Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;

import {IReserveInterestRateStrategy} from "../../interfaces/IReserveInterestRateStrategy.sol";
import {WadRayMath} from "../../protocol/libraries/math/WadRayMath.sol";
import {PercentageMath} from "../../protocol/libraries/math/PercentageMath.sol";
import {ILendingPoolAddressesProvider} from "../../interfaces/ILendingPoolAddressesProvider.sol";
import {IAToken} from "../../interfaces/IAToken.sol";
import {IVariableDebtToken} from "../../interfaces/IVariableDebtToken.sol";
import {VariableDebtToken} from "../../protocol/tokenization/VariableDebtToken.sol";
import {ILendingPool} from "../../interfaces/ILendingPool.sol";
import {DataTypes} from "../../protocol/libraries/types/DataTypes.sol";
import {ReserveConfiguration} from "../../protocol/libraries/configuration/ReserveConfiguration.sol";
import {Ownable} from "../../dependencies/openzeppelin/contracts/Ownable.sol";
import {SafeMath} from '../../dependencies/openzeppelin/contracts/SafeMath.sol';
import {SignedSafeMath} from '../../dependencies/openzeppelin/contracts/SignedSafeMath.sol';
import {IERC20} from '../../dependencies/openzeppelin/contracts/IERC20.sol';

/**
 * @title PiReserveInterestRateStrategy contract
 * @notice Implements the calculation of the interest rates using control theory.
 * @dev The model of interest rate is based Proportional Integrator (PI).
 * Admin needs to set an optimal utilization rate and this strategy will automatically
 * automatically adjust the interest rate according to the `Kp` and `Ki` variables.
 * @dev ATTENTION, this contract must no be used as a library. One PiReserveInterestRateStrategy
 * needs to be associated with only one market.
 * @dev ATTENTION STABLE RATES MUST BE DISABLED, this startegy doesn't support stable rate debt. 
 * @author ByteMasons
 */
contract PiReserveInterestRateStrategy is IReserveInterestRateStrategy, Ownable {
    using WadRayMath for uint256;
    using WadRayMath for int256;
    using SafeMath for uint256;
    using SignedSafeMath for int256;
    using PercentageMath for uint256;

    ILendingPoolAddressesProvider public immutable _addressesProvider;
    address public immutable _asset; // This strategy contract needs to be associated to a unique market.

    int256 public constant M_FACTOR = 120e25;
    uint256 public constant N_FACTOR = 4;
    int256 public constant RAY = 1e27;
    int256 public constant MIN_INT256 = -2**255;
    int256 public constant MAX_INT256 = 2**255-1;

    int256 public _minControllerError;
    int256 public _maxErrIAmp;
    uint256 public _optimalUtilizationRate;

    // P
    uint256 public _kp; // in RAY

    // I
    uint256 public _ki; // in RAY
    uint256 public _lastTimestamp;
    int256 public _errI;

    // Events
    event PidLog(
        uint256 utilizationRate, 
        uint256 currentLiquidityRate, 
        uint256 currentVariableBorrowRate, 
        int256 err, 
        int256 controllerErr
    );

    constructor(
        ILendingPoolAddressesProvider provider,
        address asset,
        int256 minControllerError,
        int256 maxITimeAmp,
        uint256 optimalUtilizationRate,
        uint256 kp,
        uint256 ki        
    ) public {
        require(optimalUtilizationRate < uint256(RAY), "optimalUtilizationRate_GT_100%");
        _optimalUtilizationRate = optimalUtilizationRate;
        _asset = asset;
        _addressesProvider = provider;
        _kp = kp;
        _ki = ki;
        _lastTimestamp = block.timestamp;
        _minControllerError = minControllerError;
        _maxErrIAmp = int256(_ki).rayMulInt(-RAY.mul(maxITimeAmp));

        require(transferFunction(MIN_INT256) >= 0, "BASE_BORROW_RATE_CANT_BE_NEGATIVE");
    }
    
    // ----------- admin -----------

    function setOptimalUtilizationRate(uint256 optimalUtilizationRate) external onlyOwner {
        require(optimalUtilizationRate < uint256(RAY), "optimalUtilizationRate_GT_100%");
        _optimalUtilizationRate = optimalUtilizationRate;
    }

    function setMinControllerError(int256 minControllerError) external onlyOwner {
        _minControllerError = minControllerError;
        require(transferFunction(MIN_INT256) >= 0, "BASE_BORROW_RATE_CANT_BE_NEGATIVE");
    }

    function setPidValues(uint256 kp, uint256 ki, int256 maxITimeAmp) external onlyOwner {
        _kp = kp;
        _ki = ki;
        _maxErrIAmp = int256(_ki).rayMulInt(-RAY.mul(maxITimeAmp));
    }

    // ----------- external -----------

    /**
     * @dev Calculates the interest rates depending on the reserve's state and configurations
     * @param reserve The address of the reserve
     * @param liquidityAdded The liquidity added during the operation
     * @param liquidityTaken The liquidity taken during the operation
     * @param totalVariableDebt The total borrowed from the reserve at a variable rate
     * @param reserveFactor The reserve portion of the interest that goes to the treasury of the market
     * @return The liquidity rate and the variable borrow rate
     *
     */
    function calculateInterestRates(
        address reserve,
        address aToken,
        uint256 liquidityAdded, //! since this function is not view anymore we need to make sure liquidityAdded is added at the end
        uint256 liquidityTaken, //! since this function is not view anymore we need to make sure liquidityTaken is removed at the end
        uint256,
        uint256 totalVariableDebt,
        uint256,
        uint256 reserveFactor
    ) external override returns (uint256, uint256, uint256) {
        uint256 availableLiquidity = IERC20(reserve).balanceOf(aToken);
        availableLiquidity = availableLiquidity.add(liquidityAdded).sub(liquidityTaken);
        return calculateInterestRates(address(0), availableLiquidity, 0, totalVariableDebt, 0, reserveFactor);
    }

    /**
     * @dev Calculates the interest rates depending on the reserve's state and configurations.
     * NOTE This function is kept for compatibility with the previous DefaultInterestRateStrategy interface.
     * New protocol implementation uses the new calculateInterestRates() interface
     * @param availableLiquidity The liquidity available in the corresponding aToken
     * @param totalVariableDebt The total borrowed from the reserve at a variable rate
     * @param reserveFactor The reserve portion of the interest that goes to the treasury of the market
     * @return The liquidity rate, the stable borrow rate and the variable borrow rate
     */
    function calculateInterestRates(
        address,
        uint256 availableLiquidity,
        uint256,
        uint256 totalVariableDebt,
        uint256,
        uint256 reserveFactor
    ) public override returns (uint256, uint256, uint256) {
        require(msg.sender == _addressesProvider.getLendingPool(), "ACCESS_RESTRICTED_TO_LENDING_POOL");

        uint256 utilizationRate =
            totalVariableDebt == 0 ? 0 : totalVariableDebt.rayDiv(availableLiquidity.add(totalVariableDebt));

        // If no borrowers we reset the strategy
        if (utilizationRate == 0) {
            _errI = 0;
            _lastTimestamp = block.timestamp;
            return (0, 0, 0);
        }

        // PID state update
        int256 err = getNormalizedError(utilizationRate);
        _errI = _errI.add(int256(_ki).rayMulInt(err.mul(int256(block.timestamp.sub(_lastTimestamp)))));
        if (_errI < _maxErrIAmp) _errI = _maxErrIAmp; // Limit _errI negative accumulation.
        _lastTimestamp = block.timestamp;

        int256 controllerErr = getControllerError(err);
        uint256 currentVariableBorrowRate = transferFunction(controllerErr);
        uint256 currentLiquidityRate = getLiquidityRate(currentVariableBorrowRate, utilizationRate, reserveFactor);

        emit PidLog(utilizationRate, currentLiquidityRate, currentVariableBorrowRate, err, controllerErr);

        //! Stable rate set is 0 => Stable debt disable on the aave V2 market
        return (currentLiquidityRate, 0, currentVariableBorrowRate);
    }

    // ----------- view -----------

    /**
     * @notice The view version of `calculateInterestRates()`.
     * @return currentLiquidityRate
     * @return currentStableBorrowRate
     * @return currentVariableBorrowRate
     * @return utilizationRate
     */
    function getCurrentInterestRates() public view returns (uint256, uint256, uint256, uint256) {
        // utilization
        DataTypes.ReserveData memory reserve =
            ILendingPool(_addressesProvider.getLendingPool()).getReserveData(_asset);
        uint256 availableLiquidity = IERC20(_asset).balanceOf(reserve.aTokenAddress);
        uint256 totalVariableDebt =
            IVariableDebtToken(reserve.variableDebtTokenAddress).scaledTotalSupply().rayMul(reserve.variableBorrowIndex);
        uint256 utilizationRate =
            totalVariableDebt == 0 ? 0 : totalVariableDebt.rayDiv(availableLiquidity.add(totalVariableDebt));

        // borrow rate
        uint256 currentVariableBorrowRate = transferFunction(getControllerError(getNormalizedError(utilizationRate)));

        // liquity rate
        uint256 currentLiquidityRate =
            getLiquidityRate(currentVariableBorrowRate, utilizationRate, getReserveFactor(reserve.configuration));

        return (currentLiquidityRate, 0, currentVariableBorrowRate, utilizationRate);
    }

    function baseVariableBorrowRate() public view override returns (uint256) {
        return uint256(transferFunction(MIN_INT256));
    }

    function getMaxVariableBorrowRate() external view override returns (uint256) {
        return uint256(MAX_INT256);
    }

    // ----------- helpers -----------

    /**
     * @dev normalize the err:
     * utilizationRate ⊂ [0, Uo]   => err ⊂ [-RAY, 0]
     * utilizationRate ⊂ [Uo, RAY] => err ⊂ [0, RAY]
     * With Uo = optimal rate
     */
    function getNormalizedError(uint256 utilizationRate) internal view returns (int256) {
        int256 err = int256(utilizationRate).sub(int256(_optimalUtilizationRate));
        if (int256(utilizationRate) < int256(_optimalUtilizationRate)) {
            return err.rayDivInt(int256(_optimalUtilizationRate));
        } else {
            return err.rayDivInt(RAY.sub(int256(_optimalUtilizationRate)));
        }
    }

    /// @dev Process the liquidity rate from the variable borrow rate.
    function getLiquidityRate(uint256 currentVariableBorrowRate, uint256 utilizationRate, uint256 reserveFactor)
        internal
        pure
        returns (uint256)
    {
        return currentVariableBorrowRate.rayMul(utilizationRate).percentMul(
            PercentageMath.PERCENTAGE_FACTOR.sub(reserveFactor)
        );
    }

    /// @dev Process the controller error from the normalized error.
    function getControllerError(int256 err) internal view returns (int256) {
        int256 errP = int256(_kp).rayMulInt(err);
        return errP.add(_errI);
    }

    /// @dev Transfer Function for calculation of _currentVariableBorrowRate (https://www.desmos.com/calculator/dj5puy23wz)
    function transferFunction(int256 controllerError) public view returns (uint256) {
        int256 ce = controllerError > _minControllerError ? controllerError : _minControllerError;
        return uint256(M_FACTOR.rayMulInt((ce.add(RAY)).rayDivInt(2 * RAY).rayPowerInt(N_FACTOR)));
    }

    /**
     * @notice getReserveFactor() from ReserveConfiguration can't be used with memory.
     * So we need to redefine this function here using memory.
     * @dev Gets the reserve factor of the reserve
     * @param self The reserve configuration
     * @return The reserve factor
     */
    function getReserveFactor(DataTypes.ReserveConfigurationMap memory self) internal pure returns (uint256) {
        return (self.data & ~ReserveConfiguration.RESERVE_FACTOR_MASK)
            >> ReserveConfiguration.RESERVE_FACTOR_START_BIT_POSITION;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
  function _msgSender() internal view virtual returns (address payable) {
    return msg.sender;
  }

  function _msgData() internal view virtual returns (bytes memory) {
    this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
    return msg.data;
  }
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves `amount` tokens from the caller's account to `recipient`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);

  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);

  /**
   * @dev Moves `amount` tokens from `sender` to `recipient` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) external returns (bool);

  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;

import {IERC20} from './IERC20.sol';

interface IERC20Detailed is IERC20 {
  function name() external view returns (string memory);

  function symbol() external view returns (string memory);

  function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import './Context.sol';

