime
);
// Account for performance fees.
if (newExchangeRate > state.highwaterMark) {
(uint256 performanceFeesOwedInBase,) =
_calculatePerformanceFee(newExchangeRate, shareSupplyToUse, state.highwaterMark, state.performanceFee);
// Add performance fees to fees owed.
newFeesOwedInBase += performanceFeesOwedInBase;
// Always update the highwater mark if the new exchange rate is higher.
// This way if we are not iniitiall taking performance fees, we can start taking them
// without back charging them on past performance.
state.highwaterMark = newExchangeRate;
}
state.feesOwedInBase += uint128(newFeesOwedInBase);
}
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;
/// @notice Arithmetic library with operations for fixed-point numbers.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/FixedPointMathLib.sol)
/// @author Inspired by USM (https://github.com/usmfum/USM/blob/master/contracts/WadMath.sol)
library FixedPointMathLib {
/*//////////////////////////////////////////////////////////////
SIMPLIFIED FIXED POINT OPERATIONS
//////////////////////////////////////////////////////////////*/
uint256 internal constant MAX_UINT256 = 2**256 - 1;
uint256 internal constant WAD = 1e18; // The scalar of ETH and most ERC20s.
function mulWadDown(uint256 x, uint256 y) internal pure returns (uint256) {
return mulDivDown(x, y, WAD); // Equivalent to (x * y) / WAD rounded down.
}
function mulWadUp(uint256 x, uint256 y) internal pure returns (uint256) {
return mulDivUp(x, y, WAD); // Equivalent to (x * y) / WAD rounded up.
}
function divWadDown(uint256 x, uint256 y) internal pure returns (uint256) {
return mulDivDown(x, WAD, y); // Equivalent to (x * WAD) / y rounded down.
}
function divWadUp(uint256 x, uint256 y) internal pure returns (uint256) {
return mulDivUp(x, WAD, y); // Equivalent to (x * WAD) / y rounded up.
}
/*//////////////////////////////////////////////////////////////
LOW LEVEL FIXED POINT OPERATIONS
//////////////////////////////////////////////////////////////*/
function mulDivDown(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 z) {
/// @solidity memory-safe-assembly
assembly {
// Equivalent to require(denominator != 0 && (y == 0 || x <= type(uint256).max / y))
if iszero(mul(denominator, iszero(mul(y, gt(x, div(MAX_UINT256, y)))))) {
revert(0, 0)
}
// Divide x * y by the denominator.
z := div(mul(x, y), denominator)
}
}
function mulDivUp(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 z) {
/// @solidity memory-safe-assembly
assembly {
// Equivalent to require(denominator != 0 && (y == 0 || x <= type(uint256).max / y))
if iszero(mul(denominator, iszero(mul(y, gt(x, div(MAX_UINT256, y)))))) {
revert(0, 0)
}
// If x * y modulo the denominator is strictly greater than 0,
// 1 is added to round up the division of x * y by the denominator.
z := add(gt(mod(mul(x, y), denominator), 0), div(mul(x, y), denominator))
}
}
function rpow(
uint256 x,
uint256 n,
uint256 scalar
) internal pure returns (uint256 z) {
/// @solidity memory-safe-assembly
assembly {
switch x
case 0 {
switch n
case 0 {
// 0 ** 0 = 1
z := scalar
}
default {
// 0 ** n = 0
z := 0
}
}
default {
switch mod(n, 2)
case 0 {
// If n is even, store scalar in z for now.
z := scalar
}
default {
// If n is odd, store x in z for now.
z := x
}
// Shifting right by 1 is like dividing by 2.
let half := shr(1, scalar)
for {
// Shift n right by 1 before looping to halve it.
n := shr(1, n)
} n {
// Shift n right by 1 each iteration to halve it.
n := shr(1, n)
} {
// Revert immediately if x ** 2 would overflow.
