Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.26;
pragma abicoder v2;

import '../../core/libraries/SafeCast.sol';
import '../../core/libraries/TickMath.sol';
import '../../core/interfaces/IRamsesV3Pool.sol';
import '../../core/interfaces/callback/IUniswapV3SwapCallback.sol';

import '../interfaces/IQuoter.sol';
import '../base/PeripheryImmutableState.sol';
import '../libraries/Path.sol';
import '../libraries/PoolAddress.sol';
import '../libraries/CallbackValidation.sol';

/// @title Provides quotes for swaps
/// @notice Allows getting the expected amount out or amount in for a given swap without executing the swap
/// @dev These functions are not gas efficient and should _not_ be called on chain. Instead, optimistically execute
/// the swap and check the amounts in the callback.
contract Quoter is IQuoter, IUniswapV3SwapCallback, PeripheryImmutableState {
    using Path for bytes;
    using SafeCast for uint256;

    /// @dev Transient storage variable used to check a safety condition in exact output swaps.
    uint256 private amountOutCached;

    constructor(address _deployer, address _WETH9) PeripheryImmutableState(_deployer, _WETH9) {}

    function getPool(address tokenA, address tokenB, int24 tickSpacing) private view returns (IRamsesV3Pool) {
        return IRamsesV3Pool(PoolAddress.computeAddress(deployer, PoolAddress.getPoolKey(tokenA, tokenB, tickSpacing)));
    }

    /// @inheritdoc IUniswapV3SwapCallback
    function uniswapV3SwapCallback(int256 amount0Delta, int256 amount1Delta, bytes memory path) external view override {
        /// @dev swaps entirely within 0-liquidity regions are not supported
        require(amount0Delta > 0 || amount1Delta > 0); 
        (address tokenIn, address tokenOut, int24 tickSpacing) = path.decodeFirstPool();
        CallbackValidation.verifyCallback(deployer, tokenIn, tokenOut, tickSpacing);

        (bool isExactInput, uint256 amountToPay, uint256 amountReceived) = amount0Delta > 0
            ? (tokenIn < tokenOut, uint256(amount0Delta), uint256(-amount1Delta))
            : (tokenOut < tokenIn, uint256(amount1Delta), uint256(-amount0Delta));
        if (isExactInput) {
            assembly {
                let ptr := mload(0x40)
                mstore(ptr, amountReceived)
                revert(ptr, 32)
            }
        } else {
            /// @dev if the cache has been populated, ensure that the full output amount has been received
            if (amountOutCached != 0) require(amountReceived == amountOutCached);
            assembly {
                let ptr := mload(0x40)
                mstore(ptr, amountToPay)
                revert(ptr, 32)
            }
        }
    }

    /// @dev Parses a revert reason that should contain the numeric quote
    function parseRevertReason(bytes memory reason) private pure returns (uint256) {
        if (reason.length != 32) {
            if (reason.length < 68) revert('Unexpected error');
            assembly {
                reason := add(reason, 0x04)
            }
            revert(abi.decode(reason, (string)));
        }
        return abi.decode(reason, (uint256));
    }

    /// @inheritdoc IQuoter
    function quoteExactInputSingle(
        address tokenIn,
        address tokenOut,
        int24 tickSpacing,
        uint256 amountIn,
        uint160 sqrtPriceLimitX96
    ) public override returns (uint256 amountOut) {
        bool zeroForOne = tokenIn < tokenOut;

        try
            getPool(tokenIn, tokenOut, tickSpacing).swap(
                /// @dev address(0) might cause issues with some tokens
                address(this), 
                zeroForOne,
                amountIn.toInt256(),
                sqrtPriceLimitX96 == 0
                    ? (zeroForOne ? TickMath.MIN_SQRT_RATIO + 1 : TickMath.MAX_SQRT_RATIO - 1)
                    : sqrtPriceLimitX96,
                abi.encodePacked(tokenIn, tickSpacing, tokenOut)
            )
        {} catch (bytes memory reason) {
            return parseRevertReason(reason);
        }
    }

    /// @inheritdoc IQuoter
    function quoteExactInput(bytes memory path, uint256 amountIn) external override returns (uint256 amountOut) {
        while (true) {
            bool hasMultiplePools = path.hasMultiplePools();

            (address tokenIn, address tokenOut, int24 tickSpacing) = path.decodeFirstPool();

            /// @dev the outputs of prior swaps become the inputs to subsequent ones
            amountIn = quoteExactInputSingle(tokenIn, tokenOut, tickSpacing, amountIn, 0);

            /// @dev decide whether to continue or terminate
            if (hasMultiplePools) {
                path = path.skipToken();
            } else {
                return amountIn;
            }
        }
    }

    /// @inheritdoc IQuoter
    function quoteExactOutputSingle(
        address tokenIn,
        address tokenOut,
        int24 tickSpacing,
        uint256 amountOut,
        uint160 sqrtPriceLimitX96
    ) public override returns (uint256 amountIn) {
        bool zeroForOne = tokenIn < tokenOut;

        /// @dev if no price limit has been specified, cache the output amount for comparison in the swap callback
        if (sqrtPriceLimitX96 == 0) amountOutCached = amountOut;
        try
            getPool(tokenIn, tokenOut, tickSpacing).swap(
                /// @dev address(0) might cause issues with some tokens
                address(this), 
                zeroForOne,
                -amountOut.toInt256(),
                sqrtPriceLimitX96 == 0
                    ? (zeroForOne ? TickMath.MIN_SQRT_RATIO + 1 : TickMath.MAX_SQRT_RATIO - 1)
                    : sqrtPriceLimitX96,
                abi.encodePacked(tokenOut, tickSpacing, tokenIn)
            )
        {} catch (bytes memory reason) {
            /// @dev clear cache
            if (sqrtPriceLimitX96 == 0) delete amountOutCached; 
            return parseRevertReason(reason);
        }
    }

    /// @inheritdoc IQuoter
    function quoteExactOutput(bytes memory path, uint256 amountOut) external override returns (uint256 amountIn) {
        while (true) {
            bool hasMultiplePools = path.hasMultiplePools();

            (address tokenOut, address tokenIn, int24 tickSpacing) = path.decodeFirstPool();

            /// @dev the inputs of prior swaps become the outputs of subsequent ones
            amountOut = quoteExactOutputSingle(tokenIn, tokenOut, tickSpacing, amountOut, 0);

            /// @dev decide whether to continue or terminate
            if (hasMultiplePools) {
                path = path.skipToken();
            } else {
                return amountOut;
            }
        }
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Safe casting methods
/// @notice Contains methods for safely casting between types
library SafeCast {
    /// @notice Cast a uint256 to a uint160, revert on overflow
    /// @param y The uint256 to be downcasted
    /// @return z The downcasted integer, now type uint160
    function toUint160(uint256 y) internal pure returns (uint160 z) {
        require((z = uint160(y)) == y);
    }