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
  address private _owner;

  event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

  /**
   * @dev Initializes the contract setting the deployer as the initial owner.
   */
  constructor() internal {
    address msgSender = _msgSender();
    _owner = msgSender;
    emit OwnershipTransferred(address(0), msgSender);
  }

  /**
   * @dev Returns the address of the current owner.
   */
  function owner() public view returns (address) {
    return _owner;
  }

  /**
   * @dev Throws if called by any account other than the owner.
   */
  modifier onlyOwner() {
    require(_owner == _msgSender(), 'Ownable: caller is not the owner');
    _;
  }

  /**
   * @dev Leaves the contract without owner. It will not be possible to call
   * `onlyOwner` functions anymore. Can only be called by the current owner.
   *
   * NOTE: Renouncing ownership will leave the contract without an owner,
   * thereby removing any functionality that is only available to the owner.
   */
  function renounceOwnership() public virtual onlyOwner {
    emit OwnershipTransferred(_owner, address(0));
    _owner = address(0);
  }

  /**
   * @dev Transfers ownership of the contract to a new account (`newOwner`).
   * Can only be called by the current owner.
   */
  function transferOwnership(address newOwner) public virtual onlyOwner {
    require(newOwner != address(0), 'Ownable: new owner is the zero address');
    emit OwnershipTransferred(_owner, newOwner);
    _owner = newOwner;
  }
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
  /**
   * @dev Returns the addition of two unsigned integers, reverting on
   * overflow.
   *
   * Counterpart to Solidity's `+` operator.
   *
   * Requirements:
   * - Addition cannot overflow.
   */
  function add(uint256 a, uint256 b) internal pure returns (uint256) {
    uint256 c = a + b;
    require(c >= a, 'SafeMath: addition overflow');

    return c;
  }

  /**
   * @dev Returns the subtraction of two unsigned integers, reverting on
   * overflow (when the result is negative).
   *
   * Counterpart to Solidity's `-` operator.
   *
   * Requirements:
   * - Subtraction cannot overflow.
   */
  function sub(uint256 a, uint256 b) internal pure returns (uint256) {
    return sub(a, b, 'SafeMath: subtraction overflow');
  }

  /**
   * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
   * overflow (when the result is negative).
   *
   * Counterpart to Solidity's `-` operator.
   *
   * Requirements:
   * - Subtraction cannot overflow.
   */
  function sub(
    uint256 a,
    uint256 b,
    string memory errorMessage
  ) internal pure returns (uint256) {
    require(b <= a, errorMessage);
    uint256 c = a - b;

    return c;
  }

  /**
   * @dev Returns the multiplication of two unsigned integers, reverting on
   * overflow.
   *
   * Counterpart to Solidity's `*` operator.
   *
   * Requirements:
   * - Multiplication cannot overflow.
   */
  function mul(uint256 a, uint256 b) internal pure returns (uint256) {
    // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
    // benefit is lost if 'b' is also tested.
    // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
    if (a == 0) {
      return 0;
    }

    uint256 c = a * b;
    require(c / a == b, 'SafeMath: multiplication overflow');

    return c;
  }

  /**
   * @dev Returns the integer division of two unsigned integers. Reverts on
   * division by zero. The result is rounded towards zero.
   *
   * Counterpart to Solidity's `/` operator. Note: this function uses a
   * `revert` opcode (which leaves remaining gas untouched) while Solidity
   * uses an invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   * - The divisor cannot be zero.
   */
  function div(uint256 a, uint256 b) internal pure returns (uint256) {
    return div(a, b, 'SafeMath: division by zero');
  }

  /**
   * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
   * division by zero. The result is rounded towards zero.
   *
   * Counterpart to Solidity's `/` operator. Note: this function uses a
   * `revert` opcode (which leaves remaining gas untouched) while Solidity
   * uses an invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   * - The divisor cannot be zero.
   */
  function div(
    uint256 a,
    uint256 b,
    string memory errorMessage
  ) internal pure returns (uint256) {
    // Solidity only automatically asserts when dividing by 0
    require(b > 0, errorMessage);
    uint256 c = a / b;
    // assert(a == b * c + a % b); // There is no case in which this doesn't hold

    return c;
  }

  /**
   * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
   * Reverts when dividing by zero.
   *
   * Counterpart to Solidity's `%` operator. This function uses a `revert`
   * opcode (which leaves remaining gas untouched) while Solidity uses an
   * invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   * - The divisor cannot be zero.
   */
  function mod(uint256 a, uint256 b) internal pure returns (uint256) {
    return mod(a, b, 'SafeMath: modulo by zero');
  }

  /**
   * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
   * Reverts with custom message when dividing by zero.
   *
   * Counterpart to Solidity's `%` operator. This function uses a `revert`
   * opcode (which leaves remaining gas untouched) while Solidity uses an
   * invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   * - The divisor cannot be zero.
   */
  function mod(
    uint256 a,
    uint256 b,
    string memory errorMessage
  ) internal pure returns (uint256) {
    require(b != 0, errorMessage);
    return a % b;
  }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;

/**
 * @title SignedSafeMath
 * @dev Signed math operations with safety checks that revert on error.
 */
library SignedSafeMath {
    int256 constant private _INT256_MIN = -2**255;

    /**
     * @dev Returns the multiplication of two signed integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(int256 a, int256 b) internal pure returns (int256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        require(!(a == -1 && b == _INT256_MIN), "SignedSafeMath: multiplication overflow");

        int256 c = a * b;
        require(c / a == b, "SignedSafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two signed integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(int256 a, int256 b) internal pure returns (int256) {
        require(b != 0, "SignedSafeMath: division by zero");
        require(!(b == -1 && a == _INT256_MIN), "SignedSafeMath: division overflow");

        int256 c = a / b;

        return c;
    }

    /**
     * @dev Returns the subtraction of two signed integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(int256 a, int256 b) internal pure returns (int256) {
        int256 c = a - b;
        require((b >= 0 && c <= a) || (b < 0 && c > a), "SignedSafeMath: subtraction overflow");

        return c;
    }

    /**
     * @dev Returns the addition of two signed integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(int256 a, int256 b) internal pure returns (int256) {
        int256 c = a + b;
        require((b >= 0 && c >= a) || (b < 0 && c < a), "SignedSafeMath: addition overflow");

        return c;
    }
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;

import {IERC20} from '../dependencies/openzeppelin/contracts/IERC20.sol';
import {IScaledBalanceToken} from './IScaledBalanceToken.sol';
import {IInitializableAToken} from './IInitializableAToken.sol';
import {IRewarder} from './IRewarder.sol';

interface IAToken is IERC20, IScaledBalanceToken, IInitializableAToken {
  /**
   * @dev Emitted after the mint action
   * @param from The address performing the mint
   * @param value The amount being
   * @param index The new liquidity index of the reserve
   **/
  event Mint(address indexed from, uint256 value, uint256 index);

  /**
   * @dev Mints `amount` aTokens to `user`
   * @param user The address receiving the minted tokens
   * @param amount The amount of tokens getting minted
   * @param index The new liquidity index of the reserve
   * @return `true` if the the previous balance of the user was 0
   */
  function mint(
    address user,
    uint256 amount,
    uint256 index
  ) external returns (bool);

  /**
   * @dev Emitted after aTokens are burned
   * @param from The owner of the aTokens, getting them burned
   * @param target The address that will receive the underlying
   * @param value The amount being burned
   * @param index The new liquidity index of the reserve
   **/
  event Burn(address indexed from, address indexed target, uint256 value, uint256 index);

  /**
   * @dev Emitted during the transfer action
   * @param from The user whose tokens are being transferred
   * @param to The recipient
   * @param value The amount being transferred
   * @param index The new liquidity index of the reserve
   **/
  event BalanceTransfer(address indexed from, address indexed to, uint256 value, uint256 index);

  /**
   * @dev Burns aTokens from `user` and sends the equivalent amount of underlying to `receiverOfUnderlying`
   * @param user The owner of the aTokens, getting them burned
   * @param receiverOfUnderlying The address that will receive the underlying
   * @param amount The amount being burned
   * @param index The new liquidity index of the reserve
   **/
  function burn(
    address user,
    address receiverOfUnderlying,
    uint256 amount,
    uint256 index
  ) external;

  /**
   * @dev Mints aTokens to the reserve treasury
   * @param amount The amount of tokens getting minted
   * @param index The new liquidity index of the reserve
   */
  function mintToTreasury(uint256 amount, uint256 index) external;

  /**
   * @dev Transfers aTokens in the event of a borrow being liquidated, in case the liquidators reclaims the aToken
   * @param from The address getting liquidated, current owner of the aTokens
   * @param to The recipient
   * @param value The amount of tokens getting transferred
   **/
  function transferOnLiquidation(
    address from,
    address to,
    uint256 value
  ) external;

  /**
   * @dev Transfers the underlying asset to `target`. Used by the LendingPool to transfer
   * assets in borrow(), withdraw() and flashLoan()
   * @param user The recipient of the underlying
   * @param amount The amount getting transferred
   * @return The amount transferred
   **/
  function transferUnderlyingTo(address user, uint256 amount) external returns (uint256);

  /**
   * @dev Invoked to execute actions on the aToken side after a repayment.
   * @param user The user executing the repayment
   * @param amount The amount getting repaid
   **/
  function handleRepayment(address user, uint256 amount) external;

  /**
   * @dev Returns the address of the incentives controller contract
   **/
  function getIncentivesController() external view returns (IRewarder);

  /**
   * @dev Returns the address of the underlying asset of this aToken (E.g. WETH for aWETH)
   **/
  function UNDERLYING_ASSET_ADDRESS() external view returns (address);
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;

interface ICreditDelegationToken {
  event BorrowAllowanceDelegated(
    address indexed fromUser,
    address indexed toUser,
    address asset,
    uint256 amount
  );

  /**
   * @dev delegates borrowing power to a user on the specific debt token
   * @param delegatee the address receiving the delegated borrowing power
   * @param amount the maximum amount being delegated. Delegation will still
   * respect the liquidation constraints (even if delegated, a delegatee cannot
   * force a delegator HF to go below 1)
   **/
  function approveDelegation(address delegatee, uint256 amount) external;

  /**
   * @dev returns the borrow allowance of the user
   * @param fromUser The user to giving allowance
   * @param toUser The user to give allowance to
   * @return the current allowance of toUser
   **/
  function borrowAllowance(address fromUser, address toUser) external view returns (uint256);
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;

import {ILendingPool} from './ILendingPool.sol';
import {IRewarder} from './IRewarder.sol';

/**
 * @title IInitializableAToken
 * @notice Interface for the initialize function on AToken
 * @author Aave
 **/
interface IInitializableAToken {
  /**
   * @dev Emitted when an aToken is initialized
   * @param underlyingAsset The address of the underlying asset
   * @param pool The address of the associated lending pool
   * @param treasury The address of the treasury
   * @param incentivesController The address of the incentives controller for this aToken
   * @param aTokenDecimals the decimals of the underlying
   * @param aTokenName the name of the aToken
   * @param aTokenSymbol the symbol of the aToken
   * @param params A set of encoded parameters for additional initialization
   **/
  event Initialized(
    address indexed underlyingAsset,
    address indexed pool,
    address treasury,
    address incentivesController,
    uint8 aTokenDecimals,
    string aTokenName,
    string aTokenSymbol,
    bytes params
  );

  /**
   * @dev Initializes the aToken
   * @param pool The address of the lending pool where this aToken will be used
   * @param treasury The address of the Aave treasury, receiving the fees on this aToken
   * @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @param incentivesController The smart contract managing potential incentives distribution
   * @param aTokenDecimals The decimals of the aToken, same as the underlying asset's
   * @param aTokenName The name of the aToken
   * @param aTokenSymbol The symbol of the aToken
   */
  function initialize(
    ILendingPool pool,
    address treasury,
    address underlyingAsset,
    IRewarder incentivesController,
    uint8 aTokenDecimals,
    string calldata aTokenName,
    string calldata aTokenSymbol,
    bytes calldata params
  ) external;
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;

import {ILendingPool} from './ILendingPool.sol';
import {IRewarder} from './IRewarder.sol';

/**
 * @title IInitializableDebtToken
 * @notice Interface for the initialize function common between debt tokens
 * @author Aave
 **/
interface IInitializableDebtToken {
  /**
   * @dev Emitted when a debt token is initialized
   * @param underlyingAsset The address of the underlying asset
   * @param pool The address of the associated lending pool
   * @param incentivesController The address of the incentives controller for this aToken
   * @param debtTokenDecimals the decimals of the debt token
   * @param debtTokenName the name of the debt token
   * @param debtTokenSymbol the symbol of the debt token
   * @param params A set of encoded parameters for additional initialization
   **/
  event Initialized(
    address indexed underlyingAsset,
    address indexed pool,
    address incentivesController,
    uint8 debtTokenDecimals,
    string debtTokenName,
    string debtTokenSymbol,
    bytes params
  );

