Overview
S Balance
0 S
S Value
-More Info
Private Name Tags
ContractCreator
Loading...
Loading
This contract may be a proxy contract. Click on More Options and select Is this a proxy? to confirm and enable the "Read as Proxy" & "Write as Proxy" tabs.
Contract Source Code Verified (Exact Match)
Contract Name:
Treasury
Compiler Version
v0.8.28+commit.7893614a
Optimization Enabled:
Yes with 9999999 runs
Other Settings:
cancun EvmVersion
Contract Source Code (Solidity Standard Json-Input format)
// SPDX-License-Identifier: MIT pragma solidity ^0.8.28; import {UUPSUpgradeable} from "@openzeppelin/contracts-upgradeable/proxy/utils/UUPSUpgradeable.sol"; import {OwnableUpgradeable} from "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol"; import {EnumerableMap} from "@openzeppelin/contracts/utils/structs/EnumerableMap.sol"; import {IBrushToken} from "./interfaces/external/IBrushToken.sol"; contract Treasury is UUPSUpgradeable, OwnableUpgradeable { using EnumerableMap for EnumerableMap.AddressToUintMap; event SetFundAllocationPercentages(address[] accounts, uint256[] percentages); error OnlyTerritories(); error OnlySpenders(); error LengthMismatch(); error TotalPercentageNot100(uint256 percent); EnumerableMap.AddressToUintMap private _accountsToPercentage; IBrushToken private _brush; address private _territories; mapping(address spender => bool) private _spenders; modifier onlySpenders() { require(_isSpender(_msgSender()), OnlySpenders()); _; } /// @custom:oz-upgrades-unsafe-allow constructor constructor() { _disableInitializers(); } function initialize(IBrushToken brush) external initializer { __Ownable_init(_msgSender()); __UUPSUpgradeable_init(); _brush = brush; } function _isSpender(address operator) private view returns (bool) { return _spenders[operator]; } function totalClaimable(address account) public view returns (uint256 total) { (bool success, uint256 percent) = _accountsToPercentage.tryGet(account); if (!success) { return 0; } return (_brush.balanceOf(address(this)) * percent) / 100; } function spend(address to, uint256 amountBrush) external onlySpenders { _brush.transfer(to, amountBrush); } // What accounts are given access to what funds of the treasury function setFundAllocationPercentages( address[] calldata accounts, uint256[] calldata percentages ) external onlyOwner { require(accounts.length == percentages.length, LengthMismatch()); uint256 totalPercentage; // Clear the old accounts uint256 length = _accountsToPercentage.length(); for (uint256 i = 0; i < length; ++i) { (address account, ) = _accountsToPercentage.at(0); _accountsToPercentage.remove(account); } for (uint256 i = 0; i < accounts.length; ++i) { _accountsToPercentage.set(accounts[i], percentages[i]); totalPercentage += percentages[i]; } require(totalPercentage == 100, TotalPercentageNot100(totalPercentage)); emit SetFundAllocationPercentages(accounts, percentages); } function setSpenders(address[] calldata spenders, bool isSpender) external onlyOwner { for (uint256 i; i < spenders.length; ++i) { _spenders[spenders[i]] = isSpender; } } // solhint-disable-next-line no-empty-blocks function _authorizeUpgrade(address newImplementation) internal override onlyOwner {} }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol) pragma solidity ^0.8.20; import {ContextUpgradeable} from "../utils/ContextUpgradeable.sol"; import {Initializable} from "../proxy/utils/Initializable.sol"; /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * The initial owner is set to the address provided by the deployer. This can * later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable { /// @custom:storage-location erc7201:openzeppelin.storage.Ownable struct OwnableStorage { address _owner; } // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Ownable")) - 1)) & ~bytes32(uint256(0xff)) bytes32 private constant OwnableStorageLocation = 0x9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c199300; function _getOwnableStorage() private pure returns (OwnableStorage storage $) { assembly ("memory-safe") { $.slot := OwnableStorageLocation } } /** * @dev The caller account is not authorized to perform an operation. */ error OwnableUnauthorizedAccount(address account); /** * @dev The owner is not a valid owner account. (eg. `address(0)`) */ error OwnableInvalidOwner(address owner); event OwnershipTransferred(address indexed previousOwner, address indexed newOwner); /** * @dev Initializes the contract setting the address provided by the deployer as the initial owner. */ function __Ownable_init(address initialOwner) internal onlyInitializing { __Ownable_init_unchained(initialOwner); } function __Ownable_init_unchained(address initialOwner) internal onlyInitializing { if (initialOwner == address(0)) { revert OwnableInvalidOwner(address(0)); } _transferOwnership(initialOwner); } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { _checkOwner(); _; } /** * @dev Returns the address of the current owner. */ function owner() public view virtual returns (address) { OwnableStorage storage $ = _getOwnableStorage(); return $._owner; } /** * @dev Throws if the sender is not the owner. */ function _checkOwner() internal view virtual { if (owner() != _msgSender()) { revert OwnableUnauthorizedAccount(_msgSender()); } } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby disabling any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { _transferOwnership(address(0)); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { if (newOwner == address(0)) { revert OwnableInvalidOwner(address(0)); } _transferOwnership(newOwner); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Internal function without access restriction. */ function _transferOwnership(address newOwner) internal virtual { OwnableStorage storage $ = _getOwnableStorage(); address oldOwner = $._owner; $._owner = newOwner; emit OwnershipTransferred(oldOwner, newOwner); } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (proxy/utils/Initializable.sol) pragma solidity ^0.8.20; /** * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect. * * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in * case an upgrade adds a module that needs to be initialized. * * For example: * * [.hljs-theme-light.nopadding] * ```solidity * contract MyToken is ERC20Upgradeable { * function initialize() initializer public { * __ERC20_init("MyToken", "MTK"); * } * } * * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable { * function initializeV2() reinitializer(2) public { * __ERC20Permit_init("MyToken"); * } * } * ``` * * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}. * * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity. * * [CAUTION] * ==== * Avoid leaving a contract uninitialized. * * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed: * * [.hljs-theme-light.nopadding] * ``` * /// @custom:oz-upgrades-unsafe-allow constructor * constructor() { * _disableInitializers(); * } * ``` * ==== */ abstract contract Initializable { /** * @dev Storage of the initializable contract. * * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions * when using with upgradeable contracts. * * @custom:storage-location erc7201:openzeppelin.storage.Initializable */ struct InitializableStorage { /** * @dev Indicates that the contract has been initialized. */ uint64 _initialized; /** * @dev Indicates that the contract is in the process of being initialized. */ bool _initializing; } // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Initializable")) - 1)) & ~bytes32(uint256(0xff)) bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00; /** * @dev The contract is already initialized. */ error InvalidInitialization(); /** * @dev The contract is not initializing. */ error NotInitializing(); /** * @dev Triggered when the contract has been initialized or reinitialized. */ event Initialized(uint64 version); /** * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope, * `onlyInitializing` functions can be used to initialize parent contracts. * * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in * production. * * Emits an {Initialized} event. */ modifier initializer() { // solhint-disable-next-line var-name-mixedcase InitializableStorage storage $ = _getInitializableStorage(); // Cache values to avoid duplicated sloads bool isTopLevelCall = !$._initializing; uint64 initialized = $._initialized; // Allowed calls: // - initialSetup: the contract is not in the initializing state and no previous version was // initialized // - construction: the contract is initialized at version 1 (no reininitialization) and the // current contract is just being deployed bool initialSetup = initialized == 0 && isTopLevelCall; bool construction = initialized == 1 && address(this).code.length == 0; if (!initialSetup && !construction) { revert InvalidInitialization(); } $._initialized = 1; if (isTopLevelCall) { $._initializing = true; } _; if (isTopLevelCall) { $._initializing = false; emit Initialized(1); } } /** * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be * used to initialize parent contracts. * * A reinitializer may be used after the original initialization step. This is essential to configure modules that * are added through upgrades and that require initialization. * * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer` * cannot be nested. If one is invoked in the context of another, execution will revert. * * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in * a contract, executing them in the right order is up to the developer or operator. * * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization. * * Emits an {Initialized} event. */ modifier reinitializer(uint64 version) { // solhint-disable-next-line var-name-mixedcase InitializableStorage storage $ = _getInitializableStorage(); if ($._initializing || $._initialized >= version) { revert InvalidInitialization(); } $._initialized = version; $._initializing = true; _; $._initializing = false; emit Initialized(version); } /** * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the * {initializer} and {reinitializer} modifiers, directly or indirectly. */ modifier onlyInitializing() { _checkInitializing(); _; } /** * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}. */ function _checkInitializing() internal view virtual { if (!