Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Is this a proxy?
• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import {IAccessManager} from "@openzeppelin/contracts/access/manager/IAccessManager.sol";
import {IAccessManaged} from "@openzeppelin/contracts/access/manager/IAccessManaged.sol";
import {Address} from "@openzeppelin/contracts/utils/Address.sol";
import {Context} from "@openzeppelin/contracts/utils/Context.sol";
import {Multicall} from "@openzeppelin/contracts/utils/Multicall.sol";
import {Math} from "@openzeppelin/contracts/utils/math/Math.sol";
import {Time} from "@openzeppelin/contracts/utils/types/Time.sol";
import {IExtendedAccessManager, IAuthorizer} from "../interfaces/IExtendedAccessManager.sol";

/**
 * @dev AccessManager is a central contract to store the permissions of a system.
 *
 * A smart contract under the control of an AccessManager instance is known as a target, and will inherit from the
 * {AccessManaged} contract, be connected to this contract as its manager and implement the {AccessManaged-restricted}
 * modifier on a set of functions selected to be permissioned. Note that any function without this setup won't be
 * effectively restricted.
 *
 * The restriction rules for such functions are defined in terms of "roles" identified by an `uint64` and scoped
 * by target (`address`) and function selectors (`bytes4`). These roles are stored in this contract and can be
 * configured by admins (`ADMIN_ROLE` members) after a delay (see {getTargetAdminDelay}).
 *
 * For each target contract, admins can configure the following without any delay:
 *
 * * The target's {AccessManaged-authority} via {updateAuthority}.
 * * Close or open a target via {setTargetClosed} keeping the permissions intact.
 * * The roles that are allowed (or disallowed) to call a given function (identified by its selector) through {setTargetFunctionRole}.
 *
 * By default every address is member of the `PUBLIC_ROLE` and every target function is restricted to the `ADMIN_ROLE` until configured otherwise.
 * Additionally, each role has the following configuration options restricted to this manager's admins:
 *
 * * A role's admin role via {setRoleAdmin} who can grant or revoke roles.
 * * A role's guardian role via {setRoleGuardian} who's allowed to cancel operations.
 * * A delay in which a role takes effect after being granted through {setGrantDelay}.
 * * A delay of any target's admin action via {setTargetAdminDelay}.
 * * A role label for discoverability purposes with {labelRole}.
 *
 * Any account can be added and removed into any number of these roles by using the {grantRole} and {revokeRole} functions
 * restricted to each role's admin (see {getRoleAdmin}).
 *
 * Since all the permissions of the managed system can be modified by the admins of this instance, it is expected that
 * they will be highly secured (e.g., a multisig or a well-configured DAO).
 *
 * NOTE: This contract implements a form of the {IAuthority} interface, but {canCall} has additional return data so it
 * doesn't inherit `IAuthority`. It is however compatible with the `IAuthority` interface since the first 32 bytes of
 * the return data are a boolean as expected by that interface.
 *
 * NOTE: Systems that implement other access control mechanisms (for example using {Ownable}) can be paired with an
 * {AccessManager} by transferring permissions (ownership in the case of {Ownable}) directly to the {AccessManager}.
 * Users will be able to interact with these contracts through the {execute} function, following the access rules
 * registered in the {AccessManager}. Keep in mind that in that context, the msg.sender seen by restricted functions
 * will be {AccessManager} itself.
 *
 * WARNING: When granting permissions over an {Ownable} or {AccessControl} contract to an {AccessManager}, be very
 * mindful of the danger associated with functions such as {{Ownable-renounceOwnership}} or
 * {{AccessControl-renounceRole}}.
 */
contract ExtendedAccessManager is Context, Multicall, IAccessManager, IExtendedAccessManager {
    using Time for *;

    // Structure that stores the details for a target contract.
    struct TargetConfig {
        mapping(bytes32 actionId => uint64 roleId) allowedRoles;
        Time.Delay adminDelay;
        bool closed;
    }

    // Structure that stores the details for a role/account pair. This structures fit into a single slot.
    struct Access {
        // Timepoint at which the user gets the permission.
        // If this is either 0 or in the future, then the role permission is not available.
        uint48 since;
        // Delay for execution. Only applies to restricted() / execute() calls.
        Time.Delay delay;
    }

    // Structure that stores the details of a role.
    struct Role {
        // Members of the role.
        mapping(address user => Access access) members;
        // Admin who can grant or revoke permissions.
        uint64 admin;
        // Guardian who can cancel operations targeting functions that need this role.
        uint64 guardian;
        // Delay in which the role takes effect after being granted.
        Time.Delay grantDelay;
    }

    // Structure that stores the details for a scheduled operation. This structure fits into a single slot.
    struct Schedule {
        // Moment at which the operation can be executed.
        uint48 timepoint;
        // Operation nonce to allow third-party contracts to identify the operation.
        uint32 nonce;
    }

    uint64 public constant ADMIN_ROLE = type(uint64).min; // 0
    uint64 public constant PUBLIC_ROLE = type(uint64).max; // 2**64-1

    mapping(address target => TargetConfig mode) private _targets;
    mapping(uint64 roleId => Role) private _roles;
    mapping(bytes32 operationId => Schedule) private _schedules;

    // Used to identify operations that are currently being executed via {execute}.
    // This should be transient storage when supported by the EVM.
    bytes32 private _executionId;

    /**
     * @dev Check that the caller is authorized to perform the operation, following the restrictions encoded in
     * {_getAdminRestrictions}.
     */
    modifier onlyAuthorized() {
        _checkAuthorized();
        _;
    }

    constructor(address initialAdmin) {
        if (initialAdmin == address(0)) {
            revert AccessManagerInvalidInitialAdmin(address(0));
        }

        // admin is active immediately and without any execution delay.
        _grantRole(ADMIN_ROLE, initialAdmin, 0, 0);
    }

    // =================================================== GETTERS ====================================================
    /// @inheritdoc IAccessManager
    function canCall(
        address caller,
        address target,
        bytes4 selector
    ) public view virtual returns (bool immediate, uint32 delay) {
        if (isTargetClosed(target)) {
            return (false, 0);
        } else if (caller == address(this)) {
            // Caller is AccessManager, this means the call was sent through {execute} and it already checked
            // permissions. We verify that the call "identifier", which is set during {execute}, is correct.
            return (_isExecuting(target, selector), 0);
        } else {
            uint64 roleId = getTargetFunctionRole(target, selector);
            (bool isMember, uint32 currentDelay) = hasRole(roleId, caller);
            return isMember ? (currentDelay == 0, currentDelay) : (false, 0);
        }
    }

    /// @inheritdoc IAccessManager
    function expiration() public view virtual returns (uint32) {
        return 1 weeks;
    }

    /// @inheritdoc IAccessManager
    function minSetback() public view virtual returns (uint32) {
        return 5 days;
    }

    /// @inheritdoc IAccessManager
    function isTargetClosed(address target) public view virtual returns (bool) {
        return _targets[target].closed;
    }

    /// @inheritdoc IAccessManager
    function getTargetFunctionRole(address target, bytes4 selector) public view virtual returns (uint64) {
        return _getTargetActionRole(target, _getActionId(target, selector));
    }

    function getTargetActionRole(address target, bytes32 actionId) external view override virtual returns (uint64) {
        return _getTargetActionRole(target, actionId);
    }


    /// @inheritdoc IAccessManager
    function getTargetAdminDelay(address target) public view virtual returns (uint32) {
        return _targets[target].adminDelay.get();
    }

    /// @inheritdoc IAccessManager
    function getRoleAdmin(uint64 roleId) public view virtual returns (uint64) {
        return _roles[roleId].admin;
    }

    /// @inheritdoc IAccessManager
    function getRoleGuardian(uint64 roleId) public view virtual returns (uint64) {
        return _roles[roleId].guardian;
    }

    /// @inheritdoc IAccessManager
    function getRoleGrantDelay(uint64 roleId) public view virtual returns (uint32) {
        return _roles[roleId].grantDelay.get();
    }

    /// @inheritdoc IAccessManager
    function getAccess(
        uint64 roleId,
        address account
    ) public view virtual returns (uint48 since, uint32 currentDelay, uint32 pendingDelay, uint48 effect) {
        Access storage access = _roles[roleId].members[account];

        since = access.since;
        (currentDelay, pendingDelay, effect) = access.delay.getFull();

        return (since, currentDelay, pendingDelay, effect);
    }

    /// @inheritdoc IAccessManager
    function hasRole(
        uint64 roleId,
        address account
    ) public view virtual returns (bool isMember, uint32 executionDelay) {
        if (roleId == PUBLIC_ROLE) {
            return (true, 0);
        } else {
            (uint48 hasRoleSince, uint32 currentDelay, , ) = getAccess(roleId, account);
            return (hasRoleSince != 0 && hasRoleSince <= Time.timestamp(), currentDelay);
        }
    }