  /**
   * @dev Initializes the debt token.
   * @param pool The address of the lending pool where this aToken will be used
   * @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @param incentivesController The smart contract managing potential incentives distribution
   * @param debtTokenDecimals The decimals of the debtToken, same as the underlying asset's
   * @param debtTokenName The name of the token
   * @param debtTokenSymbol The symbol of the token
   */
  function initialize(
    ILendingPool pool,
    address underlyingAsset,
    IRewarder incentivesController,
    uint8 debtTokenDecimals,
    string memory debtTokenName,
    string memory debtTokenSymbol,
    bytes calldata params
  ) external;
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;

import {ILendingPoolAddressesProvider} from './ILendingPoolAddressesProvider.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';

interface ILendingPool {
  /**
   * @dev Emitted on deposit()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the deposit
   * @param onBehalfOf The beneficiary of the deposit, receiving the aTokens
   * @param amount The amount deposited
   * @param referral The referral code used
   **/
  event Deposit(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referral
  );

  /**
   * @dev Emitted on withdraw()
   * @param reserve The address of the underlyng asset being withdrawn
   * @param user The address initiating the withdrawal, owner of aTokens
   * @param to Address that will receive the underlying
   * @param amount The amount to be withdrawn
   **/
  event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);

  /**
   * @dev Emitted on borrow() and flashLoan() when debt needs to be opened
   * @param reserve The address of the underlying asset being borrowed
   * @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
   * initiator of the transaction on flashLoan()
   * @param onBehalfOf The address that will be getting the debt
   * @param amount The amount borrowed out
   * @param borrowRateMode The rate mode: 1 for Stable, 2 for Variable
   * @param borrowRate The numeric rate at which the user has borrowed
   * @param referral The referral code used
   **/
  event Borrow(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint256 borrowRateMode,
    uint256 borrowRate,
    uint16 indexed referral
  );

  /**
   * @dev Emitted on repay()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The beneficiary of the repayment, getting his debt reduced
   * @param repayer The address of the user initiating the repay(), providing the funds
   * @param amount The amount repaid
   **/
  event Repay(
    address indexed reserve,
    address indexed user,
    address indexed repayer,
    uint256 amount
  );

  /**
   * @dev Emitted on swapBorrowRateMode()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user swapping his rate mode
   * @param rateMode The rate mode that the user wants to swap to
   **/
  event Swap(address indexed reserve, address indexed user, uint256 rateMode);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   **/
  event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   **/
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on rebalanceStableBorrowRate()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user for which the rebalance has been executed
   **/
  event RebalanceStableBorrowRate(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on flashLoan()
   * @param target The address of the flash loan receiver contract
   * @param initiator The address initiating the flash loan
   * @param asset The address of the asset being flash borrowed
   * @param amount The amount flash borrowed
   * @param premium The fee flash borrowed
   * @param referralCode The referral code used
   **/
  event FlashLoan(
    address indexed target,
    address indexed initiator,
    address indexed asset,
    uint256 amount,
    uint256 premium,
    uint16 referralCode
  );

  /**
   * @dev Emitted when the pause is triggered.
   */
  event Paused();

  /**
   * @dev Emitted when the pause is lifted.
   */
  event Unpaused();

  /**
   * @dev Emitted when a borrower is liquidated. This event is emitted by the LendingPool via
   * LendingPoolCollateral manager using a DELEGATECALL
   * This allows to have the events in the generated ABI for LendingPool.
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param liquidatedCollateralAmount The amount of collateral received by the liiquidator
   * @param liquidator The address of the liquidator
   * @param receiveAToken `true` if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   **/
  event LiquidationCall(
    address indexed collateralAsset,
    address indexed debtAsset,
    address indexed user,
    uint256 debtToCover,
    uint256 liquidatedCollateralAmount,
    address liquidator,
    bool receiveAToken
  );

  /**
   * @dev Emitted when the state of a reserve is updated. NOTE: This event is actually declared
   * in the ReserveLogic library and emitted in the updateInterestRates() function. Since the function is internal,
   * the event will actually be fired by the LendingPool contract. The event is therefore replicated here so it
   * gets added to the LendingPool ABI
   * @param reserve The address of the underlying asset of the reserve
   * @param liquidityRate The new liquidity rate
   * @param stableBorrowRate The new stable borrow rate
   * @param variableBorrowRate The new variable borrow rate
   * @param liquidityIndex The new liquidity index
   * @param variableBorrowIndex The new variable borrow index
   **/
  event ReserveDataUpdated(
    address indexed reserve,
    uint256 liquidityRate,
    uint256 stableBorrowRate,
    uint256 variableBorrowRate,
    uint256 liquidityIndex,
    uint256 variableBorrowIndex
  );

  /**
   * @dev Deposits an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User deposits 100 USDC and gets in return 100 aUSDC
   * @param asset The address of the underlying asset to deposit
   * @param amount The amount to be deposited
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   **/
  function deposit(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external;

  /**
   * @dev Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
   * E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
   * @param asset The address of the underlying asset to withdraw
   * @param amount The underlying amount to be withdrawn
   *   - Send the value type(uint256).max in order to withdraw the whole aToken balance
   * @param to Address that will receive the underlying, same as msg.sender if the user
   *   wants to receive it on his own wallet, or a different address if the beneficiary is a
   *   different wallet
   * @return The final amount withdrawn
   **/
  function withdraw(
    address asset,
    uint256 amount,
    address to
  ) external returns (uint256);

  /**
   * @dev Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
   * already deposited enough collateral, or he was given enough allowance by a credit delegator on the
   * corresponding debt token (StableDebtToken or VariableDebtToken)
   * - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
   *   and 100 stable/variable debt tokens, depending on the `interestRateMode`
   * @param asset The address of the underlying asset to borrow
   * @param amount The amount to be borrowed
   * @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param onBehalfOf Address of the user who will receive the debt. Should be the address of the borrower itself
   * calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
   * if he has been given credit delegation allowance
   **/
  function borrow(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    uint16 referralCode,
    address onBehalfOf
  ) external;

  /**
   * @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
   * - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param rateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @return The final amount repaid
   **/
  function repay(
    address asset,
    uint256 amount,
    uint256 rateMode,
    address onBehalfOf
  ) external returns (uint256);

  /**
   * @dev Allows a borrower to swap his debt between stable and variable mode, or viceversa
   * @param asset The address of the underlying asset borrowed
   * @param rateMode The rate mode that the user wants to swap to
   **/
  function swapBorrowRateMode(address asset, uint256 rateMode) external;

  /**
   * @dev Rebalances the stable interest rate of a user to the current stable rate defined on the reserve.
   * - Users can be rebalanced if the following conditions are satisfied:
   *     1. Usage ratio is above 95%
   *     2. the current deposit APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too much has been
   *        borrowed at a stable rate and depositors are not earning enough
   * @param asset The address of the underlying asset borrowed
   * @param user The address of the user to be rebalanced
   **/
  function rebalanceStableBorrowRate(address asset, address user) external;

  /**
   * @dev Allows depositors to enable/disable a specific deposited asset as collateral
   * @param asset The address of the underlying asset deposited
   * @param useAsCollateral `true` if the user wants to use the deposit as collateral, `false` otherwise
   **/
  function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;

  /**
   * @dev Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
   * - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
   *   a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param receiveAToken `true` if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   **/
  function liquidationCall(
    address collateralAsset,
    address debtAsset,
    address user,
    uint256 debtToCover,
    bool receiveAToken
  ) external;

  /**
   * @dev Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept into consideration.
   * For further details please visit https://developers.aave.com
   * @param receiverAddress The address of the contract receiving the funds, implementing the IFlashLoanReceiver interface
   * @param assets The addresses of the assets being flash-borrowed
   * @param amounts The amounts amounts being flash-borrowed
   * @param modes Types of the debt to open if the flash loan is not returned:
   *   0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
   *   1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   *   2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   * @param onBehalfOf The address  that will receive the debt in the case of using on `modes` 1 or 2
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   **/
  function flashLoan(
    address receiverAddress,
    address[] calldata assets,
    uint256[] calldata amounts,
    uint256[] calldata modes,
    address onBehalfOf,
    bytes calldata params,
    uint16 referralCode
  ) external;

  /**
   * @dev Returns the user account data across all the reserves
   * @param user The address of the user
   * @return totalCollateralETH the total collateral in ETH of the user
   * @return totalDebtETH the total debt in ETH of the user
   * @return availableBorrowsETH the borrowing power left of the user
   * @return currentLiquidationThreshold the liquidation threshold of the user
   * @return ltv the loan to value of the user
   * @return healthFactor the current health factor of the user
   **/
  function getUserAccountData(address user)
    external
    view
    returns (
      uint256 totalCollateralETH,
      uint256 totalDebtETH,
      uint256 availableBorrowsETH,
      uint256 currentLiquidationThreshold,
      uint256 ltv,
      uint256 healthFactor
    );

  function initReserve(
    address reserve,
    address aTokenAddress,
    address stableDebtAddress,
    address variableDebtAddress,
    address interestRateStrategyAddress
  ) external;

  function setReserveInterestRateStrategyAddress(address reserve, address rateStrategyAddress)
    external;

  function setConfiguration(address reserve, uint256 configuration) external;

  /**
   * @dev Returns the configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The configuration of the reserve
   **/
  function getConfiguration(address asset)
    external
    view
    returns (DataTypes.ReserveConfigurationMap memory);

  /**
   * @dev Returns the configuration of the user across all the reserves
   * @param user The user address
   * @return The configuration of the user
   **/
  function getUserConfiguration(address user)
    external
    view
    returns (DataTypes.UserConfigurationMap memory);

  /**
   * @dev Returns the normalized income normalized income of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve's normalized income
   */
  function getReserveNormalizedIncome(address asset) external view returns (uint256);

  /**
   * @dev Returns the normalized variable debt per unit of asset
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve normalized variable debt
   */
  function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);

  /**
   * @dev Returns the state and configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The state of the reserve
   **/
  function getReserveData(address asset) external view returns (DataTypes.ReserveData memory);

  function finalizeTransfer(
    address asset,
    address from,
    address to,
    uint256 amount,
    uint256 balanceFromAfter,
    uint256 balanceToBefore
  ) external;

  function getReservesList() external view returns (address[] memory);

  function getAddressesProvider() external view returns (ILendingPoolAddressesProvider);

  function setPause(bool val) external;

  function paused() external view returns (bool);
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;

/**
 * @title LendingPoolAddressesProvider contract
 * @dev Main registry of addresses part of or connected to the protocol, including permissioned roles
 * - Acting also as factory of proxies and admin of those, so with right to change its implementations
 * - Owned by the Aave Governance
 * @author Aave
 **/
interface ILendingPoolAddressesProvider {
  event MarketIdSet(string newMarketId);
  event LendingPoolUpdated(address indexed newAddress);
  event ConfigurationAdminUpdated(address indexed newAddress);
  event EmergencyAdminUpdated(address indexed newAddress);
  event LendingPoolConfiguratorUpdated(address indexed newAddress);
  event LendingPoolCollateralManagerUpdated(address indexed newAddress);
  event PriceOracleUpdated(address indexed newAddress);
  event LendingRateOracleUpdated(address indexed newAddress);
  event ProxyCreated(bytes32 id, address indexed newAddress);
  event AddressSet(bytes32 id, address indexed newAddress, bool hasProxy);

  function getMarketId() external view returns (string memory);

  function setMarketId(string calldata marketId) external;

  function setAddress(bytes32 id, address newAddress) external;

  function setAddressAsProxy(bytes32 id, address impl) external;

  function getAddress(bytes32 id) external view returns (address);

  function getLendingPool() external view returns (address);

  function setLendingPoolImpl(address pool) external;

  function getLendingPoolConfigurator() external view returns (address);

  function setLendingPoolConfiguratorImpl(address configurator) external;

  function getLendingPoolCollateralManager() external view returns (address);

  function setLendingPoolCollateralManager(address manager) external;

  function getPoolAdmin() external view returns (address);

  function setPoolAdmin(address admin) external;

  function getEmergencyAdmin() external view returns (address);

  function setEmergencyAdmin(address admin) external;

  function getUiSigner() external view returns (address);

  function setUiSigner(address signer) external;

  function getPriceOracle() external view returns (address);

  function setPriceOracle(address priceOracle) external;

  function getLendingRateOracle() external view returns (address);

  function setLendingRateOracle(address lendingRateOracle) external;
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;

