Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { IVault } from "../interfaces/IVault.sol";
import { Dripper } from "./Dripper.sol";

/**
 * @title Fixed Rate Dripper
 *
 * Similar to the Dripper, Fixed Rate Dripper drips out yield per second.
 * However the Strategist decides the rate and it doesn't change after
 * a drip.
 *
 */

contract FixedRateDripper is Dripper {
    using SafeERC20 for IERC20;

    event DripRateUpdated(uint192 oldDripRate, uint192 newDripRate);

    /**
     * @dev Verifies that the caller is the Governor or Strategist.
     */
    modifier onlyGovernorOrStrategist() {
        require(
            isGovernor() || msg.sender == IVault(vault).strategistAddr(),
            "Caller is not the Strategist or Governor"
        );
        _;
    }

    constructor(address _vault, address _token) Dripper(_vault, _token) {}

    /// @inheritdoc Dripper
    function setDripDuration(uint256) external virtual override {
        // Not used in FixedRateDripper
        revert("Drip duration disabled");
    }

    /// @inheritdoc Dripper
    function _collect() internal virtual override {
        // Calculate amount to send
        uint256 balance = IERC20(token).balanceOf(address(this));
        uint256 amountToSend = _availableFunds(balance, drip);

        // Update timestamp
        drip.lastCollect = uint64(block.timestamp);

        // Send funds
        IERC20(token).safeTransfer(vault, amountToSend);
    }

    /**
     * @dev Sets the drip rate. Callable by Strategist or Governor.
     *      Can be set to zero to stop dripper.
     * @param _perSecond Rate of WETH to drip per second
     */
    function setDripRate(uint192 _perSecond) external onlyGovernorOrStrategist {
        emit DripRateUpdated(_perSecond, drip.perSecond);

        /**
         * Note: It's important to call `_collect` before updating
         * the drip rate especially on a new proxy contract.
         * When `lastCollect` is not set/initialized, the elapsed
         * time would be calculated as `block.number` seconds,
         * resulting in a huge yield, if `collect` isn't called first.
         */
        // Collect at existing rate
        _collect();

        // Update rate
        drip.perSecond = _perSecond;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeCast.sol)

pragma solidity ^0.8.0;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {
    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits.
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        require(value >= 0, "SafeCast: value must be positive");
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v3.1._
     */
    function toInt128(int256 value) internal pure returns (int128) {
        require(value >= type(int128).min && value <= type(int128).max, "SafeCast: value doesn't fit in 128 bits");
        return int128(value);
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v3.1._
     */
    function toInt64(int256 value) internal pure returns (int64) {
        require(value >= type(int64).min && value <= type(int64).max, "SafeCast: value doesn't fit in 64 bits");
        return int64(value);
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v3.1._
     */
    function toInt32(int256 value) internal pure returns (int32) {
        require(value >= type(int32).min && value <= type(int32).max, "SafeCast: value doesn't fit in 32 bits");
        return int32(value);
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v3.1._
     */
    function toInt16(int256 value) internal pure returns (int16) {
        require(value >= type(int16).min && value <= type(int16).max, "SafeCast: value doesn't fit in 16 bits");
        return int16(value);
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits.
     *
     * _Available since v3.1._
     */
    function toInt8(int256 value) internal pure returns (int8) {
        require(value >= type(int8).min && value <= type(int8).max, "SafeCast: value doesn't fit in 8 bits");
        return int8(value);
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
        return int256(value);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @title Base for contracts that are managed by the Origin Protocol's Governor.
 * @dev Copy of the openzeppelin Ownable.sol contract with nomenclature change
 *      from owner to governor and renounce methods removed. Does not use
 *      Context.sol like Ownable.sol does for simplification.
 * @author Origin Protocol Inc
 */
contract Governable {
    // Storage position of the owner and pendingOwner of the contract
    // keccak256("OUSD.governor");
    bytes32 private constant governorPosition =
        0x7bea13895fa79d2831e0a9e28edede30099005a50d652d8957cf8a607ee6ca4a;

    // keccak256("OUSD.pending.governor");
    bytes32 private constant pendingGovernorPosition =
        0x44c4d30b2eaad5130ad70c3ba6972730566f3e6359ab83e800d905c61b1c51db;

    // keccak256("OUSD.reentry.status");
    bytes32 private constant reentryStatusPosition =
        0x53bf423e48ed90e97d02ab0ebab13b2a235a6bfbe9c321847d5c175333ac4535;

    // See OpenZeppelin ReentrancyGuard implementation
    uint256 constant _NOT_ENTERED = 1;
    uint256 constant _ENTERED = 2;

    event PendingGovernorshipTransfer(
        address indexed previousGovernor,
        address indexed newGovernor
    );

    event GovernorshipTransferred(
        address indexed previousGovernor,
        address indexed newGovernor
    );

    /**
     * @dev Initializes the contract setting the deployer as the initial Governor.
     */
    constructor() {
        _setGovernor(msg.sender);
        emit GovernorshipTransferred(address(0), _governor());
    }

    /**
     * @notice Returns the address of the current Governor.
     */
    function governor() public view returns (address) {
        return _governor();
    }

    /**
     * @dev Returns the address of the current Governor.
     */
    function _governor() internal view returns (address governorOut) {
        bytes32 position = governorPosition;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            governorOut := sload(position)
        }
    }

    /**
     * @dev Returns the address of the pending Governor.
     */
    function _pendingGovernor()
        internal
        view
        returns (address pendingGovernor)
    {
        bytes32 position = pendingGovernorPosition;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            pendingGovernor := sload(position)
        }
    }

    /**
     * @dev Throws if called by any account other than the Governor.
     */
    modifier onlyGovernor() {
        require(isGovernor(), "Caller is not the Governor");
        _;
    }

    /**
     * @notice Returns true if the caller is the current Governor.
     */
    function isGovernor() public view returns (bool) {
        return msg.sender == _governor();
    }

    function _setGovernor(address newGovernor) internal {
        bytes32 position = governorPosition;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(position, newGovernor)
        }
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        bytes32 position = reentryStatusPosition;
        uint256 _reentry_status;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            _reentry_status := sload(position)
        }

        // On the first call to nonReentrant, _notEntered will be true
        require(_reentry_status != _ENTERED, "Reentrant call");

        // Any calls to nonReentrant after this point will fail
        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(position, _ENTERED)
        }

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(position, _NOT_ENTERED)
        }
    }

    function _setPendingGovernor(address newGovernor) internal {
        bytes32 position = pendingGovernorPosition;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(position, newGovernor)
        }
    }

    /**
     * @notice Transfers Governance of the contract to a new account (`newGovernor`).
     * Can only be called by the current Governor. Must be claimed for this to complete
     * @param _newGovernor Address of the new Governor
     */
    function transferGovernance(address _newGovernor) external onlyGovernor {
        _setPendingGovernor(_newGovernor);
        emit PendingGovernorshipTransfer(_governor(), _newGovernor);
    }

    /**
     * @notice Claim Governance of the contract to a new account (`newGovernor`).
     * Can only be called by the new Governor.
     */
    function claimGovernance() external {
        require(
            msg.sender == _pendingGovernor(),
            "Only the pending Governor can complete the claim"
        );
        _changeGovernor(msg.sender);
    }