    /// @inheritdoc IAuthorizer
    function canPerform(
        bytes32 actionId,
        address account,
        address where
    ) external view returns (bool) {
        if (isTargetClosed(where)) {
            return false;
        } else if (account == address(this) && actionId == _executionId) {
            // Caller is AccessManager and actionId matches executionId, this means the call was sent through {execute}
            // and it already checked permissions
            return true;
        } else {
            uint64 roleId = _getTargetActionRole(where, actionId);
            (bool isMember, uint32 currentDelay) = hasRole(roleId, account);
            return isMember ? currentDelay == 0 : false;
        }
    }

    function _getTargetActionRole(address target, bytes32 actionId) internal view virtual returns (uint64) {
        return _targets[target].allowedRoles[actionId];
    }

    // =============================================== ROLE MANAGEMENT ===============================================
    /// @inheritdoc IAccessManager
    function labelRole(uint64 roleId, string calldata label) public virtual onlyAuthorized {
        if (roleId == ADMIN_ROLE || roleId == PUBLIC_ROLE) {
            revert AccessManagerLockedRole(roleId);
        }
        emit RoleLabel(roleId, label);
    }

    /// @inheritdoc IAccessManager
    function grantRole(uint64 roleId, address account, uint32 executionDelay) public virtual onlyAuthorized {
        _grantRole(roleId, account, getRoleGrantDelay(roleId), executionDelay);
    }

    /// @inheritdoc IAccessManager
    function revokeRole(uint64 roleId, address account) public virtual onlyAuthorized {
        _revokeRole(roleId, account);
    }

    /// @inheritdoc IAccessManager
    function renounceRole(uint64 roleId, address callerConfirmation) public virtual {
        if (callerConfirmation != _msgSender()) {
            revert AccessManagerBadConfirmation();
        }
        _revokeRole(roleId, callerConfirmation);
    }

    /// @inheritdoc IAccessManager
    function setRoleAdmin(uint64 roleId, uint64 admin) public virtual onlyAuthorized {
        _setRoleAdmin(roleId, admin);
    }

    /// @inheritdoc IAccessManager
    function setRoleGuardian(uint64 roleId, uint64 guardian) public virtual onlyAuthorized {
        _setRoleGuardian(roleId, guardian);
    }

    /// @inheritdoc IAccessManager
    function setGrantDelay(uint64 roleId, uint32 newDelay) public virtual onlyAuthorized {
        _setGrantDelay(roleId, newDelay);
    }

    /**
     * @dev Internal version of {grantRole} without access control. Returns true if the role was newly granted.
     *
     * Emits a {RoleGranted} event.
     */
    function _grantRole(
        uint64 roleId,
        address account,
        uint32 grantDelay,
        uint32 executionDelay
    ) internal virtual returns (bool) {
        if (roleId == PUBLIC_ROLE) {
            revert AccessManagerLockedRole(roleId);
        }

        bool newMember = _roles[roleId].members[account].since == 0;
        uint48 since;

        if (newMember) {
            since = Time.timestamp() + grantDelay;
            _roles[roleId].members[account] = Access({since: since, delay: executionDelay.toDelay()});
        } else {
            // No setback here. Value can be reset by doing revoke + grant, effectively allowing the admin to perform
            // any change to the execution delay within the duration of the role admin delay.
            (_roles[roleId].members[account].delay, since) = _roles[roleId].members[account].delay.withUpdate(
                executionDelay,
                0
            );
        }

        emit RoleGranted(roleId, account, executionDelay, since, newMember);
        return newMember;
    }

    /**
     * @dev Internal version of {revokeRole} without access control. This logic is also used by {renounceRole}.
     * Returns true if the role was previously granted.
     *
     * Emits a {RoleRevoked} event if the account had the role.
     */
    function _revokeRole(uint64 roleId, address account) internal virtual returns (bool) {
        if (roleId == PUBLIC_ROLE) {
            revert AccessManagerLockedRole(roleId);
        }

        if (_roles[roleId].members[account].since == 0) {
            return false;
        }

        delete _roles[roleId].members[account];

        emit RoleRevoked(roleId, account);
        return true;
    }

    /**
     * @dev Internal version of {setRoleAdmin} without access control.
     *
     * Emits a {RoleAdminChanged} event.
     *
     * NOTE: Setting the admin role as the `PUBLIC_ROLE` is allowed, but it will effectively allow
     * anyone to set grant or revoke such role.
     */
    function _setRoleAdmin(uint64 roleId, uint64 admin) internal virtual {
        if (roleId == ADMIN_ROLE || roleId == PUBLIC_ROLE) {
            revert AccessManagerLockedRole(roleId);
        }

        _roles[roleId].admin = admin;

        emit RoleAdminChanged(roleId, admin);
    }

    /**
     * @dev Internal version of {setRoleGuardian} without access control.
     *
     * Emits a {RoleGuardianChanged} event.
     *
     * NOTE: Setting the guardian role as the `PUBLIC_ROLE` is allowed, but it will effectively allow
     * anyone to cancel any scheduled operation for such role.
     */
    function _setRoleGuardian(uint64 roleId, uint64 guardian) internal virtual {
        if (roleId == ADMIN_ROLE || roleId == PUBLIC_ROLE) {
            revert AccessManagerLockedRole(roleId);
        }

        _roles[roleId].guardian = guardian;

        emit RoleGuardianChanged(roleId, guardian);
    }

    /**
     * @dev Internal version of {setGrantDelay} without access control.
     *
     * Emits a {RoleGrantDelayChanged} event.
     */
    function _setGrantDelay(uint64 roleId, uint32 newDelay) internal virtual {
        if (roleId == PUBLIC_ROLE) {
            revert AccessManagerLockedRole(roleId);
        }

        uint48 effect;
        (_roles[roleId].grantDelay, effect) = _roles[roleId].grantDelay.withUpdate(newDelay, minSetback());

        emit RoleGrantDelayChanged(roleId, newDelay, effect);
    }

    // ============================================= FUNCTION MANAGEMENT ==============================================
    /// @inheritdoc IAccessManager
    function setTargetFunctionRole(
        address target,
        bytes4[] calldata selectors,
        uint64 roleId
    ) public virtual onlyAuthorized {
        for (uint256 i = 0; i < selectors.length; ++i) {
            _setTargetFunctionRole(target, selectors[i], roleId);
        }
    }

    function setTargetActionRole(
        address target,
        bytes32 actionIdDisambiguator,
        bytes4[] calldata selectors,
        uint64 roleId
    ) external virtual onlyAuthorized {
        for (uint256 i = 0; i < selectors.length; ++i) {
            _setTargetActionRole(target, _getActionId(actionIdDisambiguator, selectors[i]), roleId);
        }
    }

    /**
     * @dev Internal version of {setTargetFunctionRole} without access control.
     *
     * Emits a {TargetFunctionRoleUpdated} event.
     */
    function _setTargetFunctionRole(address target, bytes4 selector, uint64 roleId) internal virtual {
        bytes32 actionId = _getActionId(bytes32(uint(uint160(target))), selector);
        _setTargetActionRole(target, actionId, roleId);
        emit TargetFunctionRoleUpdated(target, selector, roleId);
    }

    /**
     * @dev Internal version of {setTargetActionRole} without access control.
     *
     * Emits a {TargetActionRoleUpdated} event.
     */
    function _setTargetActionRole(address target, bytes32 actionId, uint64 roleId) internal virtual {
        _targets[target].allowedRoles[actionId] = roleId;
        emit TargetActionRoleUpdated(target, actionId, roleId);
    }

    /// @inheritdoc IAccessManager
    function setTargetAdminDelay(address target, uint32 newDelay) public virtual onlyAuthorized {
        _setTargetAdminDelay(target, newDelay);
    }

    /**
     * @dev Internal version of {setTargetAdminDelay} without access control.
     *
     * Emits a {TargetAdminDelayUpdated} event.
     */
    function _setTargetAdminDelay(address target, uint32 newDelay) internal virtual {
        uint48 effect;
        (_targets[target].adminDelay, effect) = _targets[target].adminDelay.withUpdate(newDelay, minSetback());

        emit TargetAdminDelayUpdated(target, newDelay, effect);
    }

    // =============================================== MODE MANAGEMENT ================================================
    /// @inheritdoc IAccessManager
    function setTargetClosed(address target, bool closed) public virtual onlyAuthorized {
        _setTargetClosed(target, closed);
    }

