Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.21;

import {FixedPointMathLib} from "@solmate/utils/FixedPointMathLib.sol";
import {IRateProvider} from "src/interfaces/IRateProvider.sol";
import {ERC20} from "@solmate/tokens/ERC20.sol";
import {SafeTransferLib} from "@solmate/utils/SafeTransferLib.sol";
import {BoringVault} from "src/base/BoringVault.sol";
import {Auth, Authority} from "@solmate/auth/Auth.sol";
import {IPausable} from "src/interfaces/IPausable.sol";
import {AccountantWithRateProviders} from "src/base/Roles/AccountantWithRateProviders.sol";

contract AccountantWithFixedRate is AccountantWithRateProviders {
    using FixedPointMathLib for uint256;
    using SafeTransferLib for ERC20;

    // ========================================= STRUCTS =========================================

    /**
     * @notice State for the fixed rate accountant.
     * @param yieldEarnedInBase The yield earned in base.
     * @param yieldDistributor The address of the yield distributor.
     */
    struct FixedRateAccountantState {
        uint96 yieldEarnedInBase;
        address yieldDistributor;
    }

    // ========================================= STATE =========================================

    /**
     * @notice State for the fixed rate accountant.
     */
    FixedRateAccountantState public fixedRateAccountantState;

    //============================== ERRORS ===============================

    error AccountantWithFixedRate__HighWaterMarkCannotChange();
    error AccountantWithFixedRate__StartingExchangeRateCannotBeGreaterThanFixed();
    error AccountantWithFixedRate__UnsafeUint96Cast();
    error AccountantWithFixedRate__OnlyCallableByYieldDistributor();
    error AccountantWithFixedRate__ZeroYieldOwed();

    //============================== EVENTS ===============================

    event YieldClaimed(address indexed yieldAsset, uint256 amount);
    event YieldDistributorUpdated(address indexed yieldDistributor);

    //============================== IMMUTABLES ===============================

    /**
     * @notice The fixed exchange rate.
     */
    uint96 internal immutable fixedExchangeRate;

    constructor(
        address _owner,
        address _vault,
        address payoutAddress,
        uint96 startingExchangeRate,
        address _base,
        uint16 allowedExchangeRateChangeUpper,
        uint16 allowedExchangeRateChangeLower,
        uint24 minimumUpdateDelayInSeconds,
        uint16 platformFee,
        uint16 performanceFee
    )
        AccountantWithRateProviders(
            _owner,
            _vault,
            payoutAddress,
            startingExchangeRate,
            _base,
            allowedExchangeRateChangeUpper,
            allowedExchangeRateChangeLower,
            minimumUpdateDelayInSeconds,
            platformFee,
            performanceFee
        )
    {
        fixedExchangeRate = uint96(10 ** decimals);
        if (startingExchangeRate > fixedExchangeRate) {
            revert AccountantWithFixedRate__StartingExchangeRateCannotBeGreaterThanFixed();
        }
    }

    // ========================================= ADMIN FUNCTIONS =========================================

    /**
     * @notice Set the yield distributor.
     */
    function setYieldDistributor(address yieldDistributor) external requiresAuth {
        fixedRateAccountantState.yieldDistributor = yieldDistributor;
        emit YieldDistributorUpdated(yieldDistributor);
    }

    /**
     * @notice Reset the highwater mark.
     * @dev This function is overridden to prevent it from being called.
     */
    function resetHighwaterMark() external view override requiresAuth {
        revert AccountantWithFixedRate__HighWaterMarkCannotChange();
    }

    // ========================================= CLAIM YIELD FUNCTION =========================================

    /**
     * @notice Claim yield owed to the yield distributor.
     * @dev Callable by the yield distributor.
     */
    function claimYield(ERC20 yieldAsset) external {
        FixedRateAccountantState storage frState = fixedRateAccountantState;
        if (msg.sender != frState.yieldDistributor) revert AccountantWithFixedRate__OnlyCallableByYieldDistributor();

        AccountantState storage state = accountantState;
        if (state.isPaused) revert AccountantWithRateProviders__Paused();
        if (frState.yieldEarnedInBase == 0) revert AccountantWithFixedRate__ZeroYieldOwed();

        // Determine amount of yield earned in yieldAsset.
        uint256 yieldOwedInYieldAsset;
        RateProviderData memory data = rateProviderData[yieldAsset];
        if (address(yieldAsset) == address(base)) {
            yieldOwedInYieldAsset = frState.yieldEarnedInBase;
        } else {
            uint8 yieldAssetDecimals = ERC20(yieldAsset).decimals();
            uint256 feesOwedInBaseUsingYieldAssetDecimals =
                _changeDecimals(frState.yieldEarnedInBase, decimals, yieldAssetDecimals);
            if (data.isPeggedToBase) {
                yieldOwedInYieldAsset = feesOwedInBaseUsingYieldAssetDecimals;
            } else {
                uint256 rate = data.rateProvider.getRate();
                yieldOwedInYieldAsset = feesOwedInBaseUsingYieldAssetDecimals.mulDivDown(10 ** yieldAssetDecimals, rate);
            }
        }
        // Zero out yield earned.
        frState.yieldEarnedInBase = 0;
        // Transfer fee asset to payout address.
        yieldAsset.safeTransferFrom(address(vault), frState.yieldDistributor, yieldOwedInYieldAsset);

        emit YieldClaimed(address(yieldAsset), yieldOwedInYieldAsset);
    }

    // ========================================= VIEW FUNCTIONS =========================================

    /**
     * @notice Preview the result of an update to the exchange rate.
     * @return updateWillPause Whether the update will pause the contract.
     * @return newFeesOwedInBase The new fees owed in base.
     * @return totalFeesOwedInBase The total fees owed in base.
     */
    function previewUpdateExchangeRate(uint96 newExchangeRate)
        external
        view
        override
        returns (bool updateWillPause, uint256 newFeesOwedInBase, uint256 totalFeesOwedInBase)
    {
        (
            bool shouldPause,
            AccountantState storage state,
            uint64 currentTime,
            uint256 currentExchangeRate,
            uint256 currentTotalShares
        ) = _beforeUpdateExchangeRate(newExchangeRate);
        updateWillPause = shouldPause;
        totalFeesOwedInBase = state.feesOwedInBase;
        if (!shouldPause) {
            if (newExchangeRate > fixedExchangeRate) {
                (uint256 platformFeesOwedInBase, uint256 shareSupplyToUse) = _calculatePlatformFee(
                    state.totalSharesLastUpdate,
                    state.lastUpdateTimestamp,
                    state.platformFee,
                    newExchangeRate,
                    currentExchangeRate,
                    currentTotalShares,
                    currentTime
                );

                (uint256 performanceFeesOwedInBase, uint256 yieldEarned) =
                    _calculatePerformanceFee(newExchangeRate, shareSupplyToUse, fixedExchangeRate, state.performanceFee);
                if (yieldEarned < (platformFeesOwedInBase + performanceFeesOwedInBase)) {
                    // This means that the platform fee + performance fee is greater than or equal to the exchange rate appreciation,
                    // so the platform fee is forfeited, but yield and performance fees are still calculated.
                    newFeesOwedInBase = performanceFeesOwedInBase;
                } else {
                    newFeesOwedInBase = platformFeesOwedInBase + performanceFeesOwedInBase;
                }
                totalFeesOwedInBase += newFeesOwedInBase;
            }
        }
    }

    // ========================================= INTERNAL HELPER FUNCTIONS =========================================

    /**
     * @notice Override set exchange rate logic to ensure it never exceeds the fixed rate,
     *         but it is allowed to be less than or equal to the fixed rate.
     */
    function _setExchangeRate(uint96 newExchangeRate, AccountantState storage state)
        internal
        override
        returns (uint96)
    {
        if (newExchangeRate < fixedExchangeRate) {
            state.exchangeRate = newExchangeRate;
        } else {
            state.exchangeRate = fixedExchangeRate;
            newExchangeRate = fixedExchangeRate;
        }
        return newExchangeRate;
    }