    /**
     * @dev Change Governance of the contract to a new account (`newGovernor`).
     * @param _newGovernor Address of the new Governor
     */
    function _changeGovernor(address _newGovernor) internal {
        require(_newGovernor != address(0), "New Governor is address(0)");
        emit GovernorshipTransferred(_governor(), _newGovernor);
        _setGovernor(_newGovernor);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { Governable } from "../governance/Governable.sol";
import { IVault } from "../interfaces/IVault.sol";

/**
 * @title OUSD Dripper
 *
 * The dripper contract smooths out the yield from point-in-time yield events
 * and spreads the yield out over a configurable time period. This ensures a
 * continuous per block yield to makes users happy as their next rebase
 * amount is always moving up. Also, this makes historical day to day yields
 * smooth, rather than going from a near zero day, to a large APY day, then
 * back to a near zero day again.
 *
 *
 * Design notes
 * - USDT has a smaller resolution than the number of seconds
 * in a week, which can make per second payouts have a rounding error. However
 * the total effect is not large - cents per day, and this money is
 * not lost, just distributed in the future. While we could use a higher
 * decimal precision for the drip perSecond, we chose simpler code.
 * - By calculating the changing drip rates on collects only, harvests and yield
 * events don't have to call anything on this contract or pay any extra gas.
 * Collect() is already be paying for a single write, since it has to reset
 * the lastCollect time.
 * - By having a collectAndRebase method, and having our external systems call
 * that, the OUSD vault does not need any changes, not even to know the address
 * of the dripper.
 * - A rejected design was to retro-calculate the drip rate on each collect,
 * based on the balance at the time of the collect. While this would have
 * required less state, and would also have made the contract respond more quickly
 * to new income, it would break the predictability that is this contract's entire
 * purpose. If we did this, the amount of fundsAvailable() would make sharp increases
 * when funds were deposited.
 * - When the dripper recalculates the rate, it targets spending the balance over
 * the duration. This means that every time that collect is called, if no
 * new funds have been deposited the duration is being pushed back and the
 * rate decreases. This is expected, and ends up following a smoother but
 * longer curve the more collect() is called without incoming yield.
 *
 */

contract Dripper is Governable {
    using SafeERC20 for IERC20;

    struct Drip {
        uint64 lastCollect; // overflows 262 billion years after the sun dies
        uint192 perSecond; // drip rate per second
    }

    address immutable vault; // OUSD vault
    address immutable token; // token to drip out
    uint256 public dripDuration; // in seconds
    Drip public drip; // active drip parameters

    constructor(address _vault, address _token) {
        vault = _vault;
        token = _token;
    }

    /// @notice How much funds have dripped out already and are currently
    //   available to be sent to the vault.
    /// @return The amount that would be sent if a collect was called
    function availableFunds() external view returns (uint256) {
        uint256 balance = IERC20(token).balanceOf(address(this));
        return _availableFunds(balance, drip);
    }

    /// @notice Collect all dripped funds and send to vault.
    ///  Recalculate new drip rate.
    function collect() external {
        _collect();
    }

    /// @notice Collect all dripped funds, send to vault, recalculate new drip
    ///  rate, and rebase OUSD.
    function collectAndRebase() external {
        _collect();
        IVault(vault).rebase();
    }

    /// @dev Change the drip duration. Governor only.
    /// @param _durationSeconds the number of seconds to drip out the entire
    ///  balance over if no collects were called during that time.
    function setDripDuration(uint256 _durationSeconds)
        external
        virtual
        onlyGovernor
    {
        require(_durationSeconds > 0, "duration must be non-zero");
        dripDuration = _durationSeconds;
        _collect(); // duration change take immediate effect
    }

    /// @dev Transfer out ERC20 tokens held by the contract. Governor only.
    /// @param _asset ERC20 token address
    /// @param _amount amount to transfer
    function transferToken(address _asset, uint256 _amount)
        external
        onlyGovernor
    {
        IERC20(_asset).safeTransfer(governor(), _amount);
    }

    /// @dev Calculate available funds by taking the lower of either the
    ///  currently dripped out funds or the balance available.
    ///  Uses passed in parameters to calculate with for gas savings.
    /// @param _balance current balance in contract
    /// @param _drip current drip parameters
    function _availableFunds(uint256 _balance, Drip memory _drip)
        internal
        view
        returns (uint256)
    {
        uint256 elapsed = block.timestamp - _drip.lastCollect;
        uint256 allowed = (elapsed * _drip.perSecond);
        return (allowed > _balance) ? _balance : allowed;
    }

    /// @dev Sends the currently dripped funds to be vault, and sets
    ///  the new drip rate based on the new balance.
    function _collect() internal virtual {
        // Calculate send
        uint256 balance = IERC20(token).balanceOf(address(this));
        uint256 amountToSend = _availableFunds(balance, drip);
        uint256 remaining = balance - amountToSend;
        // Calculate new drip perSecond
        //   Gas savings by setting entire struct at one time
        drip = Drip({
            perSecond: uint192(remaining / dripDuration),
            lastCollect: uint64(block.timestamp)
        });
        // Send funds
        IERC20(token).safeTransfer(vault, amountToSend);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IBasicToken {
    function symbol() external view returns (string memory);

    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @title Platform interface to integrate with lending platform like Compound, AAVE etc.
 */
interface IStrategy {
    /**
     * @dev Deposit the given asset to platform
     * @param _asset asset address
     * @param _amount Amount to deposit
     */
    function deposit(address _asset, uint256 _amount) external;

    /**
     * @dev Deposit the entire balance of all supported assets in the Strategy
     *      to the platform
     */
    function depositAll() external;

    /**
     * @dev Withdraw given asset from Lending platform
     */
    function withdraw(
        address _recipient,
        address _asset,
        uint256 _amount
    ) external;

    /**
     * @dev Liquidate all assets in strategy and return them to Vault.
     */
    function withdrawAll() external;

    /**
     * @dev Returns the current balance of the given asset.
     */
    function checkBalance(address _asset)
        external
        view
        returns (uint256 balance);

    /**
     * @dev Returns bool indicating whether strategy supports asset.
     */
    function supportsAsset(address _asset) external view returns (bool);

    /**
     * @dev Collect reward tokens from the Strategy.
     */
    function collectRewardTokens() external;