    /**
     * @dev Set the closed flag for a contract. This is an internal setter with no access restrictions.
     *
     * Emits a {TargetClosed} event.
     */
    function _setTargetClosed(address target, bool closed) internal virtual {
        if (target == address(this)) {
            revert AccessManagerLockedAccount(target);
        }
        _targets[target].closed = closed;
        emit TargetClosed(target, closed);
    }

    // ============================================== DELAYED OPERATIONS ==============================================
    /// @inheritdoc IAccessManager
    function getSchedule(bytes32 id) public view virtual returns (uint48) {
        uint48 timepoint = _schedules[id].timepoint;
        return _isExpired(timepoint) ? 0 : timepoint;
    }

    /// @inheritdoc IAccessManager
    function getNonce(bytes32 id) public view virtual returns (uint32) {
        return _schedules[id].nonce;
    }

    /// @inheritdoc IAccessManager
    function schedule(
        address target,
        bytes calldata data,
        uint48 when
    ) public virtual returns (bytes32 operationId, uint32 nonce) {
        address caller = _msgSender();

        // Fetch restrictions that apply to the caller on the targeted function
        (, uint32 setback) = _canCallExtended(caller, target, data);

        uint48 minWhen = Time.timestamp() + setback;

        // if call with delay is not authorized, or if requested timing is too soon
        if (setback == 0 || (when > 0 && when < minWhen)) {
            revert AccessManagerUnauthorizedCall(caller, target, _checkSelector(data));
        }

        // Reuse variable due to stack too deep
        when = uint48(Math.max(when, minWhen)); // cast is safe: both inputs are uint48

        // If caller is authorised, schedule operation
        operationId = hashOperation(caller, target, data);

        _checkNotScheduled(operationId);

        unchecked {
            // It's not feasible to overflow the nonce in less than 1000 years
            nonce = _schedules[operationId].nonce + 1;
        }
        _schedules[operationId].timepoint = when;
        _schedules[operationId].nonce = nonce;
        emit OperationScheduled(operationId, nonce, when, caller, target, data);

        // Using named return values because otherwise we get stack too deep
    }

    /**
     * @dev Reverts if the operation is currently scheduled and has not expired.
     * (Note: This function was introduced due to stack too deep errors in schedule.)
     */
    function _checkNotScheduled(bytes32 operationId) private view {
        uint48 prevTimepoint = _schedules[operationId].timepoint;
        if (prevTimepoint != 0 && !_isExpired(prevTimepoint)) {
            revert AccessManagerAlreadyScheduled(operationId);
        }
    }

    /// @inheritdoc IAccessManager
    // Reentrancy is not an issue because permissions are checked on msg.sender. Additionally,
    // _consumeScheduledOp guarantees a scheduled operation is only executed once.
    // slither-disable-next-line reentrancy-no-eth
    function execute(address target, bytes calldata data) public payable virtual returns (uint32) {
        address caller = _msgSender();

        // Fetch restrictions that apply to the caller on the targeted function
        (bool immediate, uint32 setback) = _canCallExtended(caller, target, data);

        // If caller is not authorised, revert
        if (!immediate && setback == 0) {
            revert AccessManagerUnauthorizedCall(caller, target, _checkSelector(data));
        }

        bytes32 operationId = hashOperation(caller, target, data);
        uint32 nonce;

        // If caller is authorised, check operation was scheduled early enough
        // Consume an available schedule even if there is no currently enforced delay
        if (setback != 0 || getSchedule(operationId) != 0) {
            nonce = _consumeScheduledOp(operationId);
        }

        // Mark the target and selector as authorised
        bytes32 executionIdBefore = _executionId;
        _executionId = _getActionId(target, _checkSelector(data));

        // Perform call
        Address.functionCallWithValue(target, data, msg.value);

        // Reset execute identifier
        _executionId = executionIdBefore;

        return nonce;
    }

    /// @inheritdoc IAccessManager
    function cancel(address caller, address target, bytes calldata data) public virtual returns (uint32) {
        address msgsender = _msgSender();
        bytes4 selector = _checkSelector(data);

        bytes32 operationId = hashOperation(caller, target, data);
        if (_schedules[operationId].timepoint == 0) {
            revert AccessManagerNotScheduled(operationId);
        } else if (caller != msgsender) {
            // calls can only be canceled by the account that scheduled them, a global admin, or by a guardian of the required role.
            (bool isAdmin, ) = hasRole(ADMIN_ROLE, msgsender);
            (bool isGuardian, ) = hasRole(getRoleGuardian(getTargetFunctionRole(target, selector)), msgsender);
            if (!isAdmin && !isGuardian) {
                revert AccessManagerUnauthorizedCancel(msgsender, caller, target, selector);
            }
        }

        delete _schedules[operationId].timepoint; // reset the timepoint, keep the nonce
        uint32 nonce = _schedules[operationId].nonce;
        emit OperationCanceled(operationId, nonce);

        return nonce;
    }

    /// @inheritdoc IAccessManager
    function consumeScheduledOp(address caller, bytes calldata data) public virtual {
        address target = _msgSender();
        if (IAccessManaged(target).isConsumingScheduledOp() != IAccessManaged.isConsumingScheduledOp.selector) {
            revert AccessManagerUnauthorizedConsume(target);
        }
        _consumeScheduledOp(hashOperation(caller, target, data));
    }

    /**
     * @dev Internal variant of {consumeScheduledOp} that operates on bytes32 operationId.
     *
     * Returns the nonce of the scheduled operation that is consumed.
     */
    function _consumeScheduledOp(bytes32 operationId) internal virtual returns (uint32) {
        uint48 timepoint = _schedules[operationId].timepoint;
        uint32 nonce = _schedules[operationId].nonce;

        if (timepoint == 0) {
            revert AccessManagerNotScheduled(operationId);
        } else if (timepoint > Time.timestamp()) {
            revert AccessManagerNotReady(operationId);
        } else if (_isExpired(timepoint)) {
            revert AccessManagerExpired(operationId);
        }

        delete _schedules[operationId].timepoint; // reset the timepoint, keep the nonce
        emit OperationExecuted(operationId, nonce);

        return nonce;
    }

    /// @inheritdoc IAccessManager
    function hashOperation(address caller, address target, bytes calldata data) public view virtual returns (bytes32) {
        return keccak256(abi.encode(caller, target, data));
    }

    // ==================================================== OTHERS ====================================================
    /// @inheritdoc IAccessManager
    function updateAuthority(address target, address newAuthority) public virtual onlyAuthorized {
        IAccessManaged(target).setAuthority(newAuthority);
    }

    // ================================================= ADMIN LOGIC ==================================================
    /**
     * @dev Check if the current call is authorized according to admin logic.
     */
    function _checkAuthorized() private {
        address caller = _msgSender();
        (bool immediate, uint32 delay) = _canCallSelf(caller, _msgData());
        if (!immediate) {
            if (delay == 0) {
                (, uint64 requiredRole, ) = _getAdminRestrictions(_msgData());
                revert AccessManagerUnauthorizedAccount(caller, requiredRole);
            } else {
                _consumeScheduledOp(hashOperation(caller, address(this), _msgData()));
            }
        }
    }

    /**
     * @dev Get the admin restrictions of a given function call based on the function and arguments involved.
     *
     * Returns:
     * - bool restricted: does this data match a restricted operation
     * - uint64: which role is this operation restricted to
     * - uint32: minimum delay to enforce for that operation (max between operation's delay and admin's execution delay)
     */
    function _getAdminRestrictions(
        bytes calldata data
    ) private view returns (bool restricted, uint64 roleAdminId, uint32 executionDelay) {
        if (data.length < 4) {
            return (false, 0, 0);
        }

        bytes4 selector = _checkSelector(data);

        // Restricted to ADMIN with no delay beside any execution delay the caller may have
        if (
            selector == this.labelRole.selector ||
            selector == this.setRoleAdmin.selector ||
            selector == this.setRoleGuardian.selector ||
            selector == this.setGrantDelay.selector ||
            selector == this.setTargetAdminDelay.selector
        ) {
            return (true, ADMIN_ROLE, 0);
        }

        // Restricted to ADMIN with the admin delay corresponding to the target
        if (
            selector == this.updateAuthority.selector ||
            selector == this.setTargetClosed.selector ||
            selector == this.setTargetFunctionRole.selector ||
            selector == this.setTargetActionRole.selector
        ) {
            // First argument is a target.
            address target = abi.decode(data[0x04:0x24], (address));
            uint32 delay = getTargetAdminDelay(target);
            return (true, ADMIN_ROLE, delay);
        }