    /// @notice Cast a int256 to a int128, revert on overflow or underflow
    /// @param y The int256 to be downcasted
    /// @return z The downcasted integer, now type int128
    function toInt128(int256 y) internal pure returns (int128 z) {
        require((z = int128(y)) == y);
    }

    /// @notice Cast a uint256 to a int256, revert on overflow
    /// @param y The uint256 to be casted
    /// @return z The casted integer, now type int256
    function toInt256(uint256 y) internal pure returns (int256 z) {
        require(y < 2 ** 255);
        z = int256(y);
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.26;

/// @title Math library for computing sqrt prices from ticks and vice versa
/// @notice Computes sqrt price for ticks of size 1.0001, i.e. sqrt(1.0001^tick) as fixed point Q64.96 numbers. Supports
/// prices between 2**-128 and 2**128
library TickMath {
    error T();
    error R();

    /// @dev The minimum tick that may be passed to #getSqrtRatioAtTick computed from log base 1.0001 of 2**-128
    int24 internal constant MIN_TICK = -887272;
    /// @dev The maximum tick that may be passed to #getSqrtRatioAtTick computed from log base 1.0001 of 2**128
    int24 internal constant MAX_TICK = -MIN_TICK;

    /// @dev The minimum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MIN_TICK)
    uint160 internal constant MIN_SQRT_RATIO = 4295128739;
    /// @dev The maximum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MAX_TICK)
    uint160 internal constant MAX_SQRT_RATIO = 1461446703485210103287273052203988822378723970342;

    /// @notice Calculates sqrt(1.0001^tick) * 2^96
    /// @dev Throws if |tick| > max tick
    /// @param tick The input tick for the above formula
    /// @return sqrtPriceX96 A Fixed point Q64.96 number representing the sqrt of the ratio of the two assets (token1/token0)
    /// at the given tick
    function getSqrtRatioAtTick(int24 tick) internal pure returns (uint160 sqrtPriceX96) {
        unchecked {
            uint256 absTick = tick < 0 ? uint256(-int256(tick)) : uint256(int256(tick));
            if (absTick > uint256(int256(MAX_TICK))) revert T();

            uint256 ratio = absTick & 0x1 != 0
                ? 0xfffcb933bd6fad37aa2d162d1a594001
                : 0x100000000000000000000000000000000;
            if (absTick & 0x2 != 0) ratio = (ratio * 0xfff97272373d413259a46990580e213a) >> 128;
            if (absTick & 0x4 != 0) ratio = (ratio * 0xfff2e50f5f656932ef12357cf3c7fdcc) >> 128;
            if (absTick & 0x8 != 0) ratio = (ratio * 0xffe5caca7e10e4e61c3624eaa0941cd0) >> 128;
            if (absTick & 0x10 != 0) ratio = (ratio * 0xffcb9843d60f6159c9db58835c926644) >> 128;
            if (absTick & 0x20 != 0) ratio = (ratio * 0xff973b41fa98c081472e6896dfb254c0) >> 128;
            if (absTick & 0x40 != 0) ratio = (ratio * 0xff2ea16466c96a3843ec78b326b52861) >> 128;
            if (absTick & 0x80 != 0) ratio = (ratio * 0xfe5dee046a99a2a811c461f1969c3053) >> 128;
            if (absTick & 0x100 != 0) ratio = (ratio * 0xfcbe86c7900a88aedcffc83b479aa3a4) >> 128;
            if (absTick & 0x200 != 0) ratio = (ratio * 0xf987a7253ac413176f2b074cf7815e54) >> 128;
            if (absTick & 0x400 != 0) ratio = (ratio * 0xf3392b0822b70005940c7a398e4b70f3) >> 128;
            if (absTick & 0x800 != 0) ratio = (ratio * 0xe7159475a2c29b7443b29c7fa6e889d9) >> 128;
            if (absTick & 0x1000 != 0) ratio = (ratio * 0xd097f3bdfd2022b8845ad8f792aa5825) >> 128;
            if (absTick & 0x2000 != 0) ratio = (ratio * 0xa9f746462d870fdf8a65dc1f90e061e5) >> 128;
            if (absTick & 0x4000 != 0) ratio = (ratio * 0x70d869a156d2a1b890bb3df62baf32f7) >> 128;
            if (absTick & 0x8000 != 0) ratio = (ratio * 0x31be135f97d08fd981231505542fcfa6) >> 128;
            if (absTick & 0x10000 != 0) ratio = (ratio * 0x9aa508b5b7a84e1c677de54f3e99bc9) >> 128;
            if (absTick & 0x20000 != 0) ratio = (ratio * 0x5d6af8dedb81196699c329225ee604) >> 128;
            if (absTick & 0x40000 != 0) ratio = (ratio * 0x2216e584f5fa1ea926041bedfe98) >> 128;
            if (absTick & 0x80000 != 0) ratio = (ratio * 0x48a170391f7dc42444e8fa2) >> 128;

            if (tick > 0) ratio = type(uint256).max / ratio;

            /// @dev this divides by 1<<32 rounding up to go from a Q128.128 to a Q128.96.
            /// @dev we then downcast because we know the result always fits within 160 bits due to our tick input constraint
            /// @dev we round up in the division so getTickAtSqrtRatio of the output price is always consistent
            sqrtPriceX96 = uint160((ratio >> 32) + (ratio % (1 << 32) == 0 ? 0 : 1));
        }
    }

    /// @notice Calculates the greatest tick value such that getRatioAtTick(tick) <= ratio
    /// @dev Throws in case sqrtPriceX96 < MIN_SQRT_RATIO, as MIN_SQRT_RATIO is the lowest value getRatioAtTick may
    /// ever return.
    /// @param sqrtPriceX96 The sqrt ratio for which to compute the tick as a Q64.96
    /// @return tick The greatest tick for which the ratio is less than or equal to the input ratio
    function getTickAtSqrtRatio(uint160 sqrtPriceX96) internal pure returns (int24 tick) {
        unchecked {
            /// @dev second inequality must be < because the price can never reach the price at the max tick
            if (!(sqrtPriceX96 >= MIN_SQRT_RATIO && sqrtPriceX96 < MAX_SQRT_RATIO)) revert R();
            uint256 ratio = uint256(sqrtPriceX96) << 32;

            uint256 r = ratio;
            uint256 msb = 0;