/**
 * @title IReserveInterestRateStrategyInterface interface
 * @dev Interface for the calculation of the interest rates
 * @author Aave
 */
interface IReserveInterestRateStrategy {
  function baseVariableBorrowRate() external view returns (uint256);

  function getMaxVariableBorrowRate() external view returns (uint256);

  function calculateInterestRates(
    address reserve,
    uint256 availableLiquidity,
    uint256 totalStableDebt,
    uint256 totalVariableDebt,
    uint256 averageStableBorrowRate,
    uint256 reserveFactor
  )
    external
    returns (
      uint256,
      uint256,
      uint256
    );

  function calculateInterestRates(
    address reserve,
    address aToken,
    uint256 liquidityAdded,
    uint256 liquidityTaken,
    uint256 totalStableDebt,
    uint256 totalVariableDebt,
    uint256 averageStableBorrowRate,
    uint256 reserveFactor
  )
    external
    returns (
      uint256 liquidityRate,
      uint256 stableBorrowRate,
      uint256 variableBorrowRate
    );
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;

interface IRewarder {
  event RewardsAccrued(address indexed user, uint256 amount);

  event RewardsClaimed(address indexed user, address indexed to, uint256 amount);

  event RewardsClaimed(
    address indexed user,
    address indexed to,
    address indexed claimer,
    uint256 amount
  );

  event ClaimerSet(address indexed user, address indexed claimer);

  /*
   * @dev Returns the configuration of the distribution for a certain asset
   * @param asset The address of the reference asset of the distribution
   * @return The asset index, the emission per second and the last updated timestamp
   **/
  function getAssetData(address asset)
    external
    view
    returns (
      uint256,
      uint256,
      uint256
    );

  /*
   * LEGACY **************************
   * @dev Returns the configuration of the distribution for a certain asset
   * @param asset The address of the reference asset of the distribution
   * @return The asset index, the emission per second and the last updated timestamp
   **/
  function assets(address asset)
    external
    view
    returns (
      uint128,
      uint128,
      uint256
    );

  /**
   * @dev Whitelists an address to claim the rewards on behalf of another address
   * @param user The address of the user
   * @param claimer The address of the claimer
   */
  function setClaimer(address user, address claimer) external;

  /**
   * @dev Returns the whitelisted claimer for a certain address (0x0 if not set)
   * @param user The address of the user
   * @return The claimer address
   */
  function getClaimer(address user) external view returns (address);

  /**
   * @dev Configure assets for a certain rewards emission
   * @param assets The assets to incentivize
   * @param emissionsPerSecond The emission for each asset
   */
  function configureAssets(address[] calldata assets, uint256[] calldata emissionsPerSecond)
    external;

  /**
   * @dev Called by the corresponding asset on any update that affects the rewards distribution
   * @param asset The address of the user
   * @param userBalance The balance of the user of the asset in the lending pool
   * @param totalSupply The total supply of the asset in the lending pool
   **/
  function handleAction(
    address asset,
    uint256 userBalance,
    uint256 totalSupply
  ) external;

  /**
   * @dev Returns the total of rewards of an user, already accrued + not yet accrued
   * @param user The address of the user
   * @return The rewards
   **/
  function getRewardsBalance(address[] calldata assets, address user)
    external
    view
    returns (uint256);

  /**
   * @dev Claims reward for an user, on all the assets of the lending pool, accumulating the pending rewards
   * @param amount Amount of rewards to claim
   * @param to Address that will be receiving the rewards
   * @return Rewards claimed
   **/
  function claimRewards(
    address[] calldata assets,
    uint256 amount,
    address to
  ) external returns (uint256);

  /**
   * @dev Claims reward for an user on behalf, on all the assets of the lending pool, accumulating the pending rewards. The caller must
   * be whitelisted via "allowClaimOnBehalf" function by the RewardsAdmin role manager
   * @param amount Amount of rewards to claim
   * @param user Address to check and claim rewards
   * @param to Address that will be receiving the rewards
   * @return Rewards claimed
   **/
  function claimRewardsOnBehalf(
    address[] calldata assets,
    uint256 amount,
    address user,
    address to
  ) external returns (uint256);

  /**
   * @dev returns the unclaimed rewards of the user
   * @param user the address of the user
   * @return the unclaimed user rewards
   */
  function getUserUnclaimedRewards(address user) external view returns (uint256);

  /**
   * @dev returns the unclaimed rewards of the user
   * @param user the address of the user
   * @param asset The asset to incentivize
   * @return the user index for the asset
   */
  function getUserAssetData(address user, address asset) external view returns (uint256);

  /**
   * @dev for backward compatibility with previous implementation of the Incentives controller
   */
  function REWARD_TOKEN() external view returns (address);

  /**
   * @dev for backward compatibility with previous implementation of the Incentives controller
   */
  function PRECISION() external view returns (uint8);

  /**
   * @dev Gets the distribution end timestamp of the emissions
   */
  function DISTRIBUTION_END() external view returns (uint256);
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;

interface IScaledBalanceToken {
  /**
   * @dev Returns the scaled balance of the user. The scaled balance is the sum of all the
   * updated stored balance divided by the reserve's liquidity index at the moment of the update
   * @param user The user whose balance is calculated
   * @return The scaled balance of the user
   **/
  function scaledBalanceOf(address user) external view returns (uint256);

  /**
   * @dev Returns the scaled balance of the user and the scaled total supply.
   * @param user The address of the user
   * @return The scaled balance of the user
   * @return The scaled balance and the scaled total supply
   **/
  function getScaledUserBalanceAndSupply(address user) external view returns (uint256, uint256);

  /**
   * @dev Returns the scaled total supply of the variable debt token. Represents sum(debt/index)
   * @return The scaled total supply
   **/
  function scaledTotalSupply() external view returns (uint256);
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;

import {IScaledBalanceToken} from './IScaledBalanceToken.sol';
import {IInitializableDebtToken} from './IInitializableDebtToken.sol';
import {IRewarder} from './IRewarder.sol';

/**
 * @title IVariableDebtToken
 * @author Aave
 * @notice Defines the basic interface for a variable debt token.
 **/
interface IVariableDebtToken is IScaledBalanceToken, IInitializableDebtToken {
  /**
   * @dev Emitted after the mint action
   * @param from The address performing the mint
   * @param onBehalfOf The address of the user on which behalf minting has been performed
   * @param value The amount to be minted
   * @param index The last index of the reserve
   **/
  event Mint(address indexed from, address indexed onBehalfOf, uint256 value, uint256 index);

  /**
   * @dev Mints debt token to the `onBehalfOf` address
   * @param user The address receiving the borrowed underlying, being the delegatee in case
   * of credit delegate, or same as `onBehalfOf` otherwise
   * @param onBehalfOf The address receiving the debt tokens
   * @param amount The amount of debt being minted
   * @param index The variable debt index of the reserve
   * @return `true` if the the previous balance of the user is 0
   **/
  function mint(
    address user,
    address onBehalfOf,
    uint256 amount,
    uint256 index
  ) external returns (bool);

  /**
   * @dev Emitted when variable debt is burnt
   * @param user The user which debt has been burned
   * @param amount The amount of debt being burned
   * @param index The index of the user
   **/
  event Burn(address indexed user, uint256 amount, uint256 index);

  /**
   * @dev Burns user variable debt
   * @param user The user which debt is burnt
   * @param index The variable debt index of the reserve
   **/
  function burn(
    address user,
    uint256 amount,
    uint256 index
  ) external;

  /**
   * @dev Returns the address of the incentives controller contract
   **/
  function getIncentivesController() external view returns (IRewarder);
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;

/**
 * @title VersionedInitializable
 *
 * @dev Helper contract to implement initializer functions. To use it, replace
 * the constructor with a function that has the `initializer` modifier.
 * WARNING: Unlike constructors, initializer functions must be manually
 * invoked. This applies both to deploying an Initializable contract, as well
 * as extending an Initializable contract via inheritance.
 * WARNING: When used with inheritance, manual care must be taken to not invoke
 * a parent initializer twice, or ensure that all initializers are idempotent,
 * because this is not dealt with automatically as with constructors.
 *
 * @author Aave, inspired by the OpenZeppelin Initializable contract
 */
abstract contract VersionedInitializable {
  /**
   * @dev Indicates that the contract has been initialized.
   */
  uint256 private lastInitializedRevision = 0;

  /**
   * @dev Indicates that the contract is in the process of being initialized.
   */
  bool private initializing;

  /**
   * @dev Modifier to use in the initializer function of a contract.
   */
  modifier initializer() {
    uint256 revision = getRevision();
    require(
      initializing || isConstructor() || revision > lastInitializedRevision,
      'Contract instance has already been initialized'
    );

    bool isTopLevelCall = !initializing;
    if (isTopLevelCall) {
      initializing = true;
      lastInitializedRevision = revision;
    }

    _;

    if (isTopLevelCall) {
      initializing = false;
    }
  }

  /**
   * @dev returns the revision number of the contract
   * Needs to be defined in the inherited class as a constant.
   **/
  function getRevision() internal pure virtual returns (uint256);

  /**
   * @dev Returns true if and only if the function is running in the constructor
   **/
  function isConstructor() private view returns (bool) {
    // extcodesize checks the size of the code stored in an address, and
    // address returns the current address. Since the code is still not
    // deployed when running a constructor, any checks on its code size will
    // yield zero, making it an effective way to detect if a contract is
    // under construction or not.
    uint256 cs;
    //solium-disable-next-line
    assembly {
      cs := extcodesize(address())
    }
    return cs == 0;
  }

  // Reserved storage space to allow for layout changes in the future.
  uint256[50] private ______gap;
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;

import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';

/**
 * @title ReserveConfiguration library
 * @author Aave
 * @notice Implements the bitmap logic to handle the reserve configuration
 */
library ReserveConfiguration {
  uint256 constant LTV_MASK =                   0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000; // prettier-ignore
  uint256 constant LIQUIDATION_THRESHOLD_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFF; // prettier-ignore
  uint256 constant LIQUIDATION_BONUS_MASK =     0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFF; // prettier-ignore
  uint256 constant DECIMALS_MASK =              0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00FFFFFFFFFFFF; // prettier-ignore
  uint256 constant ACTIVE_MASK =                0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFF; // prettier-ignore
  uint256 constant FROZEN_MASK =                0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDFFFFFFFFFFFFFF; // prettier-ignore
  uint256 constant BORROWING_MASK =             0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBFFFFFFFFFFFFFF; // prettier-ignore
  uint256 constant STABLE_BORROWING_MASK =      0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFFFFFFFFFFFFF; // prettier-ignore
  uint256 constant RESERVE_FACTOR_MASK =        0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFFFFFFFFFF; // prettier-ignore

  /// @dev For the LTV, the start bit is 0 (up to 15), hence no bitshifting is needed
  uint256 constant LIQUIDATION_THRESHOLD_START_BIT_POSITION = 16;
  uint256 constant LIQUIDATION_BONUS_START_BIT_POSITION = 32;
  uint256 constant RESERVE_DECIMALS_START_BIT_POSITION = 48;
  uint256 constant IS_ACTIVE_START_BIT_POSITION = 56;
  uint256 constant IS_FROZEN_START_BIT_POSITION = 57;
  uint256 constant BORROWING_ENABLED_START_BIT_POSITION = 58;
  uint256 constant STABLE_BORROWING_ENABLED_START_BIT_POSITION = 59;
  uint256 constant RESERVE_FACTOR_START_BIT_POSITION = 64;

  uint256 constant MAX_VALID_LTV = 65535;
  uint256 constant MAX_VALID_LIQUIDATION_THRESHOLD = 65535;
  uint256 constant MAX_VALID_LIQUIDATION_BONUS = 65535;
  uint256 constant MAX_VALID_DECIMALS = 255;
  uint256 constant MAX_VALID_RESERVE_FACTOR = 65535;

  /**
   * @dev Sets the Loan to Value of the reserve
   * @param self The reserve configuration
   * @param ltv the new ltv
   **/
  function setLtv(DataTypes.ReserveConfigurationMap memory self, uint256 ltv) internal pure {
    require(ltv <= MAX_VALID_LTV, Errors.RC_INVALID_LTV);

    self.data = (self.data & LTV_MASK) | ltv;
  }

  /**
   * @dev Gets the Loan to Value of the reserve
   * @param self The reserve configuration
   * @return The loan to value
   **/
  function getLtv(DataTypes.ReserveConfigurationMap storage self) internal view returns (uint256) {
    return self.data & ~LTV_MASK;
  }