    /**
     * @notice Calculate fees owed in base.
     * @dev We only update fees and yield earned if we are above the fixed rate.
     *      Because if we are below the fixed rate there is no yield, and no fees should
     *      be taken as the focus is on getting the rate back to the fixed rate.
     * @dev If the platform fee + performance fee is greater than or equal to the exchange rate appreciation,
     *      then the platform fee is forfeited, but yield and performance fees are still calculated.
     */
    function _calculateFeesOwed(
        AccountantState storage state,
        uint96 newExchangeRate,
        uint256 currentExchangeRate,
        uint256 currentTotalShares,
        uint64 currentTime
    ) internal override {
        // Only update fees if we are above the fixed rate.
        if (newExchangeRate > fixedExchangeRate) {
            // Account for platform fees.
            (uint256 platformFeesOwedInBase, uint256 shareSupplyToUse) = _calculatePlatformFee(
                state.totalSharesLastUpdate,
                state.lastUpdateTimestamp,
                state.platformFee,
                newExchangeRate,
                currentExchangeRate,
                currentTotalShares,
                currentTime
            );

            // Account for performance fees.
            (uint256 performanceFeesOwedInBase, uint256 yieldEarned) =
                _calculatePerformanceFee(newExchangeRate, shareSupplyToUse, fixedExchangeRate, state.performanceFee);

            uint256 feesOwedInBase;
            if (yieldEarned < (platformFeesOwedInBase + performanceFeesOwedInBase)) {
                // This means that the platform fee + performance fee is greater than or equal to the exchange rate appreciation,
                // so the platform fee is forfeited, but yield and performance fees are still calculated.
                feesOwedInBase = performanceFeesOwedInBase;
            } else {
                feesOwedInBase = platformFeesOwedInBase + performanceFeesOwedInBase;
            }
            // Since performance fees are a percentage of yield earned, we know this will never underflow.
            yieldEarned -= feesOwedInBase;

            // We intentionally do not update highwater mark since this is a fixed rate accountant.
            // state.highwaterMark = newExchangeRate;

            // Add yield earned to fixed rate accountant state.
            if (yieldEarned > type(uint96).max) {
                revert AccountantWithFixedRate__UnsafeUint96Cast();
            }
            fixedRateAccountantState.yieldEarnedInBase += uint96(yieldEarned);
            state.feesOwedInBase += uint128(feesOwedInBase);
        }
    }
}

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;

/// @notice Arithmetic library with operations for fixed-point numbers.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/FixedPointMathLib.sol)
/// @author Inspired by USM (https://github.com/usmfum/USM/blob/master/contracts/WadMath.sol)
library FixedPointMathLib {
    /*//////////////////////////////////////////////////////////////
                    SIMPLIFIED FIXED POINT OPERATIONS
    //////////////////////////////////////////////////////////////*/

    uint256 internal constant MAX_UINT256 = 2**256 - 1;

    uint256 internal constant WAD = 1e18; // The scalar of ETH and most ERC20s.

    function mulWadDown(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivDown(x, y, WAD); // Equivalent to (x * y) / WAD rounded down.
    }

    function mulWadUp(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivUp(x, y, WAD); // Equivalent to (x * y) / WAD rounded up.
    }

    function divWadDown(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivDown(x, WAD, y); // Equivalent to (x * WAD) / y rounded down.
    }

    function divWadUp(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivUp(x, WAD, y); // Equivalent to (x * WAD) / y rounded up.
    }

    /*//////////////////////////////////////////////////////////////
                    LOW LEVEL FIXED POINT OPERATIONS
    //////////////////////////////////////////////////////////////*/

    function mulDivDown(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            // Equivalent to require(denominator != 0 && (y == 0 || x <= type(uint256).max / y))
            if iszero(mul(denominator, iszero(mul(y, gt(x, div(MAX_UINT256, y)))))) {
                revert(0, 0)
            }

            // Divide x * y by the denominator.
            z := div(mul(x, y), denominator)
        }
    }

    function mulDivUp(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            // Equivalent to require(denominator != 0 && (y == 0 || x <= type(uint256).max / y))
            if iszero(mul(denominator, iszero(mul(y, gt(x, div(MAX_UINT256, y)))))) {
                revert(0, 0)
            }

            // If x * y modulo the denominator is strictly greater than 0,
            // 1 is added to round up the division of x * y by the denominator.
            z := add(gt(mod(mul(x, y), denominator), 0), div(mul(x, y), denominator))
        }
    }

    function rpow(
        uint256 x,
        uint256 n,
        uint256 scalar
    ) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            switch x
            case 0 {
                switch n
                case 0 {
                    // 0 ** 0 = 1
                    z := scalar
                }
                default {
                    // 0 ** n = 0
                    z := 0
                }
            }
            default {
                switch mod(n, 2)
                case 0 {
                    // If n is even, store scalar in z for now.
                    z := scalar
                }
                default {
                    // If n is odd, store x in z for now.
                    z := x
                }

                // Shifting right by 1 is like dividing by 2.
                let half := shr(1, scalar)

                for {
                    // Shift n right by 1 before looping to halve it.
                    n := shr(1, n)
                } n {
                    // Shift n right by 1 each iteration to halve it.
                    n := shr(1, n)
                } {
                    // Revert immediately if x ** 2 would overflow.
                    // Equivalent to iszero(eq(div(xx, x), x)) here.
                    if shr(128, x) {
                        revert(0, 0)
                    }

                    // Store x squared.
                    let xx := mul(x, x)

                    // Round to the nearest number.
                    let xxRound := add(xx, half)

                    // Revert if xx + half overflowed.
                    if lt(xxRound, xx) {
                        revert(0, 0)
                    }

                    // Set x to scaled xxRound.
                    x := div(xxRound, scalar)

                    // If n is even:
                    if mod(n, 2) {
                        // Compute z * x.
                        let zx := mul(z, x)

                        // If z * x overflowed:
                        if iszero(eq(div(zx, x), z)) {
                            // Revert if x is non-zero.
                            if iszero(iszero(x)) {
                                revert(0, 0)
                            }
                        }

                        // Round to the nearest number.
                        let zxRound := add(zx, half)

                        // Revert if zx + half overflowed.
                        if lt(zxRound, zx) {
                            revert(0, 0)
                        }

                        // Return properly scaled zxRound.
                        z := div(zxRound, scalar)
                    }
                }
            }
        }
    }

    /*//////////////////////////////////////////////////////////////
                        GENERAL NUMBER UTILITIES
    //////////////////////////////////////////////////////////////*/

    function sqrt(uint256 x) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            let y := x // We start y at x, which will help us make our initial estimate.

            z := 181 // The "correct" value is 1, but this saves a multiplication later.

            // This segment is to get a reasonable initial estimate for the Babylonian method. With a bad
            // start, the correct # of bits increases ~linearly each iteration instead of ~quadratically.

            // We check y >= 2^(k + 8) but shift right by k bits
            // each branch to ensure that if x >= 256, then y >= 256.
            if iszero(lt(y, 0x10000000000000000000000000000000000)) {
                y := shr(128, y)
                z := shl(64, z)
            }
            if iszero(lt(y, 0x1000000000000000000)) {
                y := shr(64, y)
                z := shl(32, z)
            }
            if iszero(lt(y, 0x10000000000)) {
                y := shr(32, y)
                z := shl(16, z)
            }
            if iszero(lt(y, 0x1000000)) {
                y := shr(16, y)
                z := shl(8, z)
            }

            // Goal was to get z*z*y within a small factor of x. More iterations could
            // get y in a tighter range. Currently, we will have y in [256, 256*2^16).
            // We ensured y >= 256 so that the relative difference between y and y+1 is small.
            // That's not possible if x < 256 but we can just verify those cases exhaustively.

            // Now, z*z*y <= x < z*z*(y+1), and y <= 2^(16+8), and either y >= 256, or x < 256.
            // Correctness can be checked exhaustively for x < 256, so we assume y >= 256.
            // Then z*sqrt(y) is within sqrt(257)/sqrt(256) of sqrt(x), or about 20bps.

            // For s in the range [1/256, 256], the estimate f(s) = (181/1024) * (s+1) is in the range
            // (1/2.84 * sqrt(s), 2.84 * sqrt(s)), with largest error when s = 1 and when s = 256 or 1/256.

            // Since y is in [256, 256*2^16), let a = y/65536, so that a is in [1/256, 256). Then we can estimate
            // sqrt(y) using sqrt(65536) * 181/1024 * (a + 1) = 181/4 * (y + 65536)/65536 = 181 * (y + 65536)/2^18.

            // There is no overflow risk here since y < 2^136 after the first branch above.
            z := shr(18, mul(z, add(y, 65536))) // A mul() is saved from starting z at 181.