            assembly {
                let f := shl(7, gt(r, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF))
                msb := or(msb, f)
                r := shr(f, r)
            }
            assembly {
                let f := shl(6, gt(r, 0xFFFFFFFFFFFFFFFF))
                msb := or(msb, f)
                r := shr(f, r)
            }
            assembly {
                let f := shl(5, gt(r, 0xFFFFFFFF))
                msb := or(msb, f)
                r := shr(f, r)
            }
            assembly {
                let f := shl(4, gt(r, 0xFFFF))
                msb := or(msb, f)
                r := shr(f, r)
            }
            assembly {
                let f := shl(3, gt(r, 0xFF))
                msb := or(msb, f)
                r := shr(f, r)
            }
            assembly {
                let f := shl(2, gt(r, 0xF))
                msb := or(msb, f)
                r := shr(f, r)
            }
            assembly {
                let f := shl(1, gt(r, 0x3))
                msb := or(msb, f)
                r := shr(f, r)
            }
            assembly {
                let f := gt(r, 0x1)
                msb := or(msb, f)
            }

            if (msb >= 128) r = ratio >> (msb - 127);
            else r = ratio << (127 - msb);

            int256 log_2 = (int256(msb) - 128) << 64;

            assembly {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(63, f))
                r := shr(f, r)
            }
            assembly {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(62, f))
                r := shr(f, r)
            }
            assembly {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(61, f))
                r := shr(f, r)
            }
            assembly {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(60, f))
                r := shr(f, r)
            }
            assembly {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(59, f))
                r := shr(f, r)
            }
            assembly {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(58, f))
                r := shr(f, r)
            }
            assembly {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(57, f))
                r := shr(f, r)
            }
            assembly {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(56, f))
                r := shr(f, r)
            }
            assembly {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(55, f))
                r := shr(f, r)
            }
            assembly {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(54, f))
                r := shr(f, r)
            }
            assembly {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(53, f))
                r := shr(f, r)
            }
            assembly {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(52, f))
                r := shr(f, r)
            }
            assembly {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(51, f))
                r := shr(f, r)
            }
            assembly {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(50, f))
            }

            int256 log_sqrt10001 = log_2 * 255738958999603826347141; /// @dev 128.128 number

            int24 tickLow = int24((log_sqrt10001 - 3402992956809132418596140100660247210) >> 128);
            int24 tickHi = int24((log_sqrt10001 + 291339464771989622907027621153398088495) >> 128);

            tick = tickLow == tickHi
                ? tickLow
                : getSqrtRatioAtTick(tickHi) <= sqrtPriceX96
                    ? tickHi
                    : tickLow;
        }
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

import {IRamsesV3PoolImmutables} from './pool/IRamsesV3PoolImmutables.sol';
import {IRamsesV3PoolState} from './pool/IRamsesV3PoolState.sol';
import {IRamsesV3PoolDerivedState} from './pool/IRamsesV3PoolDerivedState.sol';
import {IRamsesV3PoolActions} from './pool/IRamsesV3PoolActions.sol';
import {IRamsesV3PoolOwnerActions} from './pool/IRamsesV3PoolOwnerActions.sol';
import {IRamsesV3PoolErrors} from './pool/IRamsesV3PoolErrors.sol';
import {IRamsesV3PoolEvents} from './pool/IRamsesV3PoolEvents.sol';

/// @title The interface for a Ramses V3 Pool
/// @notice A Ramses pool facilitates swapping and automated market making between any two assets that strictly conform
/// to the ERC20 specification
/// @dev The pool interface is broken up into many smaller pieces
interface IRamsesV3Pool is
    IRamsesV3PoolImmutables,
    IRamsesV3PoolState,
    IRamsesV3PoolDerivedState,
    IRamsesV3PoolActions,
    IRamsesV3PoolOwnerActions,
    IRamsesV3PoolErrors,
    IRamsesV3PoolEvents
{
    /// @notice if a new period, advance on interaction
    function _advancePeriod() external;
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @dev original UniswapV3 callbacks maintained to ensure seamless integrations

/// @title Callback for IUniswapV3PoolActions#swap
/// @notice Any contract that calls IUniswapV3PoolActions#swap must implement this interface
interface IUniswapV3SwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IUniswapV3Pool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IUniswapV3PoolActions#swap call
    function uniswapV3SwapCallback(int256 amount0Delta, int256 amount1Delta, bytes calldata data) external;
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.7.5;
pragma abicoder v2;

/// @title Quoter Interface
/// @notice Supports quoting the calculated amounts from exact input or exact output swaps
/// @dev These functions are not marked view because they rely on calling non-view functions and reverting
/// to compute the result. They are also not gas efficient and should not be called on-chain.
interface IQuoter {
    /// @notice Returns the amount out received for a given exact input swap without executing the swap
    /// @param path The path of the swap, i.e. each token pair and the pool fee
    /// @param amountIn The amount of the first token to swap
    /// @return amountOut The amount of the last token that would be received
    function quoteExactInput(bytes memory path, uint256 amountIn) external returns (uint256 amountOut);

    /// @notice Returns the amount out received for a given exact input but for a swap of a single pool
    /// @param tokenIn The token being swapped in
    /// @param tokenOut The token being swapped out
    /// @param tickSpacing The tickSpacing of the pool
    /// @param amountIn The desired input amount
    /// @param sqrtPriceLimitX96 The price limit of the pool that cannot be exceeded by the swap
    /// @return amountOut The amount of `tokenOut` that would be received
    function quoteExactInputSingle(
        address tokenIn,
        address tokenOut,
        int24 tickSpacing,
        uint256 amountIn,
        uint160 sqrtPriceLimitX96
    ) external returns (uint256 amountOut);

    /// @notice Returns the amount in required for a given exact output swap without executing the swap
    /// @param path The path of the swap, i.e. each token pair and the pool fee. Path must be provided in reverse order
    /// @param amountOut The amount of the last token to receive
    /// @return amountIn The amount of first token required to be paid
    function quoteExactOutput(bytes memory path, uint256 amountOut) external returns (uint256 amountIn);

    /// @notice Returns the amount in required to receive the given exact output amount but for a swap of a single pool
    /// @param tokenIn The token being swapped in
    /// @param tokenOut The token being swapped out
    /// @param tickSpacing The tickSpacing of the pool
    /// @param amountOut The desired output amount
    /// @param sqrtPriceLimitX96 The price limit of the pool that cannot be exceeded by the swap
    /// @return amountIn The amount required as the input for the swap in order to receive `amountOut`
    function quoteExactOutputSingle(
        address tokenIn,
        address tokenOut,
        int24 tickSpacing,
        uint256 amountOut,
        uint160 sqrtPriceLimitX96
    ) external returns (uint256 amountIn);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.26;

import '../interfaces/IPeripheryImmutableState.sol';

/// @title Immutable state
/// @notice Immutable state used by periphery contracts
abstract contract PeripheryImmutableState is IPeripheryImmutableState {
    /// @inheritdoc IPeripheryImmutableState
    address public immutable override deployer;
    /// @inheritdoc IPeripheryImmutableState
    address public immutable override WETH9;

    constructor(address _deployer, address _WETH9) {
        deployer = _deployer;
        WETH9 = _WETH9;
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.6.0;

import './BytesLib.sol';