  /**
   * @dev Sets the liquidation threshold of the reserve
   * @param self The reserve configuration
   * @param threshold The new liquidation threshold
   **/
  function setLiquidationThreshold(DataTypes.ReserveConfigurationMap memory self, uint256 threshold)
    internal
    pure
  {
    require(threshold <= MAX_VALID_LIQUIDATION_THRESHOLD, Errors.RC_INVALID_LIQ_THRESHOLD);

    self.data =
      (self.data & LIQUIDATION_THRESHOLD_MASK) |
      (threshold << LIQUIDATION_THRESHOLD_START_BIT_POSITION);
  }

  /**
   * @dev Gets the liquidation threshold of the reserve
   * @param self The reserve configuration
   * @return The liquidation threshold
   **/
  function getLiquidationThreshold(DataTypes.ReserveConfigurationMap storage self)
    internal
    view
    returns (uint256)
  {
    return (self.data & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION;
  }

  /**
   * @dev Sets the liquidation bonus of the reserve
   * @param self The reserve configuration
   * @param bonus The new liquidation bonus
   **/
  function setLiquidationBonus(DataTypes.ReserveConfigurationMap memory self, uint256 bonus)
    internal
    pure
  {
    require(bonus <= MAX_VALID_LIQUIDATION_BONUS, Errors.RC_INVALID_LIQ_BONUS);

    self.data =
      (self.data & LIQUIDATION_BONUS_MASK) |
      (bonus << LIQUIDATION_BONUS_START_BIT_POSITION);
  }

  /**
   * @dev Gets the liquidation bonus of the reserve
   * @param self The reserve configuration
   * @return The liquidation bonus
   **/
  function getLiquidationBonus(DataTypes.ReserveConfigurationMap storage self)
    internal
    view
    returns (uint256)
  {
    return (self.data & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION;
  }

  /**
   * @dev Sets the decimals of the underlying asset of the reserve
   * @param self The reserve configuration
   * @param decimals The decimals
   **/
  function setDecimals(DataTypes.ReserveConfigurationMap memory self, uint256 decimals)
    internal
    pure
  {
    require(decimals <= MAX_VALID_DECIMALS, Errors.RC_INVALID_DECIMALS);

    self.data = (self.data & DECIMALS_MASK) | (decimals << RESERVE_DECIMALS_START_BIT_POSITION);
  }

  /**
   * @dev Gets the decimals of the underlying asset of the reserve
   * @param self The reserve configuration
   * @return The decimals of the asset
   **/
  function getDecimals(DataTypes.ReserveConfigurationMap storage self)
    internal
    view
    returns (uint256)
  {
    return (self.data & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION;
  }

  /**
   * @dev Sets the active state of the reserve
   * @param self The reserve configuration
   * @param active The active state
   **/
  function setActive(DataTypes.ReserveConfigurationMap memory self, bool active) internal pure {
    self.data =
      (self.data & ACTIVE_MASK) |
      (uint256(active ? 1 : 0) << IS_ACTIVE_START_BIT_POSITION);
  }

  /**
   * @dev Gets the active state of the reserve
   * @param self The reserve configuration
   * @return The active state
   **/
  function getActive(DataTypes.ReserveConfigurationMap storage self) internal view returns (bool) {
    return (self.data & ~ACTIVE_MASK) != 0;
  }

  /**
   * @dev Sets the frozen state of the reserve
   * @param self The reserve configuration
   * @param frozen The frozen state
   **/
  function setFrozen(DataTypes.ReserveConfigurationMap memory self, bool frozen) internal pure {
    self.data =
      (self.data & FROZEN_MASK) |
      (uint256(frozen ? 1 : 0) << IS_FROZEN_START_BIT_POSITION);
  }

  /**
   * @dev Gets the frozen state of the reserve
   * @param self The reserve configuration
   * @return The frozen state
   **/
  function getFrozen(DataTypes.ReserveConfigurationMap storage self) internal view returns (bool) {
    return (self.data & ~FROZEN_MASK) != 0;
  }

  /**
   * @dev Enables or disables borrowing on the reserve
   * @param self The reserve configuration
   * @param enabled True if the borrowing needs to be enabled, false otherwise
   **/
  function setBorrowingEnabled(DataTypes.ReserveConfigurationMap memory self, bool enabled)
    internal
    pure
  {
    self.data =
      (self.data & BORROWING_MASK) |
      (uint256(enabled ? 1 : 0) << BORROWING_ENABLED_START_BIT_POSITION);
  }

  /**
   * @dev Gets the borrowing state of the reserve
   * @param self The reserve configuration
   * @return The borrowing state
   **/
  function getBorrowingEnabled(DataTypes.ReserveConfigurationMap storage self)
    internal
    view
    returns (bool)
  {
    return (self.data & ~BORROWING_MASK) != 0;
  }

  /**
   * @dev Enables or disables stable rate borrowing on the reserve
   * @param self The reserve configuration
   * @param enabled True if the stable rate borrowing needs to be enabled, false otherwise
   **/
  function setStableRateBorrowingEnabled(
    DataTypes.ReserveConfigurationMap memory self,
    bool enabled
  ) internal pure {
    self.data =
      (self.data & STABLE_BORROWING_MASK) |
      (uint256(enabled ? 1 : 0) << STABLE_BORROWING_ENABLED_START_BIT_POSITION);
  }

  /**
   * @dev Gets the stable rate borrowing state of the reserve
   * @param self The reserve configuration
   * @return The stable rate borrowing state
   **/
  function getStableRateBorrowingEnabled(DataTypes.ReserveConfigurationMap storage self)
    internal
    view
    returns (bool)
  {
    return (self.data & ~STABLE_BORROWING_MASK) != 0;
  }

  /**
   * @dev Sets the reserve factor of the reserve
   * @param self The reserve configuration
   * @param reserveFactor The reserve factor
   **/
  function setReserveFactor(DataTypes.ReserveConfigurationMap memory self, uint256 reserveFactor)
    internal
    pure
  {
    require(reserveFactor <= MAX_VALID_RESERVE_FACTOR, Errors.RC_INVALID_RESERVE_FACTOR);

    self.data =
      (self.data & RESERVE_FACTOR_MASK) |
      (reserveFactor << RESERVE_FACTOR_START_BIT_POSITION);
  }

  /**
   * @dev Gets the reserve factor of the reserve
   * @param self The reserve configuration
   * @return The reserve factor
   **/
  function getReserveFactor(DataTypes.ReserveConfigurationMap storage self)
    internal
    view
    returns (uint256)
  {
    return (self.data & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION;
  }

  /**
   * @dev Gets the configuration flags of the reserve
   * @param self The reserve configuration
   * @return The state flags representing active, frozen, borrowing enabled, stableRateBorrowing enabled
   **/
  function getFlags(DataTypes.ReserveConfigurationMap storage self)
    internal
    view
    returns (
      bool,
      bool,
      bool,
      bool
    )
  {
    uint256 dataLocal = self.data;

    return (
      (dataLocal & ~ACTIVE_MASK) != 0,
      (dataLocal & ~FROZEN_MASK) != 0,
      (dataLocal & ~BORROWING_MASK) != 0,
      (dataLocal & ~STABLE_BORROWING_MASK) != 0
    );
  }

  /**
   * @dev Gets the configuration paramters of the reserve
   * @param self The reserve configuration
   * @return The state params representing ltv, liquidation threshold, liquidation bonus, the reserve decimals
   **/
  function getParams(DataTypes.ReserveConfigurationMap storage self)
    internal
    view
    returns (
      uint256,
      uint256,
      uint256,
      uint256,
      uint256
    )
  {
    uint256 dataLocal = self.data;

    return (
      dataLocal & ~LTV_MASK,
      (dataLocal & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION,
      (dataLocal & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION,
      (dataLocal & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION,
      (dataLocal & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION
    );
  }

  /**
   * @dev Gets the configuration paramters of the reserve from a memory object
   * @param self The reserve configuration
   * @return The state params representing ltv, liquidation threshold, liquidation bonus, the reserve decimals
   **/
  function getParamsMemory(DataTypes.ReserveConfigurationMap memory self)
    internal
    pure
    returns (
      uint256,
      uint256,
      uint256,
      uint256,
      uint256
    )
  {
    return (
      self.data & ~LTV_MASK,
      (self.data & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION,
      (self.data & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION,
      (self.data & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION,
      (self.data & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION
    );
  }

  /**
   * @dev Gets the configuration flags of the reserve from a memory object
   * @param self The reserve configuration
   * @return The state flags representing active, frozen, borrowing enabled, stableRateBorrowing enabled
   **/
  function getFlagsMemory(DataTypes.ReserveConfigurationMap memory self)
    internal
    pure
    returns (
      bool,
      bool,
      bool,
      bool
    )
  {
    return (
      (self.data & ~ACTIVE_MASK) != 0,
      (self.data & ~FROZEN_MASK) != 0,
      (self.data & ~BORROWING_MASK) != 0,
      (self.data & ~STABLE_BORROWING_MASK) != 0
    );
  }
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;

/**
 * @title Errors library
 * @author Aave
 * @notice Defines the error messages emitted by the different contracts of the Aave protocol
 * @dev Error messages prefix glossary:
 *  - VL = ValidationLogic
 *  - MATH = Math libraries
 *  - CT = Common errors between tokens (AToken, VariableDebtToken and StableDebtToken)
 *  - AT = AToken
 *  - SDT = StableDebtToken
 *  - VDT = VariableDebtToken
 *  - LP = LendingPool
 *  - LPAPR = LendingPoolAddressesProviderRegistry
 *  - LPC = LendingPoolConfiguration
 *  - RL = ReserveLogic
 *  - LPCM = LendingPoolCollateralManager
 *  - P = Pausable
 */
library Errors {
  //common errors
  string public constant CALLER_NOT_POOL_ADMIN = '33'; // 'The caller must be the pool admin'
  string public constant BORROW_ALLOWANCE_NOT_ENOUGH = '59'; // User borrows on behalf, but allowance are too small