        // Restricted to that role's admin with no delay beside any execution delay the caller may have.
        if (selector == this.grantRole.selector || selector == this.revokeRole.selector) {
            // First argument is a roleId.
            uint64 roleId = abi.decode(data[0x04:0x24], (uint64));
            return (true, getRoleAdmin(roleId), 0);
        }

        return (false, 0, 0);
    }

    // =================================================== HELPERS ====================================================
    /**
     * @dev An extended version of {canCall} for internal usage that checks {_canCallSelf}
     * when the target is this contract.
     *
     * Returns:
     * - bool immediate: whether the operation can be executed immediately (with no delay)
     * - uint32 delay: the execution delay
     */
    function _canCallExtended(
        address caller,
        address target,
        bytes calldata data
    ) private view returns (bool immediate, uint32 delay) {
        if (target == address(this)) {
            return _canCallSelf(caller, data);
        } else {
            return data.length < 4 ? (false, 0) : canCall(caller, target, _checkSelector(data));
        }
    }

    /**
     * @dev A version of {canCall} that checks for admin restrictions in this contract.
     */
    function _canCallSelf(address caller, bytes calldata data) private view returns (bool immediate, uint32 delay) {
        if (data.length < 4) {
            return (false, 0);
        }

        if (caller == address(this)) {
            // Caller is AccessManager, this means the call was sent through {execute} and it already checked
            // permissions. We verify that the call "identifier", which is set during {execute}, is correct.
            return (_isExecuting(address(this), _checkSelector(data)), 0);
        }

        (bool enabled, uint64 roleId, uint32 operationDelay) = _getAdminRestrictions(data);
        if (!enabled) {
            return (false, 0);
        }

        (bool inRole, uint32 executionDelay) = hasRole(roleId, caller);
        if (!inRole) {
            return (false, 0);
        }

        // downcast is safe because both options are uint32
        delay = uint32(Math.max(operationDelay, executionDelay));
        return (delay == 0, delay);
    }

    /**
     * @dev Returns true if a call with `target` and `selector` is being executed via {executed}.
     */
    function _isExecuting(address target, bytes4 selector) private view returns (bool) {
        return _executionId == _getActionId(target, selector);
    }

    /**
     * @dev Returns true if a schedule timepoint is past its expiration deadline.
     */
    function _isExpired(uint48 timepoint) private view returns (bool) {
        return timepoint + expiration() <= Time.timestamp();
    }

    /**
     * @dev Extracts the selector from calldata. Panics if data is not at least 4 bytes
     */
    function _checkSelector(bytes calldata data) private pure returns (bytes4) {
        return bytes4(data[0:4]);
    }

    function _getActionId(address target, bytes4 selector) private pure returns (bytes32) {
        return _getActionId(bytes32(uint256(uint160(target))), selector);
    }

    function _getActionId(bytes32 actionIdDisambiguator, bytes4 selector) private pure returns (bytes32) {
        return keccak256(abi.encodePacked(actionIdDisambiguator, selector));
    }

}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/manager/IAccessManager.sol)

pragma solidity ^0.8.20;

import {IAccessManaged} from "./IAccessManaged.sol";
import {Time} from "../../utils/types/Time.sol";

interface IAccessManager {
    /**
     * @dev A delayed operation was scheduled.
     */
    event OperationScheduled(
        bytes32 indexed operationId,
        uint32 indexed nonce,
        uint48 schedule,
        address caller,
        address target,
        bytes data
    );

    /**
     * @dev A scheduled operation was executed.
     */
    event OperationExecuted(bytes32 indexed operationId, uint32 indexed nonce);

    /**
     * @dev A scheduled operation was canceled.
     */
    event OperationCanceled(bytes32 indexed operationId, uint32 indexed nonce);

    /**
     * @dev Informational labelling for a roleId.
     */
    event RoleLabel(uint64 indexed roleId, string label);

    /**
     * @dev Emitted when `account` is granted `roleId`.
     *
     * NOTE: The meaning of the `since` argument depends on the `newMember` argument.
     * If the role is granted to a new member, the `since` argument indicates when the account becomes a member of the role,
     * otherwise it indicates the execution delay for this account and roleId is updated.
     */
    event RoleGranted(uint64 indexed roleId, address indexed account, uint32 delay, uint48 since, bool newMember);

    /**
     * @dev Emitted when `account` membership or `roleId` is revoked. Unlike granting, revoking is instantaneous.
     */
    event RoleRevoked(uint64 indexed roleId, address indexed account);

    /**
     * @dev Role acting as admin over a given `roleId` is updated.
     */
    event RoleAdminChanged(uint64 indexed roleId, uint64 indexed admin);

    /**
     * @dev Role acting as guardian over a given `roleId` is updated.
     */
    event RoleGuardianChanged(uint64 indexed roleId, uint64 indexed guardian);

    /**
     * @dev Grant delay for a given `roleId` will be updated to `delay` when `since` is reached.
     */
    event RoleGrantDelayChanged(uint64 indexed roleId, uint32 delay, uint48 since);

    /**
     * @dev Target mode is updated (true = closed, false = open).
     */
    event TargetClosed(address indexed target, bool closed);

    /**
     * @dev Role required to invoke `selector` on `target` is updated to `roleId`.
     */
    event TargetFunctionRoleUpdated(address indexed target, bytes4 selector, uint64 indexed roleId);

    /**
     * @dev Admin delay for a given `target` will be updated to `delay` when `since` is reached.
     */
    event TargetAdminDelayUpdated(address indexed target, uint32 delay, uint48 since);

    error AccessManagerAlreadyScheduled(bytes32 operationId);
    error AccessManagerNotScheduled(bytes32 operationId);
    error AccessManagerNotReady(bytes32 operationId);
    error AccessManagerExpired(bytes32 operationId);
    error AccessManagerLockedAccount(address account);
    error AccessManagerLockedRole(uint64 roleId);
    error AccessManagerBadConfirmation();
    error AccessManagerUnauthorizedAccount(address msgsender, uint64 roleId);
    error AccessManagerUnauthorizedCall(address caller, address target, bytes4 selector);
    error AccessManagerUnauthorizedConsume(address target);
    error AccessManagerUnauthorizedCancel(address msgsender, address caller, address target, bytes4 selector);
    error AccessManagerInvalidInitialAdmin(address initialAdmin);

    /**
     * @dev Check if an address (`caller`) is authorised to call a given function on a given contract directly (with
     * no restriction). Additionally, it returns the delay needed to perform the call indirectly through the {schedule}
     * & {execute} workflow.
     *
     * This function is usually called by the targeted contract to control immediate execution of restricted functions.
     * Therefore we only return true if the call can be performed without any delay. If the call is subject to a
     * previously set delay (not zero), then the function should return false and the caller should schedule the operation
     * for future execution.
     *
     * If `immediate` is true, the delay can be disregarded and the operation can be immediately executed, otherwise
     * the operation can be executed if and only if delay is greater than 0.
     *
     * NOTE: The IAuthority interface does not include the `uint32` delay. This is an extension of that interface that
     * is backward compatible. Some contracts may thus ignore the second return argument. In that case they will fail
     * to identify the indirect workflow, and will consider calls that require a delay to be forbidden.
     *
     * NOTE: This function does not report the permissions of this manager itself. These are defined by the
     * {_canCallSelf} function instead.
     */
    function canCall(
        address caller,
        address target,
        bytes4 selector
    ) external view returns (bool allowed, uint32 delay);

    /**
     * @dev Expiration delay for scheduled proposals. Defaults to 1 week.
     *
     * IMPORTANT: Avoid overriding the expiration with 0. Otherwise every contract proposal will be expired immediately,
     * disabling any scheduling usage.
     */
    function expiration() external view returns (uint32);

    /**
     * @dev Minimum setback for all delay updates, with the exception of execution delays. It
     * can be increased without setback (and reset via {revokeRole} in the case event of an
     * accidental increase). Defaults to 5 days.
     */
    function minSetback() external view returns (uint32);

    /**
     * @dev Get whether the contract is closed disabling any access. Otherwise role permissions are applied.
     */
    function isTargetClosed(address target) external view returns (bool);

    /**
     * @dev Get the role required to call a function.
     */
    function getTargetFunctionRole(address target, bytes4 selector) external view returns (uint64);

    /**
     * @dev Get the admin delay for a target contract. Changes to contract configuration are subject to this delay.
     */
    function getTargetAdminDelay(address target) external view returns (uint32);