/// @title Functions for manipulating path data for multihop swaps
library Path {
    using BytesLib for bytes;

    /// @dev The length of the bytes encoded address
    uint256 private constant ADDR_SIZE = 20;
    /// @dev The length of the bytes encoded fee
    uint256 private constant FEE_SIZE = 3;

    /// @dev The offset of a single token address and pool fee
    uint256 private constant NEXT_OFFSET = ADDR_SIZE + FEE_SIZE;
    /// @dev The offset of an encoded pool key
    uint256 private constant POP_OFFSET = NEXT_OFFSET + ADDR_SIZE;
    /// @dev The minimum length of an encoding that contains 2 or more pools
    uint256 private constant MULTIPLE_POOLS_MIN_LENGTH = POP_OFFSET + NEXT_OFFSET;

    /// @notice Returns true iff the path contains two or more pools
    /// @param path The encoded swap path
    /// @return True if path contains two or more pools, otherwise false
    function hasMultiplePools(bytes memory path) internal pure returns (bool) {
        return path.length >= MULTIPLE_POOLS_MIN_LENGTH;
    }

    /// @notice Returns the number of pools in the path
    /// @param path The encoded swap path
    /// @return The number of pools in the path
    function numPools(bytes memory path) internal pure returns (uint256) {
        /// @dev Ignore the first token address. From then on every fee and token offset indicates a pool.
        return ((path.length - ADDR_SIZE) / NEXT_OFFSET);
    }

    /// @notice Decodes the first pool in path
    /// @param path The bytes encoded swap path
    /// @return tokenA The first token of the given pool
    /// @return tokenB The second token of the given pool
    /// @return tickSpacing The tickSpacing of the pool
    function decodeFirstPool(bytes memory path)
        internal
        pure
        returns (
            address tokenA,
            address tokenB,
            int24 tickSpacing
        )
    {
        tokenA = path.toAddress(0);
        tickSpacing = path.toUint24(ADDR_SIZE);
        tokenB = path.toAddress(NEXT_OFFSET);
    }

    /// @notice Gets the segment corresponding to the first pool in the path
    /// @param path The bytes encoded swap path
    /// @return The segment containing all data necessary to target the first pool in the path
    function getFirstPool(bytes memory path) internal pure returns (bytes memory) {
        return path.slice(0, POP_OFFSET);
    }

    /// @notice Skips a token + fee element from the buffer and returns the remainder
    /// @param path The swap path
    /// @return The remaining token + fee elements in the path
    function skipToken(bytes memory path) internal pure returns (bytes memory) {
        return path.slice(NEXT_OFFSET, path.length - NEXT_OFFSET);
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Provides functions for deriving a pool address from the deployer, tokens, and the fee
library PoolAddress {
    bytes32 internal constant POOL_INIT_CODE_HASH = 0x27c3e2ae1bcb368a6736910a5545ee0e77b18926879503a168ca167c0861fe56;

    error TokenOrder();

    /// @notice The identifying key of the pool
    struct PoolKey {
        address token0;
        address token1;
        int24 tickSpacing;
    }

    /// @notice Returns PoolKey: the ordered tokens with the matched fee levels
    /// @param tokenA The first token of a pool, unsorted
    /// @param tokenB The second token of a pool, unsorted
    /// @param tickSpacing The tickSpacing of the pool
    /// @return Poolkey The pool details with ordered token0 and token1 assignments
    function getPoolKey(address tokenA, address tokenB, int24 tickSpacing) internal pure returns (PoolKey memory) {
        if (tokenA > tokenB) (tokenA, tokenB) = (tokenB, tokenA);
        return PoolKey({token0: tokenA, token1: tokenB, tickSpacing: tickSpacing});
    }

    /// @notice Deterministically computes the pool address given the deployer and PoolKey
    /// @param deployer The Uniswap V3 deployer contract address
    /// @param key The PoolKey
    /// @return pool The contract address of the V3 pool
    function computeAddress(address deployer, PoolKey memory key) internal pure returns (address pool) {
        require(key.token0 < key.token1, TokenOrder());
        pool = address(
            uint160(
                uint256(
                    keccak256(
                        abi.encodePacked(
                            hex'ff',
                            deployer,
                            keccak256(abi.encodePacked(key.token0, key.token1, key.tickSpacing)),
                            POOL_INIT_CODE_HASH
                        )
                    )
                )
            )
        );
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

import '../../core/interfaces/IRamsesV3Pool.sol';
import './PoolAddress.sol';

/// @notice Provides validation for callbacks from Ramses V3 Pools
library CallbackValidation {
    /// @notice Returns the address of a valid Ramses V3 Pool
    /// @param deployer The contract address of the Ramses V3 deployer
    /// @param tokenA The contract address of either token0 or token1
    /// @param tokenB The contract address of the other token
    /// @param tickSpacing The tickSpacing of the pool
    /// @return pool The V3 pool contract address
    function verifyCallback(
        address deployer,
        address tokenA,
        address tokenB,
        int24 tickSpacing
    ) internal view returns (IRamsesV3Pool pool) {
        return verifyCallback(deployer, PoolAddress.getPoolKey(tokenA, tokenB, tickSpacing));
    }

    /// @notice Returns the address of a valid Ramses V3 Pool
    /// @param deployer The contract address of the Ramses V3 deployer
    /// @param poolKey The identifying key of the V3 pool
    /// @return pool The V3 pool contract address
    function verifyCallback(
        address deployer,
        PoolAddress.PoolKey memory poolKey
    ) internal view returns (IRamsesV3Pool pool) {
        pool = IRamsesV3Pool(PoolAddress.computeAddress(deployer, poolKey));
        require(msg.sender == address(pool));
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Pool state that never changes
/// @notice These parameters are fixed for a pool forever, i.e., the methods will always return the same values
interface IRamsesV3PoolImmutables {
    /// @notice The contract that deployed the pool, which must adhere to the IRamsesV3Factory interface
    /// @return The contract address
    function factory() external view returns (address);

    /// @notice The first of the two tokens of the pool, sorted by address
    /// @return The token contract address
    function token0() external view returns (address);

    /// @notice The second of the two tokens of the pool, sorted by address
    /// @return The token contract address
    function token1() external view returns (address);

    /// @notice The pool's fee in hundredths of a bip, i.e. 1e-6
    /// @return The fee
    function fee() external view returns (uint24);

    /// @notice The pool tick spacing
    /// @dev Ticks can only be used at multiples of this value, minimum of 1 and always positive
    /// e.g.: a tickSpacing of 3 means ticks can be initialized every 3rd tick, i.e., ..., -6, -3, 0, 3, 6, ...
    /// This value is an int24 to avoid casting even though it is always positive.
    /// @return The tick spacing
    function tickSpacing() external view returns (int24);