  //contract specific errors
  string public constant VL_INVALID_AMOUNT = '1'; // 'Amount must be greater than 0'
  string public constant VL_NO_ACTIVE_RESERVE = '2'; // 'Action requires an active reserve'
  string public constant VL_RESERVE_FROZEN = '3'; // 'Action cannot be performed because the reserve is frozen'
  string public constant VL_CURRENT_AVAILABLE_LIQUIDITY_NOT_ENOUGH = '4'; // 'The current liquidity is not enough'
  string public constant VL_NOT_ENOUGH_AVAILABLE_USER_BALANCE = '5'; // 'User cannot withdraw more than the available balance'
  string public constant VL_TRANSFER_NOT_ALLOWED = '6'; // 'Transfer cannot be allowed.'
  string public constant VL_BORROWING_NOT_ENABLED = '7'; // 'Borrowing is not enabled'
  string public constant VL_INVALID_INTEREST_RATE_MODE_SELECTED = '8'; // 'Invalid interest rate mode selected'
  string public constant VL_COLLATERAL_BALANCE_IS_0 = '9'; // 'The collateral balance is 0'
  string public constant VL_HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD = '10'; // 'Health factor is lesser than the liquidation threshold'
  string public constant VL_COLLATERAL_CANNOT_COVER_NEW_BORROW = '11'; // 'There is not enough collateral to cover a new borrow'
  string public constant VL_STABLE_BORROWING_NOT_ENABLED = '12'; // stable borrowing not enabled
  string public constant VL_COLLATERAL_SAME_AS_BORROWING_CURRENCY = '13'; // collateral is (mostly) the same currency that is being borrowed
  string public constant VL_AMOUNT_BIGGER_THAN_MAX_LOAN_SIZE_STABLE = '14'; // 'The requested amount is greater than the max loan size in stable rate mode
  string public constant VL_NO_DEBT_OF_SELECTED_TYPE = '15'; // 'for repayment of stable debt, the user needs to have stable debt, otherwise, he needs to have variable debt'
  string public constant VL_NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF = '16'; // 'To repay on behalf of an user an explicit amount to repay is needed'
  string public constant VL_NO_STABLE_RATE_LOAN_IN_RESERVE = '17'; // 'User does not have a stable rate loan in progress on this reserve'
  string public constant VL_NO_VARIABLE_RATE_LOAN_IN_RESERVE = '18'; // 'User does not have a variable rate loan in progress on this reserve'
  string public constant VL_UNDERLYING_BALANCE_NOT_GREATER_THAN_0 = '19'; // 'The underlying balance needs to be greater than 0'
  string public constant VL_DEPOSIT_ALREADY_IN_USE = '20'; // 'User deposit is already being used as collateral'
  string public constant LP_NOT_ENOUGH_STABLE_BORROW_BALANCE = '21'; // 'User does not have any stable rate loan for this reserve'
  string public constant LP_INTEREST_RATE_REBALANCE_CONDITIONS_NOT_MET = '22'; // 'Interest rate rebalance conditions were not met'
  string public constant LP_LIQUIDATION_CALL_FAILED = '23'; // 'Liquidation call failed'
  string public constant LP_NOT_ENOUGH_LIQUIDITY_TO_BORROW = '24'; // 'There is not enough liquidity available to borrow'
  string public constant LP_REQUESTED_AMOUNT_TOO_SMALL = '25'; // 'The requested amount is too small for a FlashLoan.'
  string public constant LP_INCONSISTENT_PROTOCOL_ACTUAL_BALANCE = '26'; // 'The actual balance of the protocol is inconsistent'
  string public constant LP_CALLER_NOT_LENDING_POOL_CONFIGURATOR = '27'; // 'The caller of the function is not the lending pool configurator'
  string public constant LP_INCONSISTENT_FLASHLOAN_PARAMS = '28';
  string public constant CT_CALLER_MUST_BE_LENDING_POOL = '29'; // 'The caller of this function must be a lending pool'
  string public constant CT_CANNOT_GIVE_ALLOWANCE_TO_HIMSELF = '30'; // 'User cannot give allowance to himself'
  string public constant CT_TRANSFER_AMOUNT_NOT_GT_0 = '31'; // 'Transferred amount needs to be greater than zero'
  string public constant RL_RESERVE_ALREADY_INITIALIZED = '32'; // 'Reserve has already been initialized'
  string public constant LPC_RESERVE_LIQUIDITY_NOT_0 = '34'; // 'The liquidity of the reserve needs to be 0'
  string public constant LPC_INVALID_ATOKEN_POOL_ADDRESS = '35'; // 'The liquidity of the reserve needs to be 0'
  string public constant LPC_INVALID_STABLE_DEBT_TOKEN_POOL_ADDRESS = '36'; // 'The liquidity of the reserve needs to be 0'
  string public constant LPC_INVALID_VARIABLE_DEBT_TOKEN_POOL_ADDRESS = '37'; // 'The liquidity of the reserve needs to be 0'
  string public constant LPC_INVALID_STABLE_DEBT_TOKEN_UNDERLYING_ADDRESS = '38'; // 'The liquidity of the reserve needs to be 0'
  string public constant LPC_INVALID_VARIABLE_DEBT_TOKEN_UNDERLYING_ADDRESS = '39'; // 'The liquidity of the reserve needs to be 0'
  string public constant LPC_INVALID_ADDRESSES_PROVIDER_ID = '40'; // 'The liquidity of the reserve needs to be 0'
  string public constant LPC_INVALID_CONFIGURATION = '75'; // 'Invalid risk parameters for the reserve'
  string public constant LPC_CALLER_NOT_EMERGENCY_ADMIN = '76'; // 'The caller must be the emergency admin'
  string public constant LPAPR_PROVIDER_NOT_REGISTERED = '41'; // 'Provider is not registered'
  string public constant LPCM_HEALTH_FACTOR_NOT_BELOW_THRESHOLD = '42'; // 'Health factor is not below the threshold'
  string public constant LPCM_COLLATERAL_CANNOT_BE_LIQUIDATED = '43'; // 'The collateral chosen cannot be liquidated'
  string public constant LPCM_SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER = '44'; // 'User did not borrow the specified currency'
  string public constant LPCM_NOT_ENOUGH_LIQUIDITY_TO_LIQUIDATE = '45'; // "There isn't enough liquidity available to liquidate"
  string public constant LPCM_NO_ERRORS = '46'; // 'No errors'
  string public constant LP_INVALID_FLASHLOAN_MODE = '47'; //Invalid flashloan mode selected
  string public constant MATH_MULTIPLICATION_OVERFLOW = '48';
  string public constant MATH_ADDITION_OVERFLOW = '49';
  string public constant MATH_DIVISION_BY_ZERO = '50';
  string public constant RL_LIQUIDITY_INDEX_OVERFLOW = '51'; //  Liquidity index overflows uint128
  string public constant RL_VARIABLE_BORROW_INDEX_OVERFLOW = '52'; //  Variable borrow index overflows uint128
  string public constant RL_LIQUIDITY_RATE_OVERFLOW = '53'; //  Liquidity rate overflows uint128
  string public constant RL_VARIABLE_BORROW_RATE_OVERFLOW = '54'; //  Variable borrow rate overflows uint128
  string public constant RL_STABLE_BORROW_RATE_OVERFLOW = '55'; //  Stable borrow rate overflows uint128
  string public constant CT_INVALID_MINT_AMOUNT = '56'; //invalid amount to mint
  string public constant LP_FAILED_REPAY_WITH_COLLATERAL = '57';
  string public constant CT_INVALID_BURN_AMOUNT = '58'; //invalid amount to burn
  string public constant LP_FAILED_COLLATERAL_SWAP = '60';
  string public constant LP_INVALID_EQUAL_ASSETS_TO_SWAP = '61';
  string public constant LP_REENTRANCY_NOT_ALLOWED = '62';
  string public constant LP_CALLER_MUST_BE_AN_ATOKEN = '63';
  string public constant LP_IS_PAUSED = '64'; // 'Pool is paused'
  string public constant LP_NO_MORE_RESERVES_ALLOWED = '65';
  string public constant LP_INVALID_FLASH_LOAN_EXECUTOR_RETURN = '66';
  string public constant RC_INVALID_LTV = '67';
  string public constant RC_INVALID_LIQ_THRESHOLD = '68';
  string public constant RC_INVALID_LIQ_BONUS = '69';
  string public constant RC_INVALID_DECIMALS = '70';
  string public constant RC_INVALID_RESERVE_FACTOR = '71';
  string public constant LPAPR_INVALID_ADDRESSES_PROVIDER_ID = '72';
  string public constant VL_INCONSISTENT_FLASHLOAN_PARAMS = '73';
  string public constant LP_INCONSISTENT_PARAMS_LENGTH = '74';
  string public constant UL_INVALID_INDEX = '77';
  string public constant LP_NOT_CONTRACT = '78';
  string public constant SDT_STABLE_DEBT_OVERFLOW = '79';
  string public constant SDT_BURN_EXCEEDS_BALANCE = '80';

  enum CollateralManagerErrors {
    NO_ERROR,
    NO_COLLATERAL_AVAILABLE,
    COLLATERAL_CANNOT_BE_LIQUIDATED,
    CURRRENCY_NOT_BORROWED,
    HEALTH_FACTOR_ABOVE_THRESHOLD,
    NOT_ENOUGH_LIQUIDITY,
    NO_ACTIVE_RESERVE,
    HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD,
    INVALID_EQUAL_ASSETS_TO_SWAP,
    FROZEN_RESERVE
  }
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;

import {Errors} from '../helpers/Errors.sol';

/**
 * @title PercentageMath library
 * @author Aave
 * @notice Provides functions to perform percentage calculations
 * @dev Percentages are defined by default with 2 decimals of precision (100.00). The precision is indicated by PERCENTAGE_FACTOR
 * @dev Operations are rounded half up
 **/

library PercentageMath {
  uint256 constant PERCENTAGE_FACTOR = 1e4; //percentage plus two decimals
  uint256 constant HALF_PERCENT = PERCENTAGE_FACTOR / 2;

  /**
   * @dev Executes a percentage multiplication
   * @param value The value of which the percentage needs to be calculated
   * @param percentage The percentage of the value to be calculated
   * @return The percentage of value
   **/
  function percentMul(uint256 value, uint256 percentage) internal pure returns (uint256) {
    if (value == 0 || percentage == 0) {
      return 0;
    }

    require(
      value <= (type(uint256).max - HALF_PERCENT) / percentage,
      Errors.MATH_MULTIPLICATION_OVERFLOW
    );

    return (value * percentage + HALF_PERCENT) / PERCENTAGE_FACTOR;
  }

  /**
   * @dev Executes a percentage division
   * @param value The value of which the percentage needs to be calculated
   * @param percentage The percentage of the value to be calculated
   * @return The value divided the percentage
   **/
  function percentDiv(uint256 value, uint256 percentage) internal pure returns (uint256) {
    require(percentage != 0, Errors.MATH_DIVISION_BY_ZERO);
    uint256 halfPercentage = percentage / 2;

    require(
      value <= (type(uint256).max - halfPercentage) / PERCENTAGE_FACTOR,
      Errors.MATH_MULTIPLICATION_OVERFLOW
    );

    return (value * PERCENTAGE_FACTOR + halfPercentage) / percentage;
  }
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;

import {Errors} from '../helpers/Errors.sol';
import {SignedSafeMath} from '../../../dependencies/openzeppelin/contracts/SignedSafeMath.sol';

/**
 * @title WadRayMath library
 * @author Aave
 * @dev Provides mul and div function for wads (decimal numbers with 18 digits precision) and rays (decimals with 27 digits)
 **/

library WadRayMath {
  using SignedSafeMath for int256;

  uint256 internal constant WAD = 1e18;
  uint256 internal constant halfWAD = WAD / 2;

  uint256 internal constant RAY = 1e27;
  uint256 internal constant halfRAY = RAY / 2;

  int256 internal constant RAYint = 1e27;
  int256 internal constant halfRAYint = RAYint / 2;

  uint256 internal constant WAD_RAY_RATIO = 1e9;
  int256 public constant MIN_INT256 = -2**255;
  int256 public constant MAX_INT256 = 2**255-1;

  /**
   * @return One ray, 1e27
   **/
  function ray() internal pure returns (uint256) {
    return RAY;
  }

  /**
   * @return One wad, 1e18
   **/

  function wad() internal pure returns (uint256) {
    return WAD;
  }

  /**
   * @return Half ray, 1e27/2
   **/
  function halfRay() internal pure returns (uint256) {
    return halfRAY;
  }

  /**
   * @return Half ray, 1e18/2
   **/
  function halfWad() internal pure returns (uint256) {
    return halfWAD;
  }

  /**
   * @dev Multiplies two wad, rounding half up to the nearest wad
   * @param a Wad
   * @param b Wad
   * @return The result of a*b, in wad
   **/
  function wadMul(uint256 a, uint256 b) internal pure returns (uint256) {
    if (a == 0 || b == 0) {
      return 0;
    }

    require(a <= (type(uint256).max - halfWAD) / b, Errors.MATH_MULTIPLICATION_OVERFLOW);

    return (a * b + halfWAD) / WAD;
  }

  /**
   * @dev Divides two wad, rounding half up to the nearest wad
   * @param a Wad
   * @param b Wad
   * @return The result of a/b, in wad
   **/
  function wadDiv(uint256 a, uint256 b) internal pure returns (uint256) {
    require(b != 0, Errors.MATH_DIVISION_BY_ZERO);
    uint256 halfB = b / 2;

    require(a <= (type(uint256).max - halfB) / WAD, Errors.MATH_MULTIPLICATION_OVERFLOW);

    return (a * WAD + halfB) / b;
  }

  /**
   * @dev Multiplies two ray, rounding half up to the nearest ray
   * @param a Ray
   * @param b Ray
   * @return The result of a*b, in ray
   **/
  function rayMul(uint256 a, uint256 b) internal pure returns (uint256) {
    if (a == 0 || b == 0) {
      return 0;
    }

    require(a <= (type(uint256).max - halfRAY) / b, Errors.MATH_MULTIPLICATION_OVERFLOW);

    return (a * b + halfRAY) / RAY;
  }

  /**
   * @dev Divides two ray, rounding half up to the nearest ray
   * @param a Ray
   * @param b Ray
   * @return The result of a/b, in ray
   **/
  function rayDiv(uint256 a, uint256 b) internal pure returns (uint256) {
    require(b != 0, Errors.MATH_DIVISION_BY_ZERO);
    uint256 halfB = b / 2;

    require(a <= (type(uint256).max - halfB) / RAY, Errors.MATH_MULTIPLICATION_OVERFLOW);

    return (a * RAY + halfB) / b;
  }

  /**
   * @dev Casts ray down to wad
   * @param a Ray
   * @return a casted to wad, rounded half up to the nearest wad
   **/
  function rayToWad(uint256 a) internal pure returns (uint256) {
    uint256 halfRatio = WAD_RAY_RATIO / 2;
    uint256 result = halfRatio + a;
    require(result >= halfRatio, Errors.MATH_ADDITION_OVERFLOW);

    return result / WAD_RAY_RATIO;
  }

  /**
   * @dev Converts wad up to ray
   * @param a Wad
   * @return a converted in ray
   **/
  function wadToRay(uint256 a) internal pure returns (uint256) {
    uint256 result = a * WAD_RAY_RATIO;
    require(result / WAD_RAY_RATIO == a, Errors.MATH_MULTIPLICATION_OVERFLOW);
    return result;
  }