_isInitializing()) { revert NotInitializing(); } } /** * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call. * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized * to any version. It is recommended to use this to lock implementation contracts that are designed to be called * through proxies. * * Emits an {Initialized} event the first time it is successfully executed. */ function _disableInitializers() internal virtual { // solhint-disable-next-line var-name-mixedcase InitializableStorage storage $ = _getInitializableStorage(); if ($._initializing) { revert InvalidInitialization(); } if ($._initialized != type(uint64).max) { $._initialized = type(uint64).max; emit Initialized(type(uint64).max); } } /** * @dev Returns the highest version that has been initialized. See {reinitializer}. */ function _getInitializedVersion() internal view returns (uint64) { return _getInitializableStorage()._initialized; } /** * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}. */ function _isInitializing() internal view returns (bool) { return _getInitializableStorage()._initializing; } /** * @dev Returns a pointer to the storage namespace. */ // solhint-disable-next-line var-name-mixedcase function _getInitializableStorage() private pure returns (InitializableStorage storage $) { assembly ("memory-safe") { $.slot := INITIALIZABLE_STORAGE } } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.1.0) (proxy/utils/UUPSUpgradeable.sol) pragma solidity ^0.8.20; import {IERC1822Proxiable} from "@openzeppelin/contracts/interfaces/draft-IERC1822.sol"; import {ERC1967Utils} from "@openzeppelin/contracts/proxy/ERC1967/ERC1967Utils.sol"; import {Initializable} from "./Initializable.sol"; /** * @dev An upgradeability mechanism designed for UUPS proxies. The functions included here can perform an upgrade of an * {ERC1967Proxy}, when this contract is set as the implementation behind such a proxy. * * A security mechanism ensures that an upgrade does not turn off upgradeability accidentally, although this risk is * reinstated if the upgrade retains upgradeability but removes the security mechanism, e.g. by replacing * `UUPSUpgradeable` with a custom implementation of upgrades. * * The {_authorizeUpgrade} function must be overridden to include access restriction to the upgrade mechanism. */ abstract contract UUPSUpgradeable is Initializable, IERC1822Proxiable { /// @custom:oz-upgrades-unsafe-allow state-variable-immutable address private immutable __self = address(this); /** * @dev The version of the upgrade interface of the contract. If this getter is missing, both `upgradeTo(address)` * and `upgradeToAndCall(address,bytes)` are present, and `upgradeTo` must be used if no function should be called, * while `upgradeToAndCall` will invoke the `receive` function if the second argument is the empty byte string. * If the getter returns `"5.0.0"`, only `upgradeToAndCall(address,bytes)` is present, and the second argument must * be the empty byte string if no function should be called, making it impossible to invoke the `receive` function * during an upgrade. */ string public constant UPGRADE_INTERFACE_VERSION = "5.0.0"; /** * @dev The call is from an unauthorized context. */ error UUPSUnauthorizedCallContext(); /** * @dev The storage `slot` is unsupported as a UUID. */ error UUPSUnsupportedProxiableUUID(bytes32 slot); /** * @dev Check that the execution is being performed through a delegatecall call and that the execution context is * a proxy contract with an implementation (as defined in ERC-1967) pointing to self. This should only be the case * for UUPS and transparent proxies that are using the current contract as their implementation. Execution of a * function through ERC-1167 minimal proxies (clones) would not normally pass this test, but is not guaranteed to * fail. */ modifier onlyProxy() { _checkProxy(); _; } /** * @dev Check that the execution is not being performed through a delegate call. This allows a function to be * callable on the implementing contract but not through proxies. */ modifier notDelegated() { _checkNotDelegated(); _; } function __UUPSUpgradeable_init() internal onlyInitializing { } function __UUPSUpgradeable_init_unchained() internal onlyInitializing { } /** * @dev Implementation of the ERC-1822 {proxiableUUID} function. This returns the storage slot used by the * implementation. It is used to validate the implementation's compatibility when performing an upgrade. * * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this * function revert if invoked through a proxy. This is guaranteed by the `notDelegated` modifier. */ function proxiableUUID() external view virtual notDelegated returns (bytes32) { return ERC1967Utils.IMPLEMENTATION_SLOT; } /** * @dev Upgrade the implementation of the proxy to `newImplementation`, and subsequently execute the function call * encoded in `data`. * * Calls {_authorizeUpgrade}. * * Emits an {Upgraded} event. * * @custom:oz-upgrades-unsafe-allow-reachable delegatecall */ function upgradeToAndCall(address newImplementation, bytes memory data) public payable virtual onlyProxy { _authorizeUpgrade(newImplementation); _upgradeToAndCallUUPS(newImplementation, data); } /** * @dev Reverts if the execution is not performed via delegatecall or the execution * context is not of a proxy with an ERC-1967 compliant implementation pointing to self. * See {_onlyProxy}. */ function _checkProxy() internal view virtual { if ( address(this) == __self || // Must be called through delegatecall ERC1967Utils.getImplementation() != __self // Must be called through an active proxy ) { revert UUPSUnauthorizedCallContext(); } } /** * @dev Reverts if the execution is performed via delegatecall. * See {notDelegated}. */ function _checkNotDelegated() internal view virtual { if (address(this) != __self) { // Must not be called through delegatecall revert UUPSUnauthorizedCallContext(); } } /** * @dev Function that should revert when `msg.sender` is not authorized to upgrade the contract. Called by * {upgradeToAndCall}. * * Normally, this function will use an xref:access.adoc[access control] modifier such as {Ownable-onlyOwner}. * * ```solidity * function _authorizeUpgrade(address) internal onlyOwner {} * ``` */ function _authorizeUpgrade(address newImplementation) internal virtual; /** * @dev Performs an implementation upgrade with a security check for UUPS proxies, and additional setup call. * * As a security check, {proxiableUUID} is invoked in the new implementation, and the return value * is expected to be the implementation slot in ERC-1967. * * Emits an {IERC1967-Upgraded} event. */ function _upgradeToAndCallUUPS(address newImplementation, bytes memory data) private { try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) { if (slot != ERC1967Utils.IMPLEMENTATION_SLOT) { revert UUPSUnsupportedProxiableUUID(slot); } ERC1967Utils.upgradeToAndCall(newImplementation, data); } catch { // The implementation is not UUPS revert ERC1967Utils.ERC1967InvalidImplementation(newImplementation); } } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol) pragma solidity ^0.8.20; import {Initializable} from "../proxy/utils/Initializable.sol"; /** * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract ContextUpgradeable is Initializable { function __Context_init() internal onlyInitializing { } function __Context_init_unchained() internal onlyInitializing { } function _msgSender() internal view virtual returns (address) { return msg.sender; } function _msgData() internal view virtual returns (bytes calldata) { return msg.data; } function _contextSuffixLength() internal view virtual returns (uint256) { return 0; } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.1.0) (interfaces/draft-IERC1822.sol) pragma solidity ^0.8.20; /** * @dev ERC-1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified * proxy whose upgrades are fully controlled by the current implementation. */ interface IERC1822Proxiable { /** * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation * address. * * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this * function revert if invoked through a proxy. */ function proxiableUUID() external view returns (bytes32); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC1967.sol) pragma solidity ^0.8.20; /** * @dev ERC-1967: Proxy Storage Slots. This interface contains the events defined in the ERC. */ interface IERC1967 { /** * @dev Emitted when the implementation is upgraded. */ event Upgraded(address indexed implementation); /** * @dev Emitted when the admin account has changed. */ event AdminChanged(address previousAdmin, address newAdmin); /** * @dev Emitted when the beacon is changed. */ event BeaconUpgraded(address indexed beacon); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (proxy/beacon/IBeacon.sol) pragma solidity ^0.8.20; /** * @dev This is the interface that {BeaconProxy} expects of its beacon. */ interface IBeacon { /** * @dev Must return an address that can be used as a delegate call target. * * {UpgradeableBeacon} will check that this address is a contract. */ function implementation() external view returns (address); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.1.0) (proxy/ERC1967/ERC1967Utils.sol) pragma solidity ^0.8.21; import {IBeacon} from "../beacon/IBeacon.sol"; import {IERC1967} from "../../interfaces/IERC1967.sol"; import {Address} from "../../utils/Address.sol"; import {StorageSlot} from "../../utils/StorageSlot.sol"; /** * @dev This library provides getters and event emitting update functions for * https://eips.ethereum.org/EIPS/eip-1967[ERC-1967] slots. */ library ERC1967Utils { /** * @dev Storage slot with the address of the current implementation. * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1. */ // solhint-disable-next-line private-vars-leading-underscore bytes32 internal constant IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc; /** * @dev The `implementation` of the proxy is invalid. */ error ERC1967InvalidImplementation(address implementation); /** * @dev The `admin` of the proxy is invalid. */ error ERC1967InvalidAdmin(address admin); /** * @dev The `beacon` of the proxy is invalid. */ error ERC1967InvalidBeacon(address beacon); /** * @dev An upgrade function sees `msg.value > 0` that may be lost. */ error ERC1967NonPayable(); /** * @dev Returns the current implementation address. */ function getImplementation() internal view returns (address) { return StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value; } /** * @dev Stores a new address in the ERC-1967 implementation slot. */ function _setImplementation(address newImplementation) private { if (newImplementation.code.length == 0) { revert ERC1967InvalidImplementation(newImplementation); } StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value = newImplementation; } /** * @dev Performs implementation upgrade with additional setup call if data is nonempty. * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected * to avoid stuck value in the contract. * * Emits an {IERC1967-Upgraded} event. */ function upgradeToAndCall(address newImplementation, bytes memory data) internal { _setImplementation(newImplementation); emit IERC1967.Upgraded(newImplementation); if (data.length > 0) { Address.functionDelegateCall(newImplementation, data); } else { _checkNonPayable(); } } /** * @dev Storage slot with the admin of the contract. * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1. */ // solhint-disable-next-line private-vars-leading-underscore bytes32 internal constant ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103; /** * @dev Returns the current admin. * * TIP: To get this value clients can read directly from the storage slot shown below (specified by ERC-1967) using * the https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call. * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103` */ function getAdmin() internal view returns (address) { return StorageSlot.getAddressSlot(ADMIN_SLOT).value; } /** * @dev Stores a new address in the ERC-1967 admin slot. */ function _setAdmin(address newAdmin) private { if (newAdmin == address(0)) { revert ERC1967InvalidAdmin(address(0)); } StorageSlot.getAddressSlot(ADMIN_SLOT).value = newAdmin; } /** * @dev Changes the admin of the proxy. * * Emits an {IERC1967-AdminChanged} event. */ function changeAdmin(address newAdmin) internal { emit IERC1967.AdminChanged(getAdmin(), newAdmin); _setAdmin(newAdmin); } /** * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy. * This is the keccak-256 hash of "eip1967.proxy.beacon" subtracted by 1. */ // solhint-disable-next-line private-vars-leading-underscore bytes32 internal constant BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50; /** * @dev Returns the current beacon. */ function getBeacon() internal view returns (address) { return StorageSlot.getAddressSlot(BEACON_SLOT).value; } /** * @dev Stores a new beacon in the ERC-1967 beacon slot. */ function _setBeacon(address newBeacon) private { if (newBeacon.code.length == 0) { revert ERC1967InvalidBeacon(newBeacon); } StorageSlot.getAddressSlot(BEACON_SLOT).value = newBeacon; address beaconImplementation = IBeacon(newBeacon).implementation(); if (beaconImplementation.code.length == 0) { revert ERC1967InvalidImplementation(beaconImplementation); } } /** * @dev Change the beacon and trigger a setup call if data is nonempty. * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected * to avoid stuck value in the contract. * * Emits an {IERC1967-BeaconUpgraded} event. * * CAUTION: Invoking this function has no effect on an instance of {BeaconProxy} since v5, since * it uses an immutable beacon without looking at the value of the ERC-1967 beacon slot for * efficiency. */ function upgradeBeaconToAndCall(address newBeacon, bytes memory data) internal { _setBeacon(newBeacon); emit IERC1967.BeaconUpgraded(newBeacon); if (data.length > 0) { Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data); } else { _checkNonPayable(); } } /** * @dev Reverts if `msg.value` is not zero. It can be used to avoid `msg.value` stuck in the contract * if an upgrade doesn't perform an initialization call. */ function _checkNonPayable() private { if (msg.value > 0) { revert ERC1967NonPayable(); } } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/IERC20.sol) pragma solidity ^0.8.20; /** * @dev Interface of the ERC-20 standard as defined in the ERC. */ interface IERC20 { /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval(address indexed owner, address indexed spender, uint256 value); /** * @dev Returns the value of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the value of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves a `value` amount of tokens from the caller's account to `to`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address to, uint256 value) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets a `value` amount of tokens as the allowance of `spender` over the * caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 value) external returns (bool); /** * @dev Moves a `value` amount of tokens from `from` to `to` using the * allowance mechanism. `value` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom(address from, address to, uint256 value) external returns (bool); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.1.0) (utils/Address.sol) pragma solidity ^0.8.20; import {Errors} from "./Errors.sol"; /** * @dev Collection of functions related to the address type */ library Address { /** * @dev There's no code at `target` (it is not a contract). */ error AddressEmptyCode(address target); /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { if (address(this).balance < amount) { revert Errors.InsufficientBalance(address(this).balance, amount); } (bool success, ) = recipient.call{value: amount}(""); if (!success) { revert Errors.FailedCall(); } } /** * @dev Performs a Solidity function call using a low level `call`. A * plain `call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason or custom error, it is bubbled * up by this function (like regular Solidity function calls). However, if * the call reverted with no returned reason, this function reverts with a * {Errors.FailedCall} error. * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCallWithValue(target, data, 0); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. */ function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) { if (address(this).balance < value) { revert Errors.InsufficientBalance(address(this).balance, value); } (bool success, bytes memory returndata) = target.call{value: value}(data); return verifyCallResultFromTarget(target, success, returndata); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { (bool success, bytes memory returndata) = target.staticcall(data); return verifyCallResultFromTarget(target, success, returndata); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a delegate call. */ function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) { (bool success, bytes memory returndata) = target.delegatecall(data); return verifyCallResultFromTarget(target, success, returndata); } /** * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target * was not a contract or bubbling up the revert reason (falling back to {Errors.FailedCall}) in case * of an unsuccessful call. */ function verifyCallResultFromTarget( address target, bool success, bytes memory returndata ) internal view returns (bytes memory) { if (!success) { _revert(returndata); } else { // only check if target is a contract if the call was successful and the return data is empty // otherwise we already know that it was a contract if (returndata.length == 0 && target.code.length == 0) { revert AddressEmptyCode(target); } return returndata; } } /** * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the * revert reason or with a default {Errors.FailedCall} error. */ function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) { if (!success) { _revert(returndata); } else { return returndata; } } /** * @dev Reverts with returndata if present. Otherwise reverts with {Errors.FailedCall}. */ function _revert(bytes memory returndata) private pure { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly assembly ("memory-safe") { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert Errors.FailedCall(); } } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.1.0) (utils/Errors.sol) pragma solidity ^0.8.20; /** * @dev Collection of common custom errors used in multiple contracts * * IMPORTANT: Backwards compatibility is not guaranteed in future versions of the library. * It is recommended to avoid relying on the error API for critical functionality. * * _Available since v5.1._ */ library Errors { /** * @dev The ETH balance of the account is not enough to perform the operation. */ error InsufficientBalance(uint256 balance, uint256 needed); /** * @dev A call to an address target failed. The target may have reverted. */ error FailedCall(); /** * @dev The deployment failed. */ error FailedDeployment(); /** * @dev A necessary precompile is missing. */ error MissingPrecompile(address); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.1.0) (utils/StorageSlot.sol) // This file was procedurally generated from scripts/generate/templates/StorageSlot.js. pragma solidity ^0.8.20; /** * @dev Library for reading and writing primitive types to specific storage slots. * * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts. * This library helps with reading and writing to such slots without the need for inline assembly. * * The functions in this library return Slot structs that contain a `value` member that can be used to read or write. * * Example usage to set ERC-1967 implementation slot: * ```solidity * contract ERC1967 { * // Define the slot. Alternatively, use the SlotDerivation library to derive the slot. * bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc; * * function _getImplementation() internal view returns (address) { * return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value; * } * * function _setImplementation(address newImplementation) internal { * require(newImplementation.code.length > 0); * StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation; * } * } * ``` * * TIP: Consider using this library along with {SlotDerivation}. */ library StorageSlot { struct AddressSlot { address value; } struct BooleanSlot { bool value; } struct Bytes32Slot { bytes32 value; } struct Uint256Slot { uint256 value; } struct Int256Slot { int256 value; } struct StringSlot { string value; } struct BytesSlot { bytes value; } /** * @dev Returns an `AddressSlot` with member `value` located at `slot`. */ function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) { assembly ("memory-safe") { r.slot := slot } } /** * @dev Returns a `BooleanSlot` with member `value` located at `slot`. */ function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) { assembly ("memory-safe") { r.slot := slot } } /** * @dev Returns a `Bytes32Slot` with member `value` located at `slot`. */ function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) { assembly ("memory-safe") { r.slot := slot } } /** * @dev Returns a `Uint256Slot` with member `value` located at `slot`. */ function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) { assembly ("memory-safe") { r.slot := slot } } /** * @dev Returns a `Int256Slot` with member `value` located at `slot`. */ function getInt256Slot(bytes32 slot) internal pure returns (Int256Slot storage r) { assembly ("memory-safe") { r.slot := slot } } /** * @dev Returns a `StringSlot` with member `value` located at `slot`. */ function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) { assembly ("memory-safe") { r.slot := slot } } /** * @dev Returns an `StringSlot` representation of the string storage pointer `store`. */ function getStringSlot(string storage store) internal pure returns (StringSlot storage r) { assembly ("memory-safe") { r.slot := store.slot } } /** * @dev Returns a `BytesSlot` with member `value` located at `slot`. */ function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) { assembly ("memory-safe") { r.slot := slot } } /** * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`. */ function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) { assembly ("memory-safe") { r.slot := store.slot } } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.1.0) (utils/structs/EnumerableMap.sol) // This file was procedurally generated from scripts/generate/templates/EnumerableMap.js. pragma solidity ^0.8.20; import {EnumerableSet} from "./EnumerableSet.sol"; /** * @dev Library for managing an enumerable variant of Solidity's * https://solidity.readthedocs.io/en/latest/types.html#mapping-types[`mapping`] * type. * * Maps have the following properties: * * - Entries are added, removed, and checked for existence in constant time * (O(1)). * - Entries are enumerated in O(n). No guarantees are made on the ordering. * * ```solidity * contract Example { * // Add the library methods * using EnumerableMap for EnumerableMap.UintToAddressMap; * * // Declare a set state variable * EnumerableMap.UintToAddressMap private myMap; * } * ``` * * The following map types are supported: * * - `uint256 -> address` (`UintToAddressMap`) since v3.0.0 * - `address -> uint256` (`AddressToUintMap`) since v4.6.0 * - `bytes32 -> bytes32` (`Bytes32ToBytes32Map`) since v4.6.0 * - `uint256 -> uint256` (`UintToUintMap`) since v4.7.0 * - `bytes32 -> uint256` (`Bytes32ToUintMap`) since v4.7.0 * - `uint256 -> bytes32` (`UintToBytes32Map`) since v5.1.0 * - `address -> address` (`AddressToAddressMap`) since v5.1.0 * - `address -> bytes32` (`AddressToBytes32Map`) since v5.1.0 * - `bytes32 -> address` (`Bytes32ToAddressMap`) since v5.1.0 * * [WARNING] * ==== * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure * unusable. * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info. * * In order to clean an EnumerableMap, you can either remove all elements one by one or create a fresh instance using an * array of EnumerableMap. * ==== */ library EnumerableMap { using EnumerableSet for EnumerableSet.Bytes32Set; // To implement this library for multiple types with as little code repetition as possible, we write it in // terms of a generic Map type with bytes32 keys and values. The Map implementation uses private functions, // and user-facing implementations such as `UintToAddressMap` are just wrappers around the underlying Map. // This means that we can only create new EnumerableMaps for types that fit in bytes32. /** * @dev Query for a nonexistent map key. */ error EnumerableMapNonexistentKey(bytes32 key); struct Bytes32ToBytes32Map { // Storage of keys EnumerableSet.Bytes32Set _keys; mapping(bytes32 key => bytes32) _values; } /** * @dev Adds a key-value pair to a map, or updates the value for an existing * key. O(1). * * Returns true if the key was added to the map, that is if it was not * already present. */ function set(Bytes32ToBytes32Map storage map, bytes32 key, bytes32 value) internal returns (bool) { map._values[key] = value; return map._keys.add(key); } /** * @dev Removes a key-value pair from a map. O(1). * * Returns true if the key was removed from the map, that is if it was present. */ function remove(Bytes32ToBytes32Map storage map, bytes32 key) internal returns (bool) { delete map._values[key]; return map._keys.remove(key); } /** * @dev Returns true if the key is in the map. O(1). */ function contains(Bytes32ToBytes32Map storage map, bytes32 key) internal view returns (bool) { return map._keys.contains(key); } /** * @dev Returns the number of key-value pairs in the map. O(1). */ function length(Bytes32ToBytes32Map storage map) internal view returns (uint256) { return map._keys.length(); } /** * @dev Returns the key-value pair stored at position `index` in the map. O(1). * * Note that there are no guarantees on the ordering of entries inside the * array, and it may change when more entries are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(Bytes32ToBytes32Map storage map, uint256 index) internal view returns (bytes32 key, bytes32 value) { bytes32 atKey = map._keys.at(index); return (atKey, map._values[atKey]); } /** * @dev Tries to returns the value associated with `key`. O(1). * Does not revert if `key` is not in the map. */ function tryGet(Bytes32ToBytes32Map storage map, bytes32 key) internal view returns (bool exists, bytes32 value) { bytes32 val = map._values[key]; if (val == bytes32(0)) { return (contains(map, key), bytes32(0)); } else { return (true, val); } } /** * @dev Returns the value associated with `key`. O(1). * * Requirements: * * - `key` must be in the map. */ function get(Bytes32ToBytes32Map storage map, bytes32 key) internal view returns (bytes32) { bytes32 value = map._values[key]; if (value == 0 && !contains(map, key)) { revert EnumerableMapNonexistentKey(key); } return value; } /** * @dev Return the an array containing all the keys * * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that * this function has an unbounded cost, and using it as part of a state-changing function may render the function * uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block. */ function keys(Bytes32ToBytes32Map storage map) internal view returns (bytes32[] memory) { return map._keys.values(); } // UintToUintMap struct UintToUintMap { Bytes32ToBytes32Map _inner; } /** * @dev Adds a key-value pair to a map, or updates the value for an existing * key. O(1). * * Returns true if the key was added to the map, that is if it was not * already present. */ function set(UintToUintMap storage map, uint256 key, uint256 value) internal returns (bool) { return set(map._inner, bytes32(key), bytes32(value)); } /** * @dev Removes a value from a map. O(1). * * Returns true if the key was removed from the map, that is if it was present. */ function remove(UintToUintMap storage map, uint256 key) internal returns (bool) { return remove(map._inner, bytes32(key)); } /** * @dev Returns true if the key is in the map. O(1). */ function contains(UintToUintMap storage map, uint256 key) internal view returns (bool) { return contains(map._inner, bytes32(key)); } /** * @dev Returns the number of elements in the map. O(1). */ function length(UintToUintMap storage map) internal view returns (uint256) { return length(map._inner); } /** * @dev Returns the element stored at position `index` in the map. O(1). * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(UintToUintMap storage map, uint256 index) internal view returns (uint256 key, uint256 value) { (bytes32 atKey, bytes32 val) = at(map._inner, index); return (uint256(atKey), uint256(val)); } /** * @dev Tries to returns the value associated with `key`. O(1). * Does not revert if `key` is not in the map. */ function tryGet(UintToUintMap storage map, uint256 key) internal view returns (bool exists, uint256 value) { (bool success, bytes32 val) = tryGet(map._inner, bytes32(key)); return (success, uint256(val)); } /** * @dev Returns the value associated with `key`. O(1). * * Requirements: * * - `key` must be in the map. */ function get(UintToUintMap storage map, uint256 key) internal view returns (uint256) { return uint256(get(map._inner, bytes32(key))); } /** * @dev Return the an array containing all the keys * * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that * this function has an unbounded cost, and using it as part of a state-changing function may render the function * uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block. */ function keys(UintToUintMap storage map) internal view returns (uint256[] memory) { bytes32[] memory store = keys(map._inner); uint256[] memory result; assembly ("memory-safe") { result := store } return result; } // UintToAddressMap struct UintToAddressMap { Bytes32ToBytes32Map _inner; } /** * @dev Adds a key-value pair to a map, or updates the value for an existing * key. O(1). * * Returns true if the key was added to the map, that is if it was not * already present. */ function set(UintToAddressMap storage map, uint256 key, address value) internal returns (bool) { return set(map._inner, bytes32(key), bytes32(uint256(uint160(value)))); } /** * @dev Removes