    /// @notice The maximum amount of position liquidity that can use any tick in the range
    /// @dev This parameter is enforced per tick to prevent liquidity from overflowing a uint128 at any point, and
    /// also prevents out-of-range liquidity from being used to prevent adding in-range liquidity to a pool
    /// @return The max amount of liquidity per tick
    function maxLiquidityPerTick() external view returns (uint128);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Pool state that can change
/// @notice These methods compose the pool's state, and can change with any frequency including multiple times
/// per transaction
interface IRamsesV3PoolState {
    /// @notice The 0th storage slot in the pool stores many values, and is exposed as a single method to save gas
    /// when accessed externally.
    /// @return sqrtPriceX96 The current price of the pool as a sqrt(token1/token0) Q64.96 value
    /// @return tick The current tick of the pool, i.e. according to the last tick transition that was run.
    /// This value may not always be equal to SqrtTickMath.getTickAtSqrtRatio(sqrtPriceX96) if the price is on a tick
    /// boundary.
    /// @return observationIndex The index of the last oracle observation that was written,
    /// @return observationCardinality The current maximum number of observations stored in the pool,
    /// @return observationCardinalityNext The next maximum number of observations, to be updated when the observation.
    /// @return feeProtocol The protocol fee for both tokens of the pool.
    /// Encoded as two 4 bit values, where the protocol fee of token1 is shifted 4 bits and the protocol fee of token0
    /// is the lower 4 bits. Used as the denominator of a fraction of the swap fee, e.g. 4 means 1/4th of the swap fee.
    /// unlocked Whether the pool is currently locked to reentrancy
    function slot0()
        external
        view
        returns (
            uint160 sqrtPriceX96,
            int24 tick,
            uint16 observationIndex,
            uint16 observationCardinality,
            uint16 observationCardinalityNext,
            uint8 feeProtocol,
            bool unlocked
        );

    /// @notice The fee growth as a Q128.128 fees of token0 collected per unit of liquidity for the entire life of the pool
    /// @dev This value can overflow the uint256
    function feeGrowthGlobal0X128() external view returns (uint256);

    /// @notice The fee growth as a Q128.128 fees of token1 collected per unit of liquidity for the entire life of the pool
    /// @dev This value can overflow the uint256
    function feeGrowthGlobal1X128() external view returns (uint256);

    /// @notice The amounts of token0 and token1 that are owed to the protocol
    /// @dev Protocol fees will never exceed uint128 max in either token
    function protocolFees() external view returns (uint128 token0, uint128 token1);

    /// @notice The currently in range liquidity available to the pool
    /// @dev This value has no relationship to the total liquidity across all ticks
    /// @return The liquidity at the current price of the pool
    function liquidity() external view returns (uint128);

    /// @notice Look up information about a specific tick in the pool
    /// @param tick The tick to look up
    /// @return liquidityGross the total amount of position liquidity that uses the pool either as tick lower or
    /// tick upper
    /// @return liquidityNet how much liquidity changes when the pool price crosses the tick,
    /// @return feeGrowthOutside0X128 the fee growth on the other side of the tick from the current tick in token0,
    /// @return feeGrowthOutside1X128 the fee growth on the other side of the tick from the current tick in token1,
    /// @return tickCumulativeOutside the cumulative tick value on the other side of the tick from the current tick
    /// @return secondsPerLiquidityOutsideX128 the seconds spent per liquidity on the other side of the tick from the current tick,
    /// @return secondsOutside the seconds spent on the other side of the tick from the current tick,
    /// @return initialized Set to true if the tick is initialized, i.e. liquidityGross is greater than 0, otherwise equal to false.
    /// Outside values can only be used if the tick is initialized, i.e. if liquidityGross is greater than 0.
    /// In addition, these values are only relative and must be used only in comparison to previous snapshots for
    /// a specific position.
    function ticks(
        int24 tick
    )
        external
        view
        returns (
            uint128 liquidityGross,
            int128 liquidityNet,
            uint256 feeGrowthOutside0X128,
            uint256 feeGrowthOutside1X128,
            int56 tickCumulativeOutside,
            uint160 secondsPerLiquidityOutsideX128,
            uint32 secondsOutside,
            bool initialized
        );

    /// @notice Returns 256 packed tick initialized boolean values. See TickBitmap for more information
    function tickBitmap(int16 wordPosition) external view returns (uint256);

    /// @notice Returns the information about a position by the position's key
    /// @param key The position's key is a hash of a preimage composed by the owner, tickLower and tickUpper
    /// @return liquidity The amount of liquidity in the position,
    /// @return feeGrowthInside0LastX128 fee growth of token0 inside the tick range as of the last mint/burn/poke,
    /// @return feeGrowthInside1LastX128 fee growth of token1 inside the tick range as of the last mint/burn/poke,
    /// @return tokensOwed0 the computed amount of token0 owed to the position as of the last mint/burn/poke,
    /// @return tokensOwed1 the computed amount of token1 owed to the position as of the last mint/burn/poke
    function positions(
        bytes32 key
    )
        external
        view
        returns (
            uint128 liquidity,
            uint256 feeGrowthInside0LastX128,
            uint256 feeGrowthInside1LastX128,
            uint128 tokensOwed0,
            uint128 tokensOwed1
        );

    /// @notice Returns data about a specific observation index
    /// @param index The element of the observations array to fetch
    /// @dev You most likely want to use #observe() instead of this method to get an observation as of some amount of time
    /// ago, rather than at a specific index in the array.
    /// @return blockTimestamp The timestamp of the observation,
    /// @return tickCumulative the tick multiplied by seconds elapsed for the life of the pool as of the observation timestamp,
    /// @return secondsPerLiquidityCumulativeX128 the seconds per in range liquidity for the life of the pool as of the observation timestamp,
    /// @return initialized whether the observation has been initialized and the values are safe to use
    function observations(
        uint256 index
    )
        external
        view
        returns (
            uint32 blockTimestamp,
            int56 tickCumulative,
            uint160 secondsPerLiquidityCumulativeX128,
            bool initialized
        );