    // ------- int -------

  /**
   * @dev Multiplies two ray int, rounding half up to the nearest ray.
   * If `result` > 0 round up, if `result` < 0 round down.
   * @param a Ray int
   * @param b Ray int
   * @return result The result of a*b, in ray
   **/
  function rayMulInt(int256 a, int256 b) internal pure returns (int256) {
    int256 rawMul = a.mul(b);
    
    if (rawMul < 0) {
        return (rawMul.sub(halfRAYint)).div(RAYint);
    } else if (rawMul > 0) {
        return (rawMul.add(halfRAYint)).div(RAYint);
    } else { // if (a == 0 || b == 0)
      return 0;
    }
  }

  /**
   * @dev Divides two ray, rounding half up to the nearest ray
   * If `result` > 0 round up, if `result` < 0 round down.
   * @param a Ray int
   * @param b Ray int
   * @return The result of a/b, in ray
   **/
  function rayDivInt(int256 a, int256 b) internal pure returns (int256) {
    require(b != 0, Errors.MATH_DIVISION_BY_ZERO);
    int256 halfB = b / 2;

    if (a >= 0 && b > 0 || a <= 0 && b < 0) {
      return ((a.mul(RAYint)).add(halfB)).div(b);
    } else {
      return ((a.mul(RAYint)).sub(halfB)).div(b);
    }
  }

  /**
   * @dev `base` to the power of `exponent`, using rayMulInt and a for loop.
   * @param base Ray int
   * @param exponent power exponent, not ray
   * @return result The result of base**exponent, in ray
   **/
  function rayPowerInt(int256 base, uint256 exponent) internal pure returns (int256) {
    if (exponent == 0) {
        return 1;
    }
    int256 result = base;
    for (uint256 i = 1; i < exponent; i++) {
        result = rayMulInt(result, base);
    }
    return result;
  }
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;

library DataTypes {
  // refer to the whitepaper, section 1.1 basic concepts for a formal description of these properties.
  struct ReserveData {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    //the current stable borrow rate. Expressed in ray
    uint128 currentStableBorrowRate;
    uint40 lastUpdateTimestamp;
    //tokens addresses
    address aTokenAddress;
    address stableDebtTokenAddress;
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint8 id;
  }

  struct ReserveConfigurationMap {
    //bit 0-15: LTV
    //bit 16-31: Liq. threshold
    //bit 32-47: Liq. bonus
    //bit 48-55: Decimals
    //bit 56: Reserve is active
    //bit 57: reserve is frozen
    //bit 58: borrowing is enabled
    //bit 59: stable rate borrowing enabled
    //bit 60-63: reserved
    //bit 64-79: reserve factor
    uint256 data;
  }

  struct UserConfigurationMap {
    uint256 data;
  }

  enum InterestRateMode {NONE, STABLE, VARIABLE}
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;

import {ILendingPool} from '../../../interfaces/ILendingPool.sol';
import {ICreditDelegationToken} from '../../../interfaces/ICreditDelegationToken.sol';
import {
  VersionedInitializable
} from '../../libraries/aave-upgradeability/VersionedInitializable.sol';
import {IncentivizedERC20} from '../IncentivizedERC20.sol';
import {Errors} from '../../libraries/helpers/Errors.sol';

/**
 * @title DebtTokenBase
 * @notice Base contract for different types of debt tokens, like StableDebtToken or VariableDebtToken
 * @author Aave
 */

abstract contract DebtTokenBase is
  IncentivizedERC20('DEBTTOKEN_IMPL', 'DEBTTOKEN_IMPL', 0),
  VersionedInitializable,
  ICreditDelegationToken
{
  mapping(address => mapping(address => uint256)) internal _borrowAllowances;

  /**
   * @dev Only lending pool can call functions marked by this modifier
   **/
  modifier onlyLendingPool {
    require(_msgSender() == address(_getLendingPool()), Errors.CT_CALLER_MUST_BE_LENDING_POOL);
    _;
  }

  /**
   * @dev delegates borrowing power to a user on the specific debt token
   * @param delegatee the address receiving the delegated borrowing power
   * @param amount the maximum amount being delegated. Delegation will still
   * respect the liquidation constraints (even if delegated, a delegatee cannot
   * force a delegator HF to go below 1)
   **/
  function approveDelegation(address delegatee, uint256 amount) external override {
    _borrowAllowances[_msgSender()][delegatee] = amount;
    emit BorrowAllowanceDelegated(_msgSender(), delegatee, _getUnderlyingAssetAddress(), amount);
  }

  /**
   * @dev returns the borrow allowance of the user
   * @param fromUser The user to giving allowance
   * @param toUser The user to give allowance to
   * @return the current allowance of toUser
   **/
  function borrowAllowance(address fromUser, address toUser)
    external
    view
    override
    returns (uint256)
  {
    return _borrowAllowances[fromUser][toUser];
  }

  /**
   * @dev Being non transferrable, the debt token does not implement any of the
   * standard ERC20 functions for transfer and allowance.
   **/
  function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
    recipient;
    amount;
    revert('TRANSFER_NOT_SUPPORTED');
  }

  function allowance(address owner, address spender)
    public
    view
    virtual
    override
    returns (uint256)
  {
    owner;
    spender;
    revert('ALLOWANCE_NOT_SUPPORTED');
  }

  function approve(address spender, uint256 amount) public virtual override returns (bool) {
    spender;
    amount;
    revert('APPROVAL_NOT_SUPPORTED');
  }

  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) public virtual override returns (bool) {
    sender;
    recipient;
    amount;
    revert('TRANSFER_NOT_SUPPORTED');
  }

  function increaseAllowance(address spender, uint256 addedValue)
    public
    virtual
    override
    returns (bool)
  {
    spender;
    addedValue;
    revert('ALLOWANCE_NOT_SUPPORTED');
  }

  function decreaseAllowance(address spender, uint256 subtractedValue)
    public
    virtual
    override
    returns (bool)
  {
    spender;
    subtractedValue;
    revert('ALLOWANCE_NOT_SUPPORTED');
  }

  function _decreaseBorrowAllowance(
    address delegator,
    address delegatee,
    uint256 amount
  ) internal {
    uint256 newAllowance =
      _borrowAllowances[delegator][delegatee].sub(amount, Errors.BORROW_ALLOWANCE_NOT_ENOUGH);

    _borrowAllowances[delegator][delegatee] = newAllowance;

    emit BorrowAllowanceDelegated(delegator, delegatee, _getUnderlyingAssetAddress(), newAllowance);
  }

  function _getUnderlyingAssetAddress() internal view virtual returns (address);

  function _getLendingPool() internal view virtual returns (ILendingPool);
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;

import {Context} from '../../dependencies/openzeppelin/contracts/Context.sol';
import {IERC20} from '../../dependencies/openzeppelin/contracts/IERC20.sol';
import {IERC20Detailed} from '../../dependencies/openzeppelin/contracts/IERC20Detailed.sol';
import {SafeMath} from '../../dependencies/openzeppelin/contracts/SafeMath.sol';
import {IRewarder} from '../../interfaces/IRewarder.sol';

/**
 * @title ERC20
 * @notice Basic ERC20 implementation
 * @author Aave, inspired by the Openzeppelin ERC20 implementation
 **/
abstract contract IncentivizedERC20 is Context, IERC20, IERC20Detailed {
  using SafeMath for uint256;

  mapping(address => uint256) internal _balances;

  mapping(address => mapping(address => uint256)) private _allowances;
  uint256 internal _totalSupply;
  string private _name;
  string private _symbol;
  uint8 private _decimals;

  constructor(
    string memory name,
    string memory symbol,
    uint8 decimals
  ) public {
    _name = name;
    _symbol = symbol;
    _decimals = decimals;
  }

  /**
   * @return The name of the token
   **/
  function name() public view override returns (string memory) {
    return _name;
  }

  /**
   * @return The symbol of the token
   **/
  function symbol() public view override returns (string memory) {
    return _symbol;
  }

  /**
   * @return The decimals of the token
   **/
  function decimals() public view override returns (uint8) {
    return _decimals;
  }

  /**
   * @return The total supply of the token
   **/
  function totalSupply() public view virtual override returns (uint256) {
    return _totalSupply;
  }

  /**
   * @return The balance of the token
   **/
  function balanceOf(address account) public view virtual override returns (uint256) {
    return _balances[account];
  }

  /**
   * @return Abstract function implemented by the child aToken/debtToken. 
   * Done this way in order to not break compatibility with previous versions of aTokens/debtTokens
   **/
  function _getIncentivesController() internal view virtual returns(IRewarder);

  /**
   * @dev Executes a transfer of tokens from _msgSender() to recipient
   * @param recipient The recipient of the tokens
   * @param amount The amount of tokens being transferred
   * @return `true` if the transfer succeeds, `false` otherwise
   **/
  function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
    _transfer(_msgSender(), recipient, amount);
    emit Transfer(_msgSender(), recipient, amount);
    return true;
  }

  /**
   * @dev Returns the allowance of spender on the tokens owned by owner
   * @param owner The owner of the tokens
   * @param spender The user allowed to spend the owner's tokens
   * @return The amount of owner's tokens spender is allowed to spend
   **/
  function allowance(address owner, address spender)
    public
    view
    virtual
    override
    returns (uint256)
  {
    return _allowances[owner][spender];
  }

  /**
   * @dev Allows `spender` to spend the tokens owned by _msgSender()
   * @param spender The user allowed to spend _msgSender() tokens
   * @return `true`
   **/
  function approve(address spender, uint256 amount) public virtual override returns (bool) {
    _approve(_msgSender(), spender, amount);
    return true;
  }

  /**
   * @dev Executes a transfer of token from sender to recipient, if _msgSender() is allowed to do so
   * @param sender The owner of the tokens
   * @param recipient The recipient of the tokens
   * @param amount The amount of tokens being transferred
   * @return `true` if the transfer succeeds, `false` otherwise
   **/
  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) public virtual override returns (bool) {
    _transfer(sender, recipient, amount);
    _approve(
      sender,
      _msgSender(),
      _allowances[sender][_msgSender()].sub(amount, 'ERC20: transfer amount exceeds allowance')
    );
    emit Transfer(sender, recipient, amount);
    return true;
  }

  /**
   * @dev Increases the allowance of spender to spend _msgSender() tokens
   * @param spender The user allowed to spend on behalf of _msgSender()
   * @param addedValue The amount being added to the allowance
   * @return `true`
   **/
  function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
    _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
    return true;
  }

  /**
   * @dev Decreases the allowance of spender to spend _msgSender() tokens
   * @param spender The user allowed to spend on behalf of _msgSender()
   * @param subtractedValue The amount being subtracted to the allowance
   * @return `true`
   **/
  function decreaseAllowance(address spender, uint256 subtractedValue)
    public
    virtual
    returns (bool)
  {
    _approve(
      _msgSender(),
      spender,
      _allowances[_msgSender()][spender].sub(
        subtractedValue,
        'ERC20: decreased allowance below zero'
      )
    );
    return true;
  }

  function _transfer(
    address sender,
    address recipient,
    uint256 amount
  ) internal virtual {
    require(sender != address(0), 'ERC20: transfer from the zero address');
    require(recipient != address(0), 'ERC20: transfer to the zero address');

    _beforeTokenTransfer(sender, recipient, amount);

    uint256 oldSenderBalance = _balances[sender];
    _balances[sender] = oldSenderBalance.sub(amount, 'ERC20: transfer amount exceeds balance');
    uint256 oldRecipientBalance = _balances[recipient];
    _balances[recipient] = _balances[recipient].add(amount);

    if (address(_getIncentivesController()) != address(0)) {
      uint256 currentTotalSupply = _totalSupply;
      _getIncentivesController().handleAction(sender, currentTotalSupply, oldSenderBalance);
      if (sender != recipient) {
        _getIncentivesController().handleAction(recipient, currentTotalSupply, oldRecipientBalance);
      }
    }
  }

  function _mint(address account, uint256 amount) internal virtual {
    require(account != address(0), 'ERC20: mint to the zero address');