            // Given the worst case multiplicative error of 2.84 above, 7 iterations should be enough.
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))

            // If x+1 is a perfect square, the Babylonian method cycles between
            // floor(sqrt(x)) and ceil(sqrt(x)). This statement ensures we return floor.
            // See: https://en.wikipedia.org/wiki/Integer_square_root#Using_only_integer_division
            // Since the ceil is rare, we save gas on the assignment and repeat division in the rare case.
            // If you don't care whether the floor or ceil square root is returned, you can remove this statement.
            z := sub(z, lt(div(x, z), z))
        }
    }

    function unsafeMod(uint256 x, uint256 y) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            // Mod x by y. Note this will return
            // 0 instead of reverting if y is zero.
            z := mod(x, y)
        }
    }

    function unsafeDiv(uint256 x, uint256 y) internal pure returns (uint256 r) {
        /// @solidity memory-safe-assembly
        assembly {
            // Divide x by y. Note this will return
            // 0 instead of reverting if y is zero.
            r := div(x, y)
        }
    }

    function unsafeDivUp(uint256 x, uint256 y) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            // Add 1 to x * y if x % y > 0. Note this will
            // return 0 instead of reverting if y is zero.
            z := add(gt(mod(x, y), 0), div(x, y))
        }
    }
}

// SPDX-License-Identifier: UNLICENSED
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.8.0;

interface IRateProvider {
    function getRate() external view returns (uint256);
}

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;

/// @notice Modern and gas efficient ERC20 + EIP-2612 implementation.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/tokens/ERC20.sol)
/// @author Modified from Uniswap (https://github.com/Uniswap/uniswap-v2-core/blob/master/contracts/UniswapV2ERC20.sol)
/// @dev Do not manually set balances without updating totalSupply, as the sum of all user balances must not exceed it.
abstract contract ERC20 {
    /*//////////////////////////////////////////////////////////////
                                 EVENTS
    //////////////////////////////////////////////////////////////*/

    event Transfer(address indexed from, address indexed to, uint256 amount);

    event Approval(address indexed owner, address indexed spender, uint256 amount);

    /*//////////////////////////////////////////////////////////////
                            METADATA STORAGE
    //////////////////////////////////////////////////////////////*/

    string public name;

    string public symbol;

    uint8 public immutable decimals;

    /*//////////////////////////////////////////////////////////////
                              ERC20 STORAGE
    //////////////////////////////////////////////////////////////*/

    uint256 public totalSupply;

    mapping(address => uint256) public balanceOf;

    mapping(address => mapping(address => uint256)) public allowance;

    /*//////////////////////////////////////////////////////////////
                            EIP-2612 STORAGE
    //////////////////////////////////////////////////////////////*/

    uint256 internal immutable INITIAL_CHAIN_ID;

    bytes32 internal immutable INITIAL_DOMAIN_SEPARATOR;

    mapping(address => uint256) public nonces;

    /*//////////////////////////////////////////////////////////////
                               CONSTRUCTOR
    //////////////////////////////////////////////////////////////*/

    constructor(
        string memory _name,
        string memory _symbol,
        uint8 _decimals
    ) {
        name = _name;
        symbol = _symbol;
        decimals = _decimals;

        INITIAL_CHAIN_ID = block.chainid;
        INITIAL_DOMAIN_SEPARATOR = computeDomainSeparator();
    }

    /*//////////////////////////////////////////////////////////////
                               ERC20 LOGIC
    //////////////////////////////////////////////////////////////*/

    function approve(address spender, uint256 amount) public virtual returns (bool) {
        allowance[msg.sender][spender] = amount;

        emit Approval(msg.sender, spender, amount);

        return true;
    }

    function transfer(address to, uint256 amount) public virtual returns (bool) {
        balanceOf[msg.sender] -= amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(msg.sender, to, amount);

        return true;
    }

    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual returns (bool) {
        uint256 allowed = allowance[from][msg.sender]; // Saves gas for limited approvals.

        if (allowed != type(uint256).max) allowance[from][msg.sender] = allowed - amount;

        balanceOf[from] -= amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(from, to, amount);

        return true;
    }

    /*//////////////////////////////////////////////////////////////
                             EIP-2612 LOGIC
    //////////////////////////////////////////////////////////////*/

    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        require(deadline >= block.timestamp, "PERMIT_DEADLINE_EXPIRED");

        // Unchecked because the only math done is incrementing
        // the owner's nonce which cannot realistically overflow.
        unchecked {
            address recoveredAddress = ecrecover(
                keccak256(
                    abi.encodePacked(
                        "\x19\x01",
                        DOMAIN_SEPARATOR(),
                        keccak256(
                            abi.encode(
                                keccak256(
                                    "Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)"
                                ),
                                owner,
                                spender,
                                value,
                                nonces[owner]++,
                                deadline
                            )
                        )
                    )
                ),
                v,
                r,
                s
            );

            require(recoveredAddress != address(0) && recoveredAddress == owner, "INVALID_SIGNER");

            allowance[recoveredAddress][spender] = value;
        }

        emit Approval(owner, spender, value);
    }

    function DOMAIN_SEPARATOR() public view virtual returns (bytes32) {
        return block.chainid == INITIAL_CHAIN_ID ? INITIAL_DOMAIN_SEPARATOR : computeDomainSeparator();
    }

    function computeDomainSeparator() internal view virtual returns (bytes32) {
        return
            keccak256(
                abi.encode(
                    keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"),
                    keccak256(bytes(name)),
                    keccak256("1"),
                    block.chainid,
                    address(this)
                )
            );
    }

    /*//////////////////////////////////////////////////////////////
                        INTERNAL MINT/BURN LOGIC
    //////////////////////////////////////////////////////////////*/

    function _mint(address to, uint256 amount) internal virtual {
        totalSupply += amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(address(0), to, amount);
    }

    function _burn(address from, uint256 amount) internal virtual {
        balanceOf[from] -= amount;

        // Cannot underflow because a user's balance
        // will never be larger than the total supply.
        unchecked {
            totalSupply -= amount;
        }

        emit Transfer(from, address(0), amount);
    }
}

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;

import {ERC20} from "../tokens/ERC20.sol";

/// @notice Safe ETH and ERC20 transfer library that gracefully handles missing return values.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/SafeTransferLib.sol)
/// @dev Use with caution! Some functions in this library knowingly create dirty bits at the destination of the free memory pointer.
/// @dev Note that none of the functions in this library check that a token has code at all! That responsibility is delegated to the caller.
library SafeTransferLib {
    /*//////////////////////////////////////////////////////////////
                             ETH OPERATIONS
    //////////////////////////////////////////////////////////////*/

    function safeTransferETH(address to, uint256 amount) internal {
        bool success;

        /// @solidity memory-safe-assembly
        assembly {
            // Transfer the ETH and store if it succeeded or not.
            success := call(gas(), to, amount, 0, 0, 0, 0)
        }

        require(success, "ETH_TRANSFER_FAILED");
    }

    /*//////////////////////////////////////////////////////////////
                            ERC20 OPERATIONS
    //////////////////////////////////////////////////////////////*/

    function safeTransferFrom(
        ERC20 token,
        address from,
        address to,
        uint256 amount
    ) internal {
        bool success;

        /// @solidity memory-safe-assembly
        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)

            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0x23b872dd00000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), and(from, 0xffffffffffffffffffffffffffffffffffffffff)) // Append and mask the "from" argument.
            mstore(add(freeMemoryPointer, 36), and(to, 0xffffffffffffffffffffffffffffffffffffffff)) // Append and mask the "to" argument.
            mstore(add(freeMemoryPointer, 68), amount) // Append the "amount" argument. Masking not required as it's a full 32 byte type.

            success := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 100 because the length of our calldata totals up like so: 4 + 32 * 3.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token, 0, freeMemoryPointer, 100, 0, 32)
            )
        }

        require(success, "TRANSFER_FROM_FAILED");
    }

    function safeTransfer(
        ERC20 token,
        address to,
        uint256 amount
    ) internal {
        bool success;

        /// @solidity memory-safe-assembly
        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)

            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0xa9059cbb00000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), and(to, 0xffffffffffffffffffffffffffffffffffffffff)) // Append and mask the "to" argument.
            mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument. Masking not required as it's a full 32 byte type.

            success := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
            )
        }

        require(success, "TRANSFER_FAILED");
    }

    function safeApprove(
        ERC20 token,
        address to,
        uint256 amount
    ) internal {
        bool success;

        /// @solidity memory-safe-assembly
        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)

            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0x095ea7b300000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), and(to, 0xffffffffffffffffffffffffffffffffffffffff)) // Append and mask the "to" argument.
            mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument. Masking not required as it's a full 32 byte type.