a value from a map. O(1). * * Returns true if the key was removed from the map, that is if it was present. */ function remove(UintToAddressMap storage map, uint256 key) internal returns (bool) { return remove(map._inner, bytes32(key)); } /** * @dev Returns true if the key is in the map. O(1). */ function contains(UintToAddressMap storage map, uint256 key) internal view returns (bool) { return contains(map._inner, bytes32(key)); } /** * @dev Returns the number of elements in the map. O(1). */ function length(UintToAddressMap storage map) internal view returns (uint256) { return length(map._inner); } /** * @dev Returns the element stored at position `index` in the map. O(1). * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(UintToAddressMap storage map, uint256 index) internal view returns (uint256 key, address value) { (bytes32 atKey, bytes32 val) = at(map._inner, index); return (uint256(atKey), address(uint160(uint256(val)))); } /** * @dev Tries to returns the value associated with `key`. O(1). * Does not revert if `key` is not in the map. */ function tryGet(UintToAddressMap storage map, uint256 key) internal view returns (bool exists, address value) { (bool success, bytes32 val) = tryGet(map._inner, bytes32(key)); return (success, address(uint160(uint256(val)))); } /** * @dev Returns the value associated with `key`. O(1). * * Requirements: * * - `key` must be in the map. */ function get(UintToAddressMap storage map, uint256 key) internal view returns (address) { return address(uint160(uint256(get(map._inner, bytes32(key))))); } /** * @dev Return the an array containing all the keys * * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that * this function has an unbounded cost, and using it as part of a state-changing function may render the function * uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block. */ function keys(UintToAddressMap storage map) internal view returns (uint256[] memory) { bytes32[] memory store = keys(map._inner); uint256[] memory result; assembly ("memory-safe") { result := store } return result; } // UintToBytes32Map struct UintToBytes32Map { Bytes32ToBytes32Map _inner; } /** * @dev Adds a key-value pair to a map, or updates the value for an existing * key. O(1). * * Returns true if the key was added to the map, that is if it was not * already present. */ function set(UintToBytes32Map storage map, uint256 key, bytes32 value) internal returns (bool) { return set(map._inner, bytes32(key), value); } /** * @dev Removes a value from a map. O(1). * * Returns true if the key was removed from the map, that is if it was present. */ function remove(UintToBytes32Map storage map, uint256 key) internal returns (bool) { return remove(map._inner, bytes32(key)); } /** * @dev Returns true if the key is in the map. O(1). */ function contains(UintToBytes32Map storage map, uint256 key) internal view returns (bool) { return contains(map._inner, bytes32(key)); } /** * @dev Returns the number of elements in the map. O(1). */ function length(UintToBytes32Map storage map) internal view returns (uint256) { return length(map._inner); } /** * @dev Returns the element stored at position `index` in the map. O(1). * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(UintToBytes32Map storage map, uint256 index) internal view returns (uint256 key, bytes32 value) { (bytes32 atKey, bytes32 val) = at(map._inner, index); return (uint256(atKey), val); } /** * @dev Tries to returns the value associated with `key`. O(1). * Does not revert if `key` is not in the map. */ function tryGet(UintToBytes32Map storage map, uint256 key) internal view returns (bool exists, bytes32 value) { (bool success, bytes32 val) = tryGet(map._inner, bytes32(key)); return (success, val); } /** * @dev Returns the value associated with `key`. O(1). * * Requirements: * * - `key` must be in the map. */ function get(UintToBytes32Map storage map, uint256 key) internal view returns (bytes32) { return get(map._inner, bytes32(key)); } /** * @dev Return the an array containing all the keys * * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that * this function has an unbounded cost, and using it as part of a state-changing function may render the function * uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block. */ function keys(UintToBytes32Map storage map) internal view returns (uint256[] memory) { bytes32[] memory store = keys(map._inner); uint256[] memory result; assembly ("memory-safe") { result := store } return result; } // AddressToUintMap struct AddressToUintMap { Bytes32ToBytes32Map _inner; } /** * @dev Adds a key-value pair to a map, or updates the value for an existing * key. O(1). * * Returns true if the key was added to the map, that is if it was not * already present. */ function set(AddressToUintMap storage map, address key, uint256 value) internal returns (bool) { return set(map._inner, bytes32(uint256(uint160(key))), bytes32(value)); } /** * @dev Removes a value from a map. O(1). * * Returns true if the key was removed from the map, that is if it was present. */ function remove(AddressToUintMap storage map, address key) internal returns (bool) { return remove(map._inner, bytes32(uint256(uint160(key)))); } /** * @dev Returns true if the key is in the map. O(1). */ function contains(AddressToUintMap storage map, address key) internal view returns (bool) { return contains(map._inner, bytes32(uint256(uint160(key)))); } /** * @dev Returns the number of elements in the map. O(1). */ function length(AddressToUintMap storage map) internal view returns (uint256) { return length(map._inner); } /** * @dev Returns the element stored at position `index` in the map. O(1). * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(AddressToUintMap storage map, uint256 index) internal view returns (address key, uint256 value) { (bytes32 atKey, bytes32 val) = at(map._inner, index); return (address(uint160(uint256(atKey))), uint256(val)); } /** * @dev Tries to returns the value associated with `key`. O(1). * Does not revert if `key` is not in the map. */ function tryGet(AddressToUintMap storage map, address key) internal view returns (bool exists, uint256 value) { (bool success, bytes32 val) = tryGet(map._inner, bytes32(uint256(uint160(key)))); return (success, uint256(val)); } /** * @dev Returns the value associated with `key`. O(1). * * Requirements: * * - `key` must be in the map. */ function get(AddressToUintMap storage map, address key) internal view returns (uint256) { return uint256(get(map._inner, bytes32(uint256(uint160(key))))); } /** * @dev Return the an array containing all the keys * * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that * this function has an unbounded cost, and using it as part of a state-changing function may render the function * uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block. */ function keys(AddressToUintMap storage map) internal view returns (address[] memory) { bytes32[] memory store = keys(map._inner); address[] memory result; assembly ("memory-safe") { result := store } return result; } // AddressToAddressMap struct AddressToAddressMap { Bytes32ToBytes32Map _inner; } /** * @dev Adds a key-value pair to a map, or updates the value for an existing * key. O(1). * * Returns true if the key was added to the map, that is if it was not * already present. */ function set(AddressToAddressMap storage map, address key, address value) internal returns (bool) { return set(map._inner, bytes32(uint256(uint160(key))), bytes32(uint256(uint160(value)))); } /** * @dev Removes a value from a map. O(1). * * Returns true if the key was removed from the map, that is if it was present. */ function remove(AddressToAddressMap storage map, address key) internal returns (bool) { return remove(map._inner, bytes32(uint256(uint160(key)))); } /** * @dev Returns true if the key is in the map. O(1). */ function contains(AddressToAddressMap storage map, address key) internal view returns (bool) { return contains(map._inner, bytes32(uint256(uint160(key)))); } /** * @dev Returns the number of elements in the map. O(1). */ function length(AddressToAddressMap storage map) internal view returns (uint256) { return length(map._inner); } /** * @dev Returns the element stored at position `index` in the map. O(1). * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(AddressToAddressMap storage map, uint256 index) internal view returns (address key, address value) { (bytes32 atKey, bytes32 val) = at(map._inner, index); return (address(uint160(uint256(atKey))), address(uint160(uint256(val)))); } /** * @dev Tries to returns the value associated with `key`. O(1). * Does not revert if `key` is not in the map. */ function tryGet(AddressToAddressMap storage map, address key) internal view returns (bool exists, address value) { (bool success, bytes32 val) = tryGet(map._inner, bytes32(uint256(uint160(key)))); return (success, address(uint160(uint256(val)))); } /** * @dev Returns the value associated with `key`. O(1). * * Requirements: * * - `key` must be in the map. */ function get(AddressToAddressMap storage map, address key) internal view returns (address) { return address(uint160(uint256(get(map._inner, bytes32(uint256(uint160(key))))))); } /** * @dev Return the an array containing all the keys * * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that * this function has an unbounded cost, and using it as part of a state-changing function may render the function * uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block. */ function keys(AddressToAddressMap storage map) internal view returns (address[] memory) { bytes32[] memory store = keys(map._inner); address[] memory result; assembly ("memory-safe") { result := store } return result; } // AddressToBytes32Map struct AddressToBytes32Map { Bytes32ToBytes32Map _inner; } /** * @dev Adds a key-value pair to a map, or updates the value for an existing * key. O(1). * * Returns true if the key was added to the map, that is if it was not * already present. */ function set(AddressToBytes32Map storage map, address key, bytes32 value) internal returns (bool) { return