    /**
     * @dev Get the id of the role that acts as an admin for the given role.
     *
     * The admin permission is required to grant the role, revoke the role and update the execution delay to execute
     * an operation that is restricted to this role.
     */
    function getRoleAdmin(uint64 roleId) external view returns (uint64);

    /**
     * @dev Get the role that acts as a guardian for a given role.
     *
     * The guardian permission allows canceling operations that have been scheduled under the role.
     */
    function getRoleGuardian(uint64 roleId) external view returns (uint64);

    /**
     * @dev Get the role current grant delay.
     *
     * Its value may change at any point without an event emitted following a call to {setGrantDelay}.
     * Changes to this value, including effect timepoint are notified in advance by the {RoleGrantDelayChanged} event.
     */
    function getRoleGrantDelay(uint64 roleId) external view returns (uint32);

    /**
     * @dev Get the access details for a given account for a given role. These details include the timepoint at which
     * membership becomes active, and the delay applied to all operation by this user that requires this permission
     * level.
     *
     * Returns:
     * [0] Timestamp at which the account membership becomes valid. 0 means role is not granted.
     * [1] Current execution delay for the account.
     * [2] Pending execution delay for the account.
     * [3] Timestamp at which the pending execution delay will become active. 0 means no delay update is scheduled.
     */
    function getAccess(uint64 roleId, address account) external view returns (uint48, uint32, uint32, uint48);

    /**
     * @dev Check if a given account currently has the permission level corresponding to a given role. Note that this
     * permission might be associated with an execution delay. {getAccess} can provide more details.
     */
    function hasRole(uint64 roleId, address account) external view returns (bool, uint32);

    /**
     * @dev Give a label to a role, for improved role discoverability by UIs.
     *
     * Requirements:
     *
     * - the caller must be a global admin
     *
     * Emits a {RoleLabel} event.
     */
    function labelRole(uint64 roleId, string calldata label) external;

    /**
     * @dev Add `account` to `roleId`, or change its execution delay.
     *
     * This gives the account the authorization to call any function that is restricted to this role. An optional
     * execution delay (in seconds) can be set. If that delay is non 0, the user is required to schedule any operation
     * that is restricted to members of this role. The user will only be able to execute the operation after the delay has
     * passed, before it has expired. During this period, admin and guardians can cancel the operation (see {cancel}).
     *
     * If the account has already been granted this role, the execution delay will be updated. This update is not
     * immediate and follows the delay rules. For example, if a user currently has a delay of 3 hours, and this is
     * called to reduce that delay to 1 hour, the new delay will take some time to take effect, enforcing that any
     * operation executed in the 3 hours that follows this update was indeed scheduled before this update.
     *
     * Requirements:
     *
     * - the caller must be an admin for the role (see {getRoleAdmin})
     * - granted role must not be the `PUBLIC_ROLE`
     *
     * Emits a {RoleGranted} event.
     */
    function grantRole(uint64 roleId, address account, uint32 executionDelay) external;

    /**
     * @dev Remove an account from a role, with immediate effect. If the account does not have the role, this call has
     * no effect.
     *
     * Requirements:
     *
     * - the caller must be an admin for the role (see {getRoleAdmin})
     * - revoked role must not be the `PUBLIC_ROLE`
     *
     * Emits a {RoleRevoked} event if the account had the role.
     */
    function revokeRole(uint64 roleId, address account) external;

    /**
     * @dev Renounce role permissions for the calling account with immediate effect. If the sender is not in
     * the role this call has no effect.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     *
     * Emits a {RoleRevoked} event if the account had the role.
     */
    function renounceRole(uint64 roleId, address callerConfirmation) external;

    /**
     * @dev Change admin role for a given role.
     *
     * Requirements:
     *
     * - the caller must be a global admin
     *
     * Emits a {RoleAdminChanged} event
     */
    function setRoleAdmin(uint64 roleId, uint64 admin) external;

    /**
     * @dev Change guardian role for a given role.
     *
     * Requirements:
     *
     * - the caller must be a global admin
     *
     * Emits a {RoleGuardianChanged} event
     */
    function setRoleGuardian(uint64 roleId, uint64 guardian) external;

    /**
     * @dev Update the delay for granting a `roleId`.
     *
     * Requirements:
     *
     * - the caller must be a global admin
     *
     * Emits a {RoleGrantDelayChanged} event.
     */
    function setGrantDelay(uint64 roleId, uint32 newDelay) external;

    /**
     * @dev Set the role required to call functions identified by the `selectors` in the `target` contract.
     *
     * Requirements:
     *
     * - the caller must be a global admin
     *
     * Emits a {TargetFunctionRoleUpdated} event per selector.
     */
    function setTargetFunctionRole(address target, bytes4[] calldata selectors, uint64 roleId) external;

    /**
     * @dev Set the delay for changing the configuration of a given target contract.
     *
     * Requirements:
     *
     * - the caller must be a global admin
     *
     * Emits a {TargetAdminDelayUpdated} event.
     */
    function setTargetAdminDelay(address target, uint32 newDelay) external;

    /**
     * @dev Set the closed flag for a contract.
     *
     * Requirements:
     *
     * - the caller must be a global admin
     *
     * Emits a {TargetClosed} event.
     */
    function setTargetClosed(address target, bool closed) external;

    /**
     * @dev Return the timepoint at which a scheduled operation will be ready for execution. This returns 0 if the
     * operation is not yet scheduled, has expired, was executed, or was canceled.
     */
    function getSchedule(bytes32 id) external view returns (uint48);

    /**
     * @dev Return the nonce for the latest scheduled operation with a given id. Returns 0 if the operation has never
     * been scheduled.
     */
    function getNonce(bytes32 id) external view returns (uint32);

    /**
     * @dev Schedule a delayed operation for future execution, and return the operation identifier. It is possible to
     * choose the timestamp at which the operation becomes executable as long as it satisfies the execution delays
     * required for the caller. The special value zero will automatically set the earliest possible time.
     *
     * Returns the `operationId` that was scheduled. Since this value is a hash of the parameters, it can reoccur when
     * the same parameters are used; if this is relevant, the returned `nonce` can be used to uniquely identify this
     * scheduled operation from other occurrences of the same `operationId` in invocations of {execute} and {cancel}.
     *
     * Emits a {OperationScheduled} event.
     *
     * NOTE: It is not possible to concurrently schedule more than one operation with the same `target` and `data`. If
     * this is necessary, a random byte can be appended to `data` to act as a salt that will be ignored by the target
     * contract if it is using standard Solidity ABI encoding.
     */
    function schedule(address target, bytes calldata data, uint48 when) external returns (bytes32, uint32);

    /**
     * @dev Execute a function that is delay restricted, provided it was properly scheduled beforehand, or the
     * execution delay is 0.
     *
     * Returns the nonce that identifies the previously scheduled operation that is executed, or 0 if the
     * operation wasn't previously scheduled (if the caller doesn't have an execution delay).
     *
     * Emits an {OperationExecuted} event only if the call was scheduled and delayed.
     */
    function execute(address target, bytes calldata data) external payable returns (uint32);

    /**
     * @dev Cancel a scheduled (delayed) operation. Returns the nonce that identifies the previously scheduled
     * operation that is cancelled.
     *
     * Requirements:
     *
     * - the caller must be the proposer, a guardian of the targeted function, or a global admin
     *
     * Emits a {OperationCanceled} event.
     */
    function cancel(address caller, address target, bytes calldata data) external returns (uint32);

    /**
     * @dev Consume a scheduled operation targeting the caller. If such an operation exists, mark it as consumed
     * (emit an {OperationExecuted} event and clean the state). Otherwise, throw an error.
     *
     * This is useful for contract that want to enforce that calls targeting them were scheduled on the manager,
     * with all the verifications that it implies.
     *
     * Emit a {OperationExecuted} event.
     */
    function consumeScheduledOp(address caller, bytes calldata data) external;

    /**
     * @dev Hashing function for delayed operations.
     */
    function hashOperation(address caller, address target, bytes calldata data) external view returns (bytes32);

    /**
     * @dev Changes the authority of a target managed by this manager instance.
     *
     * Requirements:
     *
     * - the caller must be a global admin
     */
    function updateAuthority(address target, address newAuthority) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/manager/IAccessManaged.sol)

pragma solidity ^0.8.20;

interface IAccessManaged {
    /**
     * @dev Authority that manages this contract was updated.
     */
    event AuthorityUpdated(address authority);

    error AccessManagedUnauthorized(address caller);
    error AccessManagedRequiredDelay(address caller, uint32 delay);
    error AccessManagedInvalidAuthority(address authority);

    /**
     * @dev Returns the current authority.
     */
    function authority() external view returns (address);