            success := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
            )
        }

        require(success, "APPROVE_FAILED");
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.21;

import {Address} from "@openzeppelin/contracts/utils/Address.sol";
import {ERC721Holder} from "@openzeppelin/contracts/token/ERC721/utils/ERC721Holder.sol";
import {ERC1155Holder} from "@openzeppelin/contracts/token/ERC1155/utils/ERC1155Holder.sol";
import {FixedPointMathLib} from "@solmate/utils/FixedPointMathLib.sol";
import {SafeTransferLib} from "@solmate/utils/SafeTransferLib.sol";
import {ERC20} from "@solmate/tokens/ERC20.sol";
import {BeforeTransferHook} from "src/interfaces/BeforeTransferHook.sol";
import {Auth, Authority} from "@solmate/auth/Auth.sol";

contract BoringVault is ERC20, Auth, ERC721Holder, ERC1155Holder {
    using Address for address;
    using SafeTransferLib for ERC20;
    using FixedPointMathLib for uint256;

    // ========================================= STATE =========================================

    /**
     * @notice Contract responsbile for implementing `beforeTransfer`.
     */
    BeforeTransferHook public hook;

    //============================== EVENTS ===============================

    event Enter(address indexed from, address indexed asset, uint256 amount, address indexed to, uint256 shares);
    event Exit(address indexed to, address indexed asset, uint256 amount, address indexed from, uint256 shares);

    //============================== CONSTRUCTOR ===============================

    constructor(address _owner, string memory _name, string memory _symbol, uint8 _decimals)
        ERC20(_name, _symbol, _decimals)
        Auth(_owner, Authority(address(0)))
    {}

    //============================== MANAGE ===============================

    /**
     * @notice Allows manager to make an arbitrary function call from this contract.
     * @dev Callable by MANAGER_ROLE.
     */
    function manage(address target, bytes calldata data, uint256 value)
        external
        requiresAuth
        returns (bytes memory result)
    {
        result = target.functionCallWithValue(data, value);
    }

    /**
     * @notice Allows manager to make arbitrary function calls from this contract.
     * @dev Callable by MANAGER_ROLE.
     */
    function manage(address[] calldata targets, bytes[] calldata data, uint256[] calldata values)
        external
        requiresAuth
        returns (bytes[] memory results)
    {
        uint256 targetsLength = targets.length;
        results = new bytes[](targetsLength);
        for (uint256 i; i < targetsLength; ++i) {
            results[i] = targets[i].functionCallWithValue(data[i], values[i]);
        }
    }

    //============================== ENTER ===============================

    /**
     * @notice Allows minter to mint shares, in exchange for assets.
     * @dev If assetAmount is zero, no assets are transferred in.
     * @dev Callable by MINTER_ROLE.
     */
    function enter(address from, ERC20 asset, uint256 assetAmount, address to, uint256 shareAmount)
        external
        requiresAuth
    {
        // Transfer assets in
        if (assetAmount > 0) asset.safeTransferFrom(from, address(this), assetAmount);

        // Mint shares.
        _mint(to, shareAmount);

        emit Enter(from, address(asset), assetAmount, to, shareAmount);
    }

    //============================== EXIT ===============================

    /**
     * @notice Allows burner to burn shares, in exchange for assets.
     * @dev If assetAmount is zero, no assets are transferred out.
     * @dev Callable by BURNER_ROLE.
     */
    function exit(address to, ERC20 asset, uint256 assetAmount, address from, uint256 shareAmount)
        external
        requiresAuth
    {
        // Burn shares.
        _burn(from, shareAmount);

        // Transfer assets out.
        if (assetAmount > 0) asset.safeTransfer(to, assetAmount);

        emit Exit(to, address(asset), assetAmount, from, shareAmount);
    }

    //============================== BEFORE TRANSFER HOOK ===============================
    /**
     * @notice Sets the share locker.
     * @notice If set to zero address, the share locker logic is disabled.
     * @dev Callable by OWNER_ROLE.
     */
    function setBeforeTransferHook(address _hook) external requiresAuth {
        hook = BeforeTransferHook(_hook);
    }

    /**
     * @notice Call `beforeTransferHook` passing in `from` `to`, and `msg.sender`.
     */
    function _callBeforeTransfer(address from, address to) internal view {
        if (address(hook) != address(0)) hook.beforeTransfer(from, to, msg.sender);
    }

    function transfer(address to, uint256 amount) public override returns (bool) {
        _callBeforeTransfer(msg.sender, to);
        return super.transfer(to, amount);
    }

    function transferFrom(address from, address to, uint256 amount) public override returns (bool) {
        _callBeforeTransfer(from, to);
        return super.transferFrom(from, to, amount);
    }

    //============================== RECEIVE ===============================

    receive() external payable {}
}

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;

/// @notice Provides a flexible and updatable auth pattern which is completely separate from application logic.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/auth/Auth.sol)
/// @author Modified from Dappsys (https://github.com/dapphub/ds-auth/blob/master/src/auth.sol)
abstract contract Auth {
    event OwnershipTransferred(address indexed user, address indexed newOwner);

    event AuthorityUpdated(address indexed user, Authority indexed newAuthority);

    address public owner;

    Authority public authority;

    constructor(address _owner, Authority _authority) {
        owner = _owner;
        authority = _authority;

        emit OwnershipTransferred(msg.sender, _owner);
        emit AuthorityUpdated(msg.sender, _authority);
    }

    modifier requiresAuth() virtual {
        require(isAuthorized(msg.sender, msg.sig), "UNAUTHORIZED");

        _;
    }

    function isAuthorized(address user, bytes4 functionSig) internal view virtual returns (bool) {
        Authority auth = authority; // Memoizing authority saves us a warm SLOAD, around 100 gas.

        // Checking if the caller is the owner only after calling the authority saves gas in most cases, but be
        // aware that this makes protected functions uncallable even to the owner if the authority is out of order.
        return (address(auth) != address(0) && auth.canCall(user, address(this), functionSig)) || user == owner;
    }

    function setAuthority(Authority newAuthority) public virtual {
        // We check if the caller is the owner first because we want to ensure they can
        // always swap out the authority even if it's reverting or using up a lot of gas.
        require(msg.sender == owner || authority.canCall(msg.sender, address(this), msg.sig));

        authority = newAuthority;

        emit AuthorityUpdated(msg.sender, newAuthority);
    }

    function transferOwnership(address newOwner) public virtual requiresAuth {
        owner = newOwner;

        emit OwnershipTransferred(msg.sender, newOwner);
    }
}

/// @notice A generic interface for a contract which provides authorization data to an Auth instance.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/auth/Auth.sol)
/// @author Modified from Dappsys (https://github.com/dapphub/ds-auth/blob/master/src/auth.sol)
interface Authority {
    function canCall(
        address user,
        address target,
        bytes4 functionSig
    ) external view returns (bool);
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.21;

interface IPausable {
    function pause() external;
    function unpause() external;
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.21;

import {FixedPointMathLib} from "@solmate/utils/FixedPointMathLib.sol";
import {IRateProvider} from "src/interfaces/IRateProvider.sol";
import {ERC20} from "@solmate/tokens/ERC20.sol";
import {SafeTransferLib} from "@solmate/utils/SafeTransferLib.sol";
import {BoringVault} from "src/base/BoringVault.sol";
import {Auth, Authority} from "@solmate/auth/Auth.sol";
import {IPausable} from "src/interfaces/IPausable.sol";

contract AccountantWithRateProviders is Auth, IRateProvider, IPausable {
    using FixedPointMathLib for uint256;
    using SafeTransferLib for ERC20;

    // ========================================= STRUCTS =========================================

    /**
     * @param payoutAddress the address `claimFees` sends fees to
     * @param highwaterMark the highest value of the BoringVault's share price
     * @param feesOwedInBase total pending fees owed in terms of base
     * @param totalSharesLastUpdate total amount of shares the last exchange rate update
     * @param exchangeRate the current exchange rate in terms of base
     * @param allowedExchangeRateChangeUpper the max allowed change to exchange rate from an update
     * @param allowedExchangeRateChangeLower the min allowed change to exchange rate from an update
     * @param lastUpdateTimestamp the block timestamp of the last exchange rate update
     * @param isPaused whether or not this contract is paused
     * @param minimumUpdateDelayInSeconds the minimum amount of time that must pass between
     *        exchange rate updates, such that the update won't trigger the contract to be paused
     * @param platformFee the platform fee
     * @param performanceFee the performance fee
     */
    struct AccountantState {
        address payoutAddress;
        uint96 highwaterMark;
        uint128 feesOwedInBase;
        uint128 totalSharesLastUpdate;
        uint96 exchangeRate;
        uint16 allowedExchangeRateChangeUpper;
        uint16 allowedExchangeRateChangeLower;
        uint64 lastUpdateTimestamp;
        bool isPaused;
        uint24 minimumUpdateDelayInSeconds;
        uint16 platformFee;
        uint16 performanceFee;
    }