    /**
     * @dev The address array of the reward tokens for the Strategy.
     */
    function getRewardTokenAddresses() external view returns (address[] memory);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import { VaultStorage } from "../vault/VaultStorage.sol";

interface IVault {
    event AssetSupported(address _asset);
    event AssetDefaultStrategyUpdated(address _asset, address _strategy);
    event AssetAllocated(address _asset, address _strategy, uint256 _amount);
    event StrategyApproved(address _addr);
    event StrategyRemoved(address _addr);
    event Mint(address _addr, uint256 _value);
    event Redeem(address _addr, uint256 _value);
    event CapitalPaused();
    event CapitalUnpaused();
    event RebasePaused();
    event RebaseUnpaused();
    event VaultBufferUpdated(uint256 _vaultBuffer);
    event RedeemFeeUpdated(uint256 _redeemFeeBps);
    event PriceProviderUpdated(address _priceProvider);
    event AllocateThresholdUpdated(uint256 _threshold);
    event RebaseThresholdUpdated(uint256 _threshold);
    event StrategistUpdated(address _address);
    event MaxSupplyDiffChanged(uint256 maxSupplyDiff);
    event YieldDistribution(address _to, uint256 _yield, uint256 _fee);
    event TrusteeFeeBpsChanged(uint256 _basis);
    event TrusteeAddressChanged(address _address);
    event SwapperChanged(address _address);
    event SwapAllowedUndervalueChanged(uint256 _basis);
    event SwapSlippageChanged(address _asset, uint256 _basis);
    event Swapped(
        address indexed _fromAsset,
        address indexed _toAsset,
        uint256 _fromAssetAmount,
        uint256 _toAssetAmount
    );
    event StrategyAddedToMintWhitelist(address indexed strategy);
    event StrategyRemovedFromMintWhitelist(address indexed strategy);
    event DripperChanged(address indexed _dripper);
    event WithdrawalRequested(
        address indexed _withdrawer,
        uint256 indexed _requestId,
        uint256 _amount,
        uint256 _queued
    );
    event WithdrawalClaimed(
        address indexed _withdrawer,
        uint256 indexed _requestId,
        uint256 _amount
    );
    event WithdrawalClaimable(uint256 _claimable, uint256 _newClaimable);

    // Governable.sol
    function transferGovernance(address _newGovernor) external;

    function claimGovernance() external;

    function governor() external view returns (address);

    // VaultAdmin.sol
    function setPriceProvider(address _priceProvider) external;

    function priceProvider() external view returns (address);

    function setRedeemFeeBps(uint256 _redeemFeeBps) external;

    function redeemFeeBps() external view returns (uint256);

    function setVaultBuffer(uint256 _vaultBuffer) external;

    function vaultBuffer() external view returns (uint256);

    function setAutoAllocateThreshold(uint256 _threshold) external;

    function autoAllocateThreshold() external view returns (uint256);

    function setRebaseThreshold(uint256 _threshold) external;

    function rebaseThreshold() external view returns (uint256);

    function setStrategistAddr(address _address) external;

    function strategistAddr() external view returns (address);

    function setMaxSupplyDiff(uint256 _maxSupplyDiff) external;

    function maxSupplyDiff() external view returns (uint256);

    function setTrusteeAddress(address _address) external;

    function trusteeAddress() external view returns (address);

    function setTrusteeFeeBps(uint256 _basis) external;

    function trusteeFeeBps() external view returns (uint256);

    function ousdMetaStrategy() external view returns (address);

    function setSwapper(address _swapperAddr) external;

    function setSwapAllowedUndervalue(uint16 _percentageBps) external;

    function setOracleSlippage(address _asset, uint16 _allowedOracleSlippageBps)
        external;

    function supportAsset(address _asset, uint8 _supportsAsset) external;

    function approveStrategy(address _addr) external;

    function removeStrategy(address _addr) external;

    function setAssetDefaultStrategy(address _asset, address _strategy)
        external;

    function assetDefaultStrategies(address _asset)
        external
        view
        returns (address);

    function pauseRebase() external;

    function unpauseRebase() external;

    function rebasePaused() external view returns (bool);

    function pauseCapital() external;

    function unpauseCapital() external;

    function capitalPaused() external view returns (bool);

    function transferToken(address _asset, uint256 _amount) external;

    function priceUnitMint(address asset) external view returns (uint256);

    function priceUnitRedeem(address asset) external view returns (uint256);

    function withdrawAllFromStrategy(address _strategyAddr) external;

    function withdrawAllFromStrategies() external;

    function withdrawFromStrategy(
        address _strategyFromAddress,
        address[] calldata _assets,
        uint256[] calldata _amounts
    ) external;

    function depositToStrategy(
        address _strategyToAddress,
        address[] calldata _assets,
        uint256[] calldata _amounts
    ) external;

    // VaultCore.sol
    function mint(
        address _asset,
        uint256 _amount,
        uint256 _minimumOusdAmount
    ) external;

    function mintForStrategy(uint256 _amount) external;

    function redeem(uint256 _amount, uint256 _minimumUnitAmount) external;

    function burnForStrategy(uint256 _amount) external;

    function redeemAll(uint256 _minimumUnitAmount) external;

    function allocate() external;

    function rebase() external;

    function swapCollateral(
        address fromAsset,
        address toAsset,
        uint256 fromAssetAmount,
        uint256 minToAssetAmount,
        bytes calldata data
    ) external returns (uint256 toAssetAmount);

    function totalValue() external view returns (uint256 value);

    function checkBalance(address _asset) external view returns (uint256);

    function calculateRedeemOutputs(uint256 _amount)
        external
        view
        returns (uint256[] memory);

    function getAssetCount() external view returns (uint256);

    function getAssetConfig(address _asset)
        external
        view
        returns (VaultStorage.Asset memory config);

    function getAllAssets() external view returns (address[] memory);

    function getStrategyCount() external view returns (uint256);

    function swapper() external view returns (address);

    function allowedSwapUndervalue() external view returns (uint256);

    function getAllStrategies() external view returns (address[] memory);

    function isSupportedAsset(address _asset) external view returns (bool);

    function netOusdMintForStrategyThreshold() external view returns (uint256);

    function setOusdMetaStrategy(address _ousdMetaStrategy) external;

    function setNetOusdMintForStrategyThreshold(uint256 _threshold) external;

    function netOusdMintedForStrategy() external view returns (int256);

    function setDripper(address _dripper) external;

    function dripper() external view returns (address);

    function weth() external view returns (address);

    function cacheWETHAssetIndex() external;

    function wethAssetIndex() external view returns (uint256);

    function initialize(address, address) external;

    function setAdminImpl(address) external;

    function removeAsset(address _asset) external;

    // These are OETH specific functions
    function addWithdrawalQueueLiquidity() external;

    function requestWithdrawal(uint256 _amount)
        external
        returns (uint256 requestId, uint256 queued);

    function claimWithdrawal(uint256 requestId)
        external
        returns (uint256 amount);

    function claimWithdrawals(uint256[] memory requestIds)
        external
        returns (uint256[] memory amounts, uint256 totalAmount);

    function withdrawalQueueMetadata()
        external
        view
        returns (VaultStorage.WithdrawalQueueMetadata memory);

    function withdrawalRequests(uint256 requestId)
        external
        view
        returns (VaultStorage.WithdrawalRequest memory);

    // OETHb specific functions
    function addStrategyToMintWhitelist(address strategyAddr) external;

    function removeStrategyFromMintWhitelist(address strategyAddr) external;

    function isMintWhitelistedStrategy(address strategyAddr)
        external
        view
        returns (bool);

    function withdrawalClaimDelay() external view returns (uint256);

    function setWithdrawalClaimDelay(uint256 newDelay) external;
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

/**
 * @title OUSD Token Contract
 * @dev ERC20 compatible contract for OUSD
 * @dev Implements an elastic supply
 * @author Origin Protocol Inc
 */
import { Governable } from "../governance/Governable.sol";
import { SafeCast } from "@openzeppelin/contracts/utils/math/SafeCast.sol";

contract OUSD is Governable {
    using SafeCast for int256;
    using SafeCast for uint256;