set(map._inner, bytes32(uint256(uint160(key))), value); } /** * @dev Removes a value from a map. O(1). * * Returns true if the key was removed from the map, that is if it was present. */ function remove(AddressToBytes32Map storage map, address key) internal returns (bool) { return remove(map._inner, bytes32(uint256(uint160(key)))); } /** * @dev Returns true if the key is in the map. O(1). */ function contains(AddressToBytes32Map storage map, address key) internal view returns (bool) { return contains(map._inner, bytes32(uint256(uint160(key)))); } /** * @dev Returns the number of elements in the map. O(1). */ function length(AddressToBytes32Map storage map) internal view returns (uint256) { return length(map._inner); } /** * @dev Returns the element stored at position `index` in the map. O(1). * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(AddressToBytes32Map storage map, uint256 index) internal view returns (address key, bytes32 value) { (bytes32 atKey, bytes32 val) = at(map._inner, index); return (address(uint160(uint256(atKey))), val); } /** * @dev Tries to returns the value associated with `key`. O(1). * Does not revert if `key` is not in the map. */ function tryGet(AddressToBytes32Map storage map, address key) internal view returns (bool exists, bytes32 value) { (bool success, bytes32 val) = tryGet(map._inner, bytes32(uint256(uint160(key)))); return (success, val); } /** * @dev Returns the value associated with `key`. O(1). * * Requirements: * * - `key` must be in the map. */ function get(AddressToBytes32Map storage map, address key) internal view returns (bytes32) { return get(map._inner, bytes32(uint256(uint160(key)))); } /** * @dev Return the an array containing all the keys * * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that * this function has an unbounded cost, and using it as part of a state-changing function may render the function * uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block. */ function keys(AddressToBytes32Map storage map) internal view returns (address[] memory) { bytes32[] memory store = keys(map._inner); address[] memory result; assembly ("memory-safe") { result := store } return result; } // Bytes32ToUintMap struct Bytes32ToUintMap { Bytes32ToBytes32Map _inner; } /** * @dev Adds a key-value pair to a map, or updates the value for an existing * key. O(1). * * Returns true if the key was added to the map, that is if it was not * already present. */ function set(Bytes32ToUintMap storage map, bytes32 key, uint256 value) internal returns (bool) { return set(map._inner, key, bytes32(value)); } /** * @dev Removes a value from a map. O(1). * * Returns true if the key was removed from the map, that is if it was present. */ function remove(Bytes32ToUintMap storage map, bytes32 key) internal returns (bool) { return remove(map._inner, key); } /** * @dev Returns true if the key is in the map. O(1). */ function contains(Bytes32ToUintMap storage map, bytes32 key) internal view returns (bool) { return contains(map._inner, key); } /** * @dev Returns the number of elements in the map. O(1). */ function length(Bytes32ToUintMap storage map) internal view returns (uint256) { return length(map._inner); } /** * @dev Returns the element stored at position `index` in the map. O(1). * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(Bytes32ToUintMap storage map, uint256 index) internal view returns (bytes32 key, uint256 value) { (bytes32 atKey, bytes32 val) = at(map._inner, index); return (atKey, uint256(val)); } /** * @dev Tries to returns the value associated with `key`. O(1). * Does not revert if `key` is not in the map. */ function tryGet(Bytes32ToUintMap storage map, bytes32 key) internal view returns (bool exists, uint256 value) { (bool success, bytes32 val) = tryGet(map._inner, key); return (success, uint256(val)); } /** * @dev Returns the value associated with `key`. O(1). * * Requirements: * * - `key` must be in the map. */ function get(Bytes32ToUintMap storage map, bytes32 key) internal view returns (uint256) { return uint256(get(map._inner, key)); } /** * @dev Return the an array containing all the keys * * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that * this function has an unbounded cost, and using it as part of a state-changing function may render the function * uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block. */ function keys(Bytes32ToUintMap storage map) internal view returns (bytes32[] memory) { bytes32[] memory store = keys(map._inner); bytes32[] memory result; assembly ("memory-safe") { result := store } return result; } // Bytes32ToAddressMap struct Bytes32ToAddressMap { Bytes32ToBytes32Map _inner; } /** * @dev Adds a key-value pair to a map, or updates the value for an existing * key. O(1). * * Returns true if the key was added to the map, that is if it was not * already present. */ function set(Bytes32ToAddressMap storage map, bytes32 key, address value) internal returns (bool) { return set(map._inner, key, bytes32(uint256(uint160(value)))); } /** * @dev Removes a value from a map. O(1). * * Returns true if the key was removed from the map, that is if it was present. */ function remove(Bytes32ToAddressMap storage map, bytes32 key) internal returns (bool) { return remove(map._inner, key); } /** * @dev Returns true if the key is in the map. O(1). */ function contains(Bytes32ToAddressMap storage map, bytes32 key) internal view returns (bool) { return contains(map._inner, key); } /** * @dev Returns the number of elements in the map. O(1). */ function length(Bytes32ToAddressMap storage map) internal view returns (uint256) { return length(map._inner); } /** * @dev Returns the element stored at position `index` in the map. O(1). * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(Bytes32ToAddressMap storage map, uint256 index) internal view returns (bytes32 key, address value) { (bytes32 atKey, bytes32 val) = at(map._inner, index); return (atKey, address(uint160(uint256(val)))); } /** * @dev Tries to returns the value associated with `key`. O(1). * Does not revert if `key` is not in the map. */ function tryGet(Bytes32ToAddressMap storage map, bytes32 key) internal view returns (bool exists, address value) { (bool success, bytes32 val) = tryGet(map._inner, key); return (success, address(uint160(uint256(val)))); } /** * @dev Returns the value associated with `key`. O(1). * * Requirements: * * - `key` must be in the map. */ function get(Bytes32ToAddressMap storage map, bytes32 key) internal view returns (address) { return address(uint160(uint256(get(map._inner, key)))); } /** * @dev Return the an array containing all the keys * * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that * this function has an unbounded cost, and using it as part of a state-changing function may render the function * uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block. */ function keys(Bytes32ToAddressMap storage map) internal view returns (bytes32[] memory) { bytes32[] memory store = keys(map._inner); bytes32[] memory result; assembly ("memory-safe") { result := store } return result; } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.1.0) (utils/structs/EnumerableSet.sol) // This file was procedurally generated from scripts/generate/templates/EnumerableSet.js. pragma solidity ^0.8.20; /** * @dev Library for managing * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive * types. * * Sets have the following properties: * * - Elements are added, removed, and checked for existence in constant time * (O(1)). * - Elements are enumerated in O(n). No guarantees are made on the ordering. * * ```solidity * contract Example { * // Add the library methods * using EnumerableSet for EnumerableSet.AddressSet; * * // Declare a set state variable * EnumerableSet.AddressSet private mySet; * } * ``` * * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`) * and `uint256` (`UintSet`) are supported. * * [WARNING] * ==== * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure * unusable. * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info. * * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an * array of EnumerableSet. * ==== */ library EnumerableSet { // To implement this library for multiple types with as little code // repetition as possible, we write it in terms of a generic Set type with // bytes32 values. // The Set implementation uses private functions, and user-facing // implementations (such as AddressSet) are just wrappers around the // underlying Set. // This means that we can only create new EnumerableSets for types that fit // in bytes32. struct Set { // Storage of set values bytes32[] _values; // Position is the index of the value in the `values` array plus 1. // Position 0 is used to mean a value is not in the set. mapping(bytes32 value => uint256) _positions; } /** * @dev Add a value to a set. O(1). * * Returns true if the value was added to the set, that is if it was not * already present. */ function _add(Set storage set, bytes32 value) private returns (bool) { if (!