// Equivalent to iszero(eq(div(xx, x), x)) here.
if shr(128, x) {
revert(0, 0)
}
// Store x squared.
let xx := mul(x, x)
// Round to the nearest number.
let xxRound := add(xx, half)
// Revert if xx + half overflowed.
if lt(xxRound, xx) {
revert(0, 0)
}
// Set x to scaled xxRound.
x := div(xxRound, scalar)
// If n is even:
if mod(n, 2) {
// Compute z * x.
let zx := mul(z, x)
// If z * x overflowed:
if iszero(eq(div(zx, x), z)) {
// Revert if x is non-zero.
if iszero(iszero(x)) {
revert(0, 0)
}
}
// Round to the nearest number.
let zxRound := add(zx, half)
// Revert if zx + half overflowed.
if lt(zxRound, zx) {
revert(0, 0)
}
// Return properly scaled zxRound.
z := div(zxRound, scalar)
}
}
}
}
}
/*//////////////////////////////////////////////////////////////
GENERAL NUMBER UTILITIES
//////////////////////////////////////////////////////////////*/
function sqrt(uint256 x) internal pure returns (uint256 z) {
/// @solidity memory-safe-assembly
assembly {
let y := x // We start y at x, which will help us make our initial estimate.
z := 181 // The "correct" value is 1, but this saves a multiplication later.
// This segment is to get a reasonable initial estimate for the Babylonian method. With a bad
// start, the correct # of bits increases ~linearly each iteration instead of ~quadratically.
// We check y >= 2^(k + 8) but shift right by k bits
// each branch to ensure that if x >= 256, then y >= 256.
if iszero(lt(y, 0x10000000000000000000000000000000000)) {
y := shr(128, y)
z := shl(64, z)
}
if iszero(lt(y, 0x1000000000000000000)) {
y := shr(64, y)
z := shl(32, z)
}
if iszero(lt(y, 0x10000000000)) {
y := shr(32, y)
z := shl(16, z)
}
if iszero(lt(y, 0x1000000)) {
y := shr(16, y)
z := shl(8, z)
}
// Goal was to get z*z*y within a small factor of x. More iterations could
// get y in a tighter range. Currently, we will have y in [256, 256*2^16).
// We ensured y >= 256 so that the relative difference between y and y+1 is small.
// That's not possible if x < 256 but we can just verify those cases exhaustively.
// Now, z*z*y <= x < z*z*(y+1), and y <= 2^(16+8), and either y >= 256, or x < 256.
// Correctness can be checked exhaustively for x < 256, so we assume y >= 256.
// Then z*sqrt(y) is within sqrt(257)/sqrt(256) of sqrt(x), or about 20bps.
// For s in the range [1/256, 256], the estimate f(s) = (181/1024) * (s+1) is in the range
// (1/2.84 * sqrt(s), 2.84 * sqrt(s)), with largest error when s = 1 and when s = 256 or 1/256.
// Since y is in [256, 256*2^16), let a = y/65536, so that a is in [1/256, 256). Then we can estimate
// sqrt(y) using sqrt(65536) * 181/1024 * (a + 1) = 181/4 * (y + 65536)/65536 = 181 * (y + 65536)/2^18.
// There is no overflow risk here since y < 2^136 after the first branch above.
z := shr(18, mul(z, add(y, 65536))) // A mul() is saved from starting z at 181.
// Given the worst case multiplicative error of 2.84 above, 7 iterations should be enough.
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
// If x+1 is a perfect square, the Babylonian method cycles between
// floor(sqrt(x)) and ceil(sqrt(x)). This statement ensures we return floor.
// See: https://en.wikipedia.org/wiki/Integer_square_root#Using_only_integer_division
// Since the ceil is rare, we save gas on the assignment and repeat division in the rare case.