    /// @dev Event triggered when the supply changes
    /// @param totalSupply Updated token total supply
    /// @param rebasingCredits Updated token rebasing credits
    /// @param rebasingCreditsPerToken Updated token rebasing credits per token
    event TotalSupplyUpdatedHighres(
        uint256 totalSupply,
        uint256 rebasingCredits,
        uint256 rebasingCreditsPerToken
    );
    /// @dev Event triggered when an account opts in for rebasing
    /// @param account Address of the account
    event AccountRebasingEnabled(address account);
    /// @dev Event triggered when an account opts out of rebasing
    /// @param account Address of the account
    event AccountRebasingDisabled(address account);
    /// @dev Emitted when `value` tokens are moved from one account `from` to
    ///      another `to`.
    /// @param from Address of the account tokens are moved from
    /// @param to Address of the account tokens are moved to
    /// @param value Amount of tokens transferred
    event Transfer(address indexed from, address indexed to, uint256 value);
    /// @dev Emitted when the allowance of a `spender` for an `owner` is set by
    ///      a call to {approve}. `value` is the new allowance.
    /// @param owner Address of the owner approving allowance
    /// @param spender Address of the spender allowance is granted to
    /// @param value Amount of tokens spender can transfer
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
    /// @dev Yield resulting from {changeSupply} that a `source` account would
    ///      receive is directed to `target` account.
    /// @param source Address of the source forwarding the yield
    /// @param target Address of the target receiving the yield
    event YieldDelegated(address source, address target);
    /// @dev Yield delegation from `source` account to the `target` account is
    ///      suspended.
    /// @param source Address of the source suspending yield forwarding
    /// @param target Address of the target no longer receiving yield from `source`
    ///        account
    event YieldUndelegated(address source, address target);

    enum RebaseOptions {
        NotSet,
        StdNonRebasing,
        StdRebasing,
        YieldDelegationSource,
        YieldDelegationTarget
    }

    uint256[154] private _gap; // Slots to align with deployed contract
    uint256 private constant MAX_SUPPLY = type(uint128).max;
    /// @dev The amount of tokens in existence
    uint256 public totalSupply;
    mapping(address => mapping(address => uint256)) private allowances;
    /// @dev The vault with privileges to execute {mint}, {burn}
    ///     and {changeSupply}
    address public vaultAddress;
    mapping(address => uint256) internal creditBalances;
    // the 2 storage variables below need trailing underscores to not name collide with public functions
    uint256 private rebasingCredits_; // Sum of all rebasing credits (creditBalances for rebasing accounts)
    uint256 private rebasingCreditsPerToken_;
    /// @dev The amount of tokens that are not rebasing - receiving yield
    uint256 public nonRebasingSupply;
    mapping(address => uint256) internal alternativeCreditsPerToken;
    /// @dev A map of all addresses and their respective RebaseOptions
    mapping(address => RebaseOptions) public rebaseState;
    mapping(address => uint256) private __deprecated_isUpgraded;
    /// @dev A map of addresses that have yields forwarded to. This is an
    ///      inverse mapping of {yieldFrom}
    /// Key Account forwarding yield
    /// Value Account receiving yield
    mapping(address => address) public yieldTo;
    /// @dev A map of addresses that are receiving the yield. This is an
    ///      inverse mapping of {yieldTo}
    /// Key Account receiving yield
    /// Value Account forwarding yield
    mapping(address => address) public yieldFrom;

    uint256 private constant RESOLUTION_INCREASE = 1e9;
    uint256[34] private __gap; // including below gap totals up to 200

    /// @dev Initializes the contract and sets necessary variables.
    /// @param _vaultAddress Address of the vault contract
    /// @param _initialCreditsPerToken The starting rebasing credits per token.
    function initialize(address _vaultAddress, uint256 _initialCreditsPerToken)
        external
        onlyGovernor
    {
        require(_vaultAddress != address(0), "Zero vault address");
        require(vaultAddress == address(0), "Already initialized");

        rebasingCreditsPerToken_ = _initialCreditsPerToken;
        vaultAddress = _vaultAddress;
    }

    /// @dev Returns the symbol of the token, a shorter version
    ///      of the name.
    function symbol() external pure virtual returns (string memory) {
        return "OUSD";
    }

    /// @dev Returns the name of the token.
    function name() external pure virtual returns (string memory) {
        return "Origin Dollar";
    }

    /// @dev Returns the number of decimals used to get its user representation.
    function decimals() external pure virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev Verifies that the caller is the Vault contract
     */
    modifier onlyVault() {
        require(vaultAddress == msg.sender, "Caller is not the Vault");
        _;
    }

    /**
     * @return High resolution rebasingCreditsPerToken
     */
    function rebasingCreditsPerTokenHighres() external view returns (uint256) {
        return rebasingCreditsPerToken_;
    }

    /**
     * @return Low resolution rebasingCreditsPerToken
     */
    function rebasingCreditsPerToken() external view returns (uint256) {
        return rebasingCreditsPerToken_ / RESOLUTION_INCREASE;
    }

    /**
     * @return High resolution total number of rebasing credits
     */
    function rebasingCreditsHighres() external view returns (uint256) {
        return rebasingCredits_;
    }

    /**
     * @return Low resolution total number of rebasing credits
     */
    function rebasingCredits() external view returns (uint256) {
        return rebasingCredits_ / RESOLUTION_INCREASE;
    }

    /**
     * @notice Gets the balance of the specified address.
     * @param _account Address to query the balance of.
     * @return A uint256 representing the amount of base units owned by the
     *         specified address.
     */
    function balanceOf(address _account) public view returns (uint256) {
        RebaseOptions state = rebaseState[_account];
        if (state == RebaseOptions.YieldDelegationSource) {
            // Saves a slot read when transferring to or from a yield delegating source
            // since we know creditBalances equals the balance.
            return creditBalances[_account];
        }
        uint256 baseBalance = (creditBalances[_account] * 1e18) /
            _creditsPerToken(_account);
        if (state == RebaseOptions.YieldDelegationTarget) {
            // creditBalances of yieldFrom accounts equals token balances
            return baseBalance - creditBalances[yieldFrom[_account]];
        }
        return baseBalance;
    }

    /**
     * @notice Gets the credits balance of the specified address.
     * @dev Backwards compatible with old low res credits per token.
     * @param _account The address to query the balance of.
     * @return (uint256, uint256) Credit balance and credits per token of the
     *         address
     */
    function creditsBalanceOf(address _account)
        external
        view
        returns (uint256, uint256)
    {
        uint256 cpt = _creditsPerToken(_account);
        if (cpt == 1e27) {
            // For a period before the resolution upgrade, we created all new
            // contract accounts at high resolution. Since they are not changing
            // as a result of this upgrade, we will return their true values
            return (creditBalances[_account], cpt);
        } else {
            return (
                creditBalances[_account] / RESOLUTION_INCREASE,
                cpt / RESOLUTION_INCREASE
            );
        }
    }

    /**
     * @notice Gets the credits balance of the specified address.
     * @param _account The address to query the balance of.
     * @return (uint256, uint256, bool) Credit balance, credits per token of the
     *         address, and isUpgraded
     */
    function creditsBalanceOfHighres(address _account)
        external
        view
        returns (
            uint256,
            uint256,
            bool
        )
    {
        return (
            creditBalances[_account],
            _creditsPerToken(_account),
            true // all accounts have their resolution "upgraded"
        );
    }