    /**
     * @dev Transfers control to a new authority. The caller must be the current authority.
     */
    function setAuthority(address) external;

    /**
     * @dev Returns true only in the context of a delayed restricted call, at the moment that the scheduled operation is
     * being consumed. Prevents denial of service for delayed restricted calls in the case that the contract performs
     * attacker controlled calls.
     */
    function isConsumingScheduledOp() external view returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Multicall.sol)

pragma solidity ^0.8.20;

import {Address} from "./Address.sol";

/**
 * @dev Provides a function to batch together multiple calls in a single external call.
 */
abstract contract Multicall {
    /**
     * @dev Receives and executes a batch of function calls on this contract.
     * @custom:oz-upgrades-unsafe-allow-reachable delegatecall
     */
    function multicall(bytes[] calldata data) external virtual returns (bytes[] memory results) {
        results = new bytes[](data.length);
        for (uint256 i = 0; i < data.length; i++) {
            results[i] = Address.functionDelegateCall(address(this), data[i]);
        }
        return results;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/types/Time.sol)

pragma solidity ^0.8.20;

import {Math} from "../math/Math.sol";
import {SafeCast} from "../math/SafeCast.sol";

/**
 * @dev This library provides helpers for manipulating time-related objects.
 *
 * It uses the following types:
 * - `uint48` for timepoints
 * - `uint32` for durations
 *
 * While the library doesn't provide specific types for timepoints and duration, it does provide:
 * - a `Delay` type to represent duration that can be programmed to change value automatically at a given point
 * - additional helper functions
 */
library Time {
    using Time for *;

    /**
     * @dev Get the block timestamp as a Timepoint.
     */
    function timestamp() internal view returns (uint48) {
        return SafeCast.toUint48(block.timestamp);
    }

    /**
     * @dev Get the block number as a Timepoint.
     */
    function blockNumber() internal view returns (uint48) {
        return SafeCast.toUint48(block.number);
    }

    // ==================================================== Delay =====================================================
    /**
     * @dev A `Delay` is a uint32 duration that can be programmed to change value automatically at a given point in the
     * future. The "effect" timepoint describes when the transitions happens from the "old" value to the "new" value.
     * This allows updating the delay applied to some operation while keeping some guarantees.
     *
     * In particular, the {update} function guarantees that if the delay is reduced, the old delay still applies for
     * some time. For example if the delay is currently 7 days to do an upgrade, the admin should not be able to set
     * the delay to 0 and upgrade immediately. If the admin wants to reduce the delay, the old delay (7 days) should
     * still apply for some time.
     *
     *
     * The `Delay` type is 112 bits long, and packs the following:
     *
     * ```
     *   | [uint48]: effect date (timepoint)
     *   |           | [uint32]: value before (duration)
     *   ↓           ↓       ↓ [uint32]: value after (duration)
     * 0xAAAAAAAAAAAABBBBBBBBCCCCCCCC
     * ```
     *
     * NOTE: The {get} and {withUpdate} functions operate using timestamps. Block number based delays are not currently
     * supported.
     */
    type Delay is uint112;

    /**
     * @dev Wrap a duration into a Delay to add the one-step "update in the future" feature
     */
    function toDelay(uint32 duration) internal pure returns (Delay) {
        return Delay.wrap(duration);
    }

    /**
     * @dev Get the value at a given timepoint plus the pending value and effect timepoint if there is a scheduled
     * change after this timepoint. If the effect timepoint is 0, then the pending value should not be considered.
     */
    function _getFullAt(Delay self, uint48 timepoint) private pure returns (uint32, uint32, uint48) {
        (uint32 valueBefore, uint32 valueAfter, uint48 effect) = self.unpack();
        return effect <= timepoint ? (valueAfter, 0, 0) : (valueBefore, valueAfter, effect);
    }

    /**
     * @dev Get the current value plus the pending value and effect timepoint if there is a scheduled change. If the
     * effect timepoint is 0, then the pending value should not be considered.
     */
    function getFull(Delay self) internal view returns (uint32, uint32, uint48) {
        return _getFullAt(self, timestamp());
    }

    /**
     * @dev Get the current value.
     */
    function get(Delay self) internal view returns (uint32) {
        (uint32 delay, , ) = self.getFull();
        return delay;
    }

    /**
     * @dev Update a Delay object so that it takes a new duration after a timepoint that is automatically computed to
     * enforce the old delay at the moment of the update. Returns the updated Delay object and the timestamp when the
     * new delay becomes effective.
     */
    function withUpdate(
        Delay self,
        uint32 newValue,
        uint32 minSetback
    ) internal view returns (Delay updatedDelay, uint48 effect) {
        uint32 value = self.get();
        uint32 setback = uint32(Math.max(minSetback, value > newValue ? value - newValue : 0));
        effect = timestamp() + setback;
        return (pack(value, newValue, effect), effect);
    }

    /**
     * @dev Split a delay into its components: valueBefore, valueAfter and effect (transition timepoint).
     */
    function unpack(Delay self) internal pure returns (uint32 valueBefore, uint32 valueAfter, uint48 effect) {
        uint112 raw = Delay.unwrap(self);

        valueAfter = uint32(raw);
        valueBefore = uint32(raw >> 32);
        effect = uint48(raw >> 64);

        return (valueBefore, valueAfter, effect);
    }

    /**
     * @dev pack the components into a Delay object.
     */
    function pack(uint32 valueBefore, uint32 valueAfter, uint48 effect) internal pure returns (Delay) {
        return Delay.wrap((uint112(effect) << 64) | (uint112(valueBefore) << 32) | uint112(valueAfter));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import {IAuthorizer} from "@balancer-labs/v2-interfaces/contracts/vault/IAuthorizer.sol";

interface IExtendedAccessManager is IAuthorizer {

    event TargetActionRoleUpdated(address indexed target, bytes32 actionId, uint64 indexed roleId);

    function getTargetActionRole(address target, bytes32 actionId) external returns(uint64);

    function setTargetActionRole(
        address target,
        bytes32 actionIdDisambiguators,
        bytes4[] calldata selectors,
        uint64 roleId
    ) external ;

}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.

pragma solidity ^0.8.20;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeCast {
    /**
     * @dev Value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);

    /**
     * @dev An int value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedIntToUint(int256 value);

    /**
     * @dev Value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);

    /**
     * @dev An uint value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedUintToInt(uint256 value);