_contains(set, value)) { set._values.push(value); // The value is stored at length-1, but we add 1 to all indexes // and use 0 as a sentinel value set._positions[value] = set._values.length; return true; } else { return false; } } /** * @dev Removes a value from a set. O(1). * * Returns true if the value was removed from the set, that is if it was * present. */ function _remove(Set storage set, bytes32 value) private returns (bool) { // We cache the value's position to prevent multiple reads from the same storage slot uint256 position = set._positions[value]; if (position != 0) { // Equivalent to contains(set, value) // To delete an element from the _values array in O(1), we swap the element to delete with the last one in // the array, and then remove the last element (sometimes called as 'swap and pop'). // This modifies the order of the array, as noted in {at}. uint256 valueIndex = position - 1; uint256 lastIndex = set._values.length - 1; if (valueIndex != lastIndex) { bytes32 lastValue = set._values[lastIndex]; // Move the lastValue to the index where the value to delete is set._values[valueIndex] = lastValue; // Update the tracked position of the lastValue (that was just moved) set._positions[lastValue] = position; } // Delete the slot where the moved value was stored set._values.pop(); // Delete the tracked position for the deleted slot delete set._positions[value]; return true; } else { return false; } } /** * @dev Returns true if the value is in the set. O(1). */ function _contains(Set storage set, bytes32 value) private view returns (bool) { return set._positions[value] != 0; } /** * @dev Returns the number of values on the set. O(1). */ function _length(Set storage set) private view returns (uint256) { return set._values.length; } /** * @dev Returns the value stored at position `index` in the set. O(1). * * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function _at(Set storage set, uint256 index) private view returns (bytes32) { return set._values[index]; } /** * @dev Return the entire set in an array * * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that * this function has an unbounded cost, and using it as part of a state-changing function may render the function * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block. */ function _values(Set storage set) private view returns (bytes32[] memory) { return set._values; } // Bytes32Set struct Bytes32Set { Set _inner; } /** * @dev Add a value to a set. O(1). * * Returns true if the value was added to the set, that is if it was not * already present. */ function add(Bytes32Set storage set, bytes32 value) internal returns (bool) { return _add(set._inner, value); } /** * @dev Removes a value from a set. O(1). * * Returns true if the value was removed from the set, that is if it was * present. */ function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) { return _remove(set._inner, value); } /** * @dev Returns true if the value is in the set. O(1). */ function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) { return _contains(set._inner, value); } /** * @dev Returns the number of values in the set. O(1). */ function length(Bytes32Set storage set) internal view returns (uint256) { return _length(set._inner); } /** * @dev Returns the value stored at position `index` in the set. O(1). * * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) { return _at(set._inner, index); } /** * @dev Return the entire set in an array * * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that * this function has an unbounded cost, and using it as part of a state-changing function may render the function * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block. */ function values(Bytes32Set storage set) internal view returns (bytes32[] memory) { bytes32[] memory store = _values(set._inner); bytes32[] memory result; assembly ("memory-safe") { result := store } return result; } // AddressSet struct AddressSet { Set _inner; } /** * @dev Add a value to a set. O(1). * * Returns true if the value was added to the set, that is if it was not * already present. */ function add(AddressSet storage set, address value) internal returns (bool) { return _add(set._inner, bytes32(uint256(uint160(value)))); } /** * @dev Removes a value from a set. O(1). * * Returns true if the value was removed from the set, that is if it was * present. */ function remove(AddressSet storage set, address value) internal returns (bool) { return _remove(set._inner, bytes32(uint256(uint160(value)))); } /** * @dev Returns true if the value is in the set. O(1). */ function contains(AddressSet storage set, address value) internal view returns (bool) { return _contains(set._inner, bytes32(uint256(uint160(value)))); } /** * @dev Returns the number of values in the set. O(1). */ function length(AddressSet storage set) internal view returns (uint256) { return _length(set._inner); } /** * @dev Returns the value stored at position `index` in the set. O(1). * * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(AddressSet storage set, uint256 index) internal view returns (address) { return address(uint160(uint256(_at(set._inner, index)))); } /** * @dev Return the entire set in an array * * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that * this function has an unbounded cost, and using it as part of a state-changing function may render the function * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block. */ function values(AddressSet storage set) internal view returns (address[] memory) { bytes32[] memory store = _values(set._inner); address[] memory result; assembly ("memory-safe") { result := store } return result; } // UintSet struct UintSet { Set _inner; } /** * @dev Add a value to a set. O(1). * * Returns true if the value was added to the set, that is if it was not * already present. */ function add(UintSet storage set, uint256 value) internal returns (bool) { return _add(set._inner, bytes32(value)); } /** * @dev Removes a value from a set. O(1). * * Returns true if the value was removed from the set, that is if it was * present. */ function remove(UintSet storage set, uint256 value) internal returns (bool) { return _remove(set._inner, bytes32(value)); } /** * @dev Returns true if the value is in the set. O(1). */ function contains(UintSet storage set, uint256 value) internal view returns (bool) { return _contains(set._inner, bytes32(value)); } /** * @dev Returns the number of values in the set. O(1). */ function length(UintSet storage set) internal view returns (uint256) { return _length(set._inner); } /** * @dev Returns the value stored at position `index` in the set. O(1). * * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(UintSet storage set, uint256 index) internal view returns (uint256) { return uint256(_at(set._inner, index)); } /** * @dev Return the entire set in an array * * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that * this function has an unbounded cost, and using it as part of a state-changing function may render the function * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block. */ function values(UintSet storage set) internal view returns (uint256[] memory) { bytes32[] memory store = _values(set._inner); uint256[] memory result; assembly ("memory-safe") { result := store } return result; } }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.28; import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol"; interface IBrushToken is IERC20 { function burn(uint256 amount) external; function burnFrom(address account, uint256 amount) external; function transferFromBulk(address from, address[] calldata tos, uint256[] calldata amounts) external; function transferOwnership(address newOwner) external; }
{ "evmVersion": "cancun", "optimizer": { "enabled": true, "runs": 9999999, "details": { "yul": true } }, "viaIR": true, "outputSelection": { "*": { "*": [ "evm.bytecode", "evm.deployedBytecode", "devdoc", "userdoc", "metadata", "abi" ] } }, "metadata": { "useLiteralContent": true }, "libraries": {} }
Contract Security Audit
- No Contract Security Audit Submitted- Submit Audit Here
[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"implementation","type":"address"}],"name":"ERC1967InvalidImplementation","type":"error"},{"inputs":[],"name":"ERC1967NonPayable","type":"error"},{"inputs":[],"name":"FailedCall","type":"error"},{"inputs":[],"name":"InvalidInitialization","type":"error"},{"inputs":[],"name":"LengthMismatch","type":"error"},{"inputs":[],"name":"NotInitializing","type":"error"},{"inputs":[],"name":"OnlySpenders","type":"error"},{"inputs":[],"name":"OnlyTerritories","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"inputs":[{"internalType":"uint256","name":"percent","type":"uint256"}],"name":"TotalPercentageNot100","type":"error"},{"inputs":[],"name":"UUPSUnauthorizedCallContext","type":"error"},{"inputs":[{"internalType":"bytes32","name":"slot","type":"bytes32"}],"name":"UUPSUnsupportedProxiableUUID","type":"error"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint64","name":"version","type":"uint64"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address[]","name":"accounts","type":"address[]"},{"indexed":false,"internalType":"uint256[]","name":"percentages","type":"uint256[]"}],"name":"SetFundAllocationPercentages","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"implementation","type":"address"}],"name":"Upgraded","type":"event"},{"inputs":[],"name":"UPGRADE_INTERFACE_VERSION","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IBrushToken","name":"brush","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"proxiableUUID","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address[]","name":"accounts","type":"address[]"},{"internalType":"uint256[]","name":"percentages","type":"uint256[]"}],"name":"setFundAllocationPercentages","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address[]","name":"spenders","type":"address[]"},{"internalType":"bool","name":"isSpender","type":"bool"}],"name":"setSpenders","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amountBrush","type":"uint256"}],"name":"spend","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"totalClaimable","outputs":[{"internalType":"uint256","name":"total","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newImplementation","type":"address"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"upgradeToAndCall","outputs":[],"stateMutability":"payable","type":"function"}]
Contract Creation Code
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
Deployed Bytecode