    // Backwards compatible view
    function nonRebasingCreditsPerToken(address _account)
        external
        view
        returns (uint256)
    {
        return alternativeCreditsPerToken[_account];
    }

    /**
     * @notice Transfer tokens to a specified address.
     * @param _to the address to transfer to.
     * @param _value the amount to be transferred.
     * @return true on success.
     */
    function transfer(address _to, uint256 _value) external returns (bool) {
        require(_to != address(0), "Transfer to zero address");

        _executeTransfer(msg.sender, _to, _value);

        emit Transfer(msg.sender, _to, _value);
        return true;
    }

    /**
     * @notice Transfer tokens from one address to another.
     * @param _from The address you want to send tokens from.
     * @param _to The address you want to transfer to.
     * @param _value The amount of tokens to be transferred.
     * @return true on success.
     */
    function transferFrom(
        address _from,
        address _to,
        uint256 _value
    ) external returns (bool) {
        require(_to != address(0), "Transfer to zero address");
        uint256 userAllowance = allowances[_from][msg.sender];
        require(_value <= userAllowance, "Allowance exceeded");

        unchecked {
            allowances[_from][msg.sender] = userAllowance - _value;
        }

        _executeTransfer(_from, _to, _value);

        emit Transfer(_from, _to, _value);
        return true;
    }

    function _executeTransfer(
        address _from,
        address _to,
        uint256 _value
    ) internal {
        (
            int256 fromRebasingCreditsDiff,
            int256 fromNonRebasingSupplyDiff
        ) = _adjustAccount(_from, -_value.toInt256());
        (
            int256 toRebasingCreditsDiff,
            int256 toNonRebasingSupplyDiff
        ) = _adjustAccount(_to, _value.toInt256());

        _adjustGlobals(
            fromRebasingCreditsDiff + toRebasingCreditsDiff,
            fromNonRebasingSupplyDiff + toNonRebasingSupplyDiff
        );
    }

    function _adjustAccount(address _account, int256 _balanceChange)
        internal
        returns (int256 rebasingCreditsDiff, int256 nonRebasingSupplyDiff)
    {
        RebaseOptions state = rebaseState[_account];
        int256 currentBalance = balanceOf(_account).toInt256();
        if (currentBalance + _balanceChange < 0) {
            revert("Transfer amount exceeds balance");
        }
        uint256 newBalance = (currentBalance + _balanceChange).toUint256();

        if (state == RebaseOptions.YieldDelegationSource) {
            address target = yieldTo[_account];
            uint256 targetOldBalance = balanceOf(target);
            uint256 targetNewCredits = _balanceToRebasingCredits(
                targetOldBalance + newBalance
            );
            rebasingCreditsDiff =
                targetNewCredits.toInt256() -
                creditBalances[target].toInt256();

            creditBalances[_account] = newBalance;
            creditBalances[target] = targetNewCredits;
        } else if (state == RebaseOptions.YieldDelegationTarget) {
            uint256 newCredits = _balanceToRebasingCredits(
                newBalance + creditBalances[yieldFrom[_account]]
            );
            rebasingCreditsDiff =
                newCredits.toInt256() -
                creditBalances[_account].toInt256();
            creditBalances[_account] = newCredits;
        } else {
            _autoMigrate(_account);
            uint256 alternativeCreditsPerTokenMem = alternativeCreditsPerToken[
                _account
            ];
            if (alternativeCreditsPerTokenMem > 0) {
                nonRebasingSupplyDiff = _balanceChange;
                if (alternativeCreditsPerTokenMem != 1e18) {
                    alternativeCreditsPerToken[_account] = 1e18;
                }
                creditBalances[_account] = newBalance;
            } else {
                uint256 newCredits = _balanceToRebasingCredits(newBalance);
                rebasingCreditsDiff =
                    newCredits.toInt256() -
                    creditBalances[_account].toInt256();
                creditBalances[_account] = newCredits;
            }
        }
    }

    function _adjustGlobals(
        int256 _rebasingCreditsDiff,
        int256 _nonRebasingSupplyDiff
    ) internal {
        if (_rebasingCreditsDiff != 0) {
            rebasingCredits_ = (rebasingCredits_.toInt256() +
                _rebasingCreditsDiff).toUint256();
        }
        if (_nonRebasingSupplyDiff != 0) {
            nonRebasingSupply = (nonRebasingSupply.toInt256() +
                _nonRebasingSupplyDiff).toUint256();
        }
    }

    /**
     * @notice Function to check the amount of tokens that _owner has allowed
     *      to `_spender`.
     * @param _owner The address which owns the funds.
     * @param _spender The address which will spend the funds.
     * @return The number of tokens still available for the _spender.
     */
    function allowance(address _owner, address _spender)
        external
        view
        returns (uint256)
    {
        return allowances[_owner][_spender];
    }

    /**
     * @notice Approve the passed address to spend the specified amount of
     *      tokens on behalf of msg.sender.
     * @param _spender The address which will spend the funds.
     * @param _value The amount of tokens to be spent.
     * @return true on success.
     */
    function approve(address _spender, uint256 _value) external returns (bool) {
        allowances[msg.sender][_spender] = _value;
        emit Approval(msg.sender, _spender, _value);
        return true;
    }

    /**
     * @notice Creates `_amount` tokens and assigns them to `_account`,
     *     increasing the total supply.
     */
    function mint(address _account, uint256 _amount) external onlyVault {
        require(_account != address(0), "Mint to the zero address");

        // Account
        (
            int256 toRebasingCreditsDiff,
            int256 toNonRebasingSupplyDiff
        ) = _adjustAccount(_account, _amount.toInt256());
        // Globals
        _adjustGlobals(toRebasingCreditsDiff, toNonRebasingSupplyDiff);
        totalSupply = totalSupply + _amount;

        require(totalSupply < MAX_SUPPLY, "Max supply");
        emit Transfer(address(0), _account, _amount);
    }

    /**
     * @notice Destroys `_amount` tokens from `_account`,
     *     reducing the total supply.
     */
    function burn(address _account, uint256 _amount) external onlyVault {
        require(_account != address(0), "Burn from the zero address");
        if (_amount == 0) {
            return;
        }

        // Account
        (
            int256 toRebasingCreditsDiff,
            int256 toNonRebasingSupplyDiff
        ) = _adjustAccount(_account, -_amount.toInt256());
        // Globals
        _adjustGlobals(toRebasingCreditsDiff, toNonRebasingSupplyDiff);
        totalSupply = totalSupply - _amount;

        emit Transfer(_account, address(0), _amount);
    }

    /**
     * @dev Get the credits per token for an account. Returns a fixed amount
     *      if the account is non-rebasing.
     * @param _account Address of the account.
     */
    function _creditsPerToken(address _account)
        internal
        view
        returns (uint256)
    {
        uint256 alternativeCreditsPerTokenMem = alternativeCreditsPerToken[
            _account
        ];
        if (alternativeCreditsPerTokenMem != 0) {
            return alternativeCreditsPerTokenMem;
        } else {
            return rebasingCreditsPerToken_;
        }
    }