// If you don't care whether the floor or ceil square root is returned, you can remove this statement.
z := sub(z, lt(div(x, z), z))
}
}
function unsafeMod(uint256 x, uint256 y) internal pure returns (uint256 z) {
/// @solidity memory-safe-assembly
assembly {
// Mod x by y. Note this will return
// 0 instead of reverting if y is zero.
z := mod(x, y)
}
}
function unsafeDiv(uint256 x, uint256 y) internal pure returns (uint256 r) {
/// @solidity memory-safe-assembly
assembly {
// Divide x by y. Note this will return
// 0 instead of reverting if y is zero.
r := div(x, y)
}
}
function unsafeDivUp(uint256 x, uint256 y) internal pure returns (uint256 z) {
/// @solidity memory-safe-assembly
assembly {
// Add 1 to x * y if x % y > 0. Note this will
// return 0 instead of reverting if y is zero.
z := add(gt(mod(x, y), 0), div(x, y))
}
}
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;
import {ERC20} from "../tokens/ERC20.sol";
/// @notice Safe ETH and ERC20 transfer library that gracefully handles missing return values.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/SafeTransferLib.sol)
/// @dev Use with caution! Some functions in this library knowingly create dirty bits at the destination of the free memory pointer.
/// @dev Note that none of the functions in this library check that a token has code at all! That responsibility is delegated to the caller.
library SafeTransferLib {
/*//////////////////////////////////////////////////////////////
ETH OPERATIONS
//////////////////////////////////////////////////////////////*/
function safeTransferETH(address to, uint256 amount) internal {
bool success;
/// @solidity memory-safe-assembly
assembly {
// Transfer the ETH and store if it succeeded or not.
success := call(gas(), to, amount, 0, 0, 0, 0)
}
require(success, "ETH_TRANSFER_FAILED");
}
/*//////////////////////////////////////////////////////////////
ERC20 OPERATIONS
//////////////////////////////////////////////////////////////*/
function safeTransferFrom(
ERC20 token,
address from,
address to,
uint256 amount
) internal {
bool success;
/// @solidity memory-safe-assembly
assembly {
// Get a pointer to some free memory.
let freeMemoryPointer := mload(0x40)
// Write the abi-encoded calldata into memory, beginning with the function selector.
mstore(freeMemoryPointer, 0x23b872dd00000000000000000000000000000000000000000000000000000000)
mstore(add(freeMemoryPointer, 4), and(from, 0xffffffffffffffffffffffffffffffffffffffff)) // Append and mask the "from" argument.
mstore(add(freeMemoryPointer, 36), and(to, 0xffffffffffffffffffffffffffffffffffffffff)) // Append and mask the "to" argument.
mstore(add(freeMemoryPointer, 68), amount) // Append the "amount" argument. Masking not required as it's a full 32 byte type.
success := and(
// Set success to whether the call reverted, if not we check it either
// returned exactly 1 (can't just be non-zero data), or had no return data.
or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
// We use 100 because the length of our calldata totals up like so: 4 + 32 * 3.
// We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
// Counterintuitively, this call must be positioned second to the or() call in the
// surrounding and() call or else returndatasize() will be zero during the computation.
call(gas(), token, 0, freeMemoryPointer, 100, 0, 32)
)
}
require(success, "TRANSFER_FROM_FAILED");
}
function safeTransfer(
ERC20 token,
address to,
uint256 amount
) internal {
bool success;
/// @solidity memory-safe-assembly
assembly {
// Get a pointer to some free memory.
let freeMemoryPointer := mload(0x40)
// Write the abi-encoded calldata into memory, beginning with the function selector.
mstore(freeMemoryPointer, 0xa9059cbb00000000000000000000000000000000000000000000000000000000)
mstore(add(freeMemoryPointer, 4), and(to, 0xffffffffffffffffffffffffffffffffffffffff)) // Append and mask the "to" argument.
mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument. Masking not required as it's a full 32 byte type.
success := and(
// Set success to whether the call reverted, if not we check it either
// returned exactly 1 (can't just be non-zero data), or had no return data.
or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
// We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
// We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
// Counterintuitively, this call must be positioned second to the or() call in the
// surrounding and() call or else returndatasize() will be zero during the computation.
call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
)
}
require(success, "TRANSFER_FAILED");
}
function safeApprove(
ERC20 token,
address to,
uint256 amount
) internal {
bool success;
/// @solidity memory-safe-assembly
assembly {
// Get a pointer to some free memory.