    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        if (value > type(uint248).max) {
            revert SafeCastOverflowedUintDowncast(248, value);
        }
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        if (value > type(uint240).max) {
            revert SafeCastOverflowedUintDowncast(240, value);
        }
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        if (value > type(uint232).max) {
            revert SafeCastOverflowedUintDowncast(232, value);
        }
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        if (value > type(uint224).max) {
            revert SafeCastOverflowedUintDowncast(224, value);
        }
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        if (value > type(uint216).max) {
            revert SafeCastOverflowedUintDowncast(216, value);
        }
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        if (value > type(uint208).max) {
            revert SafeCastOverflowedUintDowncast(208, value);
        }
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        if (value > type(uint200).max) {
            revert SafeCastOverflowedUintDowncast(200, value);
        }
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        if (value > type(uint192).max) {
            revert SafeCastOverflowedUintDowncast(192, value);
        }
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        if (value > type(uint184).max) {
            revert SafeCastOverflowedUintDowncast(184, value);
        }
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        if (value > type(uint176).max) {
            revert SafeCastOverflowedUintDowncast(176, value);
        }
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        if (value > type(uint168).max) {
            revert SafeCastOverflowedUintDowncast(168, value);
        }
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        if (value > type(uint160).max) {
            revert SafeCastOverflowedUintDowncast(160, value);
        }
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        if (value > type(uint152).max) {
            revert SafeCastOverflowedUintDowncast(152, value);
        }
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        if (value > type(uint144).max) {
            revert SafeCastOverflowedUintDowncast(144, value);
        }
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        if (value > type(uint136).max) {
            revert SafeCastOverflowedUintDowncast(136, value);
        }
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        if (value > type(uint128).max) {
            revert SafeCastOverflowedUintDowncast(128, value);
        }
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        if (value > type(uint120).max) {
            revert SafeCastOverflowedUintDowncast(120, value);
        }
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        if (value > type(uint112).max) {
            revert SafeCastOverflowedUintDowncast(112, value);
        }
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        if (value > type(uint104).max) {
            revert SafeCastOverflowedUintDowncast(104, value);
        }
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        if (value > type(uint96).max) {
            revert SafeCastOverflowedUintDowncast(96, value);
        }
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        if (value > type(uint88).max) {
            revert SafeCastOverflowedUintDowncast(88, value);
        }
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        if (value > type(uint80).max) {
            revert SafeCastOverflowedUintDowncast(80, value);
        }
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        if (value > type(uint72).max) {
            revert SafeCastOverflowedUintDowncast(72, value);
        }
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        if (value > type(uint64).max) {
            revert SafeCastOverflowedUintDowncast(64, value);
        }
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        if (value > type(uint56).max) {
            revert SafeCastOverflowedUintDowncast(56, value);
        }
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        if (value > type(uint48).max) {
            revert SafeCastOverflowedUintDowncast(48, value);
        }
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        if (value > type(uint40).max) {
            revert SafeCastOverflowedUintDowncast(40, value);
        }
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        if (value > type(uint32).max) {
            revert SafeCastOverflowedUintDowncast(32, value);
        }
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        if (value > type(uint24).max) {
            revert SafeCastOverflowedUintDowncast(24, value);
        }
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        if (value > type(uint16).max) {
            revert SafeCastOverflowedUintDowncast(16, value);
        }
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        if (value > type(uint8).max) {
            revert SafeCastOverflowedUintDowncast(8, value);
        }
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        if (value < 0) {
            revert SafeCastOverflowedIntToUint(value);
        }
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toInt248(int256 value) internal pure returns (int248 downcasted) {
        downcasted = int248(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(248, value);
        }
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toInt240(int256 value) internal pure returns (int240 downcasted) {
        downcasted = int240(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(240, value);
        }
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toInt232(int256 value) internal pure returns (int232 downcasted) {
        downcasted = int232(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(232, value);
        }
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toInt224(int256 value) internal pure returns (int224 downcasted) {
        downcasted = int224(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(224, value);
        }
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toInt216(int256 value) internal pure returns (int216 downcasted) {
        downcasted = int216(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(216, value);
        }
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toInt208(int256 value) internal pure returns (int208 downcasted) {
        downcasted = int208(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(208, value);
        }
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toInt200(int256 value) internal pure returns (int200 downcasted) {
        downcasted = int200(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(200, value);
        }
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toInt192(int256 value) internal pure returns (int192 downcasted) {
        downcasted = int192(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(192, value);
        }
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toInt184(int256 value) internal pure returns (int184 downcasted) {
        downcasted = int184(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(184, value);
        }
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toInt176(int256 value) internal pure returns (int176 downcasted) {
        downcasted = int176(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(176, value);
        }
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toInt168(int256 value) internal pure returns (int168 downcasted) {
        downcasted = int168(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(168, value);
        }
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toInt160(int256 value) internal pure returns (int160 downcasted) {
        downcasted = int160(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(160, value);
        }
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toInt152(int256 value) internal pure returns (int152 downcasted) {
        downcasted = int152(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(152, value);
        }
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toInt144(int256 value) internal pure returns (int144 downcasted) {
        downcasted = int144(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(144, value);
        }
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toInt136(int256 value) internal pure returns (int136 downcasted) {
        downcasted = int136(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(136, value);
        }
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toInt128(int256 value) internal pure returns (int128 downcasted) {
        downcasted = int128(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(128, value);
        }
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toInt120(int256 value) internal pure returns (int120 downcasted) {
        downcasted = int120(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(120, value);
        }
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toInt112(int256 value) internal pure returns (int112 downcasted) {
        downcasted = int112(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(112, value);
        }
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toInt104(int256 value) internal pure returns (int104 downcasted) {
        downcasted = int104(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(104, value);
        }
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toInt96(int256 value) internal pure returns (int96 downcasted) {
        downcasted = int96(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(96, value);
        }
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toInt88(int256 value) internal pure returns (int88 downcasted) {
        downcasted = int88(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(88, value);
        }
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toInt80(int256 value) internal pure returns (int80 downcasted) {
        downcasted = int80(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(80, value);
        }
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toInt72(int256 value) internal pure returns (int72 downcasted) {
        downcasted = int72(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(72, value);
        }
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toInt64(int256 value) internal pure returns (int64 downcasted) {
        downcasted = int64(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(64, value);
        }
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toInt56(int256 value) internal pure returns (int56 downcasted) {
        downcasted = int56(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(56, value);
        }
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toInt48(int256 value) internal pure returns (int48 downcasted) {
        downcasted = int48(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(48, value);
        }
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toInt40(int256 value) internal pure returns (int40 downcasted) {
        downcasted = int40(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(40, value);
        }
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toInt32(int256 value) internal pure returns (int32 downcasted) {
        downcasted = int32(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(32, value);
        }
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toInt24(int256 value) internal pure returns (int24 downcasted) {
        downcasted = int24(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(24, value);
        }
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toInt16(int256 value) internal pure returns (int16 downcasted) {
        downcasted = int16(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(16, value);
        }
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toInt8(int256 value) internal pure returns (int8 downcasted) {
        downcasted = int8(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(8, value);
        }
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        if (value > uint256(type(int256).max)) {
            revert SafeCastOverflowedUintToInt(value);
        }
        return int256(value);
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity >=0.7.0 <0.9.0;

interface IAuthorizer {
    /**
     * @dev Returns true if `account` can perform the action described by `actionId` in the contract `where`.
     */
    function canPerform(
        bytes32 actionId,
        address account,
        address where
    ) external view returns (bool);
}