    /**
     * @param isPeggedToBase whether or not the asset is 1:1 with the base asset
     * @param rateProvider the rate provider for this asset if `isPeggedToBase` is false
     */
    struct RateProviderData {
        bool isPeggedToBase;
        IRateProvider rateProvider;
    }

    // ========================================= STATE =========================================

    /**
     * @notice Store the accountant state in 3 packed slots.
     */
    AccountantState public accountantState;

    /**
     * @notice Maps ERC20s to their RateProviderData.
     */
    mapping(ERC20 => RateProviderData) public rateProviderData;

    //============================== ERRORS ===============================

    error AccountantWithRateProviders__UpperBoundTooSmall();
    error AccountantWithRateProviders__LowerBoundTooLarge();
    error AccountantWithRateProviders__PlatformFeeTooLarge();
    error AccountantWithRateProviders__PerformanceFeeTooLarge();
    error AccountantWithRateProviders__Paused();
    error AccountantWithRateProviders__ZeroFeesOwed();
    error AccountantWithRateProviders__OnlyCallableByBoringVault();
    error AccountantWithRateProviders__UpdateDelayTooLarge();
    error AccountantWithRateProviders__ExchangeRateAboveHighwaterMark();

    //============================== EVENTS ===============================

    event Paused();
    event Unpaused();
    event DelayInSecondsUpdated(uint24 oldDelay, uint24 newDelay);
    event UpperBoundUpdated(uint16 oldBound, uint16 newBound);
    event LowerBoundUpdated(uint16 oldBound, uint16 newBound);
    event PlatformFeeUpdated(uint16 oldFee, uint16 newFee);
    event PerformanceFeeUpdated(uint16 oldFee, uint16 newFee);
    event PayoutAddressUpdated(address oldPayout, address newPayout);
    event RateProviderUpdated(address asset, bool isPegged, address rateProvider);
    event ExchangeRateUpdated(uint96 oldRate, uint96 newRate, uint64 currentTime);
    event FeesClaimed(address indexed feeAsset, uint256 amount);
    event HighwaterMarkReset();

    //============================== IMMUTABLES ===============================

    /**
     * @notice The base asset rates are provided in.
     */
    ERC20 public immutable base;

    /**
     * @notice The decimals rates are provided in.
     */
    uint8 public immutable decimals;

    /**
     * @notice The BoringVault this accountant is working with.
     *         Used to determine share supply for fee calculation.
     */
    BoringVault public immutable vault;

    /**
     * @notice One share of the BoringVault.
     */
    uint256 internal immutable ONE_SHARE;

    constructor(
        address _owner,
        address _vault,
        address payoutAddress,
        uint96 startingExchangeRate,
        address _base,
        uint16 allowedExchangeRateChangeUpper,
        uint16 allowedExchangeRateChangeLower,
        uint24 minimumUpdateDelayInSeconds,
        uint16 platformFee,
        uint16 performanceFee
    ) Auth(_owner, Authority(address(0))) {
        base = ERC20(_base);
        decimals = ERC20(_base).decimals();
        vault = BoringVault(payable(_vault));
        ONE_SHARE = 10 ** vault.decimals();
        accountantState = AccountantState({
            payoutAddress: payoutAddress,
            highwaterMark: startingExchangeRate,
            feesOwedInBase: 0,
            totalSharesLastUpdate: uint128(vault.totalSupply()),
            exchangeRate: startingExchangeRate,
            allowedExchangeRateChangeUpper: allowedExchangeRateChangeUpper,
            allowedExchangeRateChangeLower: allowedExchangeRateChangeLower,
            lastUpdateTimestamp: uint64(block.timestamp),
            isPaused: false,
            minimumUpdateDelayInSeconds: minimumUpdateDelayInSeconds,
            platformFee: platformFee,
            performanceFee: performanceFee
        });
    }

    // ========================================= ADMIN FUNCTIONS =========================================
    /**
     * @notice Pause this contract, which prevents future calls to `updateExchangeRate`, and any safe rate
     *         calls will revert.
     * @dev Callable by MULTISIG_ROLE.
     */
    function pause() external requiresAuth {
        accountantState.isPaused = true;
        emit Paused();
    }

    /**
     * @notice Unpause this contract, which allows future calls to `updateExchangeRate`, and any safe rate
     *         calls will stop reverting.
     * @dev Callable by MULTISIG_ROLE.
     */
    function unpause() external requiresAuth {
        accountantState.isPaused = false;
        emit Unpaused();
    }

    /**
     * @notice Update the minimum time delay between `updateExchangeRate` calls.
     * @dev There are no input requirements, as it is possible the admin would want
     *      the exchange rate updated as frequently as needed.
     * @dev Callable by OWNER_ROLE.
     */
    function updateDelay(uint24 minimumUpdateDelayInSeconds) external requiresAuth {
        if (minimumUpdateDelayInSeconds > 14 days) revert AccountantWithRateProviders__UpdateDelayTooLarge();
        uint24 oldDelay = accountantState.minimumUpdateDelayInSeconds;
        accountantState.minimumUpdateDelayInSeconds = minimumUpdateDelayInSeconds;
        emit DelayInSecondsUpdated(oldDelay, minimumUpdateDelayInSeconds);
    }

    /**
     * @notice Update the allowed upper bound change of exchange rate between `updateExchangeRateCalls`.
     * @dev Callable by OWNER_ROLE.
     */
    function updateUpper(uint16 allowedExchangeRateChangeUpper) external requiresAuth {
        if (allowedExchangeRateChangeUpper < 1e4) revert AccountantWithRateProviders__UpperBoundTooSmall();
        uint16 oldBound = accountantState.allowedExchangeRateChangeUpper;
        accountantState.allowedExchangeRateChangeUpper = allowedExchangeRateChangeUpper;
        emit UpperBoundUpdated(oldBound, allowedExchangeRateChangeUpper);
    }

    /**
     * @notice Update the allowed lower bound change of exchange rate between `updateExchangeRateCalls`.
     * @dev Callable by OWNER_ROLE.
     */
    function updateLower(uint16 allowedExchangeRateChangeLower) external requiresAuth {
        if (allowedExchangeRateChangeLower > 1e4) revert AccountantWithRateProviders__LowerBoundTooLarge();
        uint16 oldBound = accountantState.allowedExchangeRateChangeLower;
        accountantState.allowedExchangeRateChangeLower = allowedExchangeRateChangeLower;
        emit LowerBoundUpdated(oldBound, allowedExchangeRateChangeLower);
    }

    /**
     * @notice Update the platform fee to a new value.
     * @dev Callable by OWNER_ROLE.
     */
    function updatePlatformFee(uint16 platformFee) external requiresAuth {
        if (platformFee > 0.2e4) revert AccountantWithRateProviders__PlatformFeeTooLarge();
        uint16 oldFee = accountantState.platformFee;
        accountantState.platformFee = platformFee;
        emit PlatformFeeUpdated(oldFee, platformFee);
    }

    /**
     * @notice Update the performance fee to a new value.
     * @dev Callable by OWNER_ROLE.
     */
    function updatePerformanceFee(uint16 performanceFee) external requiresAuth {
        if (performanceFee > 0.5e4) revert AccountantWithRateProviders__PerformanceFeeTooLarge();
        uint16 oldFee = accountantState.performanceFee;
        accountantState.performanceFee = performanceFee;
        emit PerformanceFeeUpdated(oldFee, performanceFee);
    }

    /**
     * @notice Update the payout address fees are sent to.
     * @dev Callable by OWNER_ROLE.
     */
    function updatePayoutAddress(address payoutAddress) external requiresAuth {
        address oldPayout = accountantState.payoutAddress;
        accountantState.payoutAddress = payoutAddress;
        emit PayoutAddressUpdated(oldPayout, payoutAddress);
    }