    _beforeTokenTransfer(address(0), account, amount);

    uint256 oldTotalSupply = _totalSupply;
    _totalSupply = oldTotalSupply.add(amount);

    uint256 oldAccountBalance = _balances[account];
    _balances[account] = oldAccountBalance.add(amount);

    if (address(_getIncentivesController()) != address(0)) {
      _getIncentivesController().handleAction(account, oldTotalSupply, oldAccountBalance);
    }
  }

  function _burn(address account, uint256 amount) internal virtual {
    require(account != address(0), 'ERC20: burn from the zero address');

    _beforeTokenTransfer(account, address(0), amount);

    uint256 oldTotalSupply = _totalSupply;
    _totalSupply = oldTotalSupply.sub(amount);

    uint256 oldAccountBalance = _balances[account];
    _balances[account] = oldAccountBalance.sub(amount, 'ERC20: burn amount exceeds balance');

    if (address(_getIncentivesController()) != address(0)) {
      _getIncentivesController().handleAction(account, oldTotalSupply, oldAccountBalance);
    }
  }

  function _approve(
    address owner,
    address spender,
    uint256 amount
  ) internal virtual {
    require(owner != address(0), 'ERC20: approve from the zero address');
    require(spender != address(0), 'ERC20: approve to the zero address');

    _allowances[owner][spender] = amount;
    emit Approval(owner, spender, amount);
  }

  function _setName(string memory newName) internal {
    _name = newName;
  }

  function _setSymbol(string memory newSymbol) internal {
    _symbol = newSymbol;
  }

  function _setDecimals(uint8 newDecimals) internal {
    _decimals = newDecimals;
  }

  function _beforeTokenTransfer(
    address from,
    address to,
    uint256 amount
  ) internal virtual {}
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;

import {IVariableDebtToken} from '../../interfaces/IVariableDebtToken.sol';
import {WadRayMath} from '../libraries/math/WadRayMath.sol';
import {Errors} from '../libraries/helpers/Errors.sol';
import {DebtTokenBase} from './base/DebtTokenBase.sol';
import {ILendingPool} from '../../interfaces/ILendingPool.sol';
import {IRewarder} from '../../interfaces/IRewarder.sol';

/**
 * @title VariableDebtToken
 * @notice Implements a variable debt token to track the borrowing positions of users
 * at variable rate mode
 * @author Aave
 **/
contract VariableDebtToken is DebtTokenBase, IVariableDebtToken {
  using WadRayMath for uint256;

  uint256 public constant DEBT_TOKEN_REVISION = 0x1;

  ILendingPool internal _pool;
  address internal _underlyingAsset;
  IRewarder internal _incentivesController;

  /**
   * @dev Initializes the debt token.
   * @param pool The address of the lending pool where this aToken will be used
   * @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @param incentivesController The smart contract managing potential incentives distribution
   * @param debtTokenDecimals The decimals of the debtToken, same as the underlying asset's
   * @param debtTokenName The name of the token
   * @param debtTokenSymbol The symbol of the token
   */
  function initialize(
    ILendingPool pool,
    address underlyingAsset,
    IRewarder incentivesController,
    uint8 debtTokenDecimals,
    string memory debtTokenName,
    string memory debtTokenSymbol,
    bytes calldata params
  ) public override initializer {
    _setName(debtTokenName);
    _setSymbol(debtTokenSymbol);
    _setDecimals(debtTokenDecimals);

    _pool = pool;
    _underlyingAsset = underlyingAsset;
    _incentivesController = incentivesController;

    emit Initialized(
      underlyingAsset,
      address(pool),
      address(incentivesController),
      debtTokenDecimals,
      debtTokenName,
      debtTokenSymbol,
      params
    );
  }

  /**
   * @dev Gets the revision of the stable debt token implementation
   * @return The debt token implementation revision
   **/
  function getRevision() internal pure virtual override returns (uint256) {
    return DEBT_TOKEN_REVISION;
  }

  /**
   * @dev Calculates the accumulated debt balance of the user
   * @return The debt balance of the user
   **/
  function balanceOf(address user) public view virtual override returns (uint256) {
    uint256 scaledBalance = super.balanceOf(user);

    if (scaledBalance == 0) {
      return 0;
    }

    return scaledBalance.rayMul(_pool.getReserveNormalizedVariableDebt(_underlyingAsset));
  }

  /**
   * @dev Mints debt token to the `onBehalfOf` address
   * -  Only callable by the LendingPool
   * @param user The address receiving the borrowed underlying, being the delegatee in case
   * of credit delegate, or same as `onBehalfOf` otherwise
   * @param onBehalfOf The address receiving the debt tokens
   * @param amount The amount of debt being minted
   * @param index The variable debt index of the reserve
   * @return `true` if the the previous balance of the user is 0
   **/
  function mint(
    address user,
    address onBehalfOf,
    uint256 amount,
    uint256 index
  ) external override onlyLendingPool returns (bool) {
    if (user != onBehalfOf) {
      _decreaseBorrowAllowance(onBehalfOf, user, amount);
    }

    uint256 previousBalance = super.balanceOf(onBehalfOf);
    uint256 amountScaled = amount.rayDiv(index);
    require(amountScaled != 0, Errors.CT_INVALID_MINT_AMOUNT);

    _mint(onBehalfOf, amountScaled);

    emit Transfer(address(0), onBehalfOf, amount);
    emit Mint(user, onBehalfOf, amount, index);

    return previousBalance == 0;
  }

  /**
   * @dev Burns user variable debt
   * - Only callable by the LendingPool
   * @param user The user whose debt is getting burned
   * @param amount The amount getting burned
   * @param index The variable debt index of the reserve
   **/
  function burn(
    address user,
    uint256 amount,
    uint256 index
  ) external override onlyLendingPool {
    uint256 amountScaled = amount.rayDiv(index);
    require(amountScaled != 0, Errors.CT_INVALID_BURN_AMOUNT);

    _burn(user, amountScaled);

    emit Transfer(user, address(0), amount);
    emit Burn(user, amount, index);
  }

  /**
   * @dev Returns the principal debt balance of the user from
   * @return The debt balance of the user since the last burn/mint action
   **/
  function scaledBalanceOf(address user) public view virtual override returns (uint256) {
    return super.balanceOf(user);
  }

  /**
   * @dev Returns the total supply of the variable debt token. Represents the total debt accrued by the users
   * @return The total supply
   **/
  function totalSupply() public view virtual override returns (uint256) {
    return super.totalSupply().rayMul(_pool.getReserveNormalizedVariableDebt(_underlyingAsset));
  }

  /**
   * @dev Returns the scaled total supply of the variable debt token. Represents sum(debt/index)
   * @return the scaled total supply
   **/
  function scaledTotalSupply() public view virtual override returns (uint256) {
    return super.totalSupply();
  }

  /**
   * @dev Returns the principal balance of the user and principal total supply.
   * @param user The address of the user
   * @return The principal balance of the user
   * @return The principal total supply
   **/
  function getScaledUserBalanceAndSupply(address user)
    external
    view
    override
    returns (uint256, uint256)
  {
    return (super.balanceOf(user), super.totalSupply());
  }

  /**
   * @dev Returns the address of the underlying asset of this aToken (E.g. WETH for aWETH)
   **/
  function UNDERLYING_ASSET_ADDRESS() public view returns (address) {
    return _underlyingAsset;
  }

  /**
   * @dev Returns the address of the incentives controller contract
   **/
  function getIncentivesController() external view override returns (IRewarder) {
    return _getIncentivesController();
  }

  /**
   * @dev Returns the address of the lending pool where this aToken is used
   **/
  function POOL() public view returns (ILendingPool) {
    return _pool;
  }

  function _getIncentivesController() internal view override returns (IRewarder) {
    return _incentivesController;
  }

  function _getUnderlyingAssetAddress() internal view override returns (address) {
    return _underlyingAsset;
  }

  function _getLendingPool() internal view override returns (ILendingPool) {
    return _pool;
  }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"contract ILendingPoolAddressesProvider","name":"provider","type":"address"},{"internalType":"address","name":"asset","type":"address"},{"internalType":"int256","name":"minControllerError","type":"int256"},{"internalType":"int256","name":"maxITimeAmp","type":"int256"},{"internalType":"uint256","name":"optimalUtilizationRate","type":"uint256"},{"internalType":"uint256","name":"kp","type":"uint256"},{"internalType":"uint256","name":"ki","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"utilizationRate","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"currentLiquidityRate","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"currentVariableBorrowRate","type":"uint256"},{"indexed":false,"internalType":"int256","name":"err","type":"int256"},{"indexed":false,"internalType":"int256","name":"controllerErr","type":"int256"}],"name":"PidLog","type":"event"},{"inputs":[],"name":"MAX_INT256","outputs":[{"internalType":"int256","name":"","type":"int256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MIN_INT256","outputs":[{"internalType":"int256","name":"","type":"int256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"M_FACTOR","outputs":[{"internalType":"int256","name":"","type":"int256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"N_FACTOR","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"RAY","outputs":[{"internalType":"int256","name":"","type":"int256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"_addressesProvider","outputs":[{"internalType":"contract ILendingPoolAddressesProvider","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"_asset","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"_errI","outputs":[{"internalType":"int256","name":"","type":"int256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"_ki","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"_kp","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"_lastTimestamp","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"_maxErrIAmp","outputs":[{"internalType":"int256","name":"","type":"int256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"_minControllerError","outputs":[{"internalType":"int256","name":"","type":"int256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"_optimalUtilizationRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"baseVariableBorrowRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"reserve","type":"address"},{"internalType":"address","name":"aToken","type":"address"},{"internalType":"uint256","name":"liquidityAdded","type":"uint256"},{"internalType":"uint256","name":"liquidityTaken","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"totalVariableDebt","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"reserveFactor","type":"uint256"}],"name":"calculateInterestRates","outputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"availableLiquidity","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"totalVariableDebt","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"reserveFactor","type":"uint256"}],"name":"calculateInterestRates","outputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"getCurrentInterestRates","outputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getMaxVariableBorrowRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"int256","name":"minControllerError","type":"int256"}],"name":"setMinControllerError","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"optimalUtilizationRate","type":"uint256"}],"name":"setOptimalUtilizationRate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"kp","type":"uint256"},{"internalType":"uint256","name":"ki","type":"uint256"},{"internalType":"int256","name":"maxITimeAmp","type":"int256"}],"name":"setPidValues","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"int256","name":"controllerError","type":"int256"}],"name":"transferFunction","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

000000000000000000000000d5d5467074381ed85b93d498899cf4c90142de4900000000000000000000000050c42deacd8fc9773493ed674b675be577f2634bfffffffffffffffffffffffffffffffffffffffffd6a416919bf9968e0000000000000000000000000000000000000000000000000000000000000000013c6800000000000000000000000000000000000000000026c62ad77dc602dae0000000000000000000000000000000000000000000000033b2e3c9fd0803ce800000000000000000000000000000000000000000000000000000821ab0d4414980000

-----Decoded View---------------
Arg [0] : provider (address): 0xD5d5467074381eD85B93d498899Cf4c90142dE49
Arg [1] : asset (address): 0x50c42dEAcD8Fc9773493ED674b675bE577f2634b
Arg [2] : minControllerError (int256): -800000000000000000000000000
Arg [3] : maxITimeAmp (int256): 1296000
Arg [4] : optimalUtilizationRate (uint256): 750000000000000000000000000
Arg [5] : kp (uint256): 1000000000000000000000000000
Arg [6] : ki (uint256): 150000000000000000000

-----Encoded View---------------
7 Constructor Arguments found :
Arg [0] : 000000000000000000000000d5d5467074381ed85b93d498899cf4c90142de49
Arg [1] : 00000000000000000000000050c42deacd8fc9773493ed674b675be577f2634b
Arg [2] : fffffffffffffffffffffffffffffffffffffffffd6a416919bf9968e0000000
Arg [3] : 000000000000000000000000000000000000000000000000000000000013c680
Arg [4] : 0000000000000000000000000000000000000000026c62ad77dc602dae000000
Arg [5] : 0000000000000000000000000000000000000000033b2e3c9fd0803ce8000000
Arg [6] : 00000000000000000000000000000000000000000000000821ab0d4414980000