let freeMemoryPointer := mload(0x40)
// Write the abi-encoded calldata into memory, beginning with the function selector.
mstore(freeMemoryPointer, 0x095ea7b300000000000000000000000000000000000000000000000000000000)
mstore(add(freeMemoryPointer, 4), and(to, 0xffffffffffffffffffffffffffffffffffffffff)) // Append and mask the "to" argument.
mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument. Masking not required as it's a full 32 byte type.
success := and(
// Set success to whether the call reverted, if not we check it either
// returned exactly 1 (can't just be non-zero data), or had no return data.
or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
// We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
// We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
// Counterintuitively, this call must be positioned second to the or() call in the
// surrounding and() call or else returndatasize() will be zero during the computation.
call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
)
}
require(success, "APPROVE_FAILED");
}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.21;
interface BeforeTransferHook {
function beforeTransfer(address from, address to, address operator) external view;
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;
/// @notice Provides a flexible and updatable auth pattern which is completely separate from application logic.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/auth/Auth.sol)
/// @author Modified from Dappsys (https://github.com/dapphub/ds-auth/blob/master/src/auth.sol)
abstract contract Auth {
event OwnershipTransferred(address indexed user, address indexed newOwner);
event AuthorityUpdated(address indexed user, Authority indexed newAuthority);
address public owner;
Authority public authority;
constructor(address _owner, Authority _authority) {
owner = _owner;
authority = _authority;
emit OwnershipTransferred(msg.sender, _owner);
emit AuthorityUpdated(msg.sender, _authority);
}
modifier requiresAuth() virtual {
require(isAuthorized(msg.sender, msg.sig), "UNAUTHORIZED");
_;
}
function isAuthorized(address user, bytes4 functionSig) internal view virtual returns (bool) {
Authority auth = authority; // Memoizing authority saves us a warm SLOAD, around 100 gas.
// Checking if the caller is the owner only after calling the authority saves gas in most cases, but be
// aware that this makes protected functions uncallable even to the owner if the authority is out of order.
return (address(auth) != address(0) && auth.canCall(user, address(this), functionSig)) || user == owner;
}
function setAuthority(Authority newAuthority) public virtual {
// We check if the caller is the owner first because we want to ensure they can
// always swap out the authority even if it's reverting or using up a lot of gas.
require(msg.sender == owner || authority.canCall(msg.sender, address(this), msg.sig));
authority = newAuthority;
emit AuthorityUpdated(msg.sender, newAuthority);
}
function transferOwnership(address newOwner) public virtual requiresAuth {
owner = newOwner;
emit OwnershipTransferred(msg.sender, newOwner);
}
}
/// @notice A generic interface for a contract which provides authorization data to an Auth instance.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/auth/Auth.sol)
/// @author Modified from Dappsys (https://github.com/dapphub/ds-auth/blob/master/src/auth.sol)
interface Authority {
function canCall(
address user,
address target,
bytes4 functionSig
) external view returns (bool);
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;
/// @notice Gas optimized reentrancy protection for smart contracts.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/ReentrancyGuard.sol)
/// @author Modified from OpenZeppelin (https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/security/ReentrancyGuard.sol)
abstract contract ReentrancyGuard {
uint256 private locked = 1;
modifier nonReentrant() virtual {
require(locked == 1, "REENTRANCY");
locked = 2;
_;
locked = 1;
}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.21;
interface IPausable {
function pause() external;
function unpause() external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)
pragma solidity ^0.8.20;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev The ETH balance of the account is not enough to perform the operation.
*/
error AddressInsufficientBalance(address account);
/**
* @dev There's no code at `target` (it is not a contract).
*/
error AddressEmptyCode(address target);
/**
* @dev A call to an address target failed. The target may have reverted.