    /// @notice get the period seconds in range of a specific position
    /// @param period the period number
    /// @param owner owner address
    /// @param index position index
    /// @param tickLower lower bound of range
    /// @param tickUpper upper bound of range
    /// @return periodSecondsInsideX96 seconds the position was not in range for the period
    function positionPeriodSecondsInRange(
        uint256 period,
        address owner,
        uint256 index,
        int24 tickLower,
        int24 tickUpper
    ) external view returns (uint256 periodSecondsInsideX96);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Pool state that is not stored
/// @notice Contains view functions to provide information about the pool that is computed rather than stored on the
/// blockchain. The functions here may have variable gas costs.
interface IRamsesV3PoolDerivedState {
    /// @notice Returns the cumulative tick and liquidity as of each timestamp `secondsAgo` from the current block timestamp
    /// @dev To get a time weighted average tick or liquidity-in-range, you must call this with two values, one representing
    /// the beginning of the period and another for the end of the period. E.g., to get the last hour time-weighted average tick,
    /// you must call it with secondsAgos = [3600, 0].
    /// @dev The time weighted average tick represents the geometric time weighted average price of the pool, in
    /// log base sqrt(1.0001) of token1 / token0. The TickMath library can be used to go from a tick value to a ratio.
    /// @param secondsAgos From how long ago each cumulative tick and liquidity value should be returned
    /// @return tickCumulatives Cumulative tick values as of each `secondsAgos` from the current block timestamp
    /// @return secondsPerLiquidityCumulativeX128s Cumulative seconds per liquidity-in-range value as of each `secondsAgos` from the current block
    /// timestamp
    function observe(
        uint32[] calldata secondsAgos
    ) external view returns (int56[] memory tickCumulatives, uint160[] memory secondsPerLiquidityCumulativeX128s);

    /// @notice Returns a snapshot of the tick cumulative, seconds per liquidity and seconds inside a tick range
    /// @dev Snapshots must only be compared to other snapshots, taken over a period for which a position existed.
    /// I.e., snapshots cannot be compared if a position is not held for the entire period between when the first
    /// snapshot is taken and the second snapshot is taken.
    /// @param tickLower The lower tick of the range
    /// @param tickUpper The upper tick of the range
    /// @return tickCumulativeInside The snapshot of the tick accumulator for the range
    /// @return secondsPerLiquidityInsideX128 The snapshot of seconds per liquidity for the range
    /// @return secondsInside The snapshot of seconds per liquidity for the range
    function snapshotCumulativesInside(
        int24 tickLower,
        int24 tickUpper
    ) external view returns (int56 tickCumulativeInside, uint160 secondsPerLiquidityInsideX128, uint32 secondsInside);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Permissionless pool actions
/// @notice Contains pool methods that can be called by anyone
interface IRamsesV3PoolActions {
    /// @notice Sets the initial price for the pool
    /// @dev Price is represented as a sqrt(amountToken1/amountToken0) Q64.96 value
    /// @param sqrtPriceX96 the initial sqrt price of the pool as a Q64.96
    function initialize(uint160 sqrtPriceX96) external;

    /// @notice Adds liquidity for the given recipient/tickLower/tickUpper position
    /// @dev The caller of this method receives a callback in the form of IUniswapV3MintCallback#uniswapV3MintCallback
    /// in which they must pay any token0 or token1 owed for the liquidity. The amount of token0/token1 due depends
    /// on tickLower, tickUpper, the amount of liquidity, and the current price.
    /// @param recipient The address for which the liquidity will be created
    /// @param index The index for which the liquidity will be created
    /// @param tickLower The lower tick of the position in which to add liquidity
    /// @param tickUpper The upper tick of the position in which to add liquidity
    /// @param amount The amount of liquidity to mint
    /// @param data Any data that should be passed through to the callback
    /// @return amount0 The amount of token0 that was paid to mint the given amount of liquidity. Matches the value in the callback
    /// @return amount1 The amount of token1 that was paid to mint the given amount of liquidity. Matches the value in the callback
    function mint(
        address recipient,
        uint256 index,
        int24 tickLower,
        int24 tickUpper,
        uint128 amount,
        bytes calldata data
    ) external returns (uint256 amount0, uint256 amount1);

    /// @notice Collects tokens owed to a position
    /// @dev Does not recompute fees earned, which must be done either via mint or burn of any amount of liquidity.
    /// Collect must be called by the position owner. To withdraw only token0 or only token1, amount0Requested or
    /// amount1Requested may be set to zero. To withdraw all tokens owed, caller may pass any value greater than the
    /// actual tokens owed, e.g. type(uint128).max. Tokens owed may be from accumulated swap fees or burned liquidity.
    /// @param recipient The address which should receive the fees collected
    /// @param index The index of the position to be collected
    /// @param tickLower The lower tick of the position for which to collect fees
    /// @param tickUpper The upper tick of the position for which to collect fees
    /// @param amount0Requested How much token0 should be withdrawn from the fees owed
    /// @param amount1Requested How much token1 should be withdrawn from the fees owed
    /// @return amount0 The amount of fees collected in token0
    /// @return amount1 The amount of fees collected in token1
    function collect(
        address recipient,
        uint256 index,
        int24 tickLower,
        int24 tickUpper,
        uint128 amount0Requested,
        uint128 amount1Requested
    ) external returns (uint128 amount0, uint128 amount1);

    /// @notice Burn liquidity from the sender and account tokens owed for the liquidity to the position
    /// @dev Can be used to trigger a recalculation of fees owed to a position by calling with an amount of 0
    /// @dev Fees must be collected separately via a call to #collect
    /// @param index The index for which the liquidity will be burned
    /// @param tickLower The lower tick of the position for which to burn liquidity
    /// @param tickUpper The upper tick of the position for which to burn liquidity
    /// @param amount How much liquidity to burn
    /// @return amount0 The amount of token0 sent to the recipient
    /// @return amount1 The amount of token1 sent to the recipient
    function burn(
        uint256 index,
        int24 tickLower,
        int24 tickUpper,
        uint128 amount
    ) external returns (uint256 amount0, uint256 amount1);

    /// @notice Swap token0 for token1, or token1 for token0
    /// @dev The caller of this method receives a callback in the form of IUniswapV3SwapCallback#uniswapV3SwapCallback
    /// @param recipient The address to receive the output of the swap
    /// @param zeroForOne The direction of the swap, true for token0 to token1, false for token1 to token0
    /// @param amountSpecified The amount of the swap, which implicitly configures the swap as exact input (positive), or exact output (negative)
    /// @param sqrtPriceLimitX96 The Q64.96 sqrt price limit. If zero for one, the price cannot be less than this
    /// value after the swap. If one for zero, the price cannot be greater than this value after the swap
    /// @param data Any data to be passed through to the callback
    /// @return amount0 The delta of the balance of token0 of the pool, exact when negative, minimum when positive
    /// @return amount1 The delta of the balance of token1 of the pool, exact when negative, minimum when positive
    function swap(
        address recipient,
        bool zeroForOne,
        int256 amountSpecified,
        uint160 sqrtPriceLimitX96,
        bytes calldata data
    ) external returns (int256 amount0, int256 amount1);

    
    /// @notice Receive token0 and/or token1 and pay it back, plus a fee, in the callback
    /// @dev The caller of this method receives a callback in the form of IUniswapV3FlashCallback#uniswapV3FlashCallback
    /// @dev Can be used to donate underlying tokens pro-rata to currently in-range liquidity providers by calling
    /// with 0 amount{0,1} and sending the donation amount(s) from the callback
    /// @param recipient The address which will receive the token0 and token1 amounts
    /// @param amount0 The amount of token0 to send
    /// @param amount1 The amount of token1 to send
    /// @param data Any data to be passed through to the callback
    function flash(
        address recipient,
        uint256 amount0,
        uint256 amount1,
        bytes calldata data
    ) external;
    