{
  "remappings": [
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "forge-std/=lib/forge-std/src/",
    "uniswap-v3-core/=lib/v3-core/",
    "chainlink/=lib/chainlink/",
    "prb-math/=lib/prb-math/src/",
    "pendle-core/=lib/pendle-core-v2-public/contracts/",
    "@layerzerolabs/solidity-examples/=lib/lze-solidity-examples/contracts/",
    "@openzeppelin/contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/contracts/",
    "@openzeppelin/contracts/=lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/",
    "vulcan/=lib/vulcan/src/",
    "forge-safe/=lib/forge-safe/src/",
    "@balancer-labs/v2-interfaces/=lib/balancer-v2-monorepo/pkg/interfaces/",
    "@layerzerolabs/lz-evm-oapp-v2/=node_modules/@layerzerolabs/lz-evm-oapp-v2/",
    "@layerzerolabs/lz-evm-protocol-v2/=node_modules/@layerzerolabs/lz-evm-protocol-v2/",
    "@layerzerolabs/lz-evm-messagelib-v2/=node_modules/@layerzerolabs/lz-evm-messagelib-v2/",
    "@layerzerolabs/lz-evm-v1-0.7/=node_modules/@layerzerolabs/lz-evm-v1-0.7/",
    "@layerzerolabs/test-devtools-evm-foundry/=lib/devtools/packages/test-devtools-evm-foundry/",
    "solidity-bytes-utils/contracts/=lib/solidity-bytes-utils/contracts/",
    "@prb/test/=lib/prb-math/lib/prb-test/src/",
    "balancer-v2-monorepo/=lib/balancer-v2-monorepo/",
    "erc4626-tests/=lib/openzeppelin-contracts-upgradeable/lib/erc4626-tests/",
    "lze-solidity-examples/=lib/lze-solidity-examples/contracts/",
    "openzeppelin-contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "pendle-core-v2-public/=lib/pendle-core-v2-public/contracts/",
    "prb-test/=lib/prb-math/lib/prb-test/src/",
    "solidity-stringutils/=lib/forge-safe/lib/surl/lib/solidity-stringutils/",
    "solmate/=lib/forge-safe/lib/solmate/src/",
    "surl/=lib/forge-safe/lib/surl/",
    "v3-core/=lib/v3-core/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 1000
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "shanghai",
  "viaIR": true,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"initialAdmin","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"bytes32","name":"operationId","type":"bytes32"}],"name":"AccessManagerAlreadyScheduled","type":"error"},{"inputs":[],"name":"AccessManagerBadConfirmation","type":"error"},{"inputs":[{"internalType":"bytes32","name":"operationId","type":"bytes32"}],"name":"AccessManagerExpired","type":"error"},{"inputs":[{"internalType":"address","name":"initialAdmin","type":"address"}],"name":"AccessManagerInvalidInitialAdmin","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"AccessManagerLockedAccount","type":"error"},{"inputs":[{"internalType":"uint64","name":"roleId","type":"uint64"}],"name":"AccessManagerLockedRole","type":"error"},{"inputs":[{"internalType":"bytes32","name":"operationId","type":"bytes32"}],"name":"AccessManagerNotReady","type":"error"},{"inputs":[{"internalType":"bytes32","name":"operationId","type":"bytes32"}],"name":"AccessManagerNotScheduled","type":"error"},{"inputs":[{"internalType":"address","name":"msgsender","type":"address"},{"internalType":"uint64","name":"roleId","type":"uint64"}],"name":"AccessManagerUnauthorizedAccount","type":"error"},{"inputs":[{"internalType":"address","name":"caller","type":"address"},{"internalType":"address","name":"target","type":"address"},{"internalType":"bytes4","name":"selector","type":"bytes4"}],"name":"AccessManagerUnauthorizedCall","type":"error"},{"inputs":[{"internalType":"address","name":"msgsender","type":"address"},{"internalType":"address","name":"caller","type":"address"},{"internalType":"address","name":"target","type":"address"},{"internalType":"bytes4","name":"selector","type":"bytes4"}],"name":"AccessManagerUnauthorizedCancel","type":"error"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AccessManagerUnauthorizedConsume","type":"error"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"AddressInsufficientBalance","type":"error"},{"inputs":[],"name":"FailedInnerCall","type":"error"},{"inputs":[{"internalType":"uint8","name":"bits","type":"uint8"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"SafeCastOverflowedUintDowncast","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"operationId","type":"bytes32"},{"indexed":true,"internalType":"uint32","name":"nonce","type":"uint32"}],"name":"OperationCanceled","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"operationId","type":"bytes32"},{"indexed":true,"internalType":"uint32","name":"nonce","type":"uint32"}],"name":"OperationExecuted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"operationId","type":"bytes32"},{"indexed":true,"internalType":"uint32","name":"nonce","type":"uint32"},{"indexed":false,"internalType":"uint48","name":"schedule","type":"uint48"},{"indexed":false,"internalType":"address","name":"caller","type":"address"},{"indexed":false,"internalType":"address","name":"target","type":"address"},{"indexed":false,"internalType":"bytes","name":"data","type":"bytes"}],"name":"OperationScheduled","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint64","name":"roleId","type":"uint64"},{"indexed":true,"internalType":"uint64","name":"admin","type":"uint64"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint64","name":"roleId","type":"uint64"},{"indexed":false,"internalType":"uint32","name":"delay","type":"uint32"},{"indexed":false,"internalType":"uint48","name":"since","type":"uint48"}],"name":"RoleGrantDelayChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint64","name":"roleId","type":"uint64"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":false,"internalType":"uint32","name":"delay","type":"uint32"},{"indexed":false,"internalType":"uint48","name":"since","type":"uint48"},{"indexed":false,"internalType":"bool","name":"newMember","type":"bool"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint64","name":"roleId","type":"uint64"},{"indexed":true,"internalType":"uint64","name":"guardian","type":"uint64"}],"name":"RoleGuardianChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint64","name":"roleId","type":"uint64"},{"indexed":false,"internalType":"string","name":"label","type":"string"}],"name":"RoleLabel","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint64","name":"roleId","type":"uint64"},{"indexed":true,"internalType":"address","name":"account","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"target","type":"address"},{"indexed":false,"internalType":"bytes32","name":"actionId","type":"bytes32"},{"indexed":true,"internalType":"uint64","name":"roleId","type":"uint64"}],"name":"TargetActionRoleUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"target","type":"address"},{"indexed":false,"internalType":"uint32","name":"delay","type":"uint32"},{"indexed":false,"internalType":"uint48","name":"since","type":"uint48"}],"name":"TargetAdminDelayUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"target","type":"address"},{"indexed":false,"internalType":"bool","name":"closed","type":"bool"}],"name":"TargetClosed","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"target","type":"address"},{"indexed":false,"internalType":"bytes4","name":"selector","type":"bytes4"},{"indexed":true,"internalType":"uint64","name":"roleId","type":"uint64"}],"name":"TargetFunctionRoleUpdated","type":"event"},{"inputs":[],"name":"ADMIN_ROLE","outputs":[{"internalType":"uint64","name":"","type":"uint64"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"PUBLIC_ROLE","outputs":[{"internalType":"uint64","name":"","type":"uint64"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"caller","type":"address"},{"internalType":"address","name":"target","type":"address"},{"internalType":"bytes4","name":"selector","type":"bytes4"}],"name":"canCall","outputs":[{"internalType":"bool","name":"immediate","type":"bool"},{"internalType":"uint32","name":"delay","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"actionId","type":"bytes32"},{"internalType":"address","name":"account","type":"address"},{"internalType":"address","name":"where","type":"address"}],"name":"canPerform","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"caller","type":"address"},{"internalType":"address","name":"target","type":"address"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"cancel","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"caller","type":"address"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"consumeScheduledOp","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"target","type":"address"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"execute","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"expiration","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint64","name":"roleId","type":"uint64"},{"internalType":"address","name":"account","type":"address"}],"name":"getAccess","outputs":[{"internalType":"uint48","name":"since","type":"uint48"},{"internalType":"uint32","name":"currentDelay","type":"uint32"},{"internalType":"uint32","name":"pendingDelay","type":"uint32"},{"internalType":"uint48","name":"effect","type":"uint48"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"id","type":"bytes32"}],"name":"getNonce","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint64","name":"roleId","type":"uint64"}],"name":"getRoleAdmin","outputs":[{"internalType":"uint64","name":"","type":"uint64"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint64","name":"roleId","type":"uint64"}],"name":"getRoleGrantDelay","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint64","name":"roleId","type":"uint64"}],"name":"getRoleGuardian","outputs":[{"internalType":"uint64","name":"","type":"uint64"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"id","type":"bytes32"}],"name":"getSchedule","outputs":[{"internalType":"uint48","name":"","type":"uint48"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"target","type":"address"},{"internalType":"bytes32","name":"actionId","type":"bytes32"}],"name":"getTargetActionRole","outputs":[{"internalType":"uint64","name":"","type":"uint64"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"getTargetAdminDelay","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"target","type":"address"},{"internalType":"bytes4","name":"selector","type":"bytes4"}],"name":"getTargetFunctionRole","outputs":[{"internalType":"uint64","name":"","type":"uint64"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint64","name":"roleId","type":"uint64"},{"internalType":"address","name":"account","type":"address"},{"internalType":"uint32","name":"executionDelay","type":"uint32"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint64","name":"roleId","type":"uint64"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"isMember","type":"bool"},{"internalType":"uint32","name":"executionDelay","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"caller","type":"address"},{"internalType":"address","name":"target","type":"address"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"hashOperation","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"isTargetClosed","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint64","name":"roleId","type":"uint64"},{"internalType":"string","name":"label","type":"string"}],"name":"labelRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"minSetback","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes[]","name":"data","type":"bytes[]"}],"name":"multicall","outputs":[{"internalType":"bytes[]","name":"results","type":"bytes[]"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint64","name":"roleId","type":"uint64"},{"internalType":"address","name":"callerConfirmation","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint64","name":"roleId","type":"uint64"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"target","type":"address"},{"internalType":"bytes","name":"data","type":"bytes"},{"internalType":"uint48","name":"when","type":"uint48"}],"name":"schedule","outputs":[{"internalType":"bytes32","name":"operationId","type":"bytes32"},{"internalType":"uint32","name":"nonce","type":"uint32"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint64","name":"roleId","type":"uint64"},{"internalType":"uint32","name":"newDelay","type":"uint32"}],"name":"setGrantDelay","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint64","name":"roleId","type":"uint64"},{"internalType":"uint64","name":"admin","type":"uint64"}],"name":"setRoleAdmin","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint64","name":"roleId","type":"uint64"},{"internalType":"uint64","name":"guardian","type":"uint64"}],"name":"setRoleGuardian","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"target","type":"address"},{"internalType":"bytes32","name":"actionIdDisambiguator","type":"bytes32"},{"internalType":"bytes4[]","name":"selectors","type":"bytes4[]"},{"internalType":"uint64","name":"roleId","type":"uint64"}],"name":"setTargetActionRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"target","type":"address"},{"internalType":"uint32","name":"newDelay","type":"uint32"}],"name":"setTargetAdminDelay","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"target","type":"address"},{"internalType":"bool","name":"closed","type":"bool"}],"name":"setTargetClosed","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"target","type":"address"},{"internalType":"bytes4[]","name":"selectors","type":"bytes4[]"},{"internalType":"uint64","name":"roleId","type":"uint64"}],"name":"setTargetFunctionRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"target","type":"address"},{"internalType":"address","name":"newAuthority","type":"address"}],"name":"updateAuthority","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

0000000000000000000000001ffa05f616f51c0c1de1ea344d78285d56a618d4

-----Decoded View---------------
Arg [0] : initialAdmin (address): 0x1fFA05F616F51C0c1de1ea344d78285D56A618d4

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 0000000000000000000000001ffa05f616f51c0c1de1ea344d78285d56a618d4