    /**
     * @notice Update the rate provider data for a specific `asset`.
     * @dev Rate providers must return rates in terms of `base` or
     * an asset pegged to base and they must use the same decimals
     * as `asset`.
     * @dev Callable by OWNER_ROLE.
     */
    function setRateProviderData(ERC20 asset, bool isPeggedToBase, address rateProvider) external requiresAuth {
        rateProviderData[asset] =
            RateProviderData({isPeggedToBase: isPeggedToBase, rateProvider: IRateProvider(rateProvider)});
        emit RateProviderUpdated(address(asset), isPeggedToBase, rateProvider);
    }

    /**
     * @notice Reset the highwater mark to the current exchange rate.
     * @dev Callable by OWNER_ROLE.
     */
    function resetHighwaterMark() external virtual requiresAuth {
        AccountantState storage state = accountantState;

        if (state.exchangeRate > state.highwaterMark) {
            revert AccountantWithRateProviders__ExchangeRateAboveHighwaterMark();
        }

        uint64 currentTime = uint64(block.timestamp);
        uint256 currentTotalShares = vault.totalSupply();
        _calculateFeesOwed(state, state.exchangeRate, state.exchangeRate, currentTotalShares, currentTime);
        state.totalSharesLastUpdate = uint128(currentTotalShares);
        state.highwaterMark = accountantState.exchangeRate;
        state.lastUpdateTimestamp = currentTime;

        emit HighwaterMarkReset();
    }

    // ========================================= UPDATE EXCHANGE RATE/FEES FUNCTIONS =========================================

    /**
     * @notice Updates this contract exchangeRate.
     * @dev If new exchange rate is outside of accepted bounds, or if not enough time has passed, this
     *      will pause the contract, and this function will NOT calculate fees owed.
     * @dev Callable by UPDATE_EXCHANGE_RATE_ROLE.
     */
    function updateExchangeRate(uint96 newExchangeRate) external virtual requiresAuth {
        (
            bool shouldPause,
            AccountantState storage state,
            uint64 currentTime,
            uint256 currentExchangeRate,
            uint256 currentTotalShares
        ) = _beforeUpdateExchangeRate(newExchangeRate);
        if (shouldPause) {
            // Instead of reverting, pause the contract. This way the exchange rate updater is able to update the exchange rate
            // to a better value, and pause it.
            state.isPaused = true;
        } else {
            _calculateFeesOwed(state, newExchangeRate, currentExchangeRate, currentTotalShares, currentTime);
        }

        newExchangeRate = _setExchangeRate(newExchangeRate, state);
        state.totalSharesLastUpdate = uint128(currentTotalShares);
        state.lastUpdateTimestamp = currentTime;

        emit ExchangeRateUpdated(uint96(currentExchangeRate), newExchangeRate, currentTime);
    }

    /**
     * @notice Claim pending fees.
     * @dev This function must be called by the BoringVault.
     * @dev This function will lose precision if the exchange rate
     *      decimals is greater than the feeAsset's decimals.
     */
    function claimFees(ERC20 feeAsset) external {
        if (msg.sender != address(vault)) revert AccountantWithRateProviders__OnlyCallableByBoringVault();

        AccountantState storage state = accountantState;
        if (state.isPaused) revert AccountantWithRateProviders__Paused();
        if (state.feesOwedInBase == 0) revert AccountantWithRateProviders__ZeroFeesOwed();

        // Determine amount of fees owed in feeAsset.
        uint256 feesOwedInFeeAsset;
        RateProviderData memory data = rateProviderData[feeAsset];
        if (address(feeAsset) == address(base)) {
            feesOwedInFeeAsset = state.feesOwedInBase;
        } else {
            uint8 feeAssetDecimals = ERC20(feeAsset).decimals();
            uint256 feesOwedInBaseUsingFeeAssetDecimals =
                _changeDecimals(state.feesOwedInBase, decimals, feeAssetDecimals);
            if (data.isPeggedToBase) {
                feesOwedInFeeAsset = feesOwedInBaseUsingFeeAssetDecimals;
            } else {
                uint256 rate = data.rateProvider.getRate();
                feesOwedInFeeAsset = feesOwedInBaseUsingFeeAssetDecimals.mulDivDown(10 ** feeAssetDecimals, rate);
            }
        }
        // Zero out fees owed.
        state.feesOwedInBase = 0;
        // Transfer fee asset to payout address.
        feeAsset.safeTransferFrom(msg.sender, state.payoutAddress, feesOwedInFeeAsset);

        emit FeesClaimed(address(feeAsset), feesOwedInFeeAsset);
    }

    // ========================================= VIEW FUNCTIONS =========================================

    /**
     * @notice Get this BoringVault's current rate in the base.
     */
    function getRate() public view returns (uint256 rate) {
        rate = accountantState.exchangeRate;
    }

    /**
     * @notice Get this BoringVault's current rate in the base.
     * @dev Revert if paused.
     */
    function getRateSafe() external view returns (uint256 rate) {
        if (accountantState.isPaused) revert AccountantWithRateProviders__Paused();
        rate = getRate();
    }

    /**
     * @notice Get this BoringVault's current rate in the provided quote.
     * @dev `quote` must have its RateProviderData set, else this will revert.
     * @dev This function will lose precision if the exchange rate
     *      decimals is greater than the quote's decimals.
     */
    function getRateInQuote(ERC20 quote) public view returns (uint256 rateInQuote) {
        if (address(quote) == address(base)) {
            rateInQuote = accountantState.exchangeRate;
        } else {
            RateProviderData memory data = rateProviderData[quote];
            uint8 quoteDecimals = ERC20(quote).decimals();
            uint256 exchangeRateInQuoteDecimals = _changeDecimals(accountantState.exchangeRate, decimals, quoteDecimals);
            if (data.isPeggedToBase) {
                rateInQuote = exchangeRateInQuoteDecimals;
            } else {
                uint256 quoteRate = data.rateProvider.getRate();
                uint256 oneQuote = 10 ** quoteDecimals;
                rateInQuote = oneQuote.mulDivDown(exchangeRateInQuoteDecimals, quoteRate);
            }
        }
    }

    /**
     * @notice Get this BoringVault's current rate in the provided quote.
     * @dev `quote` must have its RateProviderData set, else this will revert.
     * @dev Revert if paused.
     */
    function getRateInQuoteSafe(ERC20 quote) external view returns (uint256 rateInQuote) {
        if (accountantState.isPaused) revert AccountantWithRateProviders__Paused();
        rateInQuote = getRateInQuote(quote);
    }

    /**
     * @notice Preview the result of an update to the exchange rate.
     * @return updateWillPause Whether the update will pause the contract.
     * @return newFeesOwedInBase The new fees owed in base.
     * @return totalFeesOwedInBase The total fees owed in base.
     */
    function previewUpdateExchangeRate(uint96 newExchangeRate)
        external
        view
        virtual
        returns (bool updateWillPause, uint256 newFeesOwedInBase, uint256 totalFeesOwedInBase)
    {
        (
            bool shouldPause,
            AccountantState storage state,
            uint64 currentTime,
            uint256 currentExchangeRate,
            uint256 currentTotalShares
        ) = _beforeUpdateExchangeRate(newExchangeRate);
        updateWillPause = shouldPause;
        totalFeesOwedInBase = state.feesOwedInBase;
        if (!shouldPause) {
            (uint256 platformFeesOwedInBase, uint256 shareSupplyToUse) = _calculatePlatformFee(
                state.totalSharesLastUpdate,
                state.lastUpdateTimestamp,
                state.platformFee,
                newExchangeRate,
                currentExchangeRate,
                currentTotalShares,
                currentTime
            );

            uint256 performanceFeesOwedInBase;
            if (newExchangeRate > state.highwaterMark) {
                (performanceFeesOwedInBase,) = _calculatePerformanceFee(
                    newExchangeRate, shareSupplyToUse, state.highwaterMark, state.performanceFee
                );
            }
            newFeesOwedInBase = platformFeesOwedInBase + performanceFeesOwedInBase;
            totalFeesOwedInBase += newFeesOwedInBase;
        }
    }

    // ========================================= INTERNAL HELPER FUNCTIONS =========================================
    /**
     * @notice Used to change the decimals of precision used for an amount.
     */
    function _changeDecimals(uint256 amount, uint8 fromDecimals, uint8 toDecimals) internal pure returns (uint256) {
        if (fromDecimals == toDecimals) {
            return amount;
        } else if (fromDecimals < toDecimals) {
            return amount * 10 ** (toDecimals - fromDecimals);
        } else {
            return amount / 10 ** (fromDecimals - toDecimals);
        }
    }