0x60806040526004361015610011575f80fd5b5f3560e01c80631dfce5c614610e375780632370a62c14610d635780634f1ef28614610a0157806352d1902d14610944578063715018a61461086a578063786209571461058c5780638da5cb5b1461051c578063ad3cb1cc1461046a578063af7d6ca314610350578063c4d66de8146100df5763f2fde38b14610092575f80fd5b346100db5760207ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffc3601126100db576100d96100cc610e80565b6100d461116b565b61107e565b005b5f80fd5b346100db5760207ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffc3601126100db5760043573ffffffffffffffffffffffffffffffffffffffff81168091036100db577ff0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00549060ff8260401c16159167ffffffffffffffff811680159081610348575b600114908161033e575b159081610335575b5061030d578260017fffffffffffffffffffffffffffffffffffffffffffffffff00000000000000008316177ff0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00556102b8575b506101dd611208565b6101e5611208565b6101ee3361107e565b6101f6611208565b7fffffffffffffffffffffffff0000000000000000000000000000000000000000600354161760035561022557005b7fffffffffffffffffffffffffffffffffffffffffffffff00ffffffffffffffff7ff0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a0054167ff0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00557fc7f505b2f371ae2175ee4913f4499e1f2633a7b5936321eed1cdaeb6115181d2602060405160018152a1005b7fffffffffffffffffffffffffffffffffffffffffffffff0000000000000000001668010000000000000001177ff0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a0055826101d4565b7ff92ee8a9000000000000000000000000000000000000000000000000000000005f5260045ffd5b90501584610181565b303b159150610179565b84915061016f565b346100db5760407ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffc3601126100db57610387610e80565b335f52600560205260ff60405f2054161561044257602073ffffffffffffffffffffffffffffffffffffffff60448160035416935f60405195869485937fa9059cbb00000000000000000000000000000000000000000000000000000000855216600484015260243560248401525af180156104375761040357005b6020813d60201161042f575b8161041c60209383610ed4565b810103126100db5751801515036100db57005b3d915061040f565b6040513d5f823e3d90fd5b7fc6d2ac52000000000000000000000000000000000000000000000000000000005f5260045ffd5b346100db575f7ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffc3601126100db5760408051906104a78183610ed4565b6005825260208201917f352e302e3000000000000000000000000000000000000000000000000000000083527fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe0601f8351948593602085525180918160208701528686015e5f85828601015201168101030190f35b346100db575f7ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffc3601126100db57602073ffffffffffffffffffffffffffffffffffffffff7f9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c1993005416604051908152f35b346100db5760407ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffc3601126100db5760043567ffffffffffffffff81116100db576105db903690600401610ea3565b60243567ffffffffffffffff81116100db576105fb903690600401610ea3565b61060693919361116b565b808303610842575f5f545f5b8181106107b45750505f5b84811061071b5750606481036106f0575060405192806040850160408652526060840192905f905b8082106106b85750505082820360208401528082527f07ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff81116100db577f83a57bf10f0a357c240171b2338859a3cab604f18998cd574385400925a9878693602092849260051b80928583013701030190a1005b90919384359073ffffffffffffffffffffffffffffffffffffffff82168092036100db57602081600193829352019501920190610645565b7fc3a9fc2a000000000000000000000000000000000000000000000000000000005f5260045260245ffd5b9061076861073261072d84888861104d565b61105d565b73ffffffffffffffffffffffffffffffffffffffff61075285878b61104d565b35911690815f52600260205260405f2055611495565b5061077482848861104d565b358101809111610787579060010161061d565b7f4e487b71000000000000000000000000000000000000000000000000000000005f52601160045260245ffd5b5f5415610815577f290decd9548b62a8d60345a988386fc84ba6bc95484008f6362f93160ef3e56354600260205273ffffffffffffffffffffffffffffffffffffffff165f81815260408120556001919061080e9061130d565b5001610612565b7f4e487b71000000000000000000000000000000000000000000000000000000005f52603260045260245ffd5b7fff633a38000000000000000000000000000000000000000000000000000000005f5260045ffd5b346100db575f7ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffc3601126100db576108a061116b565b5f73ffffffffffffffffffffffffffffffffffffffff7f9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c199300547fffffffffffffffffffffffff000000000000000000000000000000000000000081167f9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c19930055167f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e08280a3005b346100db575f7ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffc3601126100db5773ffffffffffffffffffffffffffffffffffffffff7f00000000000000000000000055f4246b7d50b785c580c5ef79a9bcef062e49441630036109d95760206040517f360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc8152f35b7fe07c8dba000000000000000000000000000000000000000000000000000000005f5260045ffd5b60407ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffc3601126100db57610a33610e80565b6024359067ffffffffffffffff82116100db57366023830112156100db57816004013590610a6082610f42565b91610a6e6040519384610ed4565b808352602083019336602483830101116100db57815f9260246020930187378401015273ffffffffffffffffffffffffffffffffffffffff7f00000000000000000000000055f4246b7d50b785c580c5ef79a9bcef062e494416803014908115610d21575b506109d957610ae061116b565b73ffffffffffffffffffffffffffffffffffffffff8116926040517f52d1902d000000000000000000000000000000000000000000000000000000008152602081600481885afa5f9181610ced575b50610b6057847f4c9c8ce3000000000000000000000000000000000000000000000000000000005f5260045260245ffd5b807f360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc869203610cc25750823b15610c9757807fffffffffffffffffffffffff00000000000000000000000000000000000000007f360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc5416177f360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc557fbc7cd75a20ee27fd9adebab32041f755214dbc6bffa90cc0225b39da2e5c2d3b5f80a2825115610c65575f80916100d9945190845af43d15610c5d573d91610c4183610f42565b92610c4f6040519485610ed4565b83523d5f602085013e61125f565b60609161125f565b50505034610c6f57005b7fb398979f000000000000000000000000000000000000000000000000000000005f5260045ffd5b7f4c9c8ce3000000000000000000000000000000000000000000000000000000005f5260045260245ffd5b7faa1d49a4000000000000000000000000000000000000000000000000000000005f5260045260245ffd5b9091506020813d602011610d19575b81610d0960209383610ed4565b810103126100db57519086610b2f565b3d9150610cfc565b905073ffffffffffffffffffffffffffffffffffffffff7f360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc5416141584610ad3565b346100db5760407ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffc3601126100db5760043567ffffffffffffffff81116100db57610db2903690600401610ea3565b602435908115158092036100db5790610dc961116b565b60ff165f5b828110610dd757005b8073ffffffffffffffffffffffffffffffffffffffff610dfd61072d600194878961104d565b165f52600560205260405f20837fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff0082541617905501610dce565b346100db5760207ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffc3601126100db576020610e78610e73610e80565b610f7c565b604051908152f35b6004359073ffffffffffffffffffffffffffffffffffffffff821682036100db57565b9181601f840112156100db5782359167ffffffffffffffff83116100db576020808501948460051b0101116100db57565b90601f7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe0910116810190811067ffffffffffffffff821117610f1557604052565b7f4e487b71000000000000000000000000000000000000000000000000000000005f52604160045260245ffd5b67ffffffffffffffff8111610f1557601f017fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe01660200190565b73ffffffffffffffffffffffffffffffffffffffff610f9b91166111d7565b9015611048576024602073ffffffffffffffffffffffffffffffffffffffff60035416604051928380927f70a082310000000000000000000000000000000000000000000000000000000082523060048301525afa908115610437575f91611016575b50818102918183041490151715610787576064900490565b90506020813d602011611040575b8161103160209383610ed4565b810103126100db57515f610ffe565b3d9150611024565b505f90565b91908110156108155760051b0190565b3573ffffffffffffffffffffffffffffffffffffffff811681036100db5790565b73ffffffffffffffffffffffffffffffffffffffff16801561113f5773ffffffffffffffffffffffffffffffffffffffff7f9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c19930054827fffffffffffffffffffffffff00000000000000000000000000000000000000008216177f9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c19930055167f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e05f80a3565b7f1e4fbdf7000000000000000000000000000000000000000000000000000000005f525f60045260245ffd5b73ffffffffffffffffffffffffffffffffffffffff7f9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c199300541633036111ab57565b7f118cdaa7000000000000000000000000000000000000000000000000000000005f523360045260245ffd5b805f52600260205260405f205480155f1461120057505f52600160205260405f20541515905f90565b600192909150565b60ff7ff0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a005460401c161561123757565b7fd7e6bcf8000000000000000000000000000000000000000000000000000000005f5260045ffd5b9061129c575080511561127457805190602001fd5b7fd6bda275000000000000000000000000000000000000000000000000000000005f5260045ffd5b815115806112ef575b6112ad575090565b73ffffffffffffffffffffffffffffffffffffffff907f9996b315000000000000000000000000000000000000000000000000000000005f521660045260245ffd5b50803b156112a5565b8054821015610815575f5260205f2001905f90565b5f81815260016020526040902054801561148f577fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff8101818111610787575f54907fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff820191821161078757818103611424575b5050505f5480156113f7577fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff016113b7815f6112f8565b7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff82549160031b1b191690555f555f5260016020525f6040812055600190565b7f4e487b71000000000000000000000000000000000000000000000000000000005f52603160045260245ffd5b611479611434611444935f6112f8565b90549060031b1c9283925f6112f8565b81939154907fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff9060031b92831b921b19161790565b90555f52600160205260405f20555f8080611380565b50505f90565b805f52600160205260405f2054155f14611048575f5468010000000000000000811015610f15576114d06114448260018594015f555f6112f8565b90555f54905f52600160205260405f205560019056fea26469706673582212202e65d1d4c1160e6f2fdc0841523cc42e905a29945a8e0003998996dc2af7035564736f6c634300081c0033
Loading...
Loading
Loading...
Loading
Multichain Portfolio | 30 Chains
Chain | Token | Portfolio % | Price | Amount | Value |
---|
A contract address hosts a smart contract, which is a set of code stored on the blockchain that runs when predetermined conditions are met. Learn more about addresses in our Knowledge Base.