    /**
     * @dev Auto migrate contracts to be non rebasing,
     *     unless they have opted into yield.
     * @param _account Address of the account.
     */
    function _autoMigrate(address _account) internal {
        bool isContract = _account.code.length > 0;
        // In previous code versions, contracts would not have had their
        // rebaseState[_account] set to RebaseOptions.NonRebasing when migrated
        // therefore we check the actual accounting used on the account instead.
        if (
            isContract &&
            rebaseState[_account] == RebaseOptions.NotSet &&
            alternativeCreditsPerToken[_account] == 0
        ) {
            _rebaseOptOut(_account);
        }
    }

    /**
     * @dev Calculates credits from contract's global rebasingCreditsPerToken_, and
     *      also balance that corresponds to those credits. The latter is important
     *      when adjusting the contract's global nonRebasingSupply to circumvent any
     *      possible rounding errors.
     *
     * @param _balance Balance of the account.
     */
    function _balanceToRebasingCredits(uint256 _balance)
        internal
        view
        returns (uint256 rebasingCredits)
    {
        // Rounds up, because we need to ensure that accounts always have
        // at least the balance that they should have.
        // Note this should always be used on an absolute account value,
        // not on a possibly negative diff, because then the rounding would be wrong.
        return ((_balance) * rebasingCreditsPerToken_ + 1e18 - 1) / 1e18;
    }

    /**
     * @notice The calling account will start receiving yield after a successful call.
     * @param _account Address of the account.
     */
    function governanceRebaseOptIn(address _account) external onlyGovernor {
        require(_account != address(0), "Zero address not allowed");
        _rebaseOptIn(_account);
    }

    /**
     * @notice The calling account will start receiving yield after a successful call.
     */
    function rebaseOptIn() external {
        _rebaseOptIn(msg.sender);
    }

    function _rebaseOptIn(address _account) internal {
        uint256 balance = balanceOf(_account);

        // prettier-ignore
        require(
            alternativeCreditsPerToken[_account] > 0 ||
                // Accounts may explicitly `rebaseOptIn` regardless of
                // accounting if they have a 0 balance.
                creditBalances[_account] == 0
            ,
            "Account must be non-rebasing"
        );
        RebaseOptions state = rebaseState[_account];
        // prettier-ignore
        require(
            state == RebaseOptions.StdNonRebasing ||
                state == RebaseOptions.NotSet,
            "Only standard non-rebasing accounts can opt in"
        );

        uint256 newCredits = _balanceToRebasingCredits(balance);

        // Account
        rebaseState[_account] = RebaseOptions.StdRebasing;
        alternativeCreditsPerToken[_account] = 0;
        creditBalances[_account] = newCredits;
        // Globals
        _adjustGlobals(newCredits.toInt256(), -balance.toInt256());

        emit AccountRebasingEnabled(_account);
    }

    /**
     * @notice The calling account will no longer receive yield
     */
    function rebaseOptOut() external {
        _rebaseOptOut(msg.sender);
    }

    function _rebaseOptOut(address _account) internal {
        require(
            alternativeCreditsPerToken[_account] == 0,
            "Account must be rebasing"
        );
        RebaseOptions state = rebaseState[_account];
        require(
            state == RebaseOptions.StdRebasing || state == RebaseOptions.NotSet,
            "Only standard rebasing accounts can opt out"
        );

        uint256 oldCredits = creditBalances[_account];
        uint256 balance = balanceOf(_account);

        // Account
        rebaseState[_account] = RebaseOptions.StdNonRebasing;
        alternativeCreditsPerToken[_account] = 1e18;
        creditBalances[_account] = balance;
        // Globals
        _adjustGlobals(-oldCredits.toInt256(), balance.toInt256());

        emit AccountRebasingDisabled(_account);
    }

    /**
     * @notice Distribute yield to users. This changes the exchange rate
     *  between "credits" and OUSD tokens to change rebasing user's balances.
     * @param _newTotalSupply New total supply of OUSD.
     */
    function changeSupply(uint256 _newTotalSupply) external onlyVault {
        require(totalSupply > 0, "Cannot increase 0 supply");

        if (totalSupply == _newTotalSupply) {
            emit TotalSupplyUpdatedHighres(
                totalSupply,
                rebasingCredits_,
                rebasingCreditsPerToken_
            );
            return;
        }

        totalSupply = _newTotalSupply > MAX_SUPPLY
            ? MAX_SUPPLY
            : _newTotalSupply;

        uint256 rebasingSupply = totalSupply - nonRebasingSupply;
        // round up in the favour of the protocol
        rebasingCreditsPerToken_ =
            (rebasingCredits_ * 1e18 + rebasingSupply - 1) /
            rebasingSupply;

        require(rebasingCreditsPerToken_ > 0, "Invalid change in supply");

        emit TotalSupplyUpdatedHighres(
            totalSupply,
            rebasingCredits_,
            rebasingCreditsPerToken_
        );
    }

    /*
     * @notice Send the yield from one account to another account.
     *         Each account keeps its own balances.
     */
    function delegateYield(address _from, address _to) external onlyGovernor {
        require(_from != address(0), "Zero from address not allowed");
        require(_to != address(0), "Zero to address not allowed");

        require(_from != _to, "Cannot delegate to self");
        require(
            yieldFrom[_to] == address(0) &&
                yieldTo[_to] == address(0) &&
                yieldFrom[_from] == address(0) &&
                yieldTo[_from] == address(0),
            "Blocked by existing yield delegation"
        );
        RebaseOptions stateFrom = rebaseState[_from];
        RebaseOptions stateTo = rebaseState[_to];

        require(
            stateFrom == RebaseOptions.NotSet ||
                stateFrom == RebaseOptions.StdNonRebasing ||
                stateFrom == RebaseOptions.StdRebasing,
            "Invalid rebaseState from"
        );

        require(
            stateTo == RebaseOptions.NotSet ||
                stateTo == RebaseOptions.StdNonRebasing ||
                stateTo == RebaseOptions.StdRebasing,
            "Invalid rebaseState to"
        );

        if (alternativeCreditsPerToken[_from] == 0) {
            _rebaseOptOut(_from);
        }
        if (alternativeCreditsPerToken[_to] > 0) {
            _rebaseOptIn(_to);
        }

        uint256 fromBalance = balanceOf(_from);
        uint256 toBalance = balanceOf(_to);
        uint256 oldToCredits = creditBalances[_to];
        uint256 newToCredits = _balanceToRebasingCredits(
            fromBalance + toBalance
        );

        // Set up the bidirectional links
        yieldTo[_from] = _to;
        yieldFrom[_to] = _from;

        // Local
        rebaseState[_from] = RebaseOptions.YieldDelegationSource;
        alternativeCreditsPerToken[_from] = 1e18;
        creditBalances[_from] = fromBalance;
        rebaseState[_to] = RebaseOptions.YieldDelegationTarget;
        creditBalances[_to] = newToCredits;

        // Global
        int256 creditsChange = newToCredits.toInt256() -
            oldToCredits.toInt256();
        _adjustGlobals(creditsChange, -(fromBalance).toInt256());
        emit YieldDelegated(_from, _to);
    }

    /*
     * @notice Stop sending the yield from one account to another account.
     */
    function undelegateYield(address _from) external onlyGovernor {
        // Require a delegation, which will also ensure a valid delegation
        require(yieldTo[_from] != address(0), "Zero address not allowed");

        address to = yieldTo[_from];
        uint256 fromBalance = balanceOf(_from);
        uint256 toBalance = balanceOf(to);
        uint256 oldToCredits = creditBalances[to];
        uint256 newToCredits = _balanceToRebasingCredits(toBalance);