    /**
     * @notice Check if the new exchange rate is outside of the allowed bounds or if not enough time has passed.
     */
    function _beforeUpdateExchangeRate(uint96 newExchangeRate)
        internal
        view
        returns (
            bool shouldPause,
            AccountantState storage state,
            uint64 currentTime,
            uint256 currentExchangeRate,
            uint256 currentTotalShares
        )
    {
        state = accountantState;
        if (state.isPaused) revert AccountantWithRateProviders__Paused();
        currentTime = uint64(block.timestamp);
        currentExchangeRate = state.exchangeRate;
        currentTotalShares = vault.totalSupply();
        shouldPause = currentTime < state.lastUpdateTimestamp + state.minimumUpdateDelayInSeconds
            || newExchangeRate > currentExchangeRate.mulDivDown(state.allowedExchangeRateChangeUpper, 1e4)
            || newExchangeRate < currentExchangeRate.mulDivDown(state.allowedExchangeRateChangeLower, 1e4);
    }

    /**
     * @notice Set the exchange rate.
     */
    function _setExchangeRate(uint96 newExchangeRate, AccountantState storage state)
        internal
        virtual
        returns (uint96)
    {
        state.exchangeRate = newExchangeRate;
        return newExchangeRate;
    }

    /**
     * @notice Calculate platform fees.
     */
    function _calculatePlatformFee(
        uint128 totalSharesLastUpdate,
        uint64 lastUpdateTimestamp,
        uint16 platformFee,
        uint96 newExchangeRate,
        uint256 currentExchangeRate,
        uint256 currentTotalShares,
        uint64 currentTime
    ) internal view returns (uint256 platformFeesOwedInBase, uint256 shareSupplyToUse) {
        shareSupplyToUse = currentTotalShares;
        // Use the minimum between current total supply and total supply for last update.
        if (totalSharesLastUpdate < shareSupplyToUse) {
            shareSupplyToUse = totalSharesLastUpdate;
        }

        // Determine platform fees owned.
        if (platformFee > 0) {
            uint256 timeDelta = currentTime - lastUpdateTimestamp;
            uint256 minimumAssets = newExchangeRate > currentExchangeRate
                ? shareSupplyToUse.mulDivDown(currentExchangeRate, ONE_SHARE)
                : shareSupplyToUse.mulDivDown(newExchangeRate, ONE_SHARE);
            uint256 platformFeesAnnual = minimumAssets.mulDivDown(platformFee, 1e4);
            platformFeesOwedInBase = platformFeesAnnual.mulDivDown(timeDelta, 365 days);
        }
    }

    /**
     * @notice Calculate performance fees.
     */
    function _calculatePerformanceFee(
        uint96 newExchangeRate,
        uint256 shareSupplyToUse,
        uint96 datum,
        uint16 performanceFee
    ) internal view returns (uint256 performanceFeesOwedInBase, uint256 yieldEarned) {
        uint256 changeInExchangeRate = newExchangeRate - datum;
        yieldEarned = changeInExchangeRate.mulDivDown(shareSupplyToUse, ONE_SHARE);
        if (performanceFee > 0) {
            performanceFeesOwedInBase = yieldEarned.mulDivDown(performanceFee, 1e4);
        }
    }

    /**
     * @notice Calculate fees owed in base.
     * @dev This function will update the highwater mark if the new exchange rate is higher.
     */
    function _calculateFeesOwed(
        AccountantState storage state,
        uint96 newExchangeRate,
        uint256 currentExchangeRate,
        uint256 currentTotalShares,
        uint64 currentTime
    ) internal virtual {
        // Only update fees if we are not paused.
        // Update fee accounting.
        (uint256 newFeesOwedInBase, uint256 shareSupplyToUse) = _calculatePlatformFee(
            state.totalSharesLastUpdate,
            state.lastUpdateTimestamp,
            state.platformFee,
            newExchangeRate,
            currentExchangeRate,
            currentTotalShares,
            currentTime
        );

        // Account for performance fees.
        if (newExchangeRate > state.highwaterMark) {
            (uint256 performanceFeesOwedInBase,) =
                _calculatePerformanceFee(newExchangeRate, shareSupplyToUse, state.highwaterMark, state.performanceFee);

            // Add performance fees to fees owed.
            newFeesOwedInBase += performanceFeesOwedInBase;

            // Always update the highwater mark if the new exchange rate is higher.
            // This way if we are not iniitiall taking performance fees, we can start taking them
            // without back charging them on past performance.
            state.highwaterMark = newExchangeRate;
        }

        state.feesOwedInBase += uint128(newFeesOwedInBase);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/utils/ERC721Holder.sol)

pragma solidity ^0.8.20;

import {IERC721Receiver} from "../IERC721Receiver.sol";

/**
 * @dev Implementation of the {IERC721Receiver} interface.
 *
 * Accepts all token transfers.
 * Make sure the contract is able to use its token with {IERC721-safeTransferFrom}, {IERC721-approve} or
 * {IERC721-setApprovalForAll}.
 */
abstract contract ERC721Holder is IERC721Receiver {
    /**
     * @dev See {IERC721Receiver-onERC721Received}.
     *
     * Always returns `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(address, address, uint256, bytes memory) public virtual returns (bytes4) {
        return this.onERC721Received.selector;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC1155/utils/ERC1155Holder.sol)

pragma solidity ^0.8.20;

import {IERC165, ERC165} from "../../../utils/introspection/ERC165.sol";
import {IERC1155Receiver} from "../IERC1155Receiver.sol";

/**
 * @dev Simple implementation of `IERC1155Receiver` that will allow a contract to hold ERC1155 tokens.
 *
 * IMPORTANT: When inheriting this contract, you must include a way to use the received tokens, otherwise they will be
 * stuck.
 */
abstract contract ERC1155Holder is ERC165, IERC1155Receiver {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(IERC1155Receiver).interfaceId || super.supportsInterface(interfaceId);
    }

    function onERC1155Received(
        address,
        address,
        uint256,
        uint256,
        bytes memory
    ) public virtual override returns (bytes4) {
        return this.onERC1155Received.selector;
    }

    function onERC1155BatchReceived(
        address,
        address,
        uint256[] memory,
        uint256[] memory,
        bytes memory
    ) public virtual override returns (bytes4) {
        return this.onERC1155BatchReceived.selector;
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.21;

interface BeforeTransferHook {
    function beforeTransfer(address from, address to, address operator) external view;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.20;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be
     * reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)

pragma solidity ^0.8.20;

import {IERC165} from "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC1155/IERC1155Receiver.sol)

pragma solidity ^0.8.20;

import {IERC165} from "../../utils/introspection/IERC165.sol";

/**
 * @dev Interface that must be implemented by smart contracts in order to receive
 * ERC-1155 token transfers.
 */
interface IERC1155Receiver is IERC165 {
    /**
     * @dev Handles the receipt of a single ERC1155 token type. This function is
     * called at the end of a `safeTransferFrom` after the balance has been updated.
     *
     * NOTE: To accept the transfer, this must return
     * `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
     * (i.e. 0xf23a6e61, or its own function selector).
     *
     * @param operator The address which initiated the transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param id The ID of the token being transferred
     * @param value The amount of tokens being transferred
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
     */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
     * @dev Handles the receipt of a multiple ERC1155 token types. This function
     * is called at the end of a `safeBatchTransferFrom` after the balances have
     * been updated.
     *
     * NOTE: To accept the transfer(s), this must return
     * `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
     * (i.e. 0xbc197c81, or its own function selector).
     *
     * @param operator The address which initiated the batch transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param ids An array containing ids of each token being transferred (order and length must match values array)
     * @param values An array containing amounts of each token being transferred (order and length must match ids array)
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
     */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