    /// @notice Increase the maximum number of price and liquidity observations that this pool will store
    /// @dev This method is no-op if the pool already has an observationCardinalityNext greater than or equal to
    /// the input observationCardinalityNext.
    /// @param observationCardinalityNext The desired minimum number of observations for the pool to store
    function increaseObservationCardinalityNext(uint16 observationCardinalityNext) external;
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Permissioned pool actions
/// @notice Contains pool methods that may only be called by the factory owner
interface IRamsesV3PoolOwnerActions {
    /// @notice Set the denominator of the protocol's % share of the fees
    function setFeeProtocol() external;

    /// @notice Collect the protocol fee accrued to the pool
    /// @param recipient The address to which collected protocol fees should be sent
    /// @param amount0Requested The maximum amount of token0 to send, can be 0 to collect fees in only token1
    /// @param amount1Requested The maximum amount of token1 to send, can be 0 to collect fees in only token0
    /// @return amount0 The protocol fee collected in token0
    /// @return amount1 The protocol fee collected in token1
    function collectProtocol(
        address recipient,
        uint128 amount0Requested,
        uint128 amount1Requested
    ) external returns (uint128 amount0, uint128 amount1);

    function setFee(uint24 _fee) external;
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Errors emitted by a pool
/// @notice Contains all events emitted by the pool
interface IRamsesV3PoolErrors {
    error LOK();
    error TLU();
    error TLM();
    error TUM();
    error AI();
    error M0();
    error M1();
    error AS();
    error IIA();
    error L();
    error F0();
    error F1();
    error SPL();
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Events emitted by a pool
/// @notice Contains all events emitted by the pool
interface IRamsesV3PoolEvents {
    /// @notice Emitted exactly once by a pool when #initialize is first called on the pool
    /// @dev Mint/Burn/Swap cannot be emitted by the pool before Initialize
    /// @param sqrtPriceX96 The initial sqrt price of the pool, as a Q64.96
    /// @param tick The initial tick of the pool, i.e. log base 1.0001 of the starting price of the pool
    event Initialize(uint160 sqrtPriceX96, int24 tick);

    /// @notice Emitted when liquidity is minted for a given position
    /// @param sender The address that minted the liquidity
    /// @param owner The owner of the position and recipient of any minted liquidity
    /// @param tickLower The lower tick of the position
    /// @param tickUpper The upper tick of the position
    /// @param amount The amount of liquidity minted to the position range
    /// @param amount0 How much token0 was required for the minted liquidity
    /// @param amount1 How much token1 was required for the minted liquidity
    event Mint(
        address sender,
        address indexed owner,
        int24 indexed tickLower,
        int24 indexed tickUpper,
        uint128 amount,
        uint256 amount0,
        uint256 amount1
    );

    /// @notice Emitted when fees are collected by the owner of a position
    /// @dev Collect events may be emitted with zero amount0 and amount1 when the caller chooses not to collect fees
    /// @param owner The owner of the position for which fees are collected
    /// @param tickLower The lower tick of the position
    /// @param tickUpper The upper tick of the position
    /// @param amount0 The amount of token0 fees collected
    /// @param amount1 The amount of token1 fees collected
    event Collect(
        address indexed owner,
        address recipient,
        int24 indexed tickLower,
        int24 indexed tickUpper,
        uint128 amount0,
        uint128 amount1
    );

    /// @notice Emitted when a position's liquidity is removed
    /// @dev Does not withdraw any fees earned by the liquidity position, which must be withdrawn via #collect
    /// @param owner The owner of the position for which liquidity is removed
    /// @param tickLower The lower tick of the position
    /// @param tickUpper The upper tick of the position
    /// @param amount The amount of liquidity to remove
    /// @param amount0 The amount of token0 withdrawn
    /// @param amount1 The amount of token1 withdrawn
    event Burn(
        address indexed owner,
        int24 indexed tickLower,
        int24 indexed tickUpper,
        uint128 amount,
        uint256 amount0,
        uint256 amount1
    );

    /// @notice Emitted by the pool for any swaps between token0 and token1
    /// @param sender The address that initiated the swap call, and that received the callback
    /// @param recipient The address that received the output of the swap
    /// @param amount0 The delta of the token0 balance of the pool
    /// @param amount1 The delta of the token1 balance of the pool
    /// @param sqrtPriceX96 The sqrt(price) of the pool after the swap, as a Q64.96
    /// @param liquidity The liquidity of the pool after the swap
    /// @param tick The log base 1.0001 of price of the pool after the swap
    event Swap(
        address indexed sender,
        address indexed recipient,
        int256 amount0,
        int256 amount1,
        uint160 sqrtPriceX96,
        uint128 liquidity,
        int24 tick
    );

    /// @notice Emitted by the pool for any flashes of token0/token1
    /// @param sender The address that initiated the swap call, and that received the callback
    /// @param recipient The address that received the tokens from flash
    /// @param amount0 The amount of token0 that was flashed
    /// @param amount1 The amount of token1 that was flashed
    /// @param paid0 The amount of token0 paid for the flash, which can exceed the amount0 plus the fee
    /// @param paid1 The amount of token1 paid for the flash, which can exceed the amount1 plus the fee
    event Flash(
        address indexed sender,
        address indexed recipient,
        uint256 amount0,
        uint256 amount1,
        uint256 paid0,
        uint256 paid1
    );

    /// @notice Emitted by the pool for increases to the number of observations that can be stored
    /// @dev observationCardinalityNext is not the observation cardinality until an observation is written at the index
    /// just before a mint/swap/burn.
    /// @param observationCardinalityNextOld The previous value of the next observation cardinality
    /// @param observationCardinalityNextNew The updated value of the next observation cardinality
    event IncreaseObservationCardinalityNext(
        uint16 observationCardinalityNextOld,
        uint16 observationCardinalityNextNew
    );

    /// @notice Emitted when the protocol fee is changed by the pool
    /// @param feeProtocol0Old The previous value of the token0 protocol fee
    /// @param feeProtocol1Old The previous value of the token1 protocol fee
    /// @param feeProtocol0New The updated value of the token0 protocol fee
    /// @param feeProtocol1New The updated value of the token1 protocol fee
    event SetFeeProtocol(uint8 feeProtocol0Old, uint8 feeProtocol1Old, uint8 feeProtocol0New, uint8 feeProtocol1New);