        // Remove the bidirectional links
        yieldFrom[to] = address(0);
        yieldTo[_from] = address(0);

        // Local
        rebaseState[_from] = RebaseOptions.StdNonRebasing;
        // alternativeCreditsPerToken[from] already 1e18 from `delegateYield()`
        creditBalances[_from] = fromBalance;
        rebaseState[to] = RebaseOptions.StdRebasing;
        // alternativeCreditsPerToken[to] already 0 from `delegateYield()`
        creditBalances[to] = newToCredits;

        // Global
        int256 creditsChange = newToCredits.toInt256() -
            oldToCredits.toInt256();
        _adjustGlobals(creditsChange, fromBalance.toInt256());
        emit YieldUndelegated(_from, to);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import { IBasicToken } from "../interfaces/IBasicToken.sol";

library Helpers {
    /**
     * @notice Fetch the `symbol()` from an ERC20 token
     * @dev Grabs the `symbol()` from a contract
     * @param _token Address of the ERC20 token
     * @return string Symbol of the ERC20 token
     */
    function getSymbol(address _token) internal view returns (string memory) {
        string memory symbol = IBasicToken(_token).symbol();
        return symbol;
    }

    /**
     * @notice Fetch the `decimals()` from an ERC20 token
     * @dev Grabs the `decimals()` from a contract and fails if
     *      the decimal value does not live within a certain range
     * @param _token Address of the ERC20 token
     * @return uint256 Decimals of the ERC20 token
     */
    function getDecimals(address _token) internal view returns (uint256) {
        uint256 decimals = IBasicToken(_token).decimals();
        require(
            decimals >= 4 && decimals <= 18,
            "Token must have sufficient decimal places"
        );

        return decimals;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @title Base contract any contracts that need to initialize state after deployment.
 * @author Origin Protocol Inc
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     */
    bool private initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private initializing;

    /**
     * @dev Modifier to protect an initializer function from being invoked twice.
     */
    modifier initializer() {
        require(
            initializing || !initialized,
            "Initializable: contract is already initialized"
        );

        bool isTopLevelCall = !initializing;
        if (isTopLevelCall) {
            initializing = true;
            initialized = true;
        }

        _;

        if (isTopLevelCall) {
            initializing = false;
        }
    }

    uint256[50] private ______gap;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @title OToken VaultStorage contract
 * @notice The VaultStorage contract defines the storage for the Vault contracts
 * @author Origin Protocol Inc
 */

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { Address } from "@openzeppelin/contracts/utils/Address.sol";

import { IStrategy } from "../interfaces/IStrategy.sol";
import { Governable } from "../governance/Governable.sol";
import { OUSD } from "../token/OUSD.sol";
import { Initializable } from "../utils/Initializable.sol";
import "../utils/Helpers.sol";

contract VaultStorage is Initializable, Governable {
    using SafeERC20 for IERC20;

    event AssetSupported(address _asset);
    event AssetRemoved(address _asset);
    event AssetDefaultStrategyUpdated(address _asset, address _strategy);
    event AssetAllocated(address _asset, address _strategy, uint256 _amount);
    event StrategyApproved(address _addr);
    event StrategyRemoved(address _addr);
    event Mint(address _addr, uint256 _value);
    event Redeem(address _addr, uint256 _value);
    event CapitalPaused();
    event CapitalUnpaused();
    event RebasePaused();
    event RebaseUnpaused();
    event VaultBufferUpdated(uint256 _vaultBuffer);
    event OusdMetaStrategyUpdated(address _ousdMetaStrategy);
    event RedeemFeeUpdated(uint256 _redeemFeeBps);
    event PriceProviderUpdated(address _priceProvider);
    event AllocateThresholdUpdated(uint256 _threshold);
    event RebaseThresholdUpdated(uint256 _threshold);
    event StrategistUpdated(address _address);
    event MaxSupplyDiffChanged(uint256 maxSupplyDiff);
    event YieldDistribution(address _to, uint256 _yield, uint256 _fee);
    event TrusteeFeeBpsChanged(uint256 _basis);
    event TrusteeAddressChanged(address _address);
    event NetOusdMintForStrategyThresholdChanged(uint256 _threshold);
    event SwapperChanged(address _address);
    event SwapAllowedUndervalueChanged(uint256 _basis);
    event SwapSlippageChanged(address _asset, uint256 _basis);
    event Swapped(
        address indexed _fromAsset,
        address indexed _toAsset,
        uint256 _fromAssetAmount,
        uint256 _toAssetAmount
    );
    event StrategyAddedToMintWhitelist(address indexed strategy);
    event StrategyRemovedFromMintWhitelist(address indexed strategy);
    event DripperChanged(address indexed _dripper);
    event WithdrawalRequested(
        address indexed _withdrawer,
        uint256 indexed _requestId,
        uint256 _amount,
        uint256 _queued
    );
    event WithdrawalClaimed(
        address indexed _withdrawer,
        uint256 indexed _requestId,
        uint256 _amount
    );
    event WithdrawalClaimable(uint256 _claimable, uint256 _newClaimable);
    event WithdrawalClaimDelayUpdated(uint256 _newDelay);

    // Assets supported by the Vault, i.e. Stablecoins
    enum UnitConversion {
        DECIMALS,
        GETEXCHANGERATE
    }
    // Changed to fit into a single storage slot so the decimals needs to be recached
    struct Asset {
        // Note: OETHVaultCore doesn't use `isSupported` when minting,
        // redeeming or checking balance of assets.
        bool isSupported;
        UnitConversion unitConversion;
        uint8 decimals;
        // Max allowed slippage from the Oracle price when swapping collateral assets in basis points.
        // For example 40 == 0.4% slippage
        uint16 allowedOracleSlippageBps;
    }

    /// @dev mapping of supported vault assets to their configuration
    // slither-disable-next-line uninitialized-state
    mapping(address => Asset) internal assets;
    /// @dev list of all assets supported by the vault.
    // slither-disable-next-line uninitialized-state
    address[] internal allAssets;

    // Strategies approved for use by the Vault
    struct Strategy {
        bool isSupported;
        uint256 _deprecated; // Deprecated storage slot
    }
    /// @dev mapping of strategy contracts to their configuration
    // slither-disable-next-line uninitialized-state
    mapping(address => Strategy) internal strategies;
    /// @dev list of all vault strategies
    address[] internal allStrategies;

    /// @notice Address of the Oracle price provider contract
    // slither-disable-next-line uninitialized-state
    address public priceProvider;
    /// @notice pause rebasing if true
    bool public rebasePaused = false;
    /// @notice pause operations that change the OToken supply.
    /// eg mint, redeem, allocate, mint/burn for strategy
    bool public capitalPaused = true;
    /// @notice Redemption fee in basis points. eg 50 = 0.5%
    uint256 public redeemFeeBps;
    /// @notice Percentage of assets to keep in Vault to handle (most) withdrawals. 100% = 1e18.
    uint256 public vaultBuffer;
    /// @notice OToken mints over this amount automatically allocate funds. 18 decimals.
    uint256 public autoAllocateThreshold;
    /// @notice OToken mints over this amount automatically rebase. 18 decimals.
    uint256 public rebaseThreshold;