{
  "remappings": [
    "@solmate/=lib/solmate/src/",
    "@forge-std/=lib/forge-std/src/",
    "@ds-test/=lib/forge-std/lib/ds-test/src/",
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "@openzeppelin/=lib/openzeppelin-contracts/",
    "@ccip/=lib/ccip/",
    "@oapp-auth/=lib/OAppAuth/src/",
    "@devtools-oapp-evm/=lib/OAppAuth/lib/devtools/packages/oapp-evm/contracts/oapp/",
    "@layerzerolabs/lz-evm-messagelib-v2/=lib/OAppAuth/node_modules/@layerzerolabs/lz-evm-messagelib-v2/",
    "@layerzerolabs/lz-evm-protocol-v2/=lib/OAppAuth/lib/LayerZero-V2/packages/layerzero-v2/evm/protocol/",
    "@layerzerolabs/oapp-evm/=lib/OAppAuth/lib/devtools/packages/oapp-evm/",
    "@lz-oapp-evm/=lib/OAppAuth/lib/LayerZero-V2/packages/layerzero-v2/evm/oapp/contracts/oapp/",
    "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    "@sbu/=lib/OAppAuth/lib/solidity-bytes-utils/",
    "LayerZero-V2/=lib/OAppAuth/lib/",
    "OAppAuth/=lib/OAppAuth/",
    "ccip/=lib/ccip/contracts/",
    "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    "forge-std/=lib/forge-std/src/",
    "halmos-cheatcodes/=lib/OAppAuth/lib/openzeppelin-contracts/lib/halmos-cheatcodes/src/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "solidity-bytes-utils/=lib/OAppAuth/node_modules/solidity-bytes-utils/",
    "solmate/=lib/solmate/src/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "shanghai",
  "viaIR": false,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_owner","type":"address"},{"internalType":"address","name":"_vault","type":"address"},{"internalType":"address","name":"payoutAddress","type":"address"},{"internalType":"uint96","name":"startingExchangeRate","type":"uint96"},{"internalType":"address","name":"_base","type":"address"},{"internalType":"uint16","name":"allowedExchangeRateChangeUpper","type":"uint16"},{"internalType":"uint16","name":"allowedExchangeRateChangeLower","type":"uint16"},{"internalType":"uint24","name":"minimumUpdateDelayInSeconds","type":"uint24"},{"internalType":"uint16","name":"platformFee","type":"uint16"},{"internalType":"uint16","name":"performanceFee","type":"uint16"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"AccountantWithFixedRate__HighWaterMarkCannotChange","type":"error"},{"inputs":[],"name":"AccountantWithFixedRate__OnlyCallableByYieldDistributor","type":"error"},{"inputs":[],"name":"AccountantWithFixedRate__StartingExchangeRateCannotBeGreaterThanFixed","type":"error"},{"inputs":[],"name":"AccountantWithFixedRate__UnsafeUint96Cast","type":"error"},{"inputs":[],"name":"AccountantWithFixedRate__ZeroYieldOwed","type":"error"},{"inputs":[],"name":"AccountantWithRateProviders__ExchangeRateAboveHighwaterMark","type":"error"},{"inputs":[],"name":"AccountantWithRateProviders__LowerBoundTooLarge","type":"error"},{"inputs":[],"name":"AccountantWithRateProviders__OnlyCallableByBoringVault","type":"error"},{"inputs":[],"name":"AccountantWithRateProviders__Paused","type":"error"},{"inputs":[],"name":"AccountantWithRateProviders__PerformanceFeeTooLarge","type":"error"},{"inputs":[],"name":"AccountantWithRateProviders__PlatformFeeTooLarge","type":"error"},{"inputs":[],"name":"AccountantWithRateProviders__UpdateDelayTooLarge","type":"error"},{"inputs":[],"name":"AccountantWithRateProviders__UpperBoundTooSmall","type":"error"},{"inputs":[],"name":"AccountantWithRateProviders__ZeroFeesOwed","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"contract Authority","name":"newAuthority","type":"address"}],"name":"AuthorityUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint24","name":"oldDelay","type":"uint24"},{"indexed":false,"internalType":"uint24","name":"newDelay","type":"uint24"}],"name":"DelayInSecondsUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint96","name":"oldRate","type":"uint96"},{"indexed":false,"internalType":"uint96","name":"newRate","type":"uint96"},{"indexed":false,"internalType":"uint64","name":"currentTime","type":"uint64"}],"name":"ExchangeRateUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"feeAsset","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"FeesClaimed","type":"event"},{"anonymous":false,"inputs":[],"name":"HighwaterMarkReset","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint16","name":"oldBound","type":"uint16"},{"indexed":false,"internalType":"uint16","name":"newBound","type":"uint16"}],"name":"LowerBoundUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"oldPayout","type":"address"},{"indexed":false,"internalType":"address","name":"newPayout","type":"address"}],"name":"PayoutAddressUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint16","name":"oldFee","type":"uint16"},{"indexed":false,"internalType":"uint16","name":"newFee","type":"uint16"}],"name":"PerformanceFeeUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint16","name":"oldFee","type":"uint16"},{"indexed":false,"internalType":"uint16","name":"newFee","type":"uint16"}],"name":"PlatformFeeUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"asset","type":"address"},{"indexed":false,"internalType":"bool","name":"isPegged","type":"bool"},{"indexed":false,"internalType":"address","name":"rateProvider","type":"address"}],"name":"RateProviderUpdated","type":"event"},{"anonymous":false,"inputs":[],"name":"Unpaused","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint16","name":"oldBound","type":"uint16"},{"indexed":false,"internalType":"uint16","name":"newBound","type":"uint16"}],"name":"UpperBoundUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"yieldAsset","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"YieldClaimed","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"yieldDistributor","type":"address"}],"name":"YieldDistributorUpdated","type":"event"},{"inputs":[],"name":"accountantState","outputs":[{"internalType":"address","name":"payoutAddress","type":"address"},{"internalType":"uint96","name":"highwaterMark","type":"uint96"},{"internalType":"uint128","name":"feesOwedInBase","type":"uint128"},{"internalType":"uint128","name":"totalSharesLastUpdate","type":"uint128"},{"internalType":"uint96","name":"exchangeRate","type":"uint96"},{"internalType":"uint16","name":"allowedExchangeRateChangeUpper","type":"uint16"},{"internalType":"uint16","name":"allowedExchangeRateChangeLower","type":"uint16"},{"internalType":"uint64","name":"lastUpdateTimestamp","type":"uint64"},{"internalType":"bool","name":"isPaused","type":"bool"},{"internalType":"uint24","name":"minimumUpdateDelayInSeconds","type":"uint24"},{"internalType":"uint16","name":"platformFee","type":"uint16"},{"internalType":"uint16","name":"performanceFee","type":"uint16"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"authority","outputs":[{"internalType":"contract Authority","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"base","outputs":[{"internalType":"contract ERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract ERC20","name":"feeAsset","type":"address"}],"name":"claimFees","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract ERC20","name":"yieldAsset","type":"address"}],"name":"claimYield","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"fixedRateAccountantState","outputs":[{"internalType":"uint96","name":"yieldEarnedInBase","type":"uint96"},{"internalType":"address","name":"yieldDistributor","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getRate","outputs":[{"internalType":"uint256","name":"rate","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract ERC20","name":"quote","type":"address"}],"name":"getRateInQuote","outputs":[{"internalType":"uint256","name":"rateInQuote","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract ERC20","name":"quote","type":"address"}],"name":"getRateInQuoteSafe","outputs":[{"internalType":"uint256","name":"rateInQuote","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getRateSafe","outputs":[{"internalType":"uint256","name":"rate","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint96","name":"newExchangeRate","type":"uint96"}],"name":"previewUpdateExchangeRate","outputs":[{"internalType":"bool","name":"updateWillPause","type":"bool"},{"internalType":"uint256","name":"newFeesOwedInBase","type":"uint256"},{"internalType":"uint256","name":"totalFeesOwedInBase","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract ERC20","name":"","type":"address"}],"name":"rateProviderData","outputs":[{"internalType":"bool","name":"isPeggedToBase","type":"bool"},{"internalType":"contract IRateProvider","name":"rateProvider","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"resetHighwaterMark","outputs":[],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract Authority","name":"newAuthority","type":"address"}],"name":"setAuthority","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract ERC20","name":"asset","type":"address"},{"internalType":"bool","name":"isPeggedToBase","type":"bool"},{"internalType":"address","name":"rateProvider","type":"address"}],"name":"setRateProviderData","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"yieldDistributor","type":"address"}],"name":"setYieldDistributor","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unpause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint24","name":"minimumUpdateDelayInSeconds","type":"uint24"}],"name":"updateDelay","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint96","name":"newExchangeRate","type":"uint96"}],"name":"updateExchangeRate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint16","name":"allowedExchangeRateChangeLower","type":"uint16"}],"name":"updateLower","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"payoutAddress","type":"address"}],"name":"updatePayoutAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint16","name":"performanceFee","type":"uint16"}],"name":"updatePerformanceFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint16","name":"platformFee","type":"uint16"}],"name":"updatePlatformFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint16","name":"allowedExchangeRateChangeUpper","type":"uint16"}],"name":"updateUpper","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"vault","outputs":[{"internalType":"contract BoringVault","name":"","type":"address"}],"stateMutability":"view","type":"function"}]

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