*/
error FailedInnerCall();
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
if (address(this).balance < amount) {
revert AddressInsufficientBalance(address(this));
}
(bool success, ) = recipient.call{value: amount}("");
if (!success) {
revert FailedInnerCall();
}
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason or custom error, it is bubbled
* up by this function (like regular Solidity function calls). However, if
* the call reverted with no returned reason, this function reverts with a
* {FailedInnerCall} error.
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
if (address(this).balance < value) {
revert AddressInsufficientBalance(address(this));
}
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
* was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
* unsuccessful call.
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata
) internal view returns (bytes memory) {
if (!success) {
_revert(returndata);
} else {
// only check if target is a contract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
if (returndata.length == 0 && target.code.length == 0) {
revert AddressEmptyCode(target);
}
return returndata;
}
}
/**
* @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
* revert reason or with a default {FailedInnerCall} error.
*/
function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
if (!success) {
_revert(returndata);
} else {
return returndata;
}
}
/**
* @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
*/
function _revert(bytes memory returndata) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert FailedInnerCall();
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/utils/ERC721Holder.sol)
pragma solidity ^0.8.20;
import {IERC721Receiver} from "../IERC721Receiver.sol";
/**
* @dev Implementation of the {IERC721Receiver} interface.
*
* Accepts all token transfers.
* Make sure the contract is able to use its token with {IERC721-safeTransferFrom}, {IERC721-approve} or
* {IERC721-setApprovalForAll}.
*/
abstract contract ERC721Holder is IERC721Receiver {
/**
* @dev See {IERC721Receiver-onERC721Received}.
*
* Always returns `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(address, address, uint256, bytes memory) public virtual returns (bytes4) {
return this.onERC721Received.selector;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC1155/utils/ERC1155Holder.sol)
pragma solidity ^0.8.20;
import {IERC165, ERC165} from "../../../utils/introspection/ERC165.sol";
import {IERC1155Receiver} from "../IERC1155Receiver.sol";
/**
* @dev Simple implementation of `IERC1155Receiver` that will allow a contract to hold ERC1155 tokens.
*
* IMPORTANT: When inheriting this contract, you must include a way to use the received tokens, otherwise they will be
* stuck.
*/
abstract contract ERC1155Holder is ERC165, IERC1155Receiver {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IERC1155Receiver).interfaceId || super.supportsInterface(interfaceId);
}
function onERC1155Received(
address,
address,
uint256,
uint256,
bytes memory
) public virtual override returns (bytes4) {
return this.onERC1155Received.selector;
}
function onERC1155BatchReceived(
address,
address,
uint256[] memory,
uint256[] memory,
bytes memory
) public virtual override returns (bytes4) {
return this.onERC1155BatchReceived.selector;
}
}
// SPDX-License-Identifier: UNLICENSED
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.8.0;
interface IRateProvider {
function getRate() external view returns (uint256);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.20;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be
* reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)
pragma solidity ^0.8.20;
import {IERC165} from "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC1155/IERC1155Receiver.sol)
pragma solidity ^0.8.20;
import {IERC165} from "../../utils/introspection/IERC165.sol";
/**
* @dev Interface that must be implemented by smart contracts in order to receive
* ERC-1155 token transfers.
*/
interface IERC1155Receiver is IERC165 {
/**
* @dev Handles the receipt of a single ERC1155 token type. This function is
* called at the end of a `safeTransferFrom` after the balance has been updated.
*
* NOTE: To accept the transfer, this must return
* `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
* (i.e. 0xf23a6e61, or its own function selector).
*
* @param operator The address which initiated the transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param id The ID of the token being transferred
* @param value The amount of tokens being transferred
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
) external returns (bytes4);
/**
* @dev Handles the receipt of a multiple ERC1155 token types. This function
* is called at the end of a `safeBatchTransferFrom` after the balances have
* been updated.
*
* NOTE: To accept the transfer(s), this must return
* `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
* (i.e. 0xbc197c81, or its own function selector).
*
* @param operator The address which initiated the batch transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param ids An array containing ids of each token being transferred (order and length must match values array)
* @param values An array containing amounts of each token being transferred (order and length must match ids array)
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)
pragma solidity ^0.8.20;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}