    /// @notice Emitted when the collected protocol fees are withdrawn by the factory owner
    /// @param sender The address that collects the protocol fees
    /// @param recipient The address that receives the collected protocol fees
    /// @param amount0 The amount of token0 protocol fees that is withdrawn
    /// @param amount0 The amount of token1 protocol fees that is withdrawn
    event CollectProtocol(address indexed sender, address indexed recipient, uint128 amount0, uint128 amount1);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Immutable state
/// @notice Functions that return immutable state of the router
interface IPeripheryImmutableState {
    /// @return Returns the address of the Uniswap V3 deployer
    function deployer() external view returns (address);

    /// @return Returns the address of WETH9
    function WETH9() external view returns (address);
}

// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * @title Solidity Bytes Arrays Utils
 * @author Gonçalo Sá <[email protected]>
 *
 * @dev Bytes tightly packed arrays utility library for ethereum contracts written in Solidity.
 *      The library lets you concatenate, slice and type cast bytes arrays both in memory and storage.
 */
pragma solidity >=0.8.0 <0.9.0;

library BytesLib {
    /// @notice merging errors between functions, might change
    error Overflow();
    error OutOfBounds();

    function slice(bytes memory _bytes, uint256 _start, uint256 _length) internal pure returns (bytes memory) {
        if (_length + 31 < _length) revert Overflow();
        if (_bytes.length < _start + _length) revert OutOfBounds();

        bytes memory tempBytes;

        assembly {
            switch iszero(_length)
            case 0 {
                // Get a location of some free memory and store it in tempBytes as
                // Solidity does for memory variables.
                tempBytes := mload(0x40)

                // The first word of the slice result is potentially a partial
                // word read from the original array. To read it, we calculate
                // the length of that partial word and start copying that many
                // bytes into the array. The first word we copy will start with
                // data we don't care about, but the last `lengthmod` bytes will
                // land at the beginning of the contents of the new array. When
                // we're done copying, we overwrite the full first word with
                // the actual length of the slice.
                let lengthmod := and(_length, 31)

                // The multiplication in the next line is necessary
                // because when slicing multiples of 32 bytes (lengthmod == 0)
                // the following copy loop was copying the origin's length
                // and then ending prematurely not copying everything it should.
                let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
                let end := add(mc, _length)

                for {
                    // The multiplication in the next line has the same exact purpose
                    // as the one above.
                    let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
                } lt(mc, end) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    mstore(mc, mload(cc))
                }

                mstore(tempBytes, _length)

                //update free-memory pointer
                //allocating the array padded to 32 bytes like the compiler does now
                mstore(0x40, and(add(mc, 31), not(31)))
            }
            //if we want a zero-length slice let's just return a zero-length array
            default {
                tempBytes := mload(0x40)
                //zero out the 32 bytes slice we are about to return
                //we need to do it because Solidity does not garbage collect
                mstore(tempBytes, 0)

                mstore(0x40, add(tempBytes, 0x20))
            }
        }

        return tempBytes;
    }

    function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
        if (_bytes.length < _start + 20) revert OutOfBounds();
        address tempAddress;

        assembly {
            tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
        }

        return tempAddress;
    }

    /// @notice this is actually toInt24 now
    function toUint24(bytes memory _bytes, uint256 _start) internal pure returns (int24) {
        if (_start + 3 < _start) revert Overflow();
        if (_bytes.length < _start + 3) revert OutOfBounds();
        int24 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x3), _start))
        }

        return tempUint;
    }
}

{
  "remappings": [
    "@openzeppelin-contracts-upgradeable-5.1.0/=dependencies/@openzeppelin-contracts-upgradeable-5.1.0/",
    "@openzeppelin/contracts/=dependencies/@openzeppelin-contracts-5.1.0/",
    "forge-std/=dependencies/forge-std-1.9.4/src/",
    "permit2/=lib/permit2/",
    "@openzeppelin-3.4.2/=node_modules/@openzeppelin-3.4.2/",
    "@openzeppelin-contracts-5.1.0/=dependencies/@openzeppelin-contracts-5.1.0/",
    "@uniswap/=node_modules/@uniswap/",
    "base64-sol/=node_modules/base64-sol/",
    "eth-gas-reporter/=node_modules/eth-gas-reporter/",
    "forge-std-1.9.4/=dependencies/forge-std-1.9.4/src/",
    "hardhat/=node_modules/hardhat/",
    "solmate/=node_modules/solmate/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 2000
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "cancun",
  "viaIR": true,
  "libraries": {
    "contracts/CL/periphery/libraries/NFTDescriptor.sol": {
      "NFTDescriptor": "0x276522eAc12a538EC588bdee6bD8045924d425F5"
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_deployer","type":"address"},{"internalType":"address","name":"_WETH9","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"OutOfBounds","type":"error"},{"inputs":[],"name":"Overflow","type":"error"},{"inputs":[],"name":"TokenOrder","type":"error"},{"inputs":[],"name":"WETH9","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"deployer","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes","name":"path","type":"bytes"},{"internalType":"uint256","name":"amountIn","type":"uint256"}],"name":"quoteExactInput","outputs":[{"internalType":"uint256","name":"amountOut","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"tokenIn","type":"address"},{"internalType":"address","name":"tokenOut","type":"address"},{"internalType":"int24","name":"tickSpacing","type":"int24"},{"internalType":"uint256","name":"amountIn","type":"uint256"},{"internalType":"uint160","name":"sqrtPriceLimitX96","type":"uint160"}],"name":"quoteExactInputSingle","outputs":[{"internalType":"uint256","name":"amountOut","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes","name":"path","type":"bytes"},{"internalType":"uint256","name":"amountOut","type":"uint256"}],"name":"quoteExactOutput","outputs":[{"internalType":"uint256","name":"amountIn","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"tokenIn","type":"address"},{"internalType":"address","name":"tokenOut","type":"address"},{"internalType":"int24","name":"tickSpacing","type":"int24"},{"internalType":"uint256","name":"amountOut","type":"uint256"},{"internalType":"uint160","name":"sqrtPriceLimitX96","type":"uint160"}],"name":"quoteExactOutputSingle","outputs":[{"internalType":"uint256","name":"amountIn","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"int256","name":"amount0Delta","type":"int256"},{"internalType":"int256","name":"amount1Delta","type":"int256"},{"internalType":"bytes","name":"path","type":"bytes"}],"name":"uniswapV3SwapCallback","outputs":[],"stateMutability":"view","type":"function"}]

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

0000000000000000000000004c0a98ef13e29fcf8544256007bdf58c58bea3b6000000000000000000000000039e2fb66102314ce7b64ce5ce3e5183bc94ad38

-----Decoded View---------------
Arg [0] : _deployer (address): 0x4C0A98eF13e29FCF8544256007Bdf58c58bEa3b6
Arg [1] : _WETH9 (address): 0x039e2fB66102314Ce7b64Ce5Ce3E5183bc94aD38

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 0000000000000000000000004c0a98ef13e29fcf8544256007bdf58c58bea3b6
Arg [1] : 000000000000000000000000039e2fb66102314ce7b64ce5ce3e5183bc94ad38