    /// @dev Address of the OToken token. eg OUSD or OETH.
    // slither-disable-next-line uninitialized-state
    OUSD internal oUSD;

    /// @dev Storage slot for the address of the VaultAdmin contract that is delegated to
    // keccak256("OUSD.vault.governor.admin.impl");
    bytes32 constant adminImplPosition =
        0xa2bd3d3cf188a41358c8b401076eb59066b09dec5775650c0de4c55187d17bd9;

    /// @dev Address of the contract responsible for post rebase syncs with AMMs
    address private _deprecated_rebaseHooksAddr = address(0);

    /// @dev Deprecated: Address of Uniswap
    // slither-disable-next-line constable-states
    address private _deprecated_uniswapAddr = address(0);

    /// @notice Address of the Strategist
    address public strategistAddr = address(0);

    /// @notice Mapping of asset address to the Strategy that they should automatically
    // be allocated to
    // slither-disable-next-line uninitialized-state
    mapping(address => address) public assetDefaultStrategies;

    /// @notice Max difference between total supply and total value of assets. 18 decimals.
    // slither-disable-next-line uninitialized-state
    uint256 public maxSupplyDiff;

    /// @notice Trustee contract that can collect a percentage of yield
    address public trusteeAddress;

    /// @notice Amount of yield collected in basis points. eg 2000 = 20%
    uint256 public trusteeFeeBps;

    /// @dev Deprecated: Tokens that should be swapped for stablecoins
    address[] private _deprecated_swapTokens;

    uint256 constant MINT_MINIMUM_UNIT_PRICE = 0.998e18;

    /// @notice Metapool strategy that is allowed to mint/burn OTokens without changing collateral

    // slither-disable-start constable-states
    // slither-disable-next-line uninitialized-state
    address public ousdMetaStrategy;

    /// @notice How much OTokens are currently minted by the strategy
    // slither-disable-next-line uninitialized-state
    int256 public netOusdMintedForStrategy;

    /// @notice How much net total OTokens are allowed to be minted by all strategies
    // slither-disable-next-line uninitialized-state
    uint256 public netOusdMintForStrategyThreshold;

    // slither-disable-end constable-states

    uint256 constant MIN_UNIT_PRICE_DRIFT = 0.7e18;
    uint256 constant MAX_UNIT_PRICE_DRIFT = 1.3e18;

    /// @notice Collateral swap configuration.
    /// @dev is packed into a single storage slot to save gas.
    struct SwapConfig {
        // Contract that swaps the vault's collateral assets
        address swapper;
        // Max allowed percentage the total value can drop below the total supply in basis points.
        // For example 100 == 1%
        uint16 allowedUndervalueBps;
    }
    SwapConfig internal swapConfig = SwapConfig(address(0), 0);

    // List of strategies that can mint oTokens directly
    // Used in OETHBaseVaultCore
    // slither-disable-next-line uninitialized-state
    mapping(address => bool) public isMintWhitelistedStrategy;

    /// @notice Address of the Dripper contract that streams harvested rewards to the Vault
    /// @dev The vault is proxied so needs to be set with setDripper against the proxy contract.
    // slither-disable-start constable-states
    // slither-disable-next-line uninitialized-state
    address public dripper;
    // slither-disable-end constable-states

    /// Withdrawal Queue Storage /////

    struct WithdrawalQueueMetadata {
        // cumulative total of all withdrawal requests included the ones that have already been claimed
        uint128 queued;
        // cumulative total of all the requests that can be claimed including the ones that have already been claimed
        uint128 claimable;
        // total of all the requests that have been claimed
        uint128 claimed;
        // index of the next withdrawal request starting at 0
        uint128 nextWithdrawalIndex;
    }

    /// @notice Global metadata for the withdrawal queue including:
    /// queued - cumulative total of all withdrawal requests included the ones that have already been claimed
    /// claimable - cumulative total of all the requests that can be claimed including the ones already claimed
    /// claimed - total of all the requests that have been claimed
    /// nextWithdrawalIndex - index of the next withdrawal request starting at 0
    // slither-disable-next-line uninitialized-state
    WithdrawalQueueMetadata public withdrawalQueueMetadata;

    struct WithdrawalRequest {
        address withdrawer;
        bool claimed;
        uint40 timestamp; // timestamp of the withdrawal request
        // Amount of oTokens to redeem. eg OETH
        uint128 amount;
        // cumulative total of all withdrawal requests including this one.
        // this request can be claimed when this queued amount is less than or equal to the queue's claimable amount.
        uint128 queued;
    }

    /// @notice Mapping of withdrawal request indices to the user withdrawal request data
    mapping(uint256 => WithdrawalRequest) public withdrawalRequests;

    /// @notice Sets a minimum delay that is required to elapse between
    ///     requesting async withdrawals and claiming the request.
    ///     When set to 0 async withdrawals are disabled.
    // slither-disable-start constable-states
    // slither-disable-next-line uninitialized-state
    uint256 public withdrawalClaimDelay;
    // slither-disable-end constable-states

    // For future use
    uint256[44] private __gap;

    /**
     * @notice set the implementation for the admin, this needs to be in a base class else we cannot set it
     * @param newImpl address of the implementation
     */
    function setAdminImpl(address newImpl) external onlyGovernor {
        require(
            Address.isContract(newImpl),
            "new implementation is not a contract"
        );
        bytes32 position = adminImplPosition;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(position, newImpl)
        }
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "evmVersion": "paris",
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_vault","type":"address"},{"internalType":"address","name":"_token","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint192","name":"oldDripRate","type":"uint192"},{"indexed":false,"internalType":"uint192","name":"newDripRate","type":"uint192"}],"name":"DripRateUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousGovernor","type":"address"},{"indexed":true,"internalType":"address","name":"newGovernor","type":"address"}],"name":"GovernorshipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousGovernor","type":"address"},{"indexed":true,"internalType":"address","name":"newGovernor","type":"address"}],"name":"PendingGovernorshipTransfer","type":"event"},{"inputs":[],"name":"availableFunds","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"claimGovernance","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"collect","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"collectAndRebase","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"drip","outputs":[{"internalType":"uint64","name":"lastCollect","type":"uint64"},{"internalType":"uint192","name":"perSecond","type":"uint192"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"dripDuration","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"governor","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"isGovernor","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"setDripDuration","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint192","name":"_perSecond","type":"uint192"}],"name":"setDripRate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_newGovernor","type":"address"}],"name":"transferGovernance","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_asset","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"transferToken","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

000000000000000000000000a3c0eca00d2b76b4d1f170b0ab3fdea16c180186000000000000000000000000039e2fb66102314ce7b64ce5ce3e5183bc94ad38

-----Decoded View---------------
Arg [0] : _vault (address): 0xa3c0eCA00D2B76b4d1F170b0AB3FdeA16C180186
Arg [1] : _token (address): 0x039e2fB66102314Ce7b64Ce5Ce3E5183bc94aD38

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 000000000000000000000000a3c0eca00d2b76b4d1f170b0ab3fdea16c180186
Arg [1] : 000000000000000000000000039e2fb66102314ce7b64ce5ce3